Electronic energy transfer processes in pi-conjugated polymers

Currently pi-conjugated polymers are considered as technologically interesting materials to be used as functional building elements for the development of the new generation of optoelectronic devices. More specifically during the last few years, poly-p-phenylene materials have attracted considerable attention for their blue photoluminescence properties. This Thesis deals with the optical properties of the most representative blue light poly-p-phenylene emitters such as poly(fluorene), oligo(fluorene), poly(indenofluorene) and ladder-type penta(phenylene) derivatives. In the present work, laser induced photoluminescence spectroscopy is used as a major tool for the study of the interdependence between the dynamics of the probed photoluminescence, the molecular structures of the prepared polymeric films and the presence of chemical defects. Complementary results obtained by two-dimensional wide-angle X-ray diffraction are reported. These findings show that the different optical properties observed are influenced by the intermolecular solid-state interactions that in turn are controlled by the pendant groups of the polymer backbone. A significant feedback is delivered regarding the positive impact of a new synthetic route for the preparation of a poly(indenofluorene) derivative on the spectral purity of the compound. The energy transfer mechanisms that operate in the studied systems are addressed by doping experiments. After the evaluation of the structure/property interdependence, a new optical excitation pathway is presented. An efficient photon low-energy up-conversion that sensitises the blue emission of poly(fluorene) is demonstrated. The observed phenomenon takes place in poly(fluorene) derivatives hosts doped with metallated octaethyl porphyrins, after quasi-CW photoexcitation of intensities in the order of kW/cm2. The up-conversion process is parameterised in terms of temperature, wavelength excitation and central metal cation in the porphyrin ring. Additionally the observation of the up-conversion is extended in a broad range of poly-p-phenylene blue light emitting hosts. The dependence of the detected up-conversion intensity on the excitation intensity and doping concentration is reported. Furthermore the dynamics of the up-conversion intensity are monitored as a function of the doping concentration. These experimental results strongly suggest the existence of triplet-triplet annihilation events into the porphyrin molecules that are subsequently followed by energy transfer to the host. After confirming the occurrence of the up-conversion in solutions, cyclic voltammetry is used in order to show that the up-conversion efficiency is partially determined from the energetic alignment between the HOMO levels of the host and the dopant.

Electronic energy transfer processes and charge carrier transport in pi-conjugated polymers

Conjugated polymers have attracted tremendous academical and industrial research interest over the past decades due to the appealing advantages that organic / polymeric materials offer for electronic applications and devices such as organic light emitting diodes (OLED), organic field effect transistors (OFET), organic solar cells (OSC), photodiodes and plastic lasers. The optimization of organic materials for applications in optoelectronic devices requires detailed knowledge of their photophysical properties, for instance energy levels of excited singlet and triplet states, excited state decay mechanisms and charge carrier mobilities. In the present work a variety of different conjugated (co)polymers, mainly polyspirobifluorene- and polyfluorene-type materials, was investigated using time-resolved photoluminescence spectroscopy in the picosecond to second time domain to study their elementary photophysical properties and to get a deeper insight into structure-property relationships. The experiments cover fluorescence spectroscopy using Streak Camera techniques as well as time-delayed gated detection techniques for the investigation of delayed fluorescence and phosphorescence. All measurements were performed on the solid state, i.e. thin polymer films and on diluted solutions. Starting from the elementary photophysical properties of conjugated polymers the experiments were extended to studies of singlet and triplet energy transfer processes in polymer blends, polymer-triplet emitter blends and copolymers. The phenomenon of photonenergy upconversion was investigated in blue light-emitting polymer matrices doped with metallated porphyrin derivatives supposing an bimolecular annihilation upconversion mechanism which could be experimentally verified on a series of copolymers. This mechanism allows for more efficient photonenergy upconversion than previously reported for polyfluorene derivatives. In addition to the above described spectroscopical experiments, amplified spontaneous emission (ASE) in thin film polymer waveguides was studied employing a fully-arylated poly(indenofluorene) as the gain medium. It was found that the material exhibits a very low threshold value for amplification of blue light combined with an excellent oxidative stability, which makes it interesting as active material for organic solid state lasers. Apart from spectroscopical experiments, transient photocurrent measurements on conjugated polymers were performed as well to elucidate the charge carrier mobility in the solid state, which is an important material parameter for device applications. A modified time-of-flight (TOF) technique using a charge carrier generation layer allowed to study hole transport in a series of spirobifluorene copolymers to unravel the structure-mobility relationship by comparison with the homopolymer. Not only the charge carrier mobility could be determined for the series of polymers but also field- and temperature-dependent measurements analyzed in the framework of the Gaussian disorder model showed that results coincide very well with the predictions of the model. Thus, the validity of the disorder concept for charge carrier transport in amorphous glassy materials could be verified for the investigated series of copolymers.

Quantum dot-dye hybrid systems for energy transfer applications

In this thesis, we focus on the preparation of energy transfer-based quantum dot (QD)-dye hybrid systems. Two kinds of QD-dