Tailoring Magnetic, Mechanical and Dielectric Properties of Magnetorheological Elastomers based on Natural Rubber and Iron by Magnetic Field Assisted Curing for Possible Applications

If magnetism is universal in nature, magnetic materials are ubiquitous. A life without magnetism is unthinkable and a day without the influence of a magnetic material is unimaginable. They find innumerable applications in the form of many passive and active devices namely, compass, electric motor, generator, microphone, loud speaker, maglev train, magnetic resonance imaging, data recording and reading, hadron collider etc. The list is endless. Such is the influence of magnetism and magnetic materials in ones day to day life. With the advent of nanoscience and nanotechnology, along with the emergence of new areas/fields such as spintronics, multiferroics and magnetic refrigeration, the importance of magnetism is ever increasing and attracting the attention of researchers worldwide. The search for a fluid which exhibits magnetism has been on for quite some time. However nature has not bestowed us with a magnetic fluid and hence it has been the dream of many researchers to synthesize a magnetic fluid which is thought to revolutionize many applications based on magnetism. The discovery of a magnetic fluid by Jacob Rabinow in the year 1952 paved the way for a new branch of Physics/Engineering which later became magnetic fluids. This gave birth to a new class of material called magnetorheological materials. Magnetorheological materials are considered superior to electrorheological materials in that magnetorheology is a contactless operation and often inexpensive.Most of the studies in the past on magnetorheological materials were based on magnetic fluids. Recently the focus has been on the solid state analogue of magnetic fluids which are called Magnetorheological Elastomers (MREs). The very word magnetorheological elastomer implies that the rheological properties of these materials can be altered by the influence of an external applied magnetic field and this process is reversible. If the application of an external magnetic field modifies the viscosity of a magnetic fluid, the effect of external magnetic stimuli on a magnetorheological elastomer is in the modification of its stiffness. They are reversible too. Magnetorheological materials exhibit variable stiffness and find applications in adaptive structures of aerospace, automotive civil and electrical engineering applications. The major advantage of MRE is that the particles are not able to settle with time and hence there is no need of a vessel to hold it. The possibility of hazardous waste leakage is no more with a solid MRE. Moreover, the particles in a solid MRE will not affect the performance and durability of the equipment. Usually MR solids work only in the pre yield region while MR fluids, typically work in the post yield state. The application of an external magnetic field modifies the stiffness constant, shear modulus and loss modulus which are complex quantities. In viscoelastic materials a part of the input energy is stored and released during each cycle and a part is dissipated as heat. The storage modulus G′ represents the capacity of the material to store energy of deformation, which contribute to material stiffness. The loss modulusG′′ represents the ability of the material to dissipate the energy of deformation. Such materials can find applications in the form of adaptive vibration absorbers (ATVAs), stiffness tunable mounts and variable impedance surfaces. MREs are an important material for automobile giants and became the focus of this research for eventual automatic vibration control, sound isolation, brakes, clutches and suspension systems

Soil-less systems vs. soil-based systems for cultivating edible plants on buildings in relation to the contribution towards sustainable cities

Food production and consumption for cities has become a global concern due to increasing numbers of people living in urban areas, threatening food security. There is the contention that people living in cities have become disconnected with food production, leading to reduced nutrition in diets and increased food waste. Integrating food production into cities (urban agriculture) can help alleviate some of these issues. Lack of space at ground level in high-density urban areas has accelerated the idea of using spare building surfaces for food production. There are various growing methods being used for food production on buildings, which can be split into two main types, soil-less systems and soil-based systems. This paper is a holistic assessment (underpinned by the triple bottom line of sustainable development) of these two types of systems for food production on buildings, looking at the benefits and limitation of each type in this context. The results illustrate that soil-less systems are more productive per square metre, which increases the amount of locally grown, fresh produce available in urban areas. The results also show that soil-based systems for cultivation on buildings are more environmentally and socially beneficial overall for urban areas than soil-less systems.

Social capital and educational achievements: Coleman vs. Bourdieu

The influence of social capital on an individual’s educational achievements is the subject of numerous scientific papers. Research on social capital is most frequently based on Coleman’s (1988) or Bourdieu’s (1986) theories of capital, which are related to different paradigms of social theory: whereas Coleman’s approach has its roots in structural functionalism, Bourdieu’s approach contains elements of conflict theory. A number of authors, starting with Bourdieu, attempt to explain and prove that, when connected with the education of individuals, the activity of social capital facilitates social reproduction. Other authors support the notion that social capital is, in fact, a powerful weapon that encourages social mobility. A third group of researchers emphasise that neither of these approaches in isolation can entirety explain the influences of social capital on an individual’s education (Ho, 2003). The present paper offers a review of research focusing on the influences of social capital on educational achievements, while outlining the fundamental differences between the two theoretical approaches that are most frequently used for research of this topic. The aim of the paper is to explain the influence of social capital on an individual’s educational achievements under Bourdieu’s and Coleman’s theoretical concepts, and to establish whether combining the approaches is possible. The conclusion and arguments show that it is legitimate to use all three theoretical approaches. (DIPF/Orig.)

The effects of applying feedback as part of performance based assessment on students‘speaking skills in a conversation class at ase

Tesis (Licenciado en Lenguas Castellana, Inglés y Francés).--Universidad de La Salle. Facultad de Ciencias de La Educación. Licenciatura en Lengua Castellana, Inglés y Francés, 2014

Improving CEGEP Students’ ESL Accuracy through L1/L2 Synchronous Text-based Screen-Sharing Tasks

Abstract : CEGEPs are now reaping the ‘first fruits’ of the last Educational Reform in Quebec and as a result, ‘English as Second Language’ (ESL) teachers are noticing an improvement in fluency and a seemingly lower level of inhibition when it comes to production skills. However, this output is accompanied by a noticeable lack of accuracy. Keeping in mind that the purpose of language is communication, we need to find a way to reduce the number of basic common errors made by CEGEP ESL students, while maintaining a natural and motivating learning environment. Thanks to recent advances in computer-mediated communication (CMC), we now have the necessary tools to access peer native speakers throughout the world. Although this technology can be used for other language courses, this study explored the potential value of collaboration with native English speakers through the use of synchronous screen-sharing technology, in order to improve CEGEP ESL students’ accuracy in writing. The instrumentation used consisted of a questionnaire, tests, plus documents of collaborative tasks, using the ‘Google for Education’ screen-sharing tool. Fourteen Intermediate/Advanced ESL CEGEP students participated in this study. Despite the positive tendencies revealed, only a prolonged use of the innovative method yielded a significant positive impact. Moreover, a mixed linear regression for the group with more L1 intervention revealed a significant correlation between the number of errors in the task documents and the number of tasks accomplished. Thus, it could be inferred that ESL accuracy improves in proportion to the number of synchronous text-based screen-sharing tasks done with L1 collaboration.

O Impacto de um Programa de Estimulação Cognitiva em Pessoas Idosas a Residir na Comunidade vs. Institucionalizadas

This study aims to examine the benefits of a cognitive stimulation program in reducing social isolation and irritability and improving cognitive capacity and emotional status of elderly people. A program of 14 sessions was conducted with individuals living in the community (n=6) and with group of individuals living in nursing home (n=6). Both groups were evaluated before and after the intervention with the Multidimensional Observation Scale for Elderly Subjects (MOSES). Also a focus group with the program monitors ́ allowed to collect information about the experience in conducting the sessions and their opinion about the whole program. Results have demonstrated benefits statistically significant in the domains of relationships and emotional status for the group who received the intervention at home. This experience allowed to conclude that the implementation of cognitive stimulation programs should be extended to home-based services, especially for older persons living alone.

Factors Associated With The Age Of The Onset Of Diabetes In Women Aged 50 years Or More: A Population-based Study.

Investigate factors associated with the onset of diabetes in women aged more than 49 years. Cross-sectional, population-based study using self-reports with 622 women. The dependent variable was the age of occurrence of diabetes using the life table method. Cox multiple regression models were adjusted to analyse the onset of diabetes according to predictor variables. Sociodemographic, clinical and behavioural factors were evaluated. Of the 622 women interviewed, 22.7% had diabetes. The mean age at onset was 56 years. The factors associated with the age of occurrence of diabetes were self-rated health (very good, good) (coefficient=-0.792; SE of the coefficient=0.215; p=0.0001), more than two individuals living in the household (coefficient=0.656, SE of the coefficient=0.223; p=0.003), and body mass index (BMI) (kg/m(2)) at 20-30 years of age (coefficient= 0.056, SE of the coefficient=0.023; p=0.014). Self-rated health considered good or very good was associated with a higher rate of survival without diabetes. Sharing a home with two or more other people and a weight increase at 20-30 years of age was associated with the onset of type 2 diabetes.

Comparison Of Techniques For The Isolation Of Volatiles From Cashew Apple Juice.

