Regelmechanismen und Determinanten der Transkription in Polytänchromosomen von Chironomus und Drosophila

Die kumulative Habil.‐Schrift gründet sich auf 6 Originalpublikationen, die beschreiben: [Sass, H. (1982), Cell 28: 269‐278]. RNA polymerase B in polytene chromosomes: Immunofluorescent and autoradiographic analysis during stimulated and repressed RNA synthesis. Elektronenmikroskopie charakterisierte das C. tentans Balbianiring BR2‐Gen von Speicheldrüsenchromosomen als hoch aktives 5‐6 μm langes single‐copy Gen, das 33/μm RNAPolymerasen B (Pol II) transkribieren (Diss., Sass, H., 1978, Univ. Tübingen). Diese Immunfluoreszenzstudie ortet Pol II in allen Interbanden von Region IV‐3B10‐3B5 des nichtinduzierten BR2. Prominente Fluoreszenz im BR2‐Genort 3B9/10 zeigt, das BR2‐Gen ist präaktiv, wie erwartet. 3H‐Autoradiogramme beweisen, in allen fluoreszierenden BR2, BR1, BR3, Puffs, aufgelockerten Banden, Interbanden und Loci ohne Puffing, synthetisiert Pol II RNA. Die genomweite ständige Pol II‐Präsenz zeigt, dass, wie beim nichtinduzierten BR2‐Gen, bereits schon gebundene Pol II wohl auch andere Gene präaktiviert. So erfolgt die Regulation der Transkription mehr über die transkriptionelle Elongation. Auch durch α‐Amanitin, oder Actinomycin D, oder Hitzeschock in vivo kollabierte BR2, BR1, BR3 besitzen Pol II. [Sass, H. (1984), Chromosoma 90: 20‐25]. Gene identification in polytene chromosomes: some Balbiani ring 2 gene sequences are located in an interband‐like region of Chironomus tentans. Immunfluoreszenz und 3H‐Autoradiographie zeigen, dass Injektionen von DRB in Larven die Balbianiringe (BR) sowie andere Puffs und deren Pol II‐Konzentration dramatisch reduzieren. Trotzdem zeigen 3H‐Uridin markierte Speicheldrüsenchromosomen, dass RNA‐Synthese doch in nichtinduzierten BR2, BR1, BR3 erfolgt, aber nur auf reduziertem Level. Das widerspricht der von Egyházi E. (1975, PNAS 73:947‐950) propagierten „Inhibition of Balbiani ring RNA synthesis at the initiation level“ durch DRB. Vielmehr sieht es so aus, DRB wirkt bei der transkriptionellen Elongation inhibierend. Durch in situ‐Hybridisierung von Sequenzen klonierter BR2‐DNA wurde in Speicheldrüsenchromosom IV das BR2‐Gen in Region 3B9/10 direkt identifiziert. [Sass, H. and Pederson, T. (1984), J. Mol. Biol. 180: 911‐926]. Transcription‐dependent localization of U1 and U2 small nuclear ribonucleoproteins at major sites of gene activity in polytene chromosomes. Immunolokalisation von Sm‐, U1‐ und U2snRNP‐spezifischen Antigenen in Speicheldrüsenchromosomen von C. tentans hat zur Entdeckung der beim Spleißen von prä‐mRNA beteiligten U1/U2snRNPs in Balbianiringen BR2, BR1, BR3 sowie anderen Puffs und aufgelockerten Banden geführt. Die überraschenden BR‐Daten zeigen erstmals: (i) Der Spleiß‐Apparat ist in Genloci mit intensiver RNA‐Synthese schon vorhanden. (ii) Immunfluoreszenz reflektiert den Exon‐Intron‐Bau dieser BR‐Gene. (iii) Transkription und spleißosomales Ausschneiden von Introns sind koordiniert. [Sass, H. (1989), Nucleic Acids Research 17: 10508]. Hsp82‐neo transposition vectors to study insertional mutagenesis in Drosophila melanogaster and tissue culture cells; [Sass, H. (1990), Gene 89: 179‐186]. P‐transposable vectors expressing a constitutive and thermoinducible hsp82‐neo fusion gene for Drosophila germline transformation and tissue‐culture transfection. Beschrieben sind Design, Konstruktion und Expression der Genfusion hsp82‐neo als ein in vivo selektierbares Reporter‐/Markergen, die Transposons P{hsp82‐neo/Adh} sowie P{hsp82‐neo} und Transformations‐Vektoren pHS22, pHS24, pHS85, pHS103 und pHS104. Sie stellen das von der Fliege gebildete Enzym bakteriellen Ursprungs, Neomycin‐Phosphotransferase II, für die G418‐Selektion bereit, um die Position, Struktur, Expression und Funktion von Genen mittels hsp82‐neo‐Mutagenese zu erforschen. [Sass, H. and Meselson, M. (1991), Proc. Natl. Acad. Sci. USA 88: 6795‐6799]. Dosage compensation of the Drosophila pseudoobscura Hsp82 gene and the D. melanogaster Adh gene at ectopic sites in D. melanogaster. Quantitative Unterschiede in der Dosiskompensation des X‐chromosomalen hsp82‐Gens von D. pseudoobscura und autosomalen Adh‐Gens von D. melanogaster wurden als Erhöhung der RNAMenge in D. melanogaster gemessen. Beide Transgene sind dosiskompensiert, sprang P{hsp82‐ neo/Adh} in euchromatische Regionen des D. melanogaster X‐Chromosoms. Beide Transgene sind nicht dosiskompensiert, insertierte P{hsp82‐neo/Adh} ins β‐Heterochromatin in Region 20 an der Basis des X. Keine der zehn autosomalen Insertionen ist dosiskompensiert. Die Ergebnisse lassen vermuten, dass X‐chromosomale regulatorische Sequenzen, die für die Verstärkung der Genaktivität um Faktor 2 in Männchen verantwortlich sind, gehäuft im X vorkommen, jedoch im β‐ Heterochromatin und den Autosomen fehlen. Das Kompensationsverhalten der transponierten Gene wird durch das neue chromosomale Milieu des Insertionsortes bestimmt.

