Sopimusoikeus ja sopimuskäytäntö: miten nettisopimuksia tehdään ja voidaan tehdä

Johdanto Työssä käsitellään sopimusten tekemistä internetissä. Tavoitteena on löytää mahdollisia nettisopimusten sopimussunnittelussa huomioon otettavia asioita. Näkökulmaksi on otettu sopimuskäytäntö. Sopimuskäytäntö lähtökohtana tutkimukselle Työssä esitellään sopimuskäytännön ja perinteisen analyyttisen sopimusoikeuden välinen ristiriita. Koska yritykset eivät halua ratkaista ongelmiaan tuomioistuimessa, tuomioistuimiin päätyy vain marginaalinen osa sopimuksista. Yritysten näkökulmasta tuomioistuimiin päätyneet sopimukset ovat olleet epäonnistuneita. Tämän takia pelkästään tuomioistuinratkaisuja tutkimalla ei tavoiteta käytännön sopimustoiminnan ongelmia ja ei pystytä tarjoamaan niihin ratkaisumalleja. Sama ongelma koskee myös kuluttajasopimuksia. Tässä työssä on tutkittu käytännön sopimustoimintaa eli sopimuskäytäntöä. Sopimusoikeuden tutkimukseen on tuotu uutta näkökulmaa. Sopimuksen syntyminen nettikaupassa Kirjoittaja esittää yleisen sopimusmallin nettisopimuksille. Sopimusmallin keskeisiä näkökohtia ovat sopimuksen prosessiluonne. Sopimusmallissa käydään läpi kaikkia niitä vaiheita, jotka voivat vaikuttaa päätökseen sitoutua sopimukseen. Työssä myös esitetään, että sopimukseen sisältö määräytyy näiden vaiheiden mukaisesti. Koska pitkällä tähtäimellä tehdyssä sopimustoiminnassa syntyy ajoittain ongelmia, työssä myös käsitellään yrityksen mahdollisuuksia hallita näitä sopimushäiriöitä. Arviot kahdesta avoimesta sopimusjärjestelmästä Tutkielmassa myös käydään läpi kaksi yleisölle avointa nettisopimusjärjestelmää. Toinen on tavarakauppa Amazon.com ja toinen Genetic Anomalies, Inc.:in tekemä tietokonepeli ChronX. Kumpaankin yritetään soveltaa esiteltyä yleistä sopimusmallia. Loppupäätelmät Keskeiseksi johtopäätökseksi tutkielmassa tulee, että yrityksen tulee pyrkiä tarjoamaan asiakkailleen mahdollisimaan hyvin tietoa heidän sopimusjärjestelmästään ja tuotteistaan. Tällä ei tarkoiteta valtavaa määrää epäselkeästi esitettyä tietoa. Tiedon jakaminen ja asiakaspalautteen hallinta ovat tutkimuksen mukaan yritysten suurin haaste nettikaupassa. Tutkielmassa myös esitetään, että näitä tuloksia saattaa voida soveltaa tavanomaiseenkin kaupankäyntiin.

Improved damping capacity and machinability of graphite particle-aluminum alloy composites

The damping capacity of cast graphitic aluminum alloy composites has been measured using a torsion pendulum at a constant strain amplitude. It was found that flake-graphite particles dispersed in the matrix of aluminum alloys increased the damping capacity; the improvement was greater, the higher the amount of graphite dispersed in the matrix. At sufficiently high graphite contents the damping capacity of graphitic aluminum composites approaches that of cast iron. The ratio between the damping capacity and the density of graphitic aluminum alloys is higher than cast iron, making them very attractive as light-weight, high-damping materials for possible aircraft applications. Machinability tests on graphite particle-aluminum composites, conducted at speeds of 315 sfm and 525 sfm, showed that the chip length decreased with the amount of graphite of a given size. When the size of graphite was decreased, at a given machining speed, the chip length decreased. Metallographic examination shows that graphite particles act as chip breakers, and are frequently sheared parallel to the plane of the

Sankarihautaus vapaussodassa : valkoisten kaatuneiden hautaaminen Suomessa vuonna 1918

