Fluorescent probe and NMR studies of the aggregation of bile salts in aqueous solution

The binding of the fluorescent probes 1-anilino-8-naphthalene sulfonate and dansyl cadaverine to the sodium salts of cholic, deoxycholic and dehydrocholic acids has been investigated. Enhanced probe solubilisation accompanies aggregation. Monitoring of fluorescence intensities as a function of bile salt concentration permits the detection of primary micelle formation, as well as secondary association. The transition concentrations obtained by fluorescence are in good agreement with values determined for the critical micelle concentrations, by other methods. Differences in the behaviour of cholate and deoxycholate have been noted. Fluorescence polarisation studies of 1,6-diphenyl-1,3,5-hexatriene solubilised in bile salt micelles suggest a higher microviscosity for the interior of the deoxycholate micelle as compared to cholate. 1H NMR studies of deoxycholate over the range 1–100 mg/ml suggest that micelle formation leads to a greater immobilisation of the C18 and C19 methyl groups as compared to the C21 methyl group. Well resolved 13C resonances are observed for all three steroids even at high concentration. Both fluorescence and NMR studies confirm that dehydrocholate does not aggregate.

Laser Raman spectroscopic study of ferroelastic LiCsSO4

Lithium caesium sulphate has been reported to undergo a phase transition from the room temperature orthorhombic phase with space groupP cmn to a final phase with space groupP 22/n. Though a sharp anomaly in its physical properties has been found at 202.0;K, it was found that there was a need for careful investigations in the vicinity of 240 and 210.0;K. Since the changes in the crystal structure involve primarily a rotation of the SO4 tetrahedron about thec-axis and as this may be reflected both in the intensity and polarisation of the internal as well as external phonon modes, the laser Raman spectra of oriented single crystals of LiCsSO4 at different temperatures were investigated. For correlation and definite identification of the spectral features, its infrared absorption spectrum was also studied. An analysis of the intensities and polarizations of the internal modes of the sulphate ions reveals the change in symmetry of the crystal. The integrated intensity and peak height of thev 1 line, plotted against temperature show anomalous peaks in the region of the phase transition. Differential scanning calorimetric study gives the enthalpy change ΔH across the phase transition to be 0.213 kJ/mol.

TlBr raw material purification, crystal growth, annealing, detector fabrication and characterisation for gamma-ray detector applications

The research reported in this thesis dealt with single crystals of thallium bromide grown for gamma-ray detector applications. The crystals were used to fabricate room temperature gamma-ray detectors. Routinely produced TlBr detectors often are poor quality. Therefore, this study concentrated on developing the manufacturing processes for TlBr detectors and methods of characterisation that can be used for optimisation of TlBr purity and crystal quality. The processes under concern were TlBr raw material purification, crystal growth, annealing and detector fabrication. The study focused on single crystals of TlBr grown from material purified by a hydrothermal recrystallisation method. In addition, hydrothermal conditions for synthesis, recrystallisation, crystal growth and annealing of TlBr crystals were examined. The final manufacturing process presented in this thesis deals with TlBr material purified by the Bridgman method. Then, material is hydrothermally recrystallised in pure water. A travelling molten zone (TMZ) method is used for additional purification of the recrystallised product and then for the final crystal growth. Subsequent processing is similar to that described in the literature. In this thesis, literature on improving quality of TlBr material/crystal and detector performance is reviewed. Aging aspects as well as the influence of different factors (temperature, time, electrode material and so on) on detector stability are considered and examined. The results of the process development are summarised and discussed. This thesis shows the considerable improvement in the charge carrier properties of a detector due to additional purification by hydrothermal recrystallisation. As an example, a thick (4 mm) TlBr detector produced by the process was fabricated and found to operate successfully in gamma-ray detection, confirming the validity of the proposed purification and technological steps. However, for the complete improvement of detector performance, further developments in crystal growth are required. The detector manufacturing process was optimized by characterisation of material and crystals using methods such as X-ray diffraction (XRD), polarisation microscopy, high-resolution inductively coupled plasma mass (HR-ICPM), Fourier transform infrared (FTIR), ultraviolet and visual (UV-Vis) spectroscopy, field emission scanning electron microscope (FESEM) and energy-dispersive X-ray spectroscopy (EDS), current-voltage (I-V) and capacity voltage (CV) characterisation, and photoconductivity, as well direct detector examination.

Open-circuit potential-time transient of the magnesium anode

On interrupting polarisation, the magnesium anode exhibits a negative overshoot in potential followed by a slow recovery to a steady state value. A model has been proposed to explain the opencircuit potential-time transient in terms of a spontaneous passivation of the metal and the consequent changes in the corrosion potential. Theoretical expressions have been derived for the timedependence of the open-circuit electrode potential. Calculated, potential-time curves thus obtained are in qualitative agreement with experimental data. A possible application of this phenomenon to develop non-destructive quality control tests of Mg, Li and Al-based dry cells has been pointed out.

Measurement of dielectric constant of conducting liquids

A ratio transformer method suitable for the measurement of the dielectric constant of highly conducting liquids is described. The resistance between the two plates of the capacitor can be as low as 2 k Omega . In this method variations in this low resistance will not give any error in capacitance measurement. One of the features of this method is the simplicity in balancing the resistance, using a LDR (light dependent resistor), without influencing the independent capacitance measurement. The ratio transformer enables the ground capacitances to be eliminated. The change in leakage inductance of the ratio transformer while changing the ratios is also taken into account. The capacitance of a dielectric cell of the order of 50 pF can be measured from 1000 Hz to 100 kHz with a resolution of 0.06 pF. The electrode polarisation problem is also discussed.

Ferroelectricity in lithium potassium sulphate

. Measurement of the relation between polarisation P and electric field E for lithium potassium sulphate (LiKSO4) was made in the low temperature range below room temperature. The P-E hysteresis loops along the c axis of LiKSO4 were observed in the low-temperature phase below the lower transition point Ttl of about -70 degrees C, and in the intermediate phase below the upper transition point Ttu of about -25 degrees C. These phases were found to be ferroelectric. The temperature dependence of the spontaneous polarisation Ps and the electric coercive field Ec were obtained.

Effect of laser surface treatment on microstructure and properties of MRI 230D Mg alloy

A creep resistant Mg alloy MRI 230D was subjected to laser surface treatment using Nd:YAG laser equipped with a fiber optics beam delivery system in argon atmosphere. The laser surface treatment produced a fine dendritic microstructure and this treatment was beneficial for the corrosion and wear resistance of the alloy. Long-term linear polarisation resistance and Electrochemical Impedance Spectroscopy measurements confirmed that the polarisation resistance values of laser treated material were twice as high as that for the untreated material. This improved behaviour was due to the finer and more homogenous microstructure of the laser treated surface. The laser treatment also increased surface hardness two times and reduced the wear rate by 25% due to grain refinement and solid solution strengthening.

Pengarna eller livet? : En kvalitativ och longitudinell studie om långtidsarbetslösa unga i ett aktörsperspektiv

Your money or your life? A qualitative follow-up study of the young unemployed from an actor perspective is a qualitative and longitudinal study following 36 unemployed young people in Helsinki over a span of ten years. The purpose of the study is to shed light on how a few young people view employment/unemployment and their lives and future, how they as unemployed perceive their encounters with society, and how society supports them. Four so-called key informants were followed at a finer level of empirical detail. They were chosen for the thematic interviews because of their different personalities, starting points and preferences. Although some differences were expected, what the results show is quite striking. The individual stories raise a number of questions about differences between young people, about society s view of the young unemployed, and about the principles behind the so-called activation policy and how society s support is distributed. The key informants descriptions underline that the group young unemployed does not consist of individuals who are alike but that life is complex, that paid work and unemployment can be perceived very differently, and that background and unofficial support can have consequences for self-perception and for ways of looking at the future, vocational choices, paid work and activation policy. Margaret S. Archer s theory of Morphogenesis and Barbara Cruikshank s theory of constructing democracies compose the study s theoretical framework. The key informants stories give a picture of a formal support system that, even though it puts part of the responsibility for unemployment on the individuals themselves, in the name of fairness and equality, treats them in an impersonal way, not giving their personal situation and wishes much weight. As a consequence, those who share the dominant values of society do well, while others who do not are faced with difficulties. The bigger the gap between society s and the individual s values, the bigger the risk to be met by little understanding and by penalties. And vice versa: Those who initially have the right values and know how to deal with authorities get heard and their opinions get accepted. The informants ask for a more personal encounter, which could improve both the atmosphere and the clients experiences of being heard. Still the risk of having a more individualistic system should be addressed, as a new system might generate new winners, but just as well give new losers. Finally, we have to ask if the so-called activation policy is looking for answers primarily to a macro-level problem on the micro-level. If it does not produce more jobs, its support for the unemployed will be insignificant. It is not enough to think about what to do at the grassroots level to make the system more functional and support job-seeking. If the current rate of unemployment endures, the quality of life of the unemployed should be addressed. A first step could be taken by placing less guilt on the unemployed. Instead of talking about activating the unemployed, discussion should be targeted at removing structural impediments to employment. If we want to have less polarisation between the those with paid work and those without, who often struggle with low incomes, we need to include the macro-level in the discussion. What does high unemployment mean in a work-based society, where the individual s self-perception and important social forms of support are linked to labour income? And what can be done at the macro-level to change this undesirable condition at the micro-level? Keywords: Unemployment, Youth, Public interventions, Activation policy, Individual actors, Qualitative, Longitudinal, Holistic, Helsinki, Finland

Slogans of Change : Three Outlooks on Finnish Television

The study Slogans of Change. Three Outlooks on Finnish Television Contents is concerned with alleged changes of television contents during the 1990s and 2000s, such as dumbing down, tabloidisation, entertainisation , and the like. Specifically, the focus is on the ways these changes might manifest in Finnish television. The aim of the study has been threefold: 1. To operationalise public and academic discussions about changes via specific slogans emerging from the debates; 2. Consequently, to study the slogans empirically and reflect on the findings with earlier research, including studies on institutional and audience-related aspects; 3. Finally, to suggest what the findings might mean regarding discussions about television s role, and what kinds of slogans or concepts might best serve future discussions and research. The empirical outlooks presented in this study offer analyses with three different sets of opposing slogans of change. The outlooks also follow three different traditions of the study of television. The first outlook focuses on quantity, as it gives a longitudinal (1993-2004), macro-level view on programme structures. The methodological approach is derived from media economic and policy studies. The claims that frame the analysis are convergence versus diversification of programme structures. The second outlook provides quantitative and qualitative views on the characteristics and quality  the term signifying essence as well as worth  of Finnish television journalism during sample weeks from the years 2002 and 2003. This outlook follows the traditions of quantitative content analysis found in journalism studies coupled with descriptive qualitative content analyses. The slogans reflected in this section are the lightening or widening of journalism. The third outlook narrows down the material and focuses at a micro-level on form; that is, communicative conventions in a small array of selected programmes in 1993, 2000 and during 2002-2004. The analyses have been inspired by the method of conversation analysis of verbal interaction, and coupled with qualitative close readings, with the focus of different communicative situations in the programmes. The catchphrases employed in this part are emotainment versus democratainment, coupled with more specific claims of discursive hybridisation and conversationalisation. The findings depict that, empirically, changes in Finnish television contents are not clear linear trends and cannot easily be moulded into neat slogans. The quantitative outlook on programme output during 1993-2004 depicts a tendency towards differentiation of channels, paving the way for the multi-channel digital system. The change in programme structures, however, is not dramatic on the level of total output. The second outlook suggests that the dualistic concepts, such as the pair information-entertainment, are not sufficient in understanding the array and changes of programmes that could be called journalism. The outlook on communicative conventions highlights hybridisation in the manner of television talk and its relation to broader debates on contents. Despite the three dissimilar empirical approaches, unifying aspects emerge. The outlooks suggest, albeit in different ways, tendencies toward distinction and polarisation. This study proposes that in order to facilitate a more nuanced understanding of the changes in television contents, dualistic slogans should be replaced with a multi-dimensional understanding of the concept of diversity.

Dipole patterns in the structures of some ferroelectrics and antiferroelectrics

The dipole patterns in the ferroelectric and antiferroelectric structures are drawn according to experimentally determined symmetry changes in the ferroelectrics and antiferroelectrics. For the ferroelectrics the dipoles of the unit cells for one domain are oriented in parallel and the directions of the polarisation in the adjacent domains are at definite angles to each other. It is assumed for the antiferroelectrics, that the superstructural unit cell is formed by the adjacent cells of the paraelectrical modification; the subcells having the antiparallel directions of the polarisation. It is these superstructural cells of the antiferroelectrics that are determined during the experimental investigations of the antiferroelectrics. The superstructural cells of the adjacent domains are different. In one case, the difference is that in the adjacent domains, the directions of the polarisation in the subcells form an angle (e.g., in PbZrO3). In other cases the superstructural cells have not only different directions of the polarisation in the subcells but different signs of the enantiomorphism (e.g., NH4H2PO4). In the third case, the only difference is that the superstructural unit cells in the adjacent domains are turned by an angle to each other round the direction of the subcell polarisation [e.g., (NH4)2H3IO6], etc.