Solubility and permeability as in vitro predictors for in vivo performance of fenofibrate IR solid dosage forms

This current work focused on the simulation of in vivo dissolution and permeation in order to be able to predict the in vivo performance of orally administered fenofibrate immediate release formulations. Therefore, the effects of the formulation surfactants on in vivo solubility and permeation of fenofibrate under physiologically relevant excipient concentrations were emphasized.rnIt was shown that the surfactant sodium dodecyl sulfate (SDS) may decrease rather than increase the solubility of fenofibrate in vivo. This was related to the interference of SDS with the vesicular system of the biorelevant medium, FaSSIFmod, and therefore its solubilization capacity. rnMoreover, in vitro permeation studies revealed that SDS concentrations inversely correlated with fenofibrate permeability. Through combination of the observed permeation and solubility data a good in vitro/in vivo correlation regarding Cmax values in humans could be established for five fenofibrate formulations which were based on the same manufacturing technique.rnBesides the experimental part, the major characteristics and their potential implementation in a dissolution/permeation device were discussed based on the promising realization of the in vitro solubility and permeation methods. rn

Hydrodynamics and solid dosage form disintegration/dissolution : immediate release tablets and novel in situ polyelectrolyte gastroretentive drug delivery systems

Solid oral dosage form disintegration in the human stomach is a highly complex process dependent on physicochemical properties of the stomach contents as well as on physical variables such as hydrodynamics and mechanical stress. Understanding the role of hydrodynamics and forces in disintegration of oral solid dosage forms can help to improve in vitro disintegration testing and the predictive power of the in vitro test. The aim of this work was to obtain a deep understanding of the influence of changing hydrodynamic conditions on solid oral dosage form performance. Therefore, the hydrodynamic conditions and forces present in the compendial PhEur/USP disintegration test device were characterized using a computational fluid dynamics (CFD) approach. Furthermore, a modified device was developed and the hydrodynamic conditions present were simulated using CFD. This modified device was applied in two case studies comprising immediate release (IR) tablets and gastroretentive drug delivery systems (GRDDS). Due to the description of movement provided in the PhEur, the movement velocity of the basket-rack assembly follows a sinusoidal profile. Therefore, hydrodynamic conditions are changing continually throughout the movement cycle. CFD simulations revealed that the dosage form is exposed to a wide range of fluid velocities and shear forces during the test. The hydrodynamic conditions in the compendial device are highly variable and cannot be controlled. A new, modified disintegration test device based on computerized numerical control (CNC) technique was developed. The modified device can be moved in all three dimensions and radial movement is also possible. Simple and complex moving profiles can be developed and the influence of the hydrodynamic conditions on oral solid dosage form performance can be evaluated. Furthermore, a modified basket was designed that allows two-sided fluid flow. CFD simulations of the hydrodynamics and forces in the modified device revealed significant differences in the fluid flow field and forces when compared to the compendial device. Due to the CNC technique moving velocity and direction are arbitrary and hydrodynamics become controllable. The modified disintegration test device was utilized to examine the influence of moving velocity on disintegration times of IR tablets. Insights into the influence of moving speed, medium viscosity and basket design on disintegration times were obtained. An exponential relationship between moving velocity of the modified basket and disintegration times was established in simulated gastric fluid. The same relationship was found between the disintegration times and the CFD predicted average shear stress on the tablet surface. Furthermore, a GRDDS was developed based on the approach of an in situ polyelectrolyte complex (PEC). Different complexes composed of different grades of chitosan and carrageenan and different ratios of those were investigated for their swelling behavior, mechanical stability, and in vitro drug release. With an optimized formulation the influence of changing hydrodynamic conditions on the swelling behavior and the drug release profile was demonstrated using the modified disintegration test device. Both, swelling behavior and drug release, were largely dependent on the hydrodynamic conditions. Concluding, it has been shown within this thesis that the application of the modified disintegration test device allows for detailed insights into the influence of hydrodynamic conditions on solid oral dosage form disintegration and dissolution. By the application of appropriate test conditions, the predictive power of in vitro disintegration testing can be improved using the modified disintegration test device. Furthermore, CFD has proven a powerful tool to examine the hydrodynamics and forces in the compendial as well as in the modified disintegration test device. rn