Civil War Hero Burials the funerals of the fallen White in Finland in 1918 This study focuses on the burial with honours of fallen White combatants during the Finnish Civil War of 1918, as well as on the reasons underpinning the practice. The main sources of the study included the archives of the White army, the Civil Guard organisation and the Church, as well as the newspapers. The genetic method of history research was used. Both the existing tradition of military burials and the ecclesiastical burial culture influenced the burials of those who fell during the Civil War. The first war hero funerals took place as early as the beginning of February 1918, and the first larger-scale collective funerals were organised in Laihia and Vaasa in the Ostrobothnia province, with the latter attended by the supreme civil and military leaders of White Finland. From early on, these funerals assumed their characteristic features, such as the lion flag a design for the Finnish national flag proposed immediately upon the declaration of the country s independence military parades, lines of honour guards, eulogies, salutes and common war hero graves. As a result of the general offensive begun in mid-March 1918, the numbers of the fallen multiplied, so special organisations were established to handle the burials of the fallen. At the same time, the war hero funerals became more frequent and diffused, and the numbers of the buried grew throughout the country. In early March, the advocates of the republican system of government published their appeal in the newspapers, requesting that collective graves for those who fell in the war prepared in every locality. They motivated their request by stating that it was the funerals in particular that had inspired many men to join the ranks voluntarily in the first place, and that the large collective soldiers graves increased the numbers of those who answered the call and left for the front. The Civil Guard organisation arranged the burials of war heroes. The clergy contributed by officiating the religious service and by clearly aligning themselves with the Whites in their eulogies. The teachings of the Lutheran Church suggest that they found the Whites to be the temporal authority instituted by God, and therefore authorised raising the sword against the Reds. Speaking at the funerals with great pomp and sentimental power, the leaders of the Civil Guard and the exponents of the learned classes instigated their audiences against the Reds. The funeral speeches idealised the war hero s death by recalling military history since the times of ancient Greece. Being of the emblematic colour of the Whites, the white coffin assumed a particular importance connected to ideas of biblical purity and innocence. By the end of May 1918, almost 3,300 Whites were buried in the soldiers graves prepared by the burial organisation in some 400 localities. Only about 200 men remained missing in action or unidentified. The largest common graves accommodated over 60 fallen combatants. Thus, the traditions of the 1918 Civil War directly influenced war hero burial practices, which continued into the Finnish Winter War of 1939.

Production of cast aluminium-graphite particle composites using a pellet method

Copper- and nickel-coated graphite particles can be successfully introduced into aluminium-base alloy melts as pellets to produce cast aluminium-graphite particle composites. The pellets were made by pressing mixtures of nickel- or copper-coated graphite particles and aluminium powders together at pressures varying between 2 and 20 kg mm–2. These pellets were dispersed in aluminium alloy melts by plunging and holding them in the melts using a refractory coated mild steel cone, until the pellets disintegrated and the powders were dispersed. The optimum pressure for the preparation of pellets was 2 to 5 kg mm–2 and the optimum size and percentage of aluminium powder were 400 to 1000mgrm and 35 wt% respectively. Under optimum conditions the recovery of the graphite particles in the castings was as high as 96%, these particles being pushed into the last freezing interdendritic regions. The tensile strength and the hardness of the graphite aluminium alloys made using the pellet method are comparable to those of similar composites made using gas injection or the vortex method. The pellet method however has the advantage of greater reproducibility and flexibility. Dispersion of graphite particles in the matrix of cast aluminium alloys using the pellet method increases their resistance to wear.

Taloudellinen menestys etusijalla : Suomalaisten pörssiyritysten ympäristöasenteita

