Description and implementation of cut calculation-method in a sawmill

Työn tavoitteena oli kuvata ja ottaa käyttöön sahauseräkohtaisen kannattavuuden laskentamenetelmä sahalle, sekä tehdä laskentamalli menetelmän tueksi. Sahauksen peruskäsitteiden jälkeen työssä on esitelty sahan tuotantoprosessi. Tuotantoprosessi on kuvattu kirjallisuuden ja asiantuntijoiden haastattelujen perusteella. Seuraavaksi kartoitettiin hyötyjä ja vaikutuksia, mitä laskentamenetelmältä odotetaan.. Kustannuslaskennan teoriaa selvitettiin kirjallisuuslähteitä käyttäen silmälläpitäen juuri tätä kehitettävää laskentamenetelmää. Lisäksi esiteltiin Uimaharjun sahalla käytettävät ja laskentaan liittyvät laskenta- ja tietojärjestelmät.Nykyisin sahalla ei ole minkäänlaista menetelmää sahauseräkohtaisen tuloksen laskemiseksi. Pienillä muutoksilla sahan tietojärjestelmään ja prosessikoneisiin voidaan sahauserä kuljettaa prosessin läpi niin, että jokaisessa prosessin vaiheessa sille saadaan kohdistettua tuotantotietoa. Eri vaiheista saatua tietoa käyttämällä saadaan tarkasti määritettyä tuotteet, joita sahauserä tuotti ja paljonko tuotantoresursseja tuottamiseen kului. Laskentamalliin syötetään tuotantotietoja ja kustannustietoa ja saadaan vastaukseksi sahauserän taloudellinen tulos.Toimenpide ehdotuksena esitetään lisätutkimusta tuotantotietojen automaattisesta keräämisestä manuaalisen työn ja virheiden poistamiseksi. Suhteellisen pienillä panoksilla voidaan jokaiselle sahauserälle kerätä tuotantotiedot täysin automaattisesti. Lisäksi kehittämäni laskentamallin tilalle tulisi hankkia sovellus, joka käyttäisi paremmin hyväksi nykyisiä tietojärjestelmiä ja poistaisi manuaalisen työvaiheen laskennassa.

Development of Furnace Model for Bubbling Fluidized Bed Boiler

The aim of this thesis was to develop a model, which can predict heat transfer, heat release distribution and vertical temperature profile of gas phase in the furnace of a bubbling fluidized bed (BFB) boiler. The model is based on three separate model components that take care of heat transfer, heat release distribution and mass and energy balance calculations taking into account the boiler design and operating conditions. The model was successfully validated by solving the model parameters on the basis of commercial size BFB boiler test run information and by performing parametric studies with the model. Implementation of the developed model for the Foster Wheeler BFB design procedures will require model validation with existing BFB database and possibly more detailed measurements at the commercial size BFB boilers.

The Swiss reform of the allocation of tasks : The conventions-programs as a new partnership model for vertical cooperation ?

This research examines the impacts of the Swiss reform of the allocation of tasks which was accepted in 2004 and implemented in 2008 to "re-assign" the responsibilities between the federal government and the cantons. The public tasks were redistributed, according to the leading and fundamental principle of subsidiarity. Seven tasks came under exclusive federal responsibility; ten came under the control of the cantons; and twenty-two "common tasks" were allocated to both the Confederation and the cantons. For these common tasks it wasn't possible to separate the management and the implementation. In order to deal with nineteen of them, the reform introduced the conventions-programs (CPs), which are public law contracts signed by the Confederation with each canton. These CPs are generally valid for periods of four years (2008-11, 2012-15 and 2016-19, respectively). The third period is currently being prepared. By using the principal-agent theory I examine how contracts can improve political relations between a principal (Confederation) and an agent (canton). I also provide a first qualitative analysis by examining the impacts of these contracts on the vertical cooperation and on the implication of different actors by focusing my study on five CPs - protection of cultural heritage and conservation of historic monuments, encouragement of the integration of foreigners, economic development, protection against noise and protection of the nature and landscape - applied in five cantons, which represents twenty-five cases studies.

