A fast-track program reduces complications and length of hospital stay after open colonic surgery.

BACKGROUND & AIMS: A fast-track program is a multimodal approach for patients undergoing colonic surgery that combines stringent regimens of perioperative care (fluid restriction, optimized analgesia, forced mobilization, and early oral feeding) to reduce perioperative morbidity, hospital stay, and cost. We investigated the impact of a fast-track protocol on postoperative morbidity in patients after open colonic surgery. METHODS: A randomized trial of patients in 4 teaching hospitals in Switzerland included 156 patients undergoing elective open colonic surgery who were assigned to either a fast-track program or standard care. The primary end point was the 30-day complication rate. Secondary end points were severity of complications, hospital stay, and compliance with the fast-track protocol. RESULTS: The fast-track protocol significantly decreased the number of complications (16 of 76 in the fast-track group vs 37 of 75 in the standard care group; P = .0014), resulting in shorter hospital stays (median, 5 days; range, 2-30 vs 9 days, respectively; range, 6-30; P < .0001). There was a trend toward less severe complications in the fast-track group. A multiple logistic regression analysis revealed fluid administration greater than the restriction limits (odds ratio, 4.198; 95% confidence interval, 1.7-10.366; P = .002) and a nonfunctioning epidural analgesia (odds ratio, 3.365; 95% confidence interval, 1.367-8.283; P = .008) as independent predictors of postoperative complications. CONCLUSIONS: The fast-track program reduces the rate of postoperative complications and length of hospital stay and should be considered as standard care. Fluid restriction and an effective epidural analgesia are the key factors that determine outcome of the fast-track program.

Noninvasive characterization of the fission yeast cell cycle by monitoring dry mass with digital holographic microscopy.

Digital holography microscopy (DHM) is an optical technique which provides phase images yielding quantitative information about cell structure and cellular dynamics. Furthermore, the quantitative phase images allow the derivation of other parameters, including dry mass production, density, and spatial distribution. We have applied DHM to study the dry mass production rate and the dry mass surface density in wild-type and mutant fission yeast cells. Our study demonstrates the applicability of DHM as a tool for label-free quantitative analysis of the cell cycle and opens the possibility for its use in high-throughput screening.

How useful is satellite positioning system (GPS) to track gait parameters? A review.

Over the last century, numerous techniques have been developed to analyze the movement of humans while walking and running. The combined use of kinematics and kinetics methods, mainly based on high speed video analysis and forceplate, have permitted a comprehensive description of locomotion process in terms of energetics and biomechanics. While the different phases of a single gait cycle are well understood, there is an increasing interest to know how the neuro-motor system controls gait form stride to stride. Indeed, it was observed that neurodegenerative diseases and aging could impact gait stability and gait parameters steadiness. From both clinical and fundamental research perspectives, there is therefore a need to develop techniques to accurately track gait parameters stride-by-stride over a long period with minimal constraints to patients. In this context, high accuracy satellite positioning can provide an alternative tool to monitor outdoor walking. Indeed, the high-end GPS receivers provide centimeter accuracy positioning with 5-20 Hz sampling rate: this allows the stride-by-stride assessment of a number of basic gait parameters--such as walking speed, step length and step frequency--that can be tracked over several thousand consecutive strides in free-living conditions. Furthermore, long-range correlations and fractal-like pattern was observed in those time series. As compared to other classical methods, GPS seems a promising technology in the field of gait variability analysis. However, relative high complexity and expensiveness--combined with a usability which requires further improvement--remain obstacles to the full development of the GPS technology in human applications.

Fission yeast Sec3 and Exo70 are transported on actin cables and localize the exocyst complex to cell poles.

The exocyst complex is essential for many exocytic events, by tethering vesicles at the plasma membrane for fusion. In fission yeast, polarized exocytosis for growth relies on the combined action of the exocyst at cell poles and myosin-driven transport along actin cables. We report here the identification of fission yeast Schizosaccharomyces pombe Sec3 protein, which we identified through sequence homology of its PH-like domain. Like other exocyst subunits, sec3 is required for secretion and cell division. Cells deleted for sec3 are only conditionally lethal and can proliferate when osmotically stabilized. Sec3 is redundant with Exo70 for viability and for the localization of other exocyst subunits, suggesting these components act as exocyst tethers at the plasma membrane. Consistently, Sec3 localizes to zones of growth independently of other exocyst subunits but depends on PIP(2) and functional Cdc42. FRAP analysis shows that Sec3, like all other exocyst subunits, localizes to cell poles largely independently of the actin cytoskeleton. However, we show that Sec3, Exo70 and Sec5 are transported by the myosin V Myo52 along actin cables. These data suggest that the exocyst holocomplex, including Sec3 and Exo70, is present on exocytic vesicles, which can reach cell poles by either myosin-driven transport or random walk.

Linking microtubules to the activation of CDC42 in fission yeast

Cell polarity is an essential property of most cell types and relies on a dynamic cytoskeleton of actin filaments and microtubules. In rod-shaped S. pombe cells microtubules are organized along the length of the cell and transport polarity factors to cell tips to regulate cell polarity. An important cell polarity factor is the protein Tea4, which is responsible for correct cell morphogenesis and bipolar growth. During my research I confirmed the known transport mechanism of Tea4 and I also showed alternative localization and anchoring mechanisms at the cell ends. Tea4 contains a conserved SH3 domain, the function of which was unknown and my results show that the SH3 domain of Tea4 is essential for Tea4 function in vivo. First, cells with tea4SH3 mutations show aberrant cell shapes and monopolar growth patterns similar to tea4A and in addition SH3 domain is important for proper localization of multiple cell polarity proteins. Second, I showed that Tea4 associates with Type 1 Phosphatase Dis2 through both its SH3 domain and an RVxF motif. Tea4 also binds the DYRK kinase Pomi through its SH3 domain. In addition Tea4 is proposed to promote the local dephosphorylation of Pomi by Dis2 to induce the formation of a cortical gradient from cell ends essential for cell size homeostasis. Polarized growth is also controlled by cell tip-localized Cdc42. This Rho- family GTPase is activated by the Guanine Exchange Factors Gef1 and Scd1 and inactivated by the Rho GTPase Activating Protein Rga4. In this study, I investigated the mechanisms of how Tea4 promotes Cdc42 activation. My work suggests that Tea4 promotes the local exclusion of Rga4, which in turn allows the accumulation of active Cdc42, which may result in growth. Exclusion of Rga4 by Tea4 is likely to be mediated by Dis2-dependent dephosphorylation. These results suggest a molecular pathway that links the microtubule- associated factor Tea4 with Cdc42 to promote cell polarization and morphogenesis. - La polarité cellulaire est une propriété essentielle de la plupart des types cellulaires et s'appuie sur une dynamique des cytosquelettes d'actine et de microtubules. Dans les cellules en forme de bâtonnet de S. pombe les microtubules sont alignés selon l'axe longitudinal de la cellule et les facteurs de polarité transportés aux extrémité cellulaires afin de réguler la polarité cellulaire. Un facteur important de polarité cellulaire est la protéine Tea4, qui est responsable de la morphogenèse des cellules et leur croissance bipolaire. Au cours de mes recherches, j'ai confirmé les mécanismes connus de transport de Tea4 et j'ai aussi mis en évidence d'autres mechanismes de localisation et d'ancrage de Tea4 aux extrémités cellulaires. Tea4 contient un domaine SH3 conservé, dont la fonction était inconnue et mes résultats montrent que le domaine SH3 est essentiel pour la fonction de Tea4 in vivo. Tout d'abord, les cellules avec des mutations tea4sm ont des formes aberrantes et leur croissance est monopolaire de manière similaire au mutant tea4A. De plus ce domaine SH3 est important pour la localisation correcte de plusieurs protéines de polarité cellulaire. Deuxièmement, j'ai montré que Tea4 s'associe avec la Phosphatase de Type-1 Dis2 par son domaine SH3 et un motif RVxF. Tea4 se lie également la kinase DYRK Pomi par son domaine SH3. De plus, Tea4 pourrait favoriser la déphosphorylation locale de Pomi par Dis2 afin d'induire la formation d'un gradient cortical de Pomi essentiel pour l'homéostasie de la longueur des cellules. La croissance polarisée est également contrôlée par la protéine Cdc42 localisée aux extrémités cellulaires. Cette GTPase de la famille de Rho GTPase est activée par les facteurs échange de guanine Gef1 et Scd1 et inactivée par la protéine "Rho GTPase activating" Rga4. Dans cette étude, j'ai étudié les mécanismes d' activation de Cdc42 par Tea4. Mes résultats suggèrent que Tea4 favorise l'exclusion locale de Rga4, ce qui permet l'accumulation de Cdc42 active, nécessaire à la croissance. L' exclusion de Rga4 par Tea4 est vraisemblablement médiée par une déphosphorylation Dis2- dépendente. Ces résultats suggèrent une voie moléculaire qui lie le facteur associé aux microtubules Tea4 à Cdc42 pour promouvoir la polarisation cellulaire et la morphogenèse. - Cell polarity is important for several essential biological functions such as generation of distinct cell fates during development and function of differentiated cells. Defective cell polarity has been related to uncontrolled cell division and subsequently to cancer initiation. Cell polarity depends on a functional cytoskeleton that consists of actin filaments and microtubules, which maintains cell shape, helps cellular motion, enables intracellular protein transport and plays a vital role in cell division. A component of cytoskeleton is microtubules that regulate cell polarization in diverse cell types. During my research, I worked with Schizosaccharomyces pombe, also named fission yeast, a powerful unicellular model organism that allows combination of genetic, biochemical and microscopic analysis for the proper study of cell polarity. Microtubule-associated protein Tea4 is transported to cell tips where it is thought to organize polarized growth. I showed that Tea4 and its evolutionarily conserved SH3 domain play an important role for maintenance of fission yeast cells shape and growth. Furthermore, Tea4 is responsible for the proper localization of multiple polarity proteins and acts as a mediator to control the local activity of an essential polarity regulator called Cdc42. Thus, my results provide a better understanding of the molecular mechanisms that regulate cell polarity. - La polarité cellulaire est importante pour plusieurs fonctions biologiques essentielles telles que la différenciation cellulaires au cours du développement et de la fonction de cellules différenciées. Les défauts de la polarité cellulaire ont été liés à des divisions cellulaires incontrôlées et à l'initiation de tumeur. La polarité cellulaire dépend d'un cytosquelette fonctionnel, qui maintient la forme des cellules, aide à la migration cellulaire, permet le transport intracellulaire des protéines et joue un rôle essentiel dans la division cellulaire. Un composant du cytosquelette est constitué de microtubules qui régissent la polarisation cellulaire dans divers types cellulaires. Au cours de mes recherches, j'ai travaillé avec Schizosaccharomyces pombe, appelé également levure fissipare, un modèle unicellulare puissant qui permet la combinaison de différentes d'approches expérimentales: génétiques, biochimiques et microscopiques pour l'étude de la polarité cellulaire. La protéine Tea4 associée aux microtubules est transportée aux extrémités cellulaires où elle organise la croissance polarisée. J'ai montré que Tea4 et son domaine conservé SH3 jouent un rôle important pour le maintien de la forme des cellules de levure et leur croissance. De plus, Tea4 est responsable de la localisation correcte de multiples facteurs de polarité et agit comme un médiateur pour contrôler l'activité locale d'un régulateur de polarité essentiel appelé Cdc42. Ainsi, mes résultats permettent de mieux comprendre les mécanismes moléculaires qui régulent la polarité cellulaire.

Concrete Pavement Mixture Design and Analysis (MDA): Application of a Portable X-Ray Fluorescence Technique to Assess Concrete Mix Proportions , TPF-5(205), 2012

Any transportation infrastructure system is inherently concerned with durability and performance issues. The proportioning and uniformity control of concrete mixtures are critical factors that directly affect the longevity and performance of the portland cement concrete pavement systems. At present, the only means available to monitor mix proportions of any given batch are to track batch tickets created at the batch plant. However, this does not take into account potential errors in loading materials into storage silos, calibration errors, and addition of water after dispatch. Therefore, there is a need for a rapid, cost-effective, and reliable field test that estimates the proportions of as-delivered concrete mixtures. In addition, performance based specifications will be more easily implemented if there is a way to readily demonstrate whether any given batch is similar to the proportions already accepted based on laboratory performance testing. The goal of the present research project is to investigate the potential use of a portable x-ray fluorescence (XRF) technique to assess the proportions of concrete mixtures as they are delivered. Tests were conducted on the raw materials, paste and mortar samples using a portable XRF device. There is a reasonable correlation between the actual and calculated mix proportions of the paste samples, but data on mortar samples was less reliable.

ConnectomeViewer - Multi-Modal Multi-Level Network Visualization and Analysis.

Introduction: The field of Connectomic research is growing rapidly, resulting from methodological advances in structural neuroimaging on many spatial scales. Especially progress in Diffusion MRI data acquisition and processing made available macroscopic structural connectivity maps in vivo through Connectome Mapping Pipelines (Hagmann et al, 2008) into so-called Connectomes (Hagmann 2005, Sporns et al, 2005). They exhibit both spatial and topological information that constrain functional imaging studies and are relevant in their interpretation. The need for a special-purpose software tool for both clinical researchers and neuroscientists to support investigations of such connectome data has grown. Methods: We developed the ConnectomeViewer, a powerful, extensible software tool for visualization and analysis in connectomic research. It uses the novel defined container-like Connectome File Format, specifying networks (GraphML), surfaces (Gifti), volumes (Nifti), track data (TrackVis) and metadata. Usage of Python as programming language allows it to by cross-platform and have access to a multitude of scientific libraries. Results: Using a flexible plugin architecture, it is possible to enhance functionality for specific purposes easily. Following features are already implemented: * Ready usage of libraries, e.g. for complex network analysis (NetworkX) and data plotting (Matplotlib). More brain connectivity measures will be implemented in a future release (Rubinov et al, 2009). * 3D View of networks with node positioning based on corresponding ROI surface patch. Other layouts possible. * Picking functionality to select nodes, select edges, get more node information (ConnectomeWiki), toggle surface representations * Interactive thresholding and modality selection of edge properties using filters * Arbitrary metadata can be stored for networks, thereby allowing e.g. group-based analysis or meta-analysis. * Python Shell for scripting. Application data is exposed and can be modified or used for further post-processing. * Visualization pipelines using filters and modules can be composed with Mayavi (Ramachandran et al, 2008). * Interface to TrackVis to visualize track data. Selected nodes are converted to ROIs for fiber filtering The Connectome Mapping Pipeline (Hagmann et al, 2008) processed 20 healthy subjects into an average Connectome dataset. The Figures show the ConnectomeViewer user interface using this dataset. Connections are shown that occur in all 20 subjects. The dataset is freely available from the homepage (connectomeviewer.org). Conclusions: The ConnectomeViewer is a cross-platform, open-source software tool that provides extensive visualization and analysis capabilities for connectomic research. It has a modular architecture, integrates relevant datatypes and is completely scriptable. Visit www.connectomics.org to get involved as user or developer.

Spatial and temporal regulation of " cdc16p " in the fission yeast " Schizosaccharomyces pombe "

Abstract: The fission yeast Schizosaccharomyces pombe has proven to be an excellent model system for the study of eukaryotic cell cycle control. S. pombe cells are rod-shaped and grow mainly by elongation at their tips. They divide by the means of a centrallyplaced division septum which provides two daughter cells of equal size. S. pombe cytokinesis begins at mitotic entry, when the division site is defined by formation of the contractile acto-myosin ring (CAR). Formation of the division septum is triggered at the end of mitosis by the spindle pole body (SPB) associated septation initiation network (SIN) proteins. SIN signalling requires activation of the GTPase spg1p, whose nucleotide status is regulated by the bipartite GAP byr4pcdc16p. Removal of cdc16p from the SPB during early mitosis is thought to allow priming of the SIN by association of cdc7p with both SPBs. During anaphase cdc7p is retained on the new SPB, which also recruits the kinase sid1 p and cdc14p, while the old SP8 reassembles the byr4-cdc16p GAP and is presumed not to signal; SPB asymmetry persists throughout anaphase. The trigger for inactivation of SIN signalling at the new SPB is unknown. This study has concentrated upon cdc16p. We have undertaken the analysis of the localisation of cdc16p using time-lapse microscopy. We have observed that the localisation of cdc16p is regulated at different transitions. We have shown that cdc16p is removed from the SPB prior to the onset of spindle formation and that it reappears asymmetrically at the beginning of anaphase B. We have also demonstrated that the resetting of the SIN at the new SPB is linked to completion of CAR contraction and septum formation. We propose the existence of a mechanism that monitors cytokinesis and that couples the activity of the SI N with the presence of the CAR. During the biochemical characterization of cdc16p, We have found that it is an unstable protein and that it is subjected to polyubiquitination by the SCF and proteasomal degradation. Together, these observations help to shed new light upon the mechanisms by which cytokinesis is regulated in S. pombe. Résumé: La levure Schizosaccharomyces pombe est un excellent organisme modèle pour l'étude du cycle cellulaire eucaryote. Les cellules S. pombe ont la forme de bâtonnets et croissent par l'allongement de leurs extrémités. Elles se divisent en formant, en leur milieu une paroi cellulaire, appelé septum, permettant ainsi l'obtention de deux cellules filles de même taille. Chez S. pombe, la cytokinèse commence en début de mitose lorsque le site de division est déterminé par la formation d'un anneau d'acto-myosine. Le septum, lui, est formé uniquement en fin de mitose par la contraction de l'anneau d'actomyosine. Cette contraction est sous le contrôle d'un réseau de signalisation cellulaire appelé le «réseau d'initiation de synthèse du septum » ou « septation initiation network » (SIN), qui se situe sur les pôles du fuseau mitotique. L'activation du SIN dépend d'une GTPase appelé spg1p dont le statut nucléotidique dépend des protéines cdclóp et byr4p qui forment un complexe qui favorise l'hydrolyse du GTP en GDP. En début de mitose, cdc16p ne se situe plus sur les poles du fuseau mitotique. La GTPase spg1p se retrouve donc principalement sous sa forme couplée au GTP, ce quí va permettre son interaction avec la kinase cdc7p. Cette protéine ainsi que deux autres kinases sid2p (avec mob1p) et sid1p (avec cdc14p) permettent la transmission du signal d'initiation de la contraction de l'anneau d'acto-myosine en fin d'anaphase. Pendant l'anaphase, cdc7p, sid1 p et cdc14p localisent sur un des deux pôles du fuseau mitotique. Il en est de même pour cdc1p et by14p et le pôle contenant cdc16p et byr4p est toujours différent de celui ou les régulateurs positifs du SIN se situent. En fin de cytokinèse, cdc16 et byr4p se retrouvent à nouveau sur chaque pôle des deux cellules filles. Dans cette étude, nous nous sommes concentrés sur l'analyse de la localisation de cdc16p pendant la mitose en utilisant une technique de microscopie en temps réel. Nous avons été en mesure de déterminer que le départ de cdc16p du pole s'effectue juste avant la formation du fuseau mitotique. Nous avons aussi découvert que la localisation asymétrique des composants du SIN dépend fortement de l'entrée en anaphase B. Finalement, Nous avons montré que distribution asymétrique des composants du SIN sur les pôles du fuseau mitotique dépendait aussi fortement de !a présence de l'anneau d'acto-myosine. Ceci nous permet donc de proposer l'existence d'un mécanisme cellulaire qui permet de s'assurer que la cytokinèse est achevée avant de diminuer la signalisation du SIN. Par ailleurs, des études biochimiques nous ont permis de montrer que cdc16p est dégradé par le proteosome. Ces travaux ont permis la découverte de nouveaux modes de régulation du SIN.

Should Koos grade I vestibular schwannomas be treated early with gamma knife surgery? A subgroup analysis in a series of 190 consecutive patients.

INTRODUCTION: Gamma knife surgery (GKS) for vestibular schwannomas (VS) has a long-term clinical and scientific track record. After a period of de-escalation of dose prescription, results show a high rate of tumor control with improvement of clinical outcome (less than 1% facial palsy, 50-70% hearing preservation). Régis et al. (J Neurosurg 2013;119 Suppl.:105-11) suggested recently that proactive GKS management in intracanalicular tumors is better than a « wait and see » strategy when hearing is still useful at the time of diagnosis. MATERIALS AND METHODS: Based on these previous findings, we prospectively analyzed 190 vestibular schwannomas (VS), treated with GKS as first intention over a period of 4 years (2010-2014). We concentrated on patient, tumor and dosimetric characteristics. Special attention was given on the dose to the cochlea and its impact in maintaining serviceable hearing. RESULTS: The mean follow-up period was 1.3years (range 0.6-3.6). Preoperative serviceable hearing was present in 63.11% patients. The mean maximal diameter was 15.1mm (range 5-29.5). The size and volume of the tumor corresponded to Koos grade I, II, III and IV in 15.9%, 34.8%, 45.4% and 3.8% of the cases, respectively. The mean target volume was 1.24cm(3) (0.017-7.8). The mean prescription isodose volume was 1.6 cc (0.032-8.5). The mean marginal dose was 12Gy (11-12). The mean maximal dose received by the cochlea in patients with GR class 1 and 2 was 4.1Gy (1.5-7.6). Our preliminary neuroradiological follow-up shows 97% tumor control, with 45% shrinkage. Patients presenting with GR class 1 and class 2 at baseline retained serviceable hearing in 85% of cases. Among the patients with a follow-up of at least one year, those with Koos I tumors had the highest probability to maintain identical level of hearing after GKS. CONCLUSION: Our preliminary data suggest that Koos I patients should be treated early with GKS, before tumor growth and/or hearing deterioration, as they have the highest probability of hearing preservation.

Cytoskeletal and DNA structure abnormalities result from bypass of requirement for the cdc10 start gene in the fission yeast Schizosaccharomyces pombe.

The cdc10 gene of the fission yeast S. pombe is required for traverse of the start control in late G1 and commitment to the mitotic cell cycle. To increase our understanding of the events which occur at start, a pseudoreversion analysis was undertaken to identify genes whose products may interact with cdc10 or bypass the requirement for it. A single gene, sct1+ (suppressor of cdc ten), has been identified, mutation of which suppresses all conditional alleles and a null allele of cdc10. Bypass of the requirement for cdc10+ function by sct1-1 mutations leads to pleiotropic defects, including microtubule, microfilament and nuclear structural abnormalities. Our data suggest that sct1 encodes a protein that is dependent upon cdc10+ either for its normal function or expression, or is a component of a checkpoint that monitors execution of p85cdc10 function.

Deregulation of Railroads and Future Development Scenarios in Europe - Literature Analysis of Privatization Process Taken Place in US, UK and Sweden

Euroopan unionissa päätettiin jo yli vuosikymmen sitten, että rautatieliiketoiminta vapautetaan kilpailulle. Iso-Britanniasta olimäärä tulla esimerkkivaltio tämän prosessin käyttöönotossa. Pääideana oli säännöstelyn keventäminen, jolloin omistuspohja toimialalla laajenee ja rautateiden infrastruktuuri sekä toiminta parantuvat. Infrastruktuuri on määrä olla yhden organisaation hallinnassa ja raiteiden käyttöoikeus on kaikilla lupaehdot täyttävillä operaattoreilla, jotka kilpailevat keskenään matkustajista ja tavararahdeista. Kuitenkin Yhdysvalloissa ja eräissä Latinalaisen Amerikan maissa kilpailu on vapautettu siten, että rautatieyritys omistaa raideinfrastruktuurin, junat, tavarankuljetus- sekä matkustajavaunut. Iso-Britannian yksityistämistä pidettiin aluksi isonaepäonnistumisena: nopealla aikataululla sovellettiin jäykkiä transaktioperusteisia ulkoistamisstrategioita infrastruktuurin kunnossapitoon, jotka lopulta johtivat junien jatkuviin myöhästymisiin ja muutamaan tuhoisaan onnettomuuteen. Liiketoiminnallisessa mielessäkään ei oikein onnistuttu: infrastruktuurista vastaava yritys jouduttiin listaamaan pois Lontoon pörssistä, ja hallituksen oli pakko luoda tukipaketti pahasti velkaantuneen, vain marginaalisien investointien kohteena olleen yrityksen toimintaa varten (vaikka kapasiteettitarvetta oli markkinoilla). Myös rautatieoperaattorit olivat taloudellisessa ahdingossa ja vain määrätietoisten hallituksen laatimien pelastuspakettien avulla ala nousi syvimmästä kriisistään. Tästä huolimatta näiden negatiivisten sivuvaikutusten ohella koko ala pystyi kasvattamaan kysyntää, niin matkustaja- kuin rahtiliikenteenkin osalta. Vähenevän kysynnän trendi, joka alkoi 1970-luvulla, otti käännöksen parempaan. Toinen eurooppalaismaa, jolla on pitkät kokemukset yksityistämisestä, on Ruotsi. Tämä maatapaus on melko konservatiivinen verrattuna tilanteeseen edellisessä; vain rajattu määrä reittejä on avattu kilpailulle ja sopimukset tehdään kerralla pitkäksi aikaa eteenpäin. Ruotsin säännöstelyn purku osoittautui menestykseksi, koska tuottavuus onollut vakaassa kasvussa ja rautateiden markkinaosuus erityisesti matkustajapuolella on noussut merkittävästi, verrattuna muihin kuljetusmuotoihin. Kuitenkin kilpailua on käytännössä vähän tässä maassa ja parempiatuloksia on lupa odottaa, kun vain säännöstelyn purkaminen jatkuu. Viimeinen tutkimuksemme kohteena oleva maa on Yhdysvallat, joka alistutti rautatiet kilpailulle jo 1980-luvun alussa, käyttäen jo edellä mainittua vertikaalista integraatiota; tämä valinta on taas johtanut hyvin erilaisiin tuloksiin. Vaihtoehtoinen rakenteellinen uudistustapa on suosinut rahtivirtoja matkustajiin nähden, ja lopputuloksena tämä tapaus synnytti yrityksiä huolehtimaan toista näistä kahdesta pääasiakasryhmästä. Viimeaikaiset tulokset tästä yksityistämisprosessista ovat olleet hyviä: jäljellejääneiden yritysten voitot ovat kasvaneet, osinkoja ollaan kyetty jakamaan ja osakkeiden arvostus on noussut. Tässä tutkimusraportissa yritämme kolmen maatapauksen kautta esittää, miten yksityistämisprosessi tulee vaikuttamaan Euroopassa, kun kilpailu rautateillä vapautuu. Me käymmeläpi, mikä näistä kolmesta maaesimerkistä on kaikkein todennäköisin jaesitämme ehdotuksia siihen, miten valtiot voisivat välttää ei-haluttuja sivuvaikutuksia. Kolme maaesimerkkiä, ja lopuksi esitetty lyhyt tilastollinen analyysi osoittavat, että rautateillä on tulevaisuuden potentiaalia Euroopassa, ja kilpailun vapauttaminen on avain tämän potentiaalin realisointiin.

Logistics Development in Finnish and Swedish Companies with Respect of Russia and Four Asian Countries: Traffic Flow and Warehousing Analysis from Current Situation and Likely Development Trends

On selvää, että tänä päivänä maailmankaupan painopiste on hiljalleen siirtymässä Aasiaan ja varsinkin Kiina on ollut huomion keskipisteessä. Erityisesti valmistavien yritysten perspektiivistä muutos on ollut merkittävä ja tämä tosiasia kasvattaa yrityksissä paineita luoda kustannustehokkaita toimitusketjuratkaisuja,joiden vasteaika on mahdollisimman lyhyt. Samaan aikaan kun tarkastellaan kuljetusvirtoja, huomattaan että maanosien välillä on suuri epätasapaino. Tämä on enimmäkseen seurausta suurten globaalisti toimivien yritysten toimitusketjustrategioista. Useimmat näistä toimijoista optimoivat verkostonsa turvautumalla 'paikalliseen hankintaan', jotta he voisivat paremmin hallita toimitusketjujaan ja saada näitä reagointiherkimmiksi. Valmistusyksiköillä onkin monesti Euroopassa pakko käyttää kalliita raaka-aineita ja puolivalmisteita. Kriittisiksi tekijöiksi osoittautuvat kuljetus- ja varastointikustannukset sekä näiden seurauksena hukka-aika, joka aiheutuu viivästyksistä. Voidakseen saavuttaa optimiratkaisun, on tehtävä päätös miten tuotteet varastoidaan: keskitetysti tai hajautetusti ja integroida tämä valinta sopivien kuljetusmuotojen kanssa. Aasiasta Pohjois-Eurooppaan on halpaa käyttää merikuljetusta, mutta operaatio kestää hyvin pitkään - joissain tapauksessa jopa kahdeksan viikkoa. Toisaalta lentokuljetus on sekä kallis että rajoittaa siirrettävien tuotteiden eräkokoa.On olemassa kolmaskin vaihtoehto, josta voisi olla ratkaisuksi: rautatiekuljetus on halvempi kuin lentokuljetus ja vasteajat ovat lyhyemmät kuin merikuljetuksissa. Tässä tutkimuksessa tilannetta selvitetään kyselyllä, joka suunnattiin Suomessa ja Ruotsissa toimiville yrityksille. Tuloksien perusteella teemme johtopäätökset siitä, mitkä kuljetusmuotojen markkinaosuudet tulevat olemaan tulevaisuudessa sekä luomme kuvan kuljetusvirroista Euroopan, Venäjän, Etelä-Korea, Intian, Kiinan ja Japanin välillä. Samalla on tarkoitus ennakoida sitä, miten tarkastelun kohteena olevat yritykset aikovat kehittää kuljetuksiaan ja varastointiaan tulevien vuosien aikana. Tulosten perusteella näyttää siltä, että seuraavan viiden vuoden kuluessa kuljetuskustannukset eivät merkittävissä määrin tule muuttuman ja meri- sekä kumipyöräkuljetukset pysyvät suosituimpina vaihtoehtoina.Kuitenkin lentokuljetusten osuus laskee hiukan, kun taas rautatiekuljetusten painotus kasvaa. Tulokset paljastavat, että Kiinassa ja Venäjällä kuljetettava konttimäärä kasvaa; Intiassa tulos on saman suuntainen, joskaan ei niin voimakas. Analyysimme mukaan kuljetusvirtoihin liittyvä epätasapaino säilyy Venäjän kuljetusten suhteen: yritykset jatkavat tulevaisuudessakin vientiperusteista strategiaansa. Varastoinnin puolella tunnistamme pienemmän muutoksen, jonka mukaan pienikokoisten varastojen määrät todennäköisesti vähenevät tulevaisuudessa ja kiinnostus isoja varastoja kohtaan lisääntyy. Tässä kohtaa on mainittava, että suomalaisilla yrityksillä on enemmän varastoja Keski- ja Itä-Euroopassa verrattuna ruotsalaisiin toimijoihin, jotka keskittyvät selkeämmin Länsi-Euroopan maihin. Varastoja yrityksillä on molemmissa tapaukissa paljolti kotimaassaan. Valitessaan varastojensa sijoituskohteita yritykset painottavat seuraavia kriteereitä: alhaiset jakelukustannukset, kokoamispaikan/valmistustehtaan läheisyys, saapuvan logistiikan integroitavuus ja saatavilla olevat logistiikkapalvelut. Tutkimuksemme lopussa päädymme siihen, että varastojen sijoituspaikat eivät muutu satamien rakenteen ja liikenneyhteyksien takia kovinkaan nopeasti.

On the Analysis and Control of a Linear Synchronous Servomotor with a Flexible Load

Industry's growing need for higher productivity is placing new demands on mechanisms connected with electrical motors, because these can easily lead to vibration problems due to fast dynamics. Furthermore, the nonlinear effects caused by a motor frequently reduce servo stability, which diminishes the controller's ability to predict and maintain speed. Hence, the flexibility of a mechanism and its control has become an important area of research. The basic approach in control system engineering is to assume that the mechanism connected to a motor is rigid, so that vibrations in the tool mechanism, reel, gripper or any apparatus connected to the motor are not taken into account. This might reduce the ability of the machine system to carry out its assignment and shorten the lifetime of the equipment. Nonetheless, it is usually more important to know how the mechanism, or in other words the load on the motor, behaves. A nonlinear load control method for a permanent magnet linear synchronous motor is developed and implemented in the thesis. The purpose of the controller is to track a flexible load to the desired velocity reference as fast as possible and without awkward oscillations. The control method is based on an adaptive backstepping algorithm with its stability ensured by the Lyapunov stability theorem. As a reference controller for the backstepping method, a hybrid neural controller is introduced in which the linear motor itself is controlled by a conventional PI velocity controller and the vibration of the associated flexible mechanism is suppressed from an outer control loop using a compensation signal from a multilayer perceptron network. To avoid the local minimum problem entailed in neural networks, the initial weights are searched for offline by means of a differential evolution algorithm. The states of a mechanical system for controllers are estimated using the Kalman filter. The theoretical results obtained from the control design are validated with the lumped mass model for a mechanism. Generalization of the mechanism allows the methods derived here to be widely implemented in machine automation. The control algorithms are first designed in a specially introduced nonlinear simulation model and then implemented in the physical linear motor using a DSP (Digital Signal Processor) application. The measurements prove that both controllers are capable of suppressing vibration, but that the backstepping method is superior to others due to its accuracy of response and stability properties.

Microscopy of Fission Yeast Sexual Lifecycle.

The fission yeast Schizosaccharomyces pombe has been an invaluable model system in studying the regulation of the mitotic cell cycle progression, the mechanics of cell division and cell polarity. Furthermore, classical experiments on its sexual reproduction have yielded results pivotal to current understanding of DNA recombination and meiosis. More recent analysis of fission yeast mating has raised interesting questions on extrinsic stimuli response mechanisms, polarized cell growth and cell-cell fusion. To study these topics in detail we have developed a simple protocol for microscopy of the entire sexual lifecycle. The method described here is easily adjusted to study specific mating stages. Briefly, after being grown to exponential phase in a nitrogen-rich medium, cell cultures are shifted to a nitrogen-deprived medium for periods of time suited to the stage of the sexual lifecycle that will be explored. Cells are then mounted on custom, easily built agarose pad chambers for imaging. This approach allows cells to be monitored from the onset of mating to the final formation of spores.