The aim of this study was to compare the performance of the following techniques on the isolation of volatiles of importance for the aroma/flavor of fresh cashew apple juice: dynamic headspace analysis using PorapakQ(®) as trap, solvent extraction with and without further concentration of the isolate, and solid-phase microextraction (fiber DVB/CAR/PDMS). A total of 181 compounds were identified, from which 44 were esters, 20 terpenes, 19 alcohols, 17 hydrocarbons, 15 ketones, 14 aldehydes, among others. Sensory evaluation of the gas chromatography effluents revealed esters (n = 24) and terpenes (n = 10) as the most important aroma compounds. The four techniques were efficient in isolating esters, a chemical class of high impact in the cashew aroma/flavor. However, the dynamic headspace methodology produced an isolate in which the analytes were in greater concentration, which facilitates their identification (gas chromatography-mass spectrometry) and sensory evaluation in the chromatographic effluents. Solvent extraction (dichloromethane) without further concentration of the isolate was the most efficient methodology for the isolation of terpenes. Because these two techniques also isolated in greater concentration the volatiles from other chemical classes important to the cashew aroma, such as aldehydes and alcohols, they were considered the most advantageous for the study of cashew aroma/flavor.

Class II malocclusion occlusal severity description

OBJECTIVES: It is well known that the efficacy and the efficiency of a Class II malocclusion treatment are aspects closely related to the severity of the dental anteroposterior discrepancy. Even though, sample selection based on cephalometric variables without considering the severity of the occlusal anteroposterior discrepancy is still common in current papers. In some of them, when occlusal parameters are chosen, the severity is often neglected. The purpose of this study is to verify the importance given to the classification of Class II malocclusion, based on the criteria used for sample selection in a great number of papers published in the orthodontic journal with the highest impact factor. MATERIAL AND METHODS: A search was performed in PubMed database for full-text research papers referencing Class II malocclusion in the history of the American Journal of Orthodontics and Dentofacial Orthopedics (AJO-DO). RESULTS: A total of 359 papers were retrieved, among which only 72 (20.06%) papers described the occlusal severity of the Class II malocclusion sample. In the other 287 (79.94%) papers that did not specify the anteroposterior discrepancy severity, description was considered to be crucial in 159 (55.40%) of them. CONCLUSIONS: Omission in describing the occlusal severity demands a cautious interpretation of 44.29% of the papers retrieved in this study.

Bond strength of a pit-and-fissure sealant associated to etch-and-rinse and self-etching adhesive systems to saliva-contaminated enamel: individual vs. simultaneous light curing

This study evaluated in vitro the shear bond strength (SBS) of a resin-based pit-and-fissure sealant [Fluroshield (F), Dentsply/Caulk] associated with either an etch-and-rinse [Adper Single Bond 2 (SB), 3M/ESPE] or a self-etching adhesive system [Clearfil S3 Bond (S3), Kuraray Co., Ltd.] to saliva-contaminated enamel, comparing two curing protocols: individual light curing of the adhesive system and the sealant or simultaneous curing of both materials. Mesial and distal enamel surfaces from 45 sound third molars were randomly assigned to 6 groups (n=15), according to the bonding technique: I - F was applied to 37% phosphoric acid etched enamel. The other groups were contaminated with fresh human saliva (0.01 mL; 10 s) after acid etching: II - SB and F were light cured separately; III - SB and F were light cured together; IV - S3 and F were light cured separately; V - S3 and F were light cured simultaneously; VI - F was applied to saliva-contaminated, acid-etched enamel without an intermediate bonding agent layer. SBS was tested to failure in a universal testing machine at 0.5 mm/min. Data were analyzed by one-way ANOVA and Fisher's test (α=0.05).The debonded specimens were examined with a stereomicroscope to assess the failure modes. Three representative specimens from each group were observed under scanning electron microscopy for a qualitative analysis. Mean SBS in MPa were: I-12.28 (±4.29); II-8.57 (±3.19); III-7.97 (±2.16); IV-12.56 (±3.11); V-11.45 (±3.77); and VI-7.47 (±1.99). In conclusion, individual or simultaneous curing of the intermediate bonding agent layer and the resin sealant did not seem to affect bond strength to saliva-contaminated enamel. S3/F presented significantly higher SBS than the that of the groups treated with SB etch-and-rinse adhesive system and similar SBS to that of the control group, in which the sealant was applied under ideal dry, noncontaminated conditions.

Evaluation of post-surgical healing in rats using a topical preparation based on extract of Musa sapientum L., Musaceae, epicarp

Considering that oral preparations made with peel green bananas (e.g. flour and extracts) demonstrated healing effects on mucous membranes and skin, this study evaluated the healing and the antimicrobial property of a topical preparation based on extract of Musa sapientum L., Musaceae, (apple banana) in surgically induced wounds in the skin of male Wistar rats, 100 g. The extract was obtained by decoction, the presence of tannins was detected by phytochemical screening and 10% of the extract was incorporated into the carbopol gel (CMS gel). The processes of healing and bacterial isolation were evaluated in the following experimental groups: control (no treatment), treatment with placebo or with the CMS gel. The healing of surgical wounds treated with the CMS gel was faster when compared with the control and placebo groups and the treatment with CMS gel also inhibited the growth of pyogenic bacteria and enterobacteria in the wounds. The results indicate that the extract of Musa sapientum epicarp has healing and antimicrobial properties (in vivo), probably, due to tannins.

A new genus and two new species of Stevardiinae (Characiformes: Characidae) with a hypothesis on their relationships based on morphological and histological data

Lepidocharax, new genus, and Lepidocharax diamantina and L. burnsi new species from eastern Brazil are described herein. Lepidocharax is considered a monophyletic genus of the Stevardiinae and can be distinguished from the other members of this subfamily except Planaltina, Pseudocorynopoma, and Xenurobrycon by having the dorsal-fin origin vertically aligned with the anal-fin origin, vs. dorsal fin origin anterior or posterior to anal-fin origin. Additionally the new genus can be distinguished from those three genera by not having the scales extending over the ventral caudal-fin lobe modified to form the dorsal border of the pheromone pouch organ or to represent a pouch scale in sexually mature males. In this paper, we describe these two recently discovered species and the ultrastructure of their spermatozoa.

Spectral Region Optimization for Raman-Based Optical Biopsy of Inflammatory Lesions

Objective: The biochemical alterations between inflammatory fibrous hyperplasia (IFH) and normal tissues of buccal mucosa were probed by using the FT-Raman spectroscopy technique. The aim was to find the minimal set of Raman bands that would furnish the best discrimination. Background: Raman-based optical biopsy is a widely recognized potential technique for noninvasive real-time diagnosis. However, few studies had been devoted to the discrimination of very common subtle or early pathologic states as inflammatory processes that are always present on, for example, cancer lesion borders. Methods: Seventy spectra of IFH from 14 patients were compared with 30 spectra of normal tissues from six patients. The statistical analysis was performed with principal components analysis and soft independent modeling class analogy cross-validated, leave-one-out methods. Results: Bands close to 574, 1,100, 1,250 to 1,350, and 1,500 cm(-1) (mainly amino acids and collagen bands) showed the main intragroup variations that are due to the acanthosis process in the IFH epithelium. The 1,200 (C-C aromatic/DNA), 1,350 (CH(2) bending/collagen 1), and 1,730 cm(-1) (collagen III) regions presented the main intergroup variations. This finding was interpreted as originating in an extracellular matrix-degeneration process occurring in the inflammatory tissues. The statistical analysis results indicated that the best discrimination capability (sensitivity of 95% and specificity of 100%) was found by using the 530-580 cm(-1) spectral region. Conclusions: The existence of this narrow spectral window enabling normal and inflammatory diagnosis also had useful implications for an in vivo dispersive Raman setup for clinical applications.

Transforming Youth Identities: Interactions Across ""Races/Colors/Ethnicities,"" Gender, Class, and Sexualities in Johannesburg, South Africa

In South Africa, and especially in Johannesburg, apartheid's ""racial"" paradigms are being transformed. Fifteen years after the end of apartheid and the elimination of all forms of inequity based on notion of ""race,"" including the abolition of the Immorality Act of 1949 that prohibited mixed marriages, the discourses of youth challenge preestablished boundaries. Today, the South African Constitution gives people the right to proclaim their sexual orientation and to shape their own identities. Through ethnographic observations carried out in Johannesburg and in-depth interviews with young people, this paper explores transforming notions of identity based on ""race/color/ethnicity,"" gender, class, and sexuality. The dynamics and challenges faced by young people with regards to mixed interactions in post-apartheid Johannesburg are analyzed and the paper looks at how "" race,"" gender, and sexuality interact in the various spaces in Johannesburg and how they affect young people's lives, particularly their perceptions of risk, violence, and HIV/AIDS vulnerability.

A calibration approach based on Takagi-Sugeno fuzzy inference system for digital electronic compasses

Recently, the development of industrial processes brought on the outbreak of technologically complex systems. This development generated the necessity of research relative to the mathematical techniques that have the capacity to deal with project complexities and validation. Fuzzy models have been receiving particular attention in the area of nonlinear systems identification and analysis due to it is capacity to approximate nonlinear behavior and deal with uncertainty. A fuzzy rule-based model suitable for the approximation of many systems and functions is the Takagi-Sugeno (TS) fuzzy model. IS fuzzy models are nonlinear systems described by a set of if then rules which gives local linear representations of an underlying system. Such models can approximate a wide class of nonlinear systems. In this paper a performance analysis of a system based on IS fuzzy inference system for the calibration of electronic compass devices is considered. The contribution of the evaluated IS fuzzy inference system is to reduce the error obtained in data acquisition from a digital electronic compass. For the reliable operation of the TS fuzzy inference system, adequate error measurements must be taken. The error noise must be filtered before the application of the IS fuzzy inference system. The proposed method demonstrated an effectiveness of 57% at reducing the total error based on considered tests. (C) 2011 Elsevier Ltd. All rights reserved.