Diffusion of Administrative Innovation: TQM Implementation and Effectiveness in a Global

The main objective of this dissertation is to create new knowledge on an administrative innovation, its adoption, diffusion and finally its effectiveness. In this dissertation the administrative innovation is approached through a widely utilized management philosophy, namely the total quality management (TQM) strategy. TQM operationalizes a self-assessment procedure, which is based on continual improvement principles and measuring the improvements. This dissertation also captures the theme of change management as it analyzes the adoption and diffusion of the administrative innovation. It identifies innovation characteristics as well as organisational and individual factors explaining the adoption and implementation. As a special feature, this study also explores the effectiveness of the innovation based on objective data. For studying the administrative innovation (TQM model), a multinational Case Company provides a versatile ground for a deep, longitudinal analysis. The Case Company started the adoption systematically in the mid 1980s in some of its units. As part of their strategic planning today, the procedure is in use throughout the entire global company. The empirical story begins from the innovation adoption decision that was made in the Case Company over 22 years ago. In order to be able to capture the right atmosphere and backgrounds leading to the adoption decision, key informants from that time were interviewed, since the main target was to clarify the dynamics of how an administrative innovation develops. In addition, archival material was collected and studied, available memos and data relating to the innovation, innovation adoption and later to the implementation contained altogether 20500 pages of documents. A survey was furthermore conducted at the end of 2006 focusing on questions related to the innovation, organization and leadership characteristics and the response rate totalled up to 54%. For measuring the effectiveness of the innovation implementation, the needed longitudinal objective performance data was collected. This data included the profit unit level experience of TQM, the development of the self assessment scores per profit unit and performance data per profit unit measured with profitability, productivity and customer satisfaction. The data covered the years 1995-2006. As a result, the prerequisites for the successful adoption of an administrative innovation were defined, such as the top management involvement, support of the change agents and effective tools for implementation and measurement. The factors with the greatest effect on the depth of the implementation were the timing of the adoption and formalization. The results also indicated that the TQM model does have an effect on the company performance measured with profitability, productivity and customer satisfaction. Consequently this thesis contributes to the present literature (i) by taking into its scope an administrative innovation and focusing on the whole innovation implementation process, from the adoption, through diffusion until its consequences, (ii) because the studied factors with an effect on the innovation adoption and diffusion are multifaceted and grouped into individual, organizational and environmental factors, and a strong emphasis is put on the role of the individual change agents and (iii) by measuring the depth and consistency of the administrative innovation. This deep analysis was possible due to the availability of longitudinal data with triangulation possibilities.

Image quality in CT: From physical measurements to model observers.

Evaluation of image quality (IQ) in Computed Tomography (CT) is important to ensure that diagnostic questions are correctly answered, whilst keeping radiation dose to the patient as low as is reasonably possible. The assessment of individual aspects of IQ is already a key component of routine quality control of medical x-ray devices. These values together with standard dose indicators can be used to give rise to 'figures of merit' (FOM) to characterise the dose efficiency of the CT scanners operating in certain modes. The demand for clinically relevant IQ characterisation has naturally increased with the development of CT technology (detectors efficiency, image reconstruction and processing), resulting in the adaptation and evolution of assessment methods. The purpose of this review is to present the spectrum of various methods that have been used to characterise image quality in CT: from objective measurements of physical parameters to clinically task-based approaches (i.e. model observer (MO) approach) including pure human observer approach. When combined together with a dose indicator, a generalised dose efficiency index can be explored in a framework of system and patient dose optimisation. We will focus on the IQ methodologies that are required for dealing with standard reconstruction, but also for iterative reconstruction algorithms. With this concept the previously used FOM will be presented with a proposal to update them in order to make them relevant and up to date with technological progress. The MO that objectively assesses IQ for clinically relevant tasks represents the most promising method in terms of radiologist sensitivity performance and therefore of most relevance in the clinical environment.

The new final Clinical Skills examination in human medicine in Switzerland: Essential steps of exam development, implementation and evaluation, and central insights from the perspective of the national Working Group.

OBJECTIVE: Since 2011, the new national final examination in human medicine has been implemented in Switzerland, with a structured clinical-practical part in the OSCE format. From the perspective of the national Working Group, the current article describes the essential steps in the development, implementation and evaluation of the Federal Licensing Examination Clinical Skills (FLE CS) as well as the applied quality assurance measures. Finally, central insights gained from the last years are presented. METHODS: Based on the principles of action research, the FLE CS is in a constant state of further development. On the foundation of systematically documented experiences from previous years, in the Working Group, unresolved questions are discussed and resulting solution approaches are substantiated (planning), implemented in the examination (implementation) and subsequently evaluated (reflection). The presented results are the product of this iterative procedure. RESULTS: The FLE CS is created by experts from all faculties and subject areas in a multistage process. The examination is administered in German and French on a decentralised basis and consists of twelve interdisciplinary stations per candidate. As important quality assurance measures, the national Review Board (content validation) and the meetings of the standardised patient trainers (standardisation) have proven worthwhile. The statistical analyses show good measurement reliability and support the construct validity of the examination. Among the central insights of the past years, it has been established that the consistent implementation of the principles of action research contributes to the successful further development of the examination. CONCLUSION: The centrally coordinated, collaborative-iterative process, incorporating experts from all faculties, makes a fundamental contribution to the quality of the FLE CS. The processes and insights presented here can be useful for others planning a similar undertaking.

Com explicar un sistema CLIL: un model dinàmic newtonià

En la implementació del CLIL a l’educació superior, apart d’estudis sobre el nivell de l’estudiantat i la disponibilitat del professorat, i de l’elaboració de material educatiu interdisciplinari, el repte actual és aconseguir que s’involucrin activament en CLIL els professors de contingut d’un ventall ampli de disciplines. En aquesta comunicació es presenten les bases d’un model per un sistema CLIL, utilitzant la dinàmica newtoniana. Pot ser un model interessant i plausible en un context universitari científic i tecnològic, on fins ara el CLIL s’ha implementat només lleugerament.

A Practical Micro Mechanical Model Based Local Approach Methodology for the Analysis of Ductile Fracture of Welded T-Joints

This thesis concentrates on developing a practical local approach methodology based on micro mechanical models for the analysis of ductile fracture of welded joints. Two major problems involved in the local approach, namely the dilational constitutive relation reflecting the softening behaviour of material, and the failure criterion associated with the constitutive equation, have been studied in detail. Firstly, considerable efforts were made on the numerical integration and computer implementation for the non trivial dilational Gurson Tvergaard model. Considering the weaknesses of the widely used Euler forward integration algorithms, a family of generalized mid point algorithms is proposed for the Gurson Tvergaard model. Correspondingly, based on the decomposition of stresses into hydrostatic and deviatoric parts, an explicit seven parameter expression for the consistent tangent moduli of the algorithms is presented. This explicit formula avoids any matrix inversion during numerical iteration and thus greatly facilitates the computer implementation of the algorithms and increase the efficiency of the code. The accuracy of the proposed algorithms and other conventional algorithms has been assessed in a systematic manner in order to highlight the best algorithm for this study. The accurate and efficient performance of present finite element implementation of the proposed algorithms has been demonstrated by various numerical examples. It has been found that the true mid point algorithm (a = 0.5) is the most accurate one when the deviatoric strain increment is radial to the yield surface and it is very important to use the consistent tangent moduli in the Newton iteration procedure. Secondly, an assessment of the consistency of current local failure criteria for ductile fracture, the critical void growth criterion, the constant critical void volume fraction criterion and Thomason's plastic limit load failure criterion, has been made. Significant differences in the predictions of ductility by the three criteria were found. By assuming the void grows spherically and using the void volume fraction from the Gurson Tvergaard model to calculate the current void matrix geometry, Thomason's failure criterion has been modified and a new failure criterion for the Gurson Tvergaard model is presented. Comparison with Koplik and Needleman's finite element results shows that the new failure criterion is fairly accurate indeed. A novel feature of the new failure criterion is that a mechanism for void coalescence is incorporated into the constitutive model. Hence the material failure is a natural result of the development of macroscopic plastic flow and the microscopic internal necking mechanism. By the new failure criterion, the critical void volume fraction is not a material constant and the initial void volume fraction and/or void nucleation parameters essentially control the material failure. This feature is very desirable and makes the numerical calibration of void nucleation parameters(s) possible and physically sound. Thirdly, a local approach methodology based on the above two major contributions has been built up in ABAQUS via the user material subroutine UMAT and applied to welded T joints. By using the void nucleation parameters calibrated from simple smooth and notched specimens, it was found that the fracture behaviour of the welded T joints can be well predicted using present methodology. This application has shown how the damage parameters of both base material and heat affected zone (HAZ) material can be obtained in a step by step manner and how useful and capable the local approach methodology is in the analysis of fracture behaviour and crack development as well as structural integrity assessment of practical problems where non homogeneous materials are involved. Finally, a procedure for the possible engineering application of the present methodology is suggested and discussed.

Design and implementation of a leisure program to improve function and wellbeing in people with depressive disorder

Depression is a major cause of disability and disease with significant costs to the health system and for the whole society. Regarding the treatment, in recent years has questioned the effectiveness of antidepressant drugs, with a recognition that although depressive disorders tend to improve with these treatments, residual symptoms seems to be still the norm, which is associated with the risk of new episodes or relapses, and faster its appearance. Otherwise many of the specialized clinical guidelines, propose a based on stepped-care model intervention, prioritizing less intrusive actions, including low-intensity psychosocial-interventions.

A cross-border VMI to Russia and cultural impacts to the implementation

VMI (Vendor managed inventory) is a collaboration model between a supplier and a customer, where a supplier has the responsibility of the inventory replenishments. The tightened competition forces companies to collaborate, and VMI is a simple method to cooperate. The aim of this study was to create a cross-border VMI model from Finland to Russia in the case company. However, the cultural differences between the countries produce problems and therefore the cultural impacts to the model and implementation were taken into account. This study includes two parts: the first framework consists of operational principles, benefits, risks, criteria and success factors of VMI and the second concentrates on cultural aspects of the process change. As a result, an operating model for case company’s supply chain was created. In addition, the suggestions for avoiding the cultural impacts in the implementation were given.

Agile CRM System Implementation Project

The application of information technology (IT) in customer relationship management (CRM) is growing rapidly as many companies implement CRM systems to support their numerous customer facing activities. However, failure rates of CRM projects remain notably high as they deliver scant solutions and poor user acceptance. As a consequence, it is justified to study previously researched CRM success factors and apply them to CRM system implementation. The aim of this master’s thesis was to get acquainted with relevant academic theories, frameworks and practices concerning CRM and agile development, and use them to generate a modified CRM project strategy to support the successful execution of the case company’s, Process Vision Oy, CRM implementation project. The empirical CRM system implementation project was conducted simultaneously with writing this thesis. Its theoretical findings could be transferred into practice through active participation in the CRM system development and deployment work. The project’s main goal was to produce and take into use a functioning CRM system. The goal was met, since at the time of printing this thesis the first system release was successfully published to its users at Process Vision’s marketing and sales departments. The key success elements in the CRM project were cyclic, iterative system development, customer oriented approach, user inclusion and flexible project management. Implying agile development practices ensured being able to quickly respond to changes arising during the progress of the CRM project. Throughout modelling of the core sales process formed a strong basis, on which the CRM system’s operational and analytical functionalities were built. End users were included in the initial specification of system requirements and they provided feedback on the system’s usage. To conclude, the chosen theoretical CRM roadmaps and agile development practices proved as beneficial in the successful planning and execution of the agile CRM system implementation project at Process Vision.

Design and implementation of a multipurpose reactor for scale-up studies

In the theoretical part, the different polymerisation catalysts are introduced and the phenomena related to mixing in the stirred tank reactor are presented. Also the advantages and challenges related to scale-up are discussed. The aim of the applied part was to design and implement an intermediate-sized reactor useful for scale-up studies. The reactor setting was tested making one batch of Ziegler–Natta polypropylene catalyst. The catalyst preparation with a designed equipment setting succeeded and the catalyst was analysed. The analyses of the catalyst were done, because the properties of the catalyst were compared to the normal properties of Ziegler–Natta polypropylene catalyst. The total titanium content of the catalyst was slightly higher than in normal Ziegler–Natta polypropylene catalyst, but the magnesium and aluminium content of the catalyst were in the normal level. By adjusting the siphonation tube and adding one washing step the titanium content of the catalyst could be decreased. The particle size of the catalyst was small, but the activity was in a normal range. The size of the catalyst particles could be increased by decreasing the stirring speed. During the test run, it was noticed that some improvements for the designed equipment setting could be done. For example more valves for the chemical feed line need to be added to ensure inert conditions during the catalyst preparation. Also nitrogen for the reactor needs to separate from other nitrogen line. With this change the pressure in the reactor can be kept as desired during the catalyst preparation. The proposals for improvements are presented in the applied part. After these improvements are done, the equipment setting is ready for start-up. The computational fluid dynamics model for the designed reactor was provided by cooperation with Lappeenranta University of Technology. The experiments showed that for adequate mixing with one impeller, stirring speed of 600 rpm is needed. The computational fluid dynamics model with two impellers showed that there was no difference in the mixing efficiency if the upper impeller were pumping downwards or upwards.

The determination of EONIA rate: The impact of the financial crisis and the effects of the changes in the monetary policy implementation framework

EONIA is a market based overnight interest rate, whose role as the starting point of the yield curve makes it critical from the perspective of the implementation of European Central Bank´s common monetary policy in the euro area. The financial crisis that started in 2007 had a large impact on the determination mechanism of this interest rate, which is considered as the central bank´s operational target. This thesis examines the monetary policy implementation framework of the European Central Bank and changes made to it. Furthermore, we discuss the development of the recent turmoil in the money market. EONIA rate is modelled by means of a regression equation using variables related to liquidity conditions, refinancing need, auction results and calendar effects. Conditional volatility is captured by an EGARCH model, and autocorrelation is taken into account by employing an autoregressive structure. The results highlight how the tensions in the initial stage of the market turmoil were successfully countered by ECB´s liquidity policy. The subsequent response of EONIA to liquidity conditions under the full allotment liquidity provision procedure adopted after the demise of Lehman Brothers is also established. A clear distinction in the behavior of the interest rate between the sub-periods was evident. In the light of the results obtained, some of the challenges posed by the exit-strategy implementation will be addressed.

Developing co-operation of business units – exploring synergies and a joint business model

The purpose of this study was to develop co-operation between business units of the company operating in graphic industry. The development was done by searching synergy opportunities between these business units. The final aim was to form a business model, which is based on co-operation of these business units.The literature review of this thesis examines synergies and especially the process concerning the search and implementation of synergies. Also the concept of business model and its components are examined. The research was done by using qualitative research method. The main data acquiring method to the empirical part was theme interviews. The data was analyzed using thematisation and content analysis.The results of the study include seven identified possible synergies and a business model, which is based on the co-operation of the business units. The synergy opportunities are evaluated and the implementation order of the synergies is suggested. The presented synergies create the base for the proposed business model.

Auger-type granular fertylizer distributor: matemathical model and dynamic simulation

The objective of this study was to model mathematically and to simulate the dynamic behavior of an auger-type fertilizer applicator (AFA) in order to use the variable-rate application (VRA) and reduce the coefficient of variation (CV) of the application, proposing an angular speed controller θ' for the motor drive shaft. The input model was θ' and the response was the fertilizer mass flow, due to the construction, density of fertilizer, fill factor and the end position of the auger. The model was used to simulate a control system in open loop, with an electric drive for AFA using an armature voltage (V A) controller. By introducing a sinusoidal excitation signal in V A with amplitude and delay phase optimized and varying θ' during an operation cycle, it is obtained a reduction of 29.8% in the CV (constant V A) to 11.4%. The development of the mathematical model was a first step towards the introduction of electric drive systems and closed loop control for the implementation of AFA with low CV in VRA.