An approach for linking score and audio recordings in Makam music of Turkey

The main information sources to study a particular piece of music are symbolic scores and audio recordings. These are complementary representations of the piece and it isvery useful to have a proper linking between the two of the musically meaningful events. For the case of makam music of Turkey, linking the available scores with the correspondingaudio recordings requires taking the specificities of this music into account, such as the particular tunings, the extensive usage of non-notated expressive elements, and the way in which the performer repeats fragmentsof the score. Moreover, for most of the pieces of the classical repertoire, there is no score written by the original composer. In this paper, we propose a methodology to pair sections of a score to the corresponding fragments of audio recording performances. The pitch information obtained from both sources is used as the common representationto be paired. From an audio recording, fundamental frequency estimation and tuning analysis is done to compute a pitch contour. From the corresponding score, symbolic note names and durations are converted to a syntheticpitch contour. Then, a linking operation is performed between these pitch contours in order to find the best correspondences.The method is tested on a dataset of 11 compositions spanning 44 audio recordings, which are mostly monophonic. An F3-score of 82% and 89% are obtained with automatic and semi-automatic karar detection respectively,showing that the methodology may give us a needed tool for further computational tasks such as form analysis, audio-score alignment and makam recognition.

Higher order Lagrangian systems: Geometric structures, Dynamics, and Constraints

In order to study the connections between Lagrangian and Hamiltonian formalisms constructed from aperhaps singularhigher-order Lagrangian, some geometric structures are constructed. Intermediate spaces between those of Lagrangian and Hamiltonian formalisms, partial Ostrogradskiis transformations and unambiguous evolution operators connecting these spaces are intrinsically defined, and some of their properties studied. Equations of motion, constraints, and arbitrary functions of Lagrangian and Hamiltonian formalisms are thoroughly studied. In particular, all the Lagrangian constraints are obtained from the Hamiltonian ones. Once the gauge transformations are taken into account, the true number of degrees of freedom is obtained, both in the Lagrangian and Hamiltonian formalisms, and also in all the intermediate formalisms herein defined.

Numerical and ExperimentalModelling of Gas Flow and Heat Transfer in the Air Gap of An Electric Machine

This work deals with the cooling of high-speed electric machines, such as motors and generators, through an air gap. It consists of numerical and experimental modelling of gas flow and heat transfer in an annular channel. Velocity and temperature profiles are modelled in the air gap of a high-speed testmachine. Local and mean heat transfer coefficients and total friction coefficients are attained for a smooth rotor-stator combination at a large velocity range. The aim is to solve the heat transfer numerically and experimentally. The FINFLO software, developed at Helsinki University of Technology, has been used in the flow solution, and the commercial IGG and Field view programs for the grid generation and post processing. The annular channel is discretized as a sector mesh. Calculation is performed with constant mass flow rate on six rotational speeds. The effect of turbulence is calculated using three turbulence models. The friction coefficient and velocity factor are attained via total friction power. The first part of experimental section consists of finding the proper sensors and calibrating them in a straight pipe. After preliminary tests, a RdF-sensor is glued on the walls of stator and rotor surfaces. Telemetry is needed to be able to measure the heat transfer coefficients at the rotor. The mean heat transfer coefficients are measured in a test machine on four cooling air mass flow rates at a wide Couette Reynolds number range. The calculated values concerning the friction and heat transfer coefficients are compared with measured and semi-empirical data. Heat is transferred from the hotter stator and rotor surfaces to the coolerair flow in the air gap, not from the rotor to the stator via the air gap, althought the stator temperature is lower than the rotor temperature. The calculatedfriction coefficients fits well with the semi-empirical equations and precedingmeasurements. On constant mass flow rate the rotor heat transfer coefficient attains a saturation point at a higher rotational speed, while the heat transfer coefficient of the stator grows uniformly. The magnitudes of the heat transfer coefficients are almost constant with different turbulence models. The calibrationof sensors in a straight pipe is only an advisory step in the selection process. Telemetry is tested in the pipe conditions and compared to the same measurements with a plain sensor. The magnitudes of the measured data and the data from the semi-empirical equation are higher for the heat transfer coefficients than thenumerical data considered on the velocity range. Friction and heat transfer coefficients are presented in a large velocity range in the report. The goals are reached acceptably using numerical and experimental research. The next challenge is to achieve results for grooved stator-rotor combinations. The work contains also results for an air gap with a grooved stator with 36 slots. The velocity field by the numerical method does not match in every respect the estimated flow mode. The absence of secondary Taylor vortices is evident when using time averagednumerical simulation.

Experimental and Numerical Analysis of Different Volutes in a Centrifugal Compressor

In a centrifugal compressor the flow around the diffuser is collected and led to the pipe system by a spiral-shaped volute. In this study a single-stage centrifugal compressor with three different volutes is investigated. The compressorwas first equipped with the original volute, the cross-section of which was a combination of a rectangle and semi-circle. Next a new volute with a fully circular cross-section was designed and manufactured. Finally, the circular volute wasmodified by rounding the tongue and smoothing the tongue area. The overall performance of the compressor as well as the static pressure distribution after the impeller and on the volute surface were measured. The flow entering the volute was measured using a three-hole Cobra-probe, and flow visualisations were carriedout in the exit cone of the volute. In addition, the radial force acting on theimpeller was measured using magnetic bearings. The complete compressor with thecircular volute (inlet pipe, full impeller, diffuser, volute and outlet pipe) was also modelled using computational fluid dynamics (CFD). A fully 3-D viscous flow was solved using a Navier-Stokes solver, Finflo, developed at Helsinki University of Technology. Chien's k-e model was used to take account of the turbulence. The differences observed in the performance of the different volutes were quite small. The biggest differences were at low speeds and high volume flows,i.e. when the flow entered the volute most radially. In this operating regime the efficiency of the compressor with the modified circular volute was about two percentage points higher than with the other volutes. Also, according to the Cobra-probe measurements and flow visualisations, the modified circular volute performed better than the other volutes in this operating area. The circumferential static pressure distribution in the volute showed increases at low flow, constant distribution at the design flow and decrease at high flow. The non-uniform static pressure distribution of the volute was transmitted backwards across the vaneless diffuser and observed at the impeller exit. At low volume flow a strong two-wave pattern developed into the static pressure distribution at the impeller exit due to the response of the impeller to the non-uniformity of pressure. The radial force of the impeller was the greatest at the choke limit, the smallest atthe design flow, and moderate at low flow. At low flow the force increase was quite mild, whereas the increase at high flow was rapid. Thus, the non-uniformityof pressure and the force related to it are strong especially at high flow. Theforce caused by the modified circular volute was weaker at choke and more symmetric as a function of the volume flow than the force caused by the other volutes.

Sex-chromosome differentiation and 'sex races' in the common frog (Rana temporaria).

Sex-chromosome differentiation was recently shown to vary among common frog populations in Fennoscandia, suggesting a trend of increased differentiation with latitude. By rearing families from two contrasted populations (respectively, from northern and southern Sweden), we show this disparity to stem from differences in sex-determination mechanisms rather than in XY-recombination patterns. Offspring from the northern population display equal sex ratios at metamorphosis, with phenotypic sexes that correlate strongly with paternal LG2 haplotypes (the sex chromosome); accordingly, Y haplotypes are markedly differentiated, with male-specific alleles and depressed diversity testifying to their smaller effective population size. In the southern population, by contrast, a majority of juveniles present ovaries at metamorphosis; only later in development do sex ratios return to equilibrium. Even at these later stages, phenotypic sexes correlate only mildly with paternal LG2 haplotypes; accordingly, there are no recognizable Y haplotypes. These distinct patterns of gonadal development fit the concept of 'sex races' proposed in the 1930s, with our two populations assigned to the 'differentiated' and 'semi-differentiated' races, respectively. Our results support the suggestion that 'sex races' differ in the genetic versus epigenetic components of sex determination. Analysing populations from the 'undifferentiated race' with high-density genetic maps should help to further test this hypothesis.

Nursing student-patient relationship and associated factors

The purpose of this study was to analyse the nursing student-patient relationship and factors associated with this relationship from the point of view of both students and patients, and to identify factors that predict the type of relationship. The ultimate goal is to improve supervised clinical practicum with a view to supporting students in their reciprocal collaborative relationships with patients, increase their preparedness to meet patients’ health needs, and thus to enhance the quality of patient care. The study was divided into two phases. In the first phase (1999-2005), a literature review concerning the student-patient relationship was conducted (n=104 articles) and semi-structured interviews carried out with nursing students (n=30) and internal medicine patients (n=30). Data analysis was by means of qualitative content analysis and Student-Patient Relationship Scales, which were specially developed for this research. In the second phase (2005-2007), the data were collected by SPR scales among nursing students (n=290) and internal medicine patients (n=242). The data were analysed statistically by SPSS 12.0 software. The results revealed three types of student-patient relationship: a mechanistic relationship focusing on the student’s learning needs; an authoritative relationship focusing on what the student assumes is in the patient’s best interest; and a facilitative relationship focusing on the common good of both student and patient. Students viewed their relationship with patients more often as facilitative and authoritative than mechanistic, while in patients’ assessments the authoritative relationship occurred most frequently and the facilitative relationship least frequently. Furthermore, students’ and patients’ views on their relationships differed significantly. A number of background factors, contextual factors and consequences of the relationship were found to be associated with the type of relationship. In the student data, factors that predicted the type of relationship were age, current year of study and support received in the relationship with patient. The higher the student’s age, the more likely the relationship with the patient was facilitative. Fourth year studies and the support of a person other than a supervisor were significantly associated with an authoritative relationship. Among patients, several factors were found to predict the type of nursing student-patient relationships. Significant factors associated with a facilitative relationship were university-level education, several previous hospitalizations, admission to hospital for a medical problem, experience of caring for an ill family member and patient’s positive perception of atmosphere during collaboration and of student’s personal and professional growth. In patients, positive perceptions of student’s personal and professional attributes and patient’s improved health and a greater commitment to self-care, on the other hand, were significantly associated with an authoritative relationship, whereas positive perceptions of one’s own attributes as a patient were significantly associated with a mechanistic relationship. It is recommended that further research on the student-patient relationship and related factors should focus on questions of content, methodology and education.

Micronization of Pharmaceuticals and Food Ingredients using Supercritical Fluid Techniques

Micronization techniques based on supercritical fluids (SCFs) are promising for the production of particles with controlled size and distribution. The interest of the pharmaceutical field in the development of SCF techniques is increasing due to the need for clean processes, reduced consumption of energy, and to their several possible applications. The food field is still far from the application of SCF micronization techniques, but there is increasing interest mainly for the processing of products with high added value. The aim of this study is to use SCF micronization techniques for the production of particles of pharmaceuticals and food ingredients with controlled particle size and morphology, and to look at their production on semi-industrial scale. The results obtained are also used to understand the processes from the perspective of broader application within the pharmaceutical and food industries. Certain pharmaceuticals, a biopolymer and a food ingredient have been tested using supercritical antisolvent micronization (SAS) or supercritical assisted atomization (SAA) techniques. The reproducibility of the SAS technique has been studied using physically different apparatuses and on both laboratory and semi-industrial scale. Moreover, a comparison between semi-continuous and batch mode has been performed. The behaviour of the system during the SAS process has been observed using a windowed precipitation vessel. The micronized powders have been characterized by particle size and distribution, morphology and crystallinity. Several analyses have been performed to verify if the SCF process modified the structure of the compound or caused degradation or contamination of the product. The different powder morphologies obtained have been linked to the position of the process operating point with respect to the vapour-liquid equilibrium (VLE) of the systems studied, that is, mainly to the position of the mixture critical point (MCP) of the mixture. Spherical micro, submicro- and nanoparticles, expanded microparticles (balloons) and crystals were obtained by SAS. The obtained particles were amorphous or with different degrees of crystallinity and, in some cases, had different pseudo-polymorphic or polymorphic forms. A compound that could not be processed using SAS was micronized by SAA, and amorphous particles were obtained, stable in vials at room temperature. The SCF micronization techniques studied proved to be effective and versatile for the production of particles for several uses. Furthermore, the findings of this study and the acquired knowledge of the proposed processes can allow a more conscious application of SCF techniques to obtain products with the desired characteristics and enable the use of their principles for broader applications.