Tässä pro gradu -tutkielmassa selvitetään suomalaisten pörssiyritysten ympäristöasenteita. Asenteella tarkoitetaan suhteellisen pysyvää arviota tai toimintavalmiutta suhteessa ympäristöön. Lähtökohtaoletuksena on, että yrityksen perustehtävä on voiton tuottaminen osakkeenomistajille ja erilaisten sidosryhmien hyödyttäminen. Lähdeaineistona ovat yritysten yhteiskuntavastuu- ja ympäristöraportit, jotka on valittu OMX:n pohjoismaisen pörssin listalta niiden yritysten joukosta, joiden kotipaikka on Suomessa, jotka edustavat energian, perusteollisuuden ja yhdyskuntapalveluiden toimialaryhmää, ja jotka ovat julkaisseet erillisen ympäristö- tai yhteiskuntavastuuraportin. Tällaisia yrityksiä ovat Neste Oil, Fortum, Kemira, Outokumpu, Rautaruukki, M-real, Stora Enso ja UPM. Tutkimusmetodina on systemaattinen analyysi, jolla tarkoitetaan käsitteiden ja argumentaation analyysiä sekä johtopäätösten tekemistä analyysin pohjalta. Tutkimuskysymyksiä on kolme: Minkälaisia ympäristöasenteita lähteinä olevat suomalaisten pörssiyritysten ympäristö- ja yhteiskuntavastuuraportit sisältävät? Mitkä tekijät vaikuttavat tutkimuskohteena olevien yritysten ympäristöasenteisiin lähteiden perusteella? Millaisia toimintavalmiuksia yritysten ympäristöasenteet sisältävät lähteiden perusteella? Tutkielma jakaantuu johdannon, taustaluvun ja loppukatsauksen lisäksi kolmeen päälukuun. Taustaluvussa esitellään ihmis-, tekniikka- ja luontokeskeinen ympäristöasenne. Tämä kolmijako ja näiden eri asenteiden piirteet muodostavat haravan lähteiden analysoinnille sen selvittämiseksi, millainen asenne tutkimuksen kohteeksi valituilla yrityksillä on ympäristöön. Ensimmäisessä pääluvussa tarkastellaan kestävää kehitystä ja sen periaatteiden noudattamista, luonnonvarojen käyttöä raaka-aineena sekä toiminnalle asetettuja tavoitteita ja asiakkaiden toiveisiin vastaamista. Yritykset pyrkivät suojelemaan luontoa tuleville sukupolville, kehittämään ympäristömyötäisempiä tuotteita, käyttämään luonnonvaroja kestävästi ja hallitsemaan päästöjen ja jätteiden syntymistä teknisillä ratkaisuilla ja kierrätyksellä. Toisessa pääluvussa tarkastellaan taloudellisen menestyksen ja ympäristön hallinnan vaikutusta yritysten ympäristöasenteisiin. Asenteisiin vaikuttavat taloudellisen menestyksen saavuttaminen, hiilidioksidipäästöjen vähentäminen, ympäristöpoliittiset ohjauskeinot ja ympäristöasioiden hallinta. Kolmannessa pääluvussa tarkastellaan yritystoiminnan ympäristövaikutuksia, niiden taustalla olevia asenteita sekä millaisia toimintavalmiuksia asenteet sisältävät. Tällaisia toimintavalmiuksia ovat yritysten osallistuminen ympäristönsuojeluun, yrityksen ympäristövaikutukset sekä yhteistyö ympäristöjärjestöjen kanssa ja ympäristöntutkimus. Yritysten asenne ympäristöön on pääsääntöisesti ihmis- ja tekniikkakeskeinen. Luontokeskeinen asenne ympäristöön tulee raporteissa esille vain harvoin, esimerkiksi kuvattaessa ympäristövaikutuksia ekosysteemin ja luonnon monimuotoisuuden kannalta. Yritysten asenne ympäristöön painottuu tällöinkin ihmis- ja tekniikkakeskeiseksi, sillä ympäristönsuojelun motiivina voi olla vain ympäristöpoliittisiin vaatimuksiin vastaaminen tai yrityskuvan parantaminen.

Wrought aluminum-nickel alloys for high strength-high conductivity applications

Aluminum-Nickel alloys ranging from 0.06 pct to 6.1 pct (by wt) Ni have been developed for high strength-high conductivity applications. These alloys were produced by solidification in a permanent mold followed by homogenization, hot extrusion or hot rolling and cold drawing to wire form. This sequence of fabrication a) led to the production of fine fibrous dispersoids of NiAl3 as part of the Al-NiAl3 eutectic during the initial casting operation, b) permitted the retention of fine fibrous dispersiods of NiAl3 produced during casting without any significant coarsening during processing and c) led to uniform dispersion and general alignment of these fibrous dispersoids along a given direction in the product without any measurable fiber-matrix separation, extensive fiber-fragmentation or crack production in the matrix. These alloys can be processed to wire form as easily as aluminum and when processed by the above sequence, possess very attractive combination of high strength-high electrical conductivity. Tensile strengths range from 173 N/mm2 (at 0.6 pct Ni) to 241 N/mm2 (at 6.1 pct Ni) in combination with corresponding conductivity values between 62 pct IACS and 55.5 pct IACS. The wires also possess attractive yield strength; for instance, the 0.2 pct off-set strength of Al-6.1 pct Ni wire is 213 N/mm2. Using simple composite rules, the estimated strength and the conductivity of NiAl3 fibers were found to be 1380 N/mm2 and 18 pct IACS respectively, in these wires.

