The Process of Greening Cycle as Method of Operative Environmental

The structural change of society from product-based business to service- and further to need-based business has caused the fact that work for environmental issues has spread from conventional factories and environmentally harmful production to concern services and offices as well. Almost every company has an office, so a relatively small environmental burden caused by an individual office grows remarkable already at the state level and globally even more. Motivation to work for environmental issues in an individual office could be challenging even without the fact that wasted environmental impacts bound also wasted costs. Besides cost savings, a concretely greener image of a company has its value in the B2Cas well as in the B2B-field. Consumers and clients are more and more conscious of environmental issues and demand concrete actions instead of speeches, good thoughts and meaningless certifications. Internal work for environmental issues at a strategy level is not sufficient, so operational environmental management is needed for changing old practices. This research is about the effects of operative environmental management on the greening process of an office-based business. The research is outlined to concern the operative work in the office including field sales. Target was to concretely lower the environmental impacts of Lyreco Finland and to find cost savings directly by changing the operative practices in the office and also indirectly by affecting the level of environmental knowledge of the personnel. During the greening process, the aim was also to create concrete arguments for marketing as well. The circle of greening process, which was especially created for this diploma work, was used as a method. The circle divides a year to themes and sections separated by factors of environmental impacts. Separation is based on Brett Wills’ thoughts of seven green wastes (Wills, Brett. The Green Intensions. 2009) and follows it uneasily. The circle aimed at ensuring evolutionary growth of knowledge instead of being revolutionary in the changing process. Committing personnel to the process from its start by asking ideas from them and giving them clear directions was an important part of the research of operative management. Because of working from distance, communication with personnel was operated by frequent training days and weekly greening notes via emails and intranet. Also availability for communication was an important task because of the telecommuting. Research results of this work show that operative environmental management in an officebased business today is mostly management of change. When the strategic environmental friendliness is taken into a concrete level, the most important individual factor is motivating the operating personnel. Research shows that evolutionary change is found being an efficient way to make a change. Also understanding one´s own impact on the environmental burden and on the whole greening process clearly motivates the personnel. Results show that in the operative realization of the greening process, clear directions of new working practices, being as concrete as possible, and committing personnel to follow them make the process more effective. The operative environmental management and the cycle of the greening process decrease the environmental burden and save costs. The concrete results could be used as believable arguments in marketing and therefore exploited in communication with interest groups. Commitment of the management is also one of the key factors of success in the greening process. In this research, changes in the business field by a company trade took the focus of the management away from the greening process and made the process more inefficient by decreasing the amount of training days. The circle of greening process will be used as a tool in the future, as well, and therefore it will help observe environmental impacts of a company and increase sustainable development. Commitment of management to the evolutionary environmental work helps the operating personnel lower environmental impacts, decrease costs and build a concretely greener image.

Working capital management in the small and medium-sized enterprises Case: Project-based business environment in Flowrox Oy

This Master´s thesis illustrates how growing a business ties up the company´s working capital and what the cost of committed capital. In order to manage a company´s working capital in rapid business growth phase, the thesis suggests that by monitoring and managing the operating and cash conversion cycles of customers´ projects, a company can find ways to secure the required amount of capital. The research method of this thesis was based on literature reviews and case study research. The theoretical review presents the concepts of working capital and provides the background for understanding how to improve working capital management. The company in subject is a global small and medium-sized enterprise that manufactures pumps and valves for demanding process conditions. The company is expanding, which creates lots of challenges. This thesis concentrates to the company´s working capital management and its efficiency through the supply chain and value chain perspective. The main elements of working capital management are inventory management, accounts receivable management and accounts payable management. Prepayments also play a significant role, particularly in project-based businesses. Developing companies´ working capital management requires knowledge from different kind of key operations´ in the company, like purchasing, production, sales, logistics and financing. The perspective to develop and describe working capital management is an operational. After literature reviews the thesis present pilot projects that formed the basis of a model to monitor working capital in the case company. Based on analysis and pilot projects, the thesis introduces a rough model for monitoring capital commitments in short time period. With the model the company can more efficiently monitor and manage their customer projects.

Automated Purchase to Pay Process Value Modeling and Comparative Process Speeds

The importance of efficient supply chain management has increased due to globalization and the blurring of organizational boundaries. Various supply chain management technologies have been identified to drive organizational profitability and financial performance. Organizations have historically been concentrating heavily on the flow of goods and services, while less attention has been dedicated to the flow of money. While supply chains are becoming more transparent and automated, new opportunities for financial supply chain management have emerged through information technology solutions and comprehensive financial supply chain management strategies. This research concentrates on the end part of the purchasing process which is the handling of invoices. Efficient invoice processing can have an impact on organizations working capital management and thus provide companies with better readiness to face the challenges related to cash management. Leveraging a process mining solution the aim of this research was to examine the automated invoice handling process of four different organizations. The invoice data was collected from each organizations invoice processing system. The sample included all the invoices organizations had processed during the year 2012. The main objective was to find out whether e-invoices are faster to process in an automated invoice processing solution than scanned invoices (post entry into invoice processing solution). Other objectives included looking into the longest lead times between process steps and the impact of manual process steps on cycle time. Processing of invoices from maverick purchases was also examined. Based on the results of the research and previous literature on the subject, suggestions for improving the process were proposed. The results of the research indicate that scanned invoices were processed faster than e-invoices. This is mostly due to the more complex processing of e-invoices. It should be noted however that the manual tasks related to turning a paper invoice into electronic format through scanning are ignored in this research. The transitions with the longest lead times in the invoice handling process included both pre-automated steps as well as manual steps performed by humans. When the most common manual steps were examined in more detail, it was clear that these steps had a prolonging impact on the process. Regarding invoices from maverick purchases the evidence shows that these invoices were slower to process than invoices from purchases conducted through e-procurement systems and from preferred suppliers. Suggestions on how to improve the process included: increasing invoice matching, reducing of manual steps and leveraging of different value added services such as invoice validation service, mobile solutions and supply chain financing services. For companies that have already reaped all the process efficiencies the next step is to engage in collaborative financial supply chain management strategies that can benefit the whole supply chain.

Feasibility study of submerged membrane bioreactor (MBR) as an alternative to conventional activated sludge process (CASP) for municipal wastewater treatment: A pilot scale study

The conventional activated sludge processes (CAS) for the treatment of municipal wastewater are going to be outdated gradually due to more stringent environmental protection laws and regulations. The Membrane bioreactors (MBRs) are the most promising modern technology widely accepted in the world of wastewater treatment due to their highly pronounced features such as high quality effluent, less foot print and working under high MLSS concentration. This research project was carried out to investigate the feasibility and effectiveness of MBR technology compare to the CAS process based on the scientific facts and results. The pilot scale MBR pilot plant was run for more than 150 days and the analysis results were evaluated. The prime focus of the project was to evaluate the correlation of permeate flux under different operating MLSS concentrations. The permeate flux was found almost constant regardless of variations in MLSS concentrations. The removal of micropollutant such as heavy metals, PCPPs, PFCs, steroidal hormones was also studied. The micropollutant removal performance of MBR process was found relatively effective than CAS process. Furthermore, the compatibility of submerged membranes within the bioreactor had truly reduced the process footprint.

Working fluid selection and design of small-scale waste heat recovery systems based on organic Rankine cycles

Demand for the use of energy systems, entailing high efficiency as well as availability to harness renewable energy sources, is a key issue in order to tackling the threat of global warming and saving natural resources. Organic Rankine cycle (ORC) technology has been identified as one of the most promising technologies in recovering low-grade heat sources and in harnessing renewable energy sources that cannot be efficiently utilized by means of more conventional power systems. The ORC is based on the working principle of Rankine process, but an organic working fluid is adopted in the cycle instead of steam. This thesis presents numerical and experimental results of the study on the design of small-scale ORCs. Two main applications were selected for the thesis: waste heat re- covery from small-scale diesel engines concentrating on the utilization of the exhaust gas heat and waste heat recovery in large industrial-scale engine power plants considering the utilization of both the high and low temperature heat sources. The main objective of this work was to identify suitable working fluid candidates and to study the process and turbine design methods that can be applied when power plants based on the use of non-conventional working fluids are considered. The computational work included the use of thermodynamic analysis methods and turbine design methods that were based on the use of highly accurate fluid properties. In addition, the design and loss mechanisms in supersonic ORC turbines were studied by means of computational fluid dynamics. The results indicated that the design of ORC is highly influenced by the selection of the working fluid and cycle operational conditions. The results for the turbine designs in- dicated that the working fluid selection should not be based only on the thermodynamic analysis, but requires also considerations on the turbine design. The turbines tend to be fast rotating, entailing small blade heights at the turbine rotor inlet and highly supersonic flow in the turbine flow passages, especially when power systems with low power outputs are designed. The results indicated that the ORC is a potential solution in utilizing waste heat streams both at high and low temperatures and both in micro and larger scale appli- cations.

Successful IFRS standard change implementation process after the initial IFRS implementation

The main objective of the study was to form a strategic process model and project management tool to help IFRS change implementation projects in the future. These research results were designed based on the theoretical framework of Total Quality Management and leaning on the facts that were collected during the empirical case study of IAS 17 change. The us-age of the process oriented approach in IFRS standard change implementation after the initial IFRS implementation is rationalized with the following arguments: 1) well designed process tools lead to optimization of resources 2) With the help of process stages and related tasks it is easy to ensure the efficient way of working and managing the project as well as make sure to include all necessary stakeholders to the change process. This research is following the qualitative approach and the analysis is in describing format. The first part of the study is a literature review and the latter part has been conducted as a case study. The data has been col-lected in the case company with interviews and observation. The main findings are a process model for IFRS standard change process and a check-list formatted management tool for up-coming IFRS standard change projects. The process flow follows the main cornerstones in IASB’s standard setting process and the management tool has been divided to stages accordingly.

Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP) plan in lobster processing industries

This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (CCPs) including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP) was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP) plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP) hazards.

Real-time simulation of multibody systems with applications for working mobile vehicles

This dissertation describes an approach for developing a real-time simulation for working mobile vehicles based on multibody modeling. The use of multibody modeling allows comprehensive description of the constrained motion of the mechanical systems involved and permits real-time solving of the equations of motion. By carefully selecting the multibody formulation method to be used, it is possible to increase the accuracy of the multibody model while at the same time solving equations of motion in real-time. In this study, a multibody procedure based on semi-recursive and augmented Lagrangian methods for real-time dynamic simulation application is studied in detail. In the semirecursive approach, a velocity transformation matrix is introduced to describe the dependent coordinates into relative (joint) coordinates, which reduces the size of the generalized coordinates. The augmented Lagrangian method is based on usage of global coordinates and, in that method, constraints are accounted using an iterative process. A multibody system can be modelled as either rigid or flexible bodies. When using flexible bodies, the system can be described using a floating frame of reference formulation. In this method, the deformation mode needed can be obtained from the finite element model. As the finite element model typically involves large number of degrees of freedom, reduced number of deformation modes can be obtained by employing model order reduction method such as Guyan reduction, Craig-Bampton method and Krylov subspace as shown in this study The constrained motion of the working mobile vehicles is actuated by the force from the hydraulic actuator. In this study, the hydraulic system is modeled using lumped fluid theory, in which the hydraulic circuit is divided into volumes. In this approach, the pressure wave propagation in the hoses and pipes is neglected. The contact modeling is divided into two stages: contact detection and contact response. Contact detection determines when and where the contact occurs, and contact response provides the force acting at the collision point. The friction between tire and ground is modelled using the LuGre friction model, which describes the frictional force between two surfaces. Typically, the equations of motion are solved in the full matrices format, where the sparsity of the matrices is not considered. Increasing the number of bodies and constraint equations leads to the system matrices becoming large and sparse in structure. To increase the computational efficiency, a technique for solution of sparse matrices is proposed in this dissertation and its implementation demonstrated. To assess the computing efficiency, augmented Lagrangian and semi-recursive methods are implemented employing a sparse matrix technique. From the numerical example, the results show that the proposed approach is applicable and produced appropriate results within the real-time period.

Creativity and the working artist/teacher : the relationships

The purpose of this qualitative study was to understand the relationships between creativity and the working artist/teacher employed by an art college. The topic emerged from my job as an instructor at The Ontario College of Art which was used as the primary data resource and provided the highest caliber of professionals to chose from. Existent data were used to facilitate the study generated by the research of Cawelti, Rappaport, and Wood (1992). The data were generated by a group of 5 faculty members from The University of Northern Iowa, recognized for their expertise in the arts (a painter, a poet, a sculptor, a novelist, and a photographer). They were asked to respond to the following statement: "In as much detail as you like, list the things that you did, thought, or felt the last time you created an artistic product. II Cawelti, Rappaport, and Wood (1992) produced three models of the creative process, each building on the previous, with the resultant third,being in my opinion, an excellent illustration (text/visual) of the creative process. Model three (Appendix D) presented a "multi-dimensional view of the creative process: time, space, observatility, and consciousnessll (p. 90). Model three utilized a visual mapping device along the bottom of the page linked to text segments above. Both the visual and the text were interrelated so that they harmonized into a comprehensive "picture." The parti'cipants of this qualitative study were asked to consider model three from their professional perspective as artist/teachers. The interpretive sciences directed the methodology. The hermeneutic circle of continuous reflection from the whole to the part and back to the whole was an important aspect of the data analyses. Four members of the Foundation Department at The Ontario College of Art were the key participants. A series of conversational interviews was the primary source of data collection, this was augmented by observation, fie,ldnotes, and follow up telephone interviews. Transcripts of interviews were returned to participants for reflection and the telephone was used to discuss any additional -points raised. Analysis consisted of coding and organizing data according to emerging themes. These themes formed the basis for the narrative stories. The text of the narrative stories were given back to each participant for further comment. Revisions were made until both the researcher and the participants felt that the stories reflected reality. The resultant whole was critiqued from the researcher's perspective. The significance of this study was discussed as it pertains to the working artist/teacher and areas in need of further study are pointed out.

An examination of how youth understand their rights during the criminal process

In order for young people to meaningfully participate in the criminal justice system they must possess an understanding of their rights and legal procedures. To examine their understanding, 50 young people between the ages of 13-17 who received an extrajudicial sanction or were sentenced to probation, were recruited from the Finch Courthouse in Toronto, Ontario. Semi-structured interviews were conducted with participants regarding their understanding of their due process rights and their rights under the United Nations Convention on the Rights of the Child. Youth who indicated involvement in plea bargaining were also asked about their experiences during this procedure. In addition, the present study examined youths' perceptions of power differences in their interactions with criminal justice officials working within an institution that has tremendous control over offenders' lives. The results indicate that while youth seem to have some understanding oftheir rights and legal procedures, they nevertheless feel ill-equipped to invoke their rights in an adult-led criminal justice system. Furthermore, while past literature has often conceptualized youth understanding based on age (e.g., Crawford & Bull, 2006) the findings of the present study demonstrate that while age plays some role, the lack of power experienced by youth vis-a-vis adults, and specifically criminal justice professionals, has the most bearing on the inability of youth to exercise their rights.

Being Relational With Underserved Youth: A Reflective Process

When working with under-served youth, possibly the most important, yet often times the most difficult, thing for practitioners to do is to build positive, trusting, open relationships. This study aims to address this challenge. Two groups of under-served youth were examined, one being teens deemed “at-risk” and one being youth with Autism Spectrum Disorder (ASD). This study was novel in its approach as all efforts were made to ensure the youth's opinions on how to be relational with them were heard. Two youths with ASD were nonverbal and a special picture interview procedure was developed to allow their participation. Three thematic statements emerged from the data collected: 1. Youth need low anxiety relationships. 2. Youth need novel forms of engagement. 3. Youth need us to understand that their actions reflect their histories. The analyses that lead to these statements are described as well as the reasoning and implications of these statements.

Forgiveness in Two Minds: Understanding Forgiveness Through Dual-Process Theory

In this thesis, I examined the relevance of dual-process theory to understanding forgiveness. Specifically, I argued that the internal conflict experienced by laypersons when forgiving (or finding themselves unable to forgive) and the discrepancies between existing definitions of forgiveness can currently be best understood through the lens of dual-process theory. Dual-process theory holds that individuals engage in two broad forms of mental processing corresponding to two systems, here referred to as System 1 and System 2. System 1 processing is automatic, unconscious, and operates through learned associations and heuristics. System 2 processing is effortful, conscious, and operates through rule-based and hypothetical thinking. Different definitions of forgiveness amongst both lay persons and scholars may reflect different processes within each system. Further, lay experiences with internal conflict concerning forgiveness may frequently result from processes within each system leading to different cognitive, affective, and behavioural responses. The study conducted for this thesis tested the hypotheses that processing within System 1 can directly affect one's likelihood to forgive, and that this effect is moderated by System 2 processing. I used subliminal conditioning to manipulate System 1 processing by creating positive or negative conditioned attitudes towards a hypothetical transgressor. I used working memory load (WML) to inhibit System 2 processing amongst half of the participants. The conditioning phase of the study failed and so no conclusions could be drawn regarding the roles of System 1 and System 2 in forgiveness. The implications of dual-process theory for forgiveness research and clinical practice, and directions for future research are discussed.

Conceptualizing Institutional Capacity Building Through a Learning Process Set in Motion by a Foundation

Employing critical pedagogy and transformative theory as a theoretical framework, I examined a learning process associated with building capacity in community-based organizations (CBOs) through an investigation of the Institutional Capacity Building Program (ICBP) initiated by a Foundation. The study sought to: (a) examine the importance of institutional capacity building for individual and community development; (b) investigate elements of a process associated with a program and characteristics of a learning process for building capacity in CBOs; and (c) analyze the Foundation’s approach to synthesizing, systematizing, and sharing learning. The study used a narrative research design that included 3 one-on-one, hour-long interviews with 2 women having unique vantage points in ICBP: one is a program facilitator working at the Foundation and the other runs a CBO supported by the Foundation. The interviews’ semistructured questions allowed interviewees to share stories regarding their experience with the learning process of ICB and enabled themes to emerge from their day-to-day experience. Through the analysis of this learning process for institutional capacity building, a few lessons can be drawn from the experience of the Foundation.

Working Together: Librarian and Student Collaboration Through Active Learning in a Library Eclassroom

Active learning strategies based on several learning theories were incorporated during instruction sessions for second year Biological Sciences students. The instructional strategies described in this paper are based primarily on sociocultural and collaborative learning theory, with the goal being to expand the relatively small body of literature currently available that discusses the application of these learning theories to library instruction. The learning strategies employed successfully involved students in the learning process ensuring that the experiences were appropriate and effective. The researchers found that, as a result of these strategies (e.g. teaching moments based on the emerging needs of students) students’ interest in learning information literacy was increased and students interacted with information given to them as well as with their peers. Collaboration between the Librarians, Co-op Student and Senior Lab Instructor helped to enhance the learning experience for students and also revealed new aspects of the active learning experiences. The primary learning objective, which was to increase the students’ information skills in the Biological Sciences, was realized. The advantages of active learning were realized by both instructors and students. Advantages for students attained during these sessions include having their diverse learning styles addressed; increased interaction with and retention of information; increased responsibility for their own learning; the opportunity to value not only the instructors, but also themselves and their peers as sources of authority and knowledge; improved problem solving abilities; increased interest and opportunities for critical thinking, as a result of the actively exchanging information in a group. The primary advantage enjoyed by the instructors was the opportunity to collaborate with colleagues to reduce the preparation required to create effective library instruction sessions. Opportunities for further research were also discovered, including the degree to which “social loafing” plays a role in collaborative, active learning.

Working of Women’s Industrial Co-operative Societies in Kerala

This study deals with the working of Women’s Industrial Co-operative Societies (WICS) in Kerala. The formation of women’s co-operatives was identified as a lucrative enterprise and a feasible proposition for empowerment of women through encouraging and ensuring their active participation in the process of social and economic development. The problem of unemployment of Women and poverty in India can be tackled effectively only through suitable and appropriate self-employment schemes. WICS help to supplement the income of families and thus raise the standard of living. WICS in Kerala have a significant role in the elimination of industrial backwardness and mounting employment. This study focuses its attention on the performance aspects of WICS. It also gives an introduction to the co-operative movement and review of literature on industrial co-operatives in general and women’s industrial co-operatives in particular.