BUSINESS CONCEPTS OF MOBILE VALUE-ADDED SERVICES FROM OPERATOR’S POINT OF VIEW

Tämä diplomityö on tehty Lappeenrannassa Telecom Business Research Centerin 5T-projektiin liittyen. Työssä tutkitaan matkaviestinnän lisäarvopalveluiden liiketoimintakonsepteja operaattoreiden näkökulmasta. Lisäarvopalvelut laajentavat operaattoreiden palveluvalikoimaa. Niiden osuuden telekommunikaatioalan yritysten ja erityisesti operaattoreiden tuotoista on ennustettu kasvavan huomattavasti. Työn tärkeimpänä tavoitteena on tuoda uusia näkökulmia ja lisätä ymmärrystä lisäarvopalveluiden liiketoimintakonseptin rakentamisprosessista. Tätä tietämystä käytetään edesauttamaan työn empiirisessä osuudessa tutkitun Content Gateway -tuotteen liiketoimintaa. Tarjoamalla nopean liitynnän ja laskutuskanavan ulkopuolisten palveluntarjoajien ja operaattorin välille tämä tuote mahdollistaa operaattorille ja palveluntarjoajille lisäarvopalveluiden liiketoiminnan käynnistämisen. Lisäarvopalveluiden arvonluontiprosessi vaatii lukuisia yhteistyötä tekeviä osapuolia, joiden yhteistoiminta on dynaamista ja tiedonvälitys avointa, interaktiivista ja nopeaa. Arvonluontiin liittyy myös monia konvergoituvia kehityssuuntia. Perinteinen arvoketjuajattelu on riittämätön uuteen, verkottuneeseen toimintaympäristöön ja sen tilalle on tullut modernimpi arvoverkostomalli. Arvoverkosto luo kilpailuetunsa muita verkostoja vastaan jakamalla resurssit ja kompetenssit optimaalisesti ja liittämällä strategisen ja operationaalisen johtamisen kulttuurit toisiinsa. Tässä työssä verrataan arvoverkoston teoreettisia tavoitteita kahteen lisäarvopalveluiden liiketoimintakonseptiin. Näistä ensimmäinen, i-mode –niminen konsepti on valittu vertailuun edistyksellisyytensä ja tulevaa kehitystä ennakoivien ominaispiirteidensä vuoksi. Toinen esimerkkikonsepti on rakennettu edellä mainitun Content Gateway -tuotteen ympärille. Tutkimus sisältää mm. liikekumppaneiden hankinnan, ansaintalogiikoiden ja verkostojen johtamisen analysoinnin. Työn tuloksena on saatu ohjeita siihen, miten operaattori voi rakentaa tällaista konseptia ja mitä seikkoja tulee ottaa huomioon erityisesti sanomapalveluihin liittyvässä liiketoiminnassa.

Logistic Solutions of Imported Renovation Materials

Tämän diplomityön tavoitteena oli tutkia saneeraus- ja remontoimistuotteiden osalta maahantuontia Suomeen ja transitoliikennettä Suomen kautta Venäjälle. Lähtökohtana oli Suomen logistinen asema ja mahdolliset kilpailukykyyn vaikuttavat tekijät, joista on luotu potentiaalisia tulevaisuuden kuvia. Kaikki tulokset johdettiin LOADER/CLIENT –tutkimusprojektin yhteyksistä. Tutkimuksen tavoitteisiin päästiin empiiristä tutkimusta varten kootun teorian kautta, joka koostuu toimitusketjun hallinnasta ja tämänhetkisestä parhaimmasta käytännöstä eli ns. kolmen A:n menetelmästä. Lisäksi teoriaosuudessa tarkasteltiin toimitusketjun yritysten välisiä suhteita, kansainväliseen toimitusketjuun liittyviä tekijöitä sekä tulevaisuuden haasteita. Työn empiiristä tutkimustietoa kerättiin pääasiassa haastattelujen, mutta myös muiden tutkimuksen tuloksien kautta. Tutkimusmenetelmä oli laadullinen puolistrukturoitu teemahaastattelu, jota varten ryhmä remontoimiseen ja saneeraukseen liittyviä yrityksiä ja heidän käyttämiä logistisia operaattoreita sekä projektin johtoryhmää haastateltiin. Tutkimuksen tulosten mukaan suurin osa haastatelluista yrityksistä näkee Suomen logistisen aseman hyvänä tällä hetkellä ja lähivuosina. Etenkin arvotavaroiden transito- kuljetuksissa Suomen asema nähdään vahvana vuosien kokemuksen ansiosta. Tällä hetkellä arvotavaroiden toimitusaika ja kokonaiskustannukset varastoimisineen ja käsittelyineen ovat vastaavia tai jopa edullisempia verrattuna esimerkiksi reitteihin Baltian maiden kautta. Baltian maiden kehitys voi heikentää Suomen kilpailukykyä hetkellisesti, mutta todennäköisesti ei pidemmällä aikavälillä. Haastateltujen henkilöiden mielestä Suomen logistiseen kilpailukykyyn tulevaisuudessa vaikuttaa eniten kaksi kriittistä tekijää. Suomen tulisi ensinnäkin keskittyä ja kehittää arvotavaran transitokuljetuksia. Toiseksi, säilyttääkseen kilpailukykynsä, Suomen satamien palveluiden kuten tullin ja ahtaajien tulisi olla joustavasti käytettävissä 24 tuntia vuorokaudessa vuoden jokaisena päivänä.

Intercultural business communication between Arabs of the United Arab Emirates and Finns

Kun kauppaa käydään eri maanosien välillä, törmätään vieraisiin kulttuureihin ja erilaisiin kaupankäyntitapoihin. Tämä tutkimus keskittyy suomalaisten liikemiesten ja - naisten työhön Yhdistyneissä Arabiemiraateissa kulttuurierojen näkökulmasta. Tavoitteena on kuvata kulttuurierojen vaikutuksia kaupankäyntiprosessiin ja löytää niitä ongelmia, joita tämän prosessin aikana kohdataan. Tavoitteena on tuottaa tietoa, jonka avulla kulttuurieroista johtuvia ongelmia voidaan vähentää tulevaisuudessa. Tutkimuksen teoreettinen tausta perustuu Hofsteden kulttuurista vaihtelua kuvaaviin dimensioihin ja Ting Toomeyn kulttuurisen identiteetin neuvotteluprosessin malliin. Näihin malleihin perustuen luotiin tähän tutkimukseen oma kulttuurien välisen kohtaamisen malli. Tutkimusongelmia ovat: 1) Miten suomalaiset liikemiehet kuvailevat arabien kaupantekokulttuuria? Kuinka vastapuoli kuvailee omaa kaupantekokulttuuriaan? 2) Minkälainen on suomalaisten ja arabien välinen kaupankäyntiprosessi? 3) Minkälaisia ongelmia kohdataan tehtäessä kauppaa suomalaisten ja arabien kesken? Tutkimus on etnografinen, laadullinen haastattelututkimus (n=12). Haastattelut tehtiin suurimmaksi osaksi Yhdistyneissä Arabiemiraateissa, osin Suomessa. Erilainen kulttuuritausta näkyy kaupankäynnissä. Kollektivistinen, maskuliininen, islamilaisen uskontoon ja vain vähäisessä määrin suoraan kielelliseen koodistoon perustuva kulttuuri heijastuu kaupankäyntiprosessiin. Ystävyyden ja sukulaisten sekä muiden verkostojen merkitys korostuu. Ruumiin kieleen, ilmeisiin ja eleisiin liittyvä kommunikaatio on erilaista ja voi aiheuttaa väärinkäsityksiä. Myös aikakäsitys ja sopimuskäytäntö poikkeavat suomalaisesta. Kaikki nämä voivat aiheuttaa ongelmia kaupankäyntiprosessissa. Tärkeimmiksi tekijöiksi ongelmien kohtaamisessa nousivat ammattitaidon lisäksi kärsivällisyys ja joustavuus. Ongelmia voidaan vähentää huolellisella valmistautumisella ennen ulkomaille lähtöä. Toinen tapa on jatkuviin työkokemuksiin perustuen oppia paikallista kulttuuria ja sen piirteitä.

Brief cognitive assessment instruments in schizophrenia and bipolar patients, and healthy control subjects: A comparison study between the Brief Cognitive Assessment Tool for Schizophrenia (B-CATS) and the Screen for Cognitive Impairment in Psychiatry (SCIP)

Cognitive impairment in schizophrenia and psychosis is ubiquitous and acknowledged as a core feature of clinical expression, pathophysiology, and prediction of functioning. However, assessment of cognitive functioning is excessively time-consuming in routine practice, and brief cognitive instruments specific to psychosis would be of value. Two screening tools have recently been created to address this issue, i.e., the Brief Cognitive Assessment Tool for Schizophrenia (B-CATS) and the Screen for Cognitive Impairment in Psychiatry (SCIP). The aim of this research was to examine the comparative validity of these two brief instruments in relation to a global cognitive score. 161 patients with psychosis (96 patients diagnosed with schizophrenia and 65 patients diagnosed with bipolar disorder) and 76 healthy control subjects were tested with both instruments to examine their concurrent validity relative to a more comprehensive neuropsychological assessment battery. Scores from the B-CATS and the SCIP were highly correlated in the three diagnostic groups, and both scales showed good to excellent concurrent validity relative to a Global Cognitive Composite Score (GCCS) derived from the more comprehensive examination. The SCIP-S showed better predictive value of global cognitive impairment than the B-CATS. Partial and semi-partial correlations showed slightly higher percentages of both shared and unique variance between the SCIP-S and the GCCS than between the B-CATS and the GCCS. Brief instruments for assessing cognition in schizophrenia and bipolar disorders, such as the SCIP-S and B-CATS, seem to be reliable and promising tools for use in routine clinical practice.

Organic carbon and nutrient (P, N) concentrations of water and sediment in several aquatic environment types of a Mediterranean coastal wetland (Empordà Wetlands, NE Iberian Peninsula)

Total sediment and water organic carbon and nutrient (nitrogen and phosphorus) concentrations of different environment types of a Mediterranean coastal wetland (temporary and brackish, temporary and freshwater, semi-permanent and brackish, and permanent and brackish basins) were analysed during two hydroperiods. A nitrogen limitation was found for both sediment and water. The total organic carbon concentration of the water was significantly related to the water level, which varies throughout the hydroperiods. In contrast, the total organic carbon concentration of the sediment was not related to water level. However, significant differences in total organic carbon of the sediment were found between hydroperiods. On the other hand, total organic carbon of the sediment varied spatially, being higher in temporary brackish basins with lower sand content, and lower in permanent and semi-permanent brackish basins with higher sand content

DI-HIDROCUCURBITACINA B: SEMI-SÍNTESE DE NOVOS DERIVADOS GLICOSILADOS

In the last ten years, the interest in natural and semi-synthetic cucurbitacin derivatives has increased, primarily due their cytotoxic and anti-tumoral activities. However, the isolation of glycosylated cucurbitacins has been difficult due the presence of β-glucosidase enzyme. With the aim of obtaining new glycosylated derivatives, the glycosylation of dihydrocucurbitacin B under Köenigs-Knorr and imidate reaction conditions was studied. Novel glycoside derivatives 16-(1,2-orthoacetate-3,4,6-tri-O-acetyl-α-D-glucopyranosyl)-dihydrocucurbitacin B (2), 2-O-β-D-2,3,4,6-tetra-O-acetyl-galactopyranosyl dihydrocucurbitacin B (3) and 2-O-β-D-galactopyranosyl dihydrocucurbitacin B (4) were synthesized for the first time in 17% (2 and 3) and 48% (4) yields.

Analysis of the structural and electronic properties of 1-(5-Hydroxymethyl - 4 -[ 5 - (5-oxo-5-piperidin-1-yl-penta-1,3dienyl)-benzo[1,3]dioxol-2-yl] -tetrahydro-furan-2-yl)-5-methyl-1H-pyrimidine-2,4dione molecule

The structural and electronic properties of 1-(5-Hydroxymethyl - 4 -[ 5 - (5-oxo-5-piperidin- 1 -yl-penta- 1,3 -dienyl)-benzo [1,3] dioxol- 2 -yl]-tetrahydro -furan-2 -yl)-5-methy l-1Hpyrimidine-2,4dione (AHE) molecule have been investigated theoretically by performing density functional theory (DFT), and semi empirical molecular orbital calculations. The geometry of the molecule is optimized at the level of Austin Model 1 (AM1), and the electronic properties and relative energies of the molecules have been calculated by density functional theory in the ground state. The resultant dipole moment of the AHE molecule is about 2.6 and 2.3 Debyes by AM1 and DFT methods respectively, This property of AHE makes it an active molecule with its environment, that is AHE molecule may interacts with its environment strongly in solution.

Modelling of combustion and sorbent reactions in three-dimensional flow environment of a circulating fluidized bed furnace

This thesis presents a three-dimensional, semi-empirical, steady state model for simulating the combustion, gasification, and formation of emissions in circulating fluidized bed (CFB) processes. In a large-scale CFB furnace, the local feeding of fuel, air, and other input materials, as well as the limited mixing rate of different reactants produce inhomogeneous process conditions. To simulate the real conditions, the furnace should be modelled three-dimensionally or the three-dimensional effects should be taken into account. The only available methods for simulating the large CFB furnaces three-dimensionally are semi-empirical models, which apply a relatively coarse calculation mesh and a combination of fundamental conservation equations, theoretical models and empirical correlations. The number of such models is extremely small. The main objective of this work was to achieve a model which can be applied to calculating industrial scale CFB boilers and which can simulate all the essential sub-phenomena: fluid dynamics, reactions, the attrition of particles, and heat transfer. The core of the work was to develop the model frame and the required sub-models for determining the combustion and sorbent reactions. The objective was reached, and the developed model was successfully used for studying various industrial scale CFB boilers combusting different types of fuel. The model for sorbent reactions, which includes the main reactions for calcitic limestones, was applied for studying the new possible phenomena occurring in the oxygen-fired combustion. The presented combustion and sorbent models and principles can be utilized in other model approaches as well, including other empirical and semi-empirical model approaches, and CFD based simulations. The main achievement is the overall model frame which can be utilized for the further development and testing of new sub-models and theories, and for concentrating the knowledge gathered from the experimental work carried out at bench scale, pilot scale and industrial scale apparatus, and from the computational work performed by other modelling methods.