Technological-forecasting and research inputs in area of birth-control technology

Technological forecasting, defined as quantified probabilistic prediction of timings and degree of change in the technological parameters, capabilities desirability or needs at different times in the future, is applied to birth control technology (BCT) as a means of revealing the paths of most promising research through identifying the necessary points for breakthroughs. The present status of BCT in the areas of pills and the IUD, male contraceptives, immumological approaches, post-coital pills, abortion, sterilization, luteolytic agents, laser technologies, and control of the sex of the child, are each summarized and evaluated in turn. Fine mapping is done to identify the most potentially promising areas of BCT. These include efforts to make oral contraception easier, improvement of the design of the IUD, clinical evaluation of the male contraceptive danazol, the effecting of biochemical changes in the seminal fluid, and researching of immunological approaches and the effects of other new drugs such as prostaglandins. The areas that require immediate and large research inputs are oral contraception and the IUD. On the basis of population and technological forecasts, it is deduced that research efforts could most effectively aid countries like India through the immediate production of an oral contraceptive pill or IUD with long-lasting effects. Development of a pill for males or an immunization against pre gnancy would also have a significant impact. However, the major impediment to birth control programs to date is attitudes, which must be changed through education.

Essays on Illegal Activities, Institutions and Economic Growth

In public economics, two extremist views on the functions of a government compete: one emphasizes government working for the public interest to provide value for the citizens, while another regards government mainly as a workhorse for private interests. Moreover, as the sole legitimate authority, the government has the right to define the rules and laws as well as to enforce them. With respect to regulation, two extremes arise: from too little regulation to too much of it. If the government does not function or ceases to exist, the state falls into anarchy or chaos (Somalia). If it regulates too much, it will completely suffocate private activities, which might be considered extralegal (the former Soviet Union). In this thesis I scrutinize the government s interventionist policies and evaluate the question of how to best promote economic well-being. The first two essays assume that the government s policies promote illegal activity. The first paper evaluates the interaction between the government and the mafia, and pays attention to the law enforcement of underground production. We show that the revenue-maximizing government will always monitor the shadow economy, as monitoring contributes to the government s revenue. In general, both legal and illegal firms are hurt by the entry of the mafia. It is, however, plausible that legal firms might benefit by the entry of the mafia if it competes with the government. The second paper tackles the issue of the measurement of the size of the shadow economy. To formulate policies it is essential to know what drives illegal economic activity; is it the tax burden, excess regulation, corruption or a weak legal environment? In this paper we propose an additional explanation for tax evasion and shadow production, namely cultural factors as manifested by religion as determinants of tax morality. According to our findings, Catholic and Protestant countries do not differ in their tax morale. The third paper contributes to the literature discussing the role of the government in promoting economic and productivity growth. Our main result is that, given the complex relationship between economic growth and economic freedom, marketization has not necessarily been beneficial in terms of growth. The last paper builds on traditional growth literature and revisits the debate on convergence clubs arising from demographic transition. We provide new evidence against the idea that countries within a club would converge over time. Instead, we propose that since the demographic transition is a dynamic process, one can expect countries to enter the last regime of stable, modern growth in stages.

The Politics of Pulp Investment and the Brazilian Landless Movement (MST)

The Politics of Pulp Investment and the Brazilian Landless Movement (MST) The paper industry has been moving more heavily to the global South at the beginning of the 21st century. In a number of cases the rural populations of the global South have engaged in increasingly important resistance in their scuffle with the large-scale tree plantation-relying pulp investment model. The resistance had generally not yet managed to slow down Southern industrial tree plantation expansion until 2004. After all, even the MST, perhaps the strongest of the Southern movements, has limited power in comparison to the corporations pushing for plantation expansion. This thesis shows how, even against these odds, depending on the mechanisms of contention and case-specific conflict dynamics, in some cases the movements have managed to slow and even reverse plantation expansion. The thesis is based on extensive field research in the Brazilian countryside. It outlines a new theory of contentious agency promotion, emphasizing its importance in the shaping of corporate resource exploitation. The thesis includes a Qualitative Comparative Analysis of resistance influence on the economic outcomes of all (14) Brazilian large-scale pulp projects between 2004-2008. The central hypothesis of the thesis is that corporate resource exploitation can be slowed down more effectively and likely when the resistance is based on contentious agency. Contentious agency is created by the concatenation of five mutually supporting mechanisms of contention: organizing and politicizing a social movement; heterodox framing of pulp projects; protesting; networking; and embedding whilst maintaining autonomy. The findings suggest that contentious agency can slow or even reverse the expansion of industrial plantations, whereas when contentious agency promotion was inactive, fast or even unchecked plantation expansion was always the outcome. The rule applied to all the assessed 14 pulp conflict cases. The hypothesis gained strong support even in situations where corporate agency promotion was simultaneously active. In previous studies on social movements, there has been a lack of contributions that help us understand the causal mechanisms of contention influencing economic outcomes. The thesis answers to the call by merging a Polanyian analysis of the political economy with the Dynamics of Contention research program and making a case for the impact of contentious agency on capital accumulation. The research concludes that an efficient social movement can utilize mechanisms of contention to promote the potential of activism among its members and influence investment outcomes. Protesting, for example via pioneering land occupations, seemed to be particularly important. Until now, there has been no comprehensive theory on when and how contentious agency can slow down or reverse the expansion of corporate resource exploitation. The original contribution of this research is to provide such a theory, and utilize it to offer an extensive explanation on the conflicts over pulp investment in Brazil, the globalization of the paper industry, and slowing of industrial plantation expansion in the global South.

Microstructure and mechanical properties of unidirectionally solidified Al-Si-Ni ternary eutectic

Al-10.98 pct Si-4.9 pct Ni ternary eutectic alloy was unidirectionally solidified at growth rates from 1.39μm/sec to 6.95μm/sec. Binary Al-Ni and Al-Si eutectics prepared from the same purity metals were also solidified under similar conditions to characterize the growth conditions under the conditions of present study. NiAl3 phase appeared as fibers in the binary Al-Ni eutectic and silicon appeared as irregular plates in the binary Al-Si eutectic. However, in the ternary Al-Si-Ni eutectic alloy both NiAl3 and silicon phases appeared as irregular plates dispersed in α-Al phase, without any regular repctitive arrangement. The size and spacing of NiAl3 and Si platelets in cone shaped colonies decreased with an increase in the growth rate of the ternary eutectic. Examination of specimen quenched during unidirectional solidification indicated that the ternary eutectic grows with a non-planar interface with both Si and NiAl3 phases protruding into the liquid. It is concluded that it will be difficult to grow regular ternary eutectic structures even if only one phase has a high entropy of melting. The tensile strength and modulus of unidirectionally solidified Al-Si-Ni eutectic was lower than the chill cast alloys of the same composition, and decreased with a decrease in growth rate. Tensile modulus and strength of ternary Al-Si-Ni eutectic alloys was greater than binary Al-Si eutectic alloy under similar growth conditions, both in the chill cast and in unidirectionally solidified conditions.

Essays on Russia's Economic Transition

This study comprises an introductory section and three essays analysing Russia's economic transition from the early 1990s up to the present. The papers present a combination of both theoretical and empirical analysis on some of the key issues Russia has faced during its somewhat troublesome transformation from state-controlled command economy to market-based economy. The first essay analyses fiscal competition for mobile capital between identical regions in a transition country. A standard tax competition framework is extended to account for two features of a transition economy: the presence of two sectors, old and new, which differ in productivity; and a non-benevolent regional decision-maker. It is shown that in very early phase of transition, when the old sector clearly dominates, consumers in a transition economy may be better off in a competitive equilibrium. Decision-makers, on the other hand, will prefer to coordinate their fiscal policies. The second essay uses annual data for 1992-2003 to examine income dispersion and convergence across 76 Russian regions. Wide disparities in income levels have indeed emerged during the transition period. Dispersion has increased most among the initially better-off regions, whereas for the initially poorer regions no clear trend of divergence or convergence could be established. Further, some - albeit not highly robust - evidence was found of both unconditional and conditional convergence, especially among the initially richer regions. Finally, it is observed that there is much less evidence of convergence after the economic crisis of 1998. The third essay analyses industrial firms' engagement in provision of infrastructure services, such as heating, electricity and road maintenance. Using a unique dataset of 404 large and medium-sized industrial enterprises in 40 regions of Russia, the essay examines public infrastructure provision by Russian industrial enterprises. It is found that to a large degree engagement in infrastructure provision, as proxied by district heating production, is a Soviet legacy. Secondly, firms providing district heating to users outside their plant area are more likely to have close and multidimensional relations with the local public sector.

Empirical Analysis of Competition in Procurement Auctions

A vast amount of public services and goods are contracted through procurement auctions. Therefore it is very important to design these auctions in an optimal way. Typically, we are interested in two different objectives. The first objective is efficiency. Efficiency means that the contract is awarded to the bidder that values it the most, which in the procurement setting means the bidder that has the lowest cost of providing a service with a given quality. The second objective is to maximize public revenue. Maximizing public revenue means minimizing the costs of procurement. Both of these goals are important from the welfare point of view. In this thesis, I analyze field data from procurement auctions and show how empirical analysis can be used to help design the auctions to maximize public revenue. In particular, I concentrate on how competition, which means the number of bidders, should be taken into account in the design of auctions. In the first chapter, the main policy question is whether the auctioneer should spend resources to induce more competition. The information paradigm is essential in analyzing the effects of competition. We talk of a private values information paradigm when the bidders know their valuations exactly. In a common value information paradigm, the information about the value of the object is dispersed among the bidders. With private values more competition always increases the public revenue but with common values the effect of competition is uncertain. I study the effects of competition in the City of Helsinki bus transit market by conducting tests for common values. I also extend an existing test by allowing bidder asymmetry. The information paradigm seems to be that of common values. The bus companies that have garages close to the contracted routes are influenced more by the common value elements than those whose garages are further away. Therefore, attracting more bidders does not necessarily lower procurement costs, and thus the City should not implement costly policies to induce more competition. In the second chapter, I ask how the auctioneer can increase its revenue by changing contract characteristics like contract sizes and durations. I find that the City of Helsinki should shorten the contract duration in the bus transit auctions because that would decrease the importance of common value components and cheaply increase entry which now would have a more beneficial impact on the public revenue. Typically, cartels decrease the public revenue in a significant way. In the third chapter, I propose a new statistical method for detecting collusion and compare it with an existing test. I argue that my test is robust to unobserved heterogeneity unlike the existing test. I apply both methods to procurement auctions that contract snow removal in schools of Helsinki. According to these tests, the bidding behavior of two of the bidders seems consistent with a contract allocation scheme.

Essays in Philosophical Moral Psychology

The dissertation consists of four essays and a comprehensive introduction that discusses the topics, methods, and most prominent theories of philosophical moral psychology. I distinguish three main questions: What are the essential features of moral thinking? What are the psychological conditions of moral responsibility? And finally, what are the consequences of empirical facts about human nature to normative ethics? Each of the three last articles focuses on one of these issues. The first essay and part of the introduction are dedicated to methodological questions, in particular the relationship between empirical (social) psychology and philosophy. I reject recent attempts to understand the nature of morality on the basis of empirical research. One characteristic feature of moral thinking is its practical clout: if we regard an action as morally wrong, we either refrain from doing it even against our desires and interests, or else feel shame or guilt. Moral views seem to have a conceptual connection to motivation and emotions – roughly speaking, we can’t conceive of someone genuinely disapproving an action, but nonetheless doing it without any inner motivational conflict or regret. This conceptual thesis in moral psychology is called (judgment) internalism. It implies, among other things, that psychopaths cannot make moral judgments to the extent that they are incapable of corresponding motivation and emotion, even if they might say largely the words we would expect. Is internalism true? Recently, there has been an explosion of interest in so-called experimental philosophy, which is a methodological view according to which claims about conceptual truths that appeal to our intuitions should be tested by way of surveys presented to ordinary language users. One experimental result is that the majority of people are willing to grant that psychopaths make moral judgments, which challenges internalism. In the first article, ‘The Rise and Fall of Experimental Philosophy’, I argue that these results pose no real threat to internalism, since experimental philosophy is based on a too simple conception of the relationship between language use and concepts. Only the reactions of competent users in pragmatically neutral and otherwise conducive circumstances yield evidence about conceptual truths, and such robust intuitions remain inaccessible to surveys for reasons of principle. The epistemology of folk concepts must still be based on Socratic dialogue and critical reflection, whose character and authority I discuss at the end of the paper. The internal connection between moral judgment and motivation led many metaethicists in the past century to believe along Humean lines that judgment itself consists in a pro-attitude rather than a belief. This expressivist view, as it is called these days, has far-reaching consequences in metaethics. In the second essay I argue that perhaps the most sophisticated form of contemporary expressivism, Allan Gibbard’s norm-expressivism, according to which moral judgments are decisions or contingency plans, is implausible from the perspective of the theory of action. In certain circumstances it is possible to think that something is morally required of one without deciding to do so. Morality is not a matter of the will. Instead, I sketch on the basis of Robert Brandom’s inferentialist semantics a weak form of judgment internalism, according to which the content of moral judgment is determined by a commitment to a particular kind of practical reasoning. The last two essays in the dissertation emphasize the role of mutual recognition in the development and maintenance of responsible and autonomous moral agency. I defend a compatibilist view of autonomy, according to which agents who are unable to recognize right and wrong or act accordingly are not responsible for their actions – it is not fair to praise or blame them, since they lacked the relevant capacity to do otherwise. Conversely, autonomy demands an ability to recognize reasons and act on them. But as a long tradition in German moral philosophy whose best-known contemporary representative is Axel Honneth has it, both being aware of reasons and acting on them requires also the right sort of higher-order attitudes toward the self. Without self-respect and self-confidence we remain at the mercy of external pressures, even if we have the necessary normative competence. These attitudes toward the self, in turn, are formed through mutual recognition – we value ourselves when those who we value value us. Thus, standing in the right sort of relations of recognition is indirectly necessary for autonomy and moral responsibility. Recognition and valuing are concretely manifest in actions and institutions, whose practices make possible participation on an equal footing. Seeing this opens the way for a kind of normative social criticism that is grounded in the value of freedom and automomy, but is not limited to defending negative rights. It thus offers a new way to bridge the gap between liberalism and communitarianism.

'SABAM v scarlet: Evidence of an emerging backlash against corporate copyright lobbies in Europe?

The symbols, signs, and traces of copyright and related intellectual property laws that appear on everyday texts, objects, and artifacts have multiplied exponentially over the past 15 years. Digital spaces have revolutionized access to content and transformed the ways in which content is porous and malleable. In this volume, contributors focus on copyright as it relates to culture. The editors argue that what «counts» as property must be understood as shifting terrain deeply influenced by historical, economic, cultural, religious, and digital perspectives. Key themes addressed include issues of how: • Culture is framed, defined, and/or identified in conversations about intellectual property; • The humanities and other related disciplines are implicated in intellectual property issues; • The humanities will continue to rub up against copyright (e.g., issues of authorship, authorial agency, ownership of texts); • Different cultures and bodies of literature approach intellectual property, and how competing dynasties and marginalized voices exist beyond the dominant U.S. copyright paradigm. Offering a transnational and interdisciplinary perspective, Cultures of Copyright offers readers – scholars, researchers, practitioners, theorists, and others – key considerations to contemplate in terms of how we understand copyright’s past and how we chart its futures.

Metabolism of a monoterpene alcohol, linalool, by a soil pseudomonad

A microorganism of the genus Pseudomonas has been isolated from the soil by enrichment culture techniques with linalool(I) as the sole source of carbon and energy. The organism is also capable of utilizing limonene, citronellol, and geraniol as substrates but fails to grow on citral, critranellal, and 1,8-cineole. Fermentation of linalool by this bacterium in a mineral salt medium results in the formation of 10-hydroxylinalool(II), oleuropeic acid (IX), 2-vinyl-2-methyl-5-hydroxyisopropyl-tetraphydrofuran)linalool oxide, V), 2-vinyl-2-methyl-tetrahydrofuran-5-one(unsaturated lactone, VI), and few unidentified minor metabolities. Probable pathways for the biodegradation of linalool are presented.