Desenvolvimento e implantação de transferência de manufatura para terceiros: estudo de caso

A presente dissertação tem por objetivo investigar os aspectos do processo de terceirização da atividade industrial em suas diversas etapas. São estudadas todas as fases, iniciando-se pelo planejamento das atividades e segue com o estudo da viabilidade econômica, com o levantamento dos benefícios potenciais (identificados e separados). Identificação dos fornecedores potenciais, desenvolvimento dos produtos, aprovação dos produtos, estudo da estrutura de custo e do preço a ser praticado, finalizando com o início dos fornecimentos. Para tanto, foi realizado o estudo de um caso de terceirização da produção em uma indústria de produtos para iluminação. O objetivo desta terceirização foi otimizar a variedade dos produtos fabricados sem entretanto, alterar o portifólio dos produtos comercializados . Para tanto, decidiu-se por desenvolver novas fontes de fornecimento para os produtos com menor volume de produção e com maior complexidade em suas construções. A planta de produção da empresa "Alfa" está localizada no estado de Nuevo Leon no México e tem como objetivo fornecer produtos de iluminação (lâmpadas incandescentes e fluorescentes) para os países da área do NAFTA (México, Canadá e Estados Unidos). O trabalho foi conduzido por uma equipe multidisciplinar, operando em estrutura matricial, localizada em pontos geograficamente distintos em função da atividade requerida de cada um dos membros da equipe. O trabalho mostra que este processo é viável, mas que envolve um significativo grau de complexidade para que se possa obter os resultados finais alinhados com as expectativas das partes envolvidas no início do processo. Observa-se que o comprometimento da alta administração é fundamental para garantir os meios e alinhamento da equipecom as estratégias definidas, bem como suportar a aderência da atividade aos preceitos estabelecidos. Conclui-se que a estruturação deste processo pode garantir melhores resultados nos aspectos de custo dos produtos, tempo de realização do processo e qualidade dos produtos em conformidade com as especificações.(AU)

Análise da atividade cognitiva do operador de sala de controle da produção de controle da produção de petróleo on-shore: uma abordagem da ergonomia para a gestão das restrições do sistema sociotécnico

This master's thesis aims to analyze the activity of the operators in a control room of the processes of production on-shore petroleum, with a focus on sociotechnical restrictions that interfere in the decision-making process and the actions of operators and therefore, the strategies (individual and collective) to regulate and maintain the operator action required and the safety of the system, together. The activity in focus involves the supervision and control of the production of thousands of barrels of oil/day in a complex and dispersed production’s structures built in an extension of 80 km. This operational framework highlights the importance of this activity for the fulfilment of the targets local and corporate efficiency, good management of the environment, health and safety of operators. This is an exploratory research and in the field, which uses the methodology of Ergonomic Analysis of the Work, composed of observational techniques and interactional, having as locus control room of the processes of production on-shore oil of an oil company. The population of this research is formed by operators in the control room of an Brazilian oil company. The results showed that the supervisory activity and control of the superheated steam injection is an complex context, demands greater attention, concentration, calculations, comparisons, trend analysis and decision making. The activity is collectively constructed between the control room operator, field operator and the supplier of steam. The research showed that the processes of communication and collaboration between the control room , fields and support staff are the key elements of this activity. The study shows that the operators have the autonomy and the elements necessary for work; and that there is continuous investments to improve the technology used and that the operators report sleep disturbances as a result of chronic exposure to night work. The study contributed with proposals for transformation of this activity: with regard to the installation of a area reserved for food in control room, the update the screens of the supervisory current operating condition, the periodic visits by room operators in the field, standardization of production reports, development assistance and standardization of nomenclature of controlling stations steam systems, to improve the conditions of realization of the activity, improve the quality of products produced by operators and contribute to reduce the possibility of slips or shifts in the activity.

Análise das LER/DORT notificadas no Rio Grande do Norte de 2010 a 2014

The increasing prevalence of Repetitive Strain Injury / Work-Related Musculoskeletal Disorders (RSI / MSDs) has been explained by changes in the work that has been characterized by setting goals and productivity. This fact does not take into account the psycho-physiological characteristics of workers who become ill as a result of professional activities engaged in and also the adverse conditions in which his work was done. This study aimed to analyze the RSI / MSDs reported in the state of Rio Grande do Norte, Brazil, 2010-2014 compared to the profile of the population, epidemiological aspects and features of these diseases. It is a descriptive epidemiological cross-sectional study using secondary data obtained in the Notifiable Diseases Information System (SINAN) in May 2015 was used as the area covered by the Rio Grande do Norte. Data were collected regarding the grievances of work-related RSI / MSDs, assigned by the Worker's Health Reference Center (CEREST) of the State Health Department. Data were processed with the help of Microsoft Excel® 2013 and presented in tables in absolute frequency (n) and relative frequency (%). The results showed a total of 403 notifications of RSI / MSDs, where the vast majority 72% (290) was recorded in Natal. Regarding the profile of notified employees, 88.59% (357) have aged between 25 and 54 years, 62.78% (253) were female, and in relation to education, 31.51% (127) had high school complete. The most affected occupations were seamstresses (the clothing industry) with 24.97% (97), followed by masons, construction with 3.23% (13) and cashiers with 2.99% (12). About the work situation, 75.93% (306) had a formal contract, however, were sent to Communications Occupational accidents (CAT) only 67% (270) of the cases. Regarding the signs and symptoms, pain and limitation of movement were the most mentioned respectively with 98.01% (395) and 95.04% (383) of notifications. Notifications, 94.29% (380) showed exposure to repetitive movements in their workplace. The most frequent specific diagnoses were synovitis and tenosynovitis (CID F 65), with 30.02% (121) of notifications, followed by back pain (CID F 54) to 19.35% (78) and shoulder injuries (ICD M 75) with 15.88% (64). They were away from work 81.64% (329) of workers reported with RSI / MSDs. Evolution more prevalent among cases was temporary disability with 75.68% (305). It was concluded that the SINAN is a database of potential to characterize the profile of RSI / MSDs, requiring, however, an improvement in the coverage of records and data quality. In addition, this study reflects the need to implement protection strategies to workers by companies, signaling promotion, prevention and rehabilitation aimed at reducing these injuries and the improvement of occupational health indicators in Rio Grande do Norte.

Desenvolvimento de um sumo de fruta com adição da macroalga Gelidium corneum, recorrendo à tecnologia HPP: caracterização físico-química, microbiológica e sensorial

No setor alimentar, o controlo da qualidade dos produtos e dos processos é uma etapa essencial, uma vez que é por este meio que se avaliam os padrões exigidos, quer a nível de legislação, quer a nível de mercado. O presente trabalho teve, como objetivos principais, o desenvolvimento de um novo produto alimentar com adição de algas, bem como o controlo de qualidade a nível de uma unidade fabril de produção de sumos e polpas naturais, à base de hortofrutícolas. De forma a garantir a qualidade na obtenção de produtos, foi realizado, diariamente, o controlo de entradas dos produtos hortofrutícolas, o acompanhamento de processos nas linhas de produção da fábrica e a análise das amostras de referência. Considerando a tendência e potencial de crescimento apresentados pelo setor das bebidas, nomeadamente dos sumos de fruta naturais, juntamente com a incessante procura por ingredientes naturais ricos em vários nutrientes e com propriedades bioativas, tem-se vindo a registar o lançamento de um número considerável de bebidas inovadoras, onde as macroalgas têm merecido um papel de destaque. Desta forma, procedeu-se à elaboração de dois protótipos, nomeadamente, sumo de framboesa e sumo de espinafres, com a adição do extrato da alga Gelidium corneum, estabilizados através do processo de Hiperpressão a frio, com o intuito de se avaliar o impacto desse extrato nos diferentes parâmetros de qualidade dos sumos. No que respeita aos parâmetros físico-químicos, o pH e teor de sólidos solúveis (TSS) foram avaliados após produção (t0), no tempo intermédio (t15) e no tempo final (t30). A cor foi determinada no t0 e no t30 e os restantes parâmetros, como acidez titulável, quantificação total de polifenóis, capacidade de redução do radical DPPH, teor de proteína bruta, teor de cinzas, teor de minerais e oligoelementos e teor de vitaminas (A, B1, B2 e C) foram avaliados no tempo final (t30). Foram, também, avaliados os parâmetros microbiológicos mais significativos, nomeadamente, microrganismos totais a 30 ˚C, Escherichia coli, Salmonella spp, bolores e leveduras (ao t0, t15 e t30) e realizou-se uma avaliação sensorial ao 29.º dia após produção. Estes sumos apresentaram-se microbiologicamente estáveis, não se tendo verificado crescimento microbiológico durante o período de armazenamento de 30 dias. A análise dos resultados físico-químicos permitiram constatar que a adição do extrato da alga Gelidium corneum aos sumos influenciou as suas características, tendo havido um aumento significativo do pH com a consequente diminuição da acidez titulável e um aumento do teor de sólidos solúveis, em comparação com os sumos controlo. Em relação à avaliação da cor, no caso das amostras de sumos de framboesa, verificou-se que a adição do extrato de algas influenciou o parâmetro a*. No entanto, ambas as amostras permitiram a manutenção deste parâmetro, ao longo do tempo. Quanto ao parâmetro b*, as duas amostras de sumo com algas demonstraram uma evolução mais estável, em relação aos respetivos controlos. No que respeita ao teor em minerais, a adição do extrato da alga demonstrou aumentar os teores de magnésio, sódio, potássio e iodo. Em termos sensoriais, o sumo de framboesa com algas obteve maior aceitação por parte do painel de provadores, podendo-se constatar que o atributo da cor foi o que mostrou maiores variações, entre as duas amostras.

Fatores críticos de sucesso das empresas familiares: uma abordagem competitiva

The present objective study to inside identify the critical factors of success of the local family companies of a competitive boarding. For in such a way the same it understands the culture and the management of the family companies of success, identifies the essential areas of performance, it establishes the restrictive factors of the success, and analyzes the level of influence of the critical factors of success in the competitiveness of this type of company. In function of the subject little to be explored, and of this study to provide a general vision concerning the factors that take the family companies to get success, this research is explorer. On the other hand, for describing characteristic of the familiar companies in prominence in the local scene and for being worried about the practical performance, the same one also is descriptive. The sample in turn is the not-probabilist one of the intentional type, for accessibility. For operacionalization of the collection of data, the direct contact was used, being the composed instrument of research for variable as management, culture, critical factors of success and competitiveness. The study it evidences that in regards to the management and the culture of the family companies of success, some variable are turned aside from the standard of the conventional family companies cited by literature. Of general form in the familiar companies of success it has a bigger level of professionalization of the management. As for the value given to the knowledge, the study sample that the conventional family companies give little importance to it, in contrast of the family companies in prominence, who value of significant form the search for the knowledge. He is demonstrated despite the family companies of success, even so total are not professionalized, possess a bigger level of professionalization of the management, ratifying of certain forms the reason for which the majority develops the Strategical Planning formal periodically. In short, the results point 17 critical factors of success with respect to the family companies, in special factors as the product quality and services, and the use of the technology

Diagnóstico e melhoria da eficiência energética da empresa Atlanta Steps

Inserida no setor do calçado, a Atlanta Steps é uma empresa que dedica a sua atividade maioritariamente à produção de solas para calçado. No decorrer da sua atividade produtiva existe potência calorífica libertada pelas máquinas que é necessário retirar para o exterior. Para o efeito, a empresa dispõe de um sistema de refrigeração das máquinas que opera de forma pouco eficiente, sobretudo em dias típicos de verão. É objetivo da presente dissertação efetuar um diagnóstico energético ao sistema de refrigeração da empresa por forma a avaliar: a potência calorifica libertada por cada máquina, a potência de refrigeração instalada, e o padrão de utilização de cada máquina, entre outros fatores. Com base no diagnóstico realizado são apresentadas propostas de melhoria que visam aumentar a eficiência energética do sistema e diminuir custos associados à refrigeração das máquinas, bem como melhorar a qualidade dos produtos da Atlanta Steps.

Guia de análises microbiológicas para cortes de aves in natura: elaboração e aplicação prática

An effective hygiene and sanitation inspection of meat and meat products is essential for its production and commercialization. For this reason, the national and international standards responsible for these products quality control employs microbiological analyses methods as quality control tools. In December of 2012, it was included in the Ministério da Agricultura Pecuária e Abastecimento (MAPA) website, a Microbiological Scope of food and water, which presents the replacement of some methods proposed by the Normative Instruction 62. Some of these methodologies are considered rapid, practical and convenient. However, other methodologies were still replaced by conventional ones, which presents disadvantages as incorrect interpretations of the microorganism phenotypical and biochemical characteristics, leading to the misinterpretation of test results. Therefore, the objective of this study is to develop a comprehensive, practical and illustrative guidebook of microbiological analysis for in natura poultry cuts. The methods addressed in this guide are the official standards analysis required by the poultry cuts legislation, which are the Escherichia coli count, the thermotolerant coliforms count, the aerobic plate count and the detection of Salmonella spp. The approached methodologies for these analysis will be the AOAC 998.08, the Normative Instruction 62 and the ISO 4833-1:2013 and ISO 6579:2002, respectively. In these events, it is expected to obtain an enlightening and approved guidebook evaluated by laboratory technicians, which will help reduce the analytical subjectivity leading to a more reliable interpretation of the test results.

Estudo da secagem da flor de cardo e análise de polissacarídeos e composto fenólicos

A qualidade dos produtos alimentares e a sua influência sobre a nutrição e a saúde humana tem vindo a merecer um lugar de destaque na comunidade científica. O conceito de alimento funcional tem adquirido grande importância hoje em dia, em particular os alimentos com compostos bioactivos. O Cardo (Cynara cardunculus L.) é uma planta herbácea originária da região mediterrânea usada essencialmente na coagulação do leite, e por muitos considerada um medicamento popular, devido aos seus efeitos terapêuticos. Este trabalho teve como objectivo estudar o efeito de diferentes condições de secagem da flor de cardo, na composição em ácidos fenólicos, bem como em polissacarídeos. Era ainda objectivo tentar identificar possíveis compostos que pudessem ser utilizados como marcadores de autenticidade do queijo da serra. Neste trabalho foi usada uma amostra de flor de cardo liofilizado e três amostras secadas, a diferentes temperaturas (40, 50 e 60ºC). A análise do resíduo sólido da flor do cardo, por cromatografia gasosa, permitiu identificar a presença de açúcares constituintes de polissacarídeos pécticos. A análise por HPLC, dos extratos metanólicos e cetónicos, revelaram a presença de ácidos hidroxibenzóicos e hidroxicinâmicos na flor do cardo. A amostra mais rica nestes compostos foi a amostra secada a 50ºC. O aumento da temperatura de secagem originou uma diminuição de ácidos fenólicos.

Fatores críticos de sucesso das empresas familiares: uma abordagem competitiva

The present objective study to inside identify the critical factors of success of the local family companies of a competitive boarding. For in such a way the same it understands the culture and the management of the family companies of success, identifies the essential areas of performance, it establishes the restrictive factors of the success, and analyzes the level of influence of the critical factors of success in the competitiveness of this type of company. In function of the subject little to be explored, and of this study to provide a general vision concerning the factors that take the family companies to get success, this research is explorer. On the other hand, for describing characteristic of the familiar companies in prominence in the local scene and for being worried about the practical performance, the same one also is descriptive. The sample in turn is the not-probabilist one of the intentional type, for accessibility. For operacionalization of the collection of data, the direct contact was used, being the composed instrument of research for variable as management, culture, critical factors of success and competitiveness. The study it evidences that in regards to the management and the culture of the family companies of success, some variable are turned aside from the standard of the conventional family companies cited by literature. Of general form in the familiar companies of success it has a bigger level of professionalization of the management. As for the value given to the knowledge, the study sample that the conventional family companies give little importance to it, in contrast of the family companies in prominence, who value of significant form the search for the knowledge. He is demonstrated despite the family companies of success, even so total are not professionalized, possess a bigger level of professionalization of the management, ratifying of certain forms the reason for which the majority develops the Strategical Planning formal periodically. In short, the results point 17 critical factors of success with respect to the family companies, in special factors as the product quality and services, and the use of the technology

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Huambo Microbiology Laboratory : economical and financial viability

Mestrado em Finanças

Sensometrics: a análise sensorial de bebidas numa perspetiva estatística

Conferência plenária apresentada em 20 de Maio de 2016 no Fórum ALABE 2016

Preparação e caracterização de catalisadores à base de titânio suportado em MCM-41 para produção de compostos oxigenados através da pirólise catalítica do capim elefante

In recent years, the area of advanced materials has been considerably, especially when it comes to materials for industrial use, such as is the case with structured porosity of catalysts suitable for catalytic processes. The use of catalysts combined with the fast pyrolysis process is an alternative to the oxygenate production of high added value, because, in addition to increasing the yield and quality of products, allows you to manipulate the selectivity to a product of interest, and therefore allows greater control over the characteristics of the final product. Based on these arguments, in this work were prepared titanium catalysts supported on MCM-41 for use in catalytic pyrolysis of biomass, called elephant grass. The reactions of pyrolysis of biomass were performed in a micro pyrolyzer, Py-5200, coupled to GC / MS, the company CDS Corporation, headquartered in the United States. The catalysts Ti-MCM-41 in different molar ratios were characterized by XRD, TG / DTG, FT-IR, SEM, XRF, UV-visible adsorption of nitrogen and the distribution of particle diameter and specific surface area measurement by the BET method. From the catalytic tests it was observed that the catalysts synthesized showed good results for the pyrolysis reaction.The main products were obtained a higher yield of aldehydes, ketones and furan. It was observed that the best reactivity is a direct function of the ratio Si/Ti, nature and concentration of the active species on mesoporous supports. Among the catalysts Ti-MCM-41 (molar ratio Si / Ti = 25 and 50), the ratio Si / Ti = 25 (400 ° C and 600 ° C) favored the cracking of oxygenates such as acids , aldehydes, ketones, furans and esters. Already the sample ratio Si / Ti = 50 had the highest yield of aromatic oxygenates

Reconfiguração dinâmica de estratégias distribuídas em dispositivos foundation fieldbus para a otimização de processos na indústria do petróleo

The petrochemical industry has as objective obtain, from crude oil, some products with a higher commercial value and a bigger industrial utility for energy purposes. These industrial processes are complex, commonly operating with large production volume and in restricted operation conditions. The operation control in optimized and stable conditions is important to keep obtained products quality and the industrial plant safety. Currently, industrial network has been attained evidence when there is a need to make the process control in a distributed way. The Foundation Fieldbus protocol for industrial network, for its interoperability feature and its user interface organized in simple configuration blocks, has great notoriety among industrial automation network group. This present work puts together some benefits brought by industrial network technology to petrochemical industrial processes inherent complexity. For this, a dynamic reconfiguration system for intelligent strategies (artificial neural networks, for example) based on the protocol user application layer is proposed which might allow different applications use in a particular process, without operators intervention and with necessary guarantees for the proper plant functioning

Pirólise rápida catalítica do capim elefante utilizando materiais mesoporosos e óxidos metálicos para deoxigenação em bio-óleo

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc