Tool effects on hybrid laminates drilling

Fiber reinforced plastics are increasing their importance as one of the most interesting groups of material on account of their low weight, high strength, and stiffness. To obtain good quality holes, it is important to identify the type of material, ply stacking sequence, and fiber orientation. In this article, the drilling of quasi-isotropic hybrid carbon +glass/epoxy plates is analyzed. Two commercial drills and a special step drill are compared considering the thrust force and delamination extension. Results suggest that the proposed step drill can be a suitable option in laminate drilling.

Lesion detection performance in an anthropomorphic chest phantom: comparative analysis of low-dose CT data on two hybrid imaging systems

Introduction: multimodality environment; requirement for greater understanding of the imaging technologies used, the limitations of these technologies, and how to best interpret the results; dose optimization; introduction of new techniques; current practice and best practice; incidental findings, in low-dose CT images obtained as part of the hybrid imaging process, are an increasing phenomenon with advancing CT technology; resultant ethical and medico-legal dilemmas; understanding limitations of these procedures important when reporting images and recommending follow-up; free-response observer performance study was used to evaluate lesion detection in low-dose CT images obtained during attenuation correction acquisitions for myocardial perfusion imaging, on two hybrid imaging systems.

Damage assessment of drilled hybrid composite laminates

Hole drilling operations are common in fibre reinforced plastics - FRP’s - to facilitate fastener assembly to other parts in more complex structures. As these materials are non-homogeneous, drilling causes some damages, like delamination, for example. Delamination can be reduced by a careful selection of drilling parameters, drill material and drill bit geometry. In this work two types of laminates are drilled using different machining parameters and comparing drill geometries. Results show the importance of a cautious selection of these variables when composites’ drilling is involved.

Extended immersive learning environment: a hybrid remote/virtual laboratory

This paper presents a collaborative virtual learning environment, which includes technologies such as 3D virtual representations, learning and content management systems, remote experiments, and collaborative learning spaces, among others. It intends to facilitate the construction, management and sharing of knowledge among teachers and students, in a global perspective. The environment proposes the use of 3D social representations for accessing learning materials in a dynamic and interactive form, which is regarded to be closer to the physical reality experienced by teachers and students in a learning context. A first implementation of the proposed extended immersive learning environment, in the area of solid mechanics, is also described, including the access to theoretical contents and a remote experiment to determine the elastic modulus of a given object.These instructions give you basic guidelines for preparing camera-ready papers for conference proceedings. Use this document as a template if you are using Microsoft Word 6.0 or later. Otherwise, use this document as an instruction set. The electronic file of your paper will be formatted further. Define all symbols used in the abstract. Do not cite references in the abstract.

Derivation methods for hybrid knowledge bases with rules and ontologies

Trabalho apresentado no âmbito do Mestrado em Engenharia Informática, como requisito parcial para obtenção do grau de Mestre em Engenharia Informática

Short-term electricity prices forecasting in a competetive market by a hybrid Pso-Anfis approach

In this paper, a novel hybrid approach is proposed for electricity prices forecasting in a competitive market, considering a time horizon of 1 week. The proposed approach is based on the combination of particle swarm optimization and adaptive-network based fuzzy inference system. Results from a case study based on the electricity market of mainland Spain are presented. A thorough comparison is carried out, taking into account the results of previous publications, to demonstrate its effectiveness regarding forecasting accuracy and computation time. Finally, conclusions are duly drawn.

High-performance flexible hybrid field-effect transistors based on cellulose fiber paper

IEEE Electron Device Letters, VOL. 29, NO. 9,

Bitocast: a hybrid BitTorrent and IP Multicast content distribution solution

Dissertação apresentada para obtenção do Grau de Mestre em Informática, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

IVA : o regime de contabilidade de caixa e o ciclo de caixa das empresas

Mestrado em Fiscalidade

Contributo das tecnologias de informação na gestão do regime terapêutico no diabético

A diabetes é a doença do seculo XXI, atinge mais de um milhão de portugueses cada vez mais jovens em idades trabalhadoras, e já custa mais de 1% do PIB, além dos enormes danos que pode causar às pessoas e à sociedade. Segundo o Relatório Anual do Observatório Nacional da Diabetes, em 2011, cerca de um quarto da população portuguesa integrada no escalão etário dos 60 aos 79 tem Diabetes. Um estudo realizado pelo Lisbon Internet and Networks Institute (LINI), em 2010, diz-nos que “a internet é um recurso para a informação e educação para a saúde”. Em 2010 49% dos lares portugueses possuem acesso à internet e 44% da população é utilizadora (acréscimo significativo relativamente aos 29% em 2003). Destes, dois terços têm entre os 15 e os 24 anos. Os idosos representam 1,6%, dos quais os reformados e pensionistas representam 5%, as domésticas representam 11% e os trabalhadores manuais 22%, sendo estes os menos utilizadores. Um terço da restante população procura informação sobre saúde semanalmente, cerca de 16%. Face à atual conjuntura económica, com restrições orçamentais, nomeadamente na área da saúde, devem-se encontrar meios para prevenir e lidar com a Diabetes numa perspetiva de custo-benefício, isto porque a Diabetes pode reduzir as oportunidades de emprego e de aprendizagem. O atual diretor da Organização para a Cooperação e Desenvolvimento Económico (OCDE) Yyes Leterme diz que “Prevenir e tratar a Diabetes e as suas complicações custa cerca de 90 mil milhões de euros anualmente na Europa”. Atualmente, não é muito utilizado nem explorado o potencial das tecnologias de informação e as ferramentas web ao serviço da saúde, quer por profissionais de saúde, quer por utentes na gestão ao regime terapêutico na doença crónica, mais precisamente na gestão adequada da Diabetes. Potenciar uma visão integrada dos diferentes recursos de comunicação e a sua utilização conjugada com a promoção da saúde e prevenção da doença poderá enfatizar em termos de eficácia e eficiência a minimização de recursos das organizações de saúde e promover a gestão adequada da Diabetes. Tendo por base esta problemática, este estudo pretende abordar e refletir o possível contributo das tecnologias de informação e das ferramentas web na gestão adequada ao regime terapêutico da Diabetes.

Examination timetabling automation using hybrid meta-heuristics

Trabalho de projeto realizado para obtenção do grau de Mestre em Engenharia Informática e de Computadores

Simulação laboratorial e numérica da remoção, em regime transiente, de tolueno da água através de arrastamento por ar

O tolueno tem uma vasta aplicação industrial e apresenta alguns riscos para a saúde humana. A existência de deficientes redes de infra-estruturas de saneamento básico e de protecções ambientais adequadas promovem, com relativa facilidade, a poluição de recursos hídricos subterrâneos com este tipo de composto orgânico volátil (COV). Legislação comunitária, recentemente publicada, exige que se cumpra a médio prazo padrões mínimos de qualidade apontando como limite máximo de concentração de tolueno na água destinada a consumo humano o valor de 1 miligrama por litro. O processo de arrastamento por ar em colunas com enchimento desordenado é uma das técnicas de remoção disponíveis, embora ainda pouco implementada no nosso país. Neste trabalho simulouse, laboratorial e numericamente, a remoção do tolueno da água, em regime transiente, através desta tecnologia sob condições operatórias pré-estabelecidas.

Hybrid thermoset polymeric composites – an Innovation towards sustainability

In this study, a new waste management solution for thermoset glass fibre reinforced polymer (GFRP) based products was assessed. Mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the prospective added-value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. Different GFRP waste admixed mortar formulations were analyzed varying the content, between 4% up to 12% in weight, of GFRP powder and fibre mix waste. The effect of incorporation of a silane coupling agent was also assessed. Design of experiments and data treatment was accomplished through implementation of full factorial design and analysis of variance ANOVA. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacity of GFRP waste admixed mortars with regard to unmodified polymer mortars. The key findings of this study showed a viable technological option for improving the quality of polyester based mortars and highlight a potential cost-effective waste management solution for thermoset composite materials in the production of sustainable concrete-polymer based products.

Innovative manufacturing process for hybrid pultruded products based on cork and polymeric pre-shapes

Pultruded products are being targeted by a growing demand due to its excellent mechanical properties and low chemical reactivity, ensuring a low level of maintenance operations and allowing an easier assembly operation process than equivalent steel bars. In order to improve the mechanical drawing process and solve some acoustic and thermal insulation problems, pultruded pipes of glass fibre reinforced plastics (GFRF) can be filled with special products that increase their performance regarding the issues previously referred. The great challenge of this work was drawing a new equipment able to produce pultruded pipes filled with cork or polymeric pre-shaped bars as a continuous process. The project was carried out successfully and the new equipment was built and integrated in the pultrusion equipment already existing, allowing to obtain news products with higher added-value in the market, covering some needs previously identified in the field of civil construction.

(Des)vantagens do regime especial de tributação dos grupos de sociedades

Dissertação para obtenção do Grau de Mestre em Contabilidade e Finanças Orientador: Mestre, Gabriela Pinheiro