The Hybrid Consumer: Exploring the Drivers of a New Consumer Behaviour Type

A dramatically different consumption pattern seems to be emerging among a vast group of consumers. This may mean that conventional consumer stereotypes and segmentation theory are becoming outdated. The so called hybrid consumers seem to increasingly opt for both premium and budget alternatives in various product and service categories while mid-priced alternatives are losing share in their consumption basket. Although this type of polarisation, or dispersion, is already recognized as an important change, hybrid behaviour is still largely under-researched. The present study aims to analyze the possible drivers of hybrid consumption and by identifying typical categories and situations of trading up versus trading down derive tentative characteristics of hybrid consumption for further research on the topic. A tentative pattern of hybrid consumption was identified, which relates trading up to high-involvement, discretional spending and trading down to low-involvement necessities. However, it was also found that hybrid consumption transcends product category boundaries and may thus be less straightforward than previously perhaps assumed. In addition, a purchase pattern continuum was developed, accounting for various degrees of hybrid consumption.

Solid State Electrochemical Sensors in Process Control

The basic principles of operation of gas sensors based on solid-state galvanic cells are described. The polarisation of the electrodes can be minimised by the use of point electrodes made of the solid electrolyte, the use of a reference system with chemical potential close to that of the sample system and the use of graded condensed phase reference electrodes. Factors affecting the speed of response of galvanic sensors in equilibrium and non-equilibrium gas mixtures are considered with reference to products of combustion of fossil fuels. An expression for the emf of non-isothermal galvanic sensors and the criterion for the design of temperature compensated reference electrodes for non-isothermal galvanic sensors are briefly outlined. Non-isothermal sensors are useful for the continuous monitoring of concentrations or chemical potentials in reactive systems at high temperatures. Sensors for oxygen, carbon, and alloying elements (Zn and Si) in liquid metals and alloys are discussed. The use of auxiliary electrodes permits the detection of chemical species in the gas phase which are not mobile in the solid electrolyte. Finally, the cause of common errors in galvanic measurements, and tests for correct functioning of galvanic sensors are given. 60 ref.--AA

Investigation of exchange of energy between zeeman and dipolar reservoirs in the rotating frame in solids

Exchange of energy between Zeeman and dipolar reservoirs in the rotating frame during spin-lock has important implications for the understanding of the Hartmann-Hahn cross polarisation process and is examined here with experiments on ammonium dihydrogen phosphate. It is observed that energy exchange between the two reservoirs takes place indicating that the relative magnitude of the dipolar coupling in relation to the applied r.f. field may have a role to play in determining the rate of exchange of energy between the two reservoirs.

Role of Li+ ions in corrosion behaviour of 8090 Al-Li alloy and aluminium in pH 12 aqueous solutions

The influence of Li+ ions on the corrosion behaviour of the Al-Li alloy 8090-T851 and of commercially pure aluminium in aqueous solutions at pH 12 was studied by weight loss and electrochemical polarisation methods. The inhibiting role of Li+ was concentration dependent, corrosion rate decreasing lineally with log[Li+] in the concentration range 10(-4)-10(-1) mol L(-1). A change from general to pitting corrosion was evident from scanning election microscopy studies. Polarisation studies revealed that Li+ primarily acts as an anodic inhibitor (passivator). Passive film formation and stability also become more feasible with increasing Li+ concentration. Fitting potential was dependent on the Cl- ion concentration in the solution. Both materials were affected similarly by the presence of Li+ ions, the corrosion rate of the alloy being slightly lower. This is attributed to the lithium in the alloy acting as a source of lithium for passive film formation. (C) 1995 The Institute of Materials.

Antiferroelectric lead zirconate thin films by pulsed laser ablation

Lead Zirconate (PbZrO3) thin films were deposited by pulsed laser ablation method. Pseudocubic (110) oriented in-situ films were grown at low pressure. The field enforced anti-ferroelectric (AFE) to ferroelectric (FE) phase transformation behaviour was investigated by means of a modified Sawyer Tower circuit as well as capacitance versus applied voltage measurements. The maximum polarisation obtained was 36 mu C cm(-2) and the critical field to induce ferroelectric state and to reverse the antiferroelectric slates were 65 and 90 kV cm(-1) respectively. The dielectric properties were investigated as a function of frequency and temperature. The dielectric constant of the AFE lead zirconate thin him was 190 at 100 kHz which is more than the bulk ceramic value (120) with a dissipation factor of less than 0.07. The polarisation switching kinetics of the antiferroelectric PbZrO3 thin films showed that the switching time to be around 275 ns between antipolar state to polar states. (C) 1999 Elsevier Science S.A. All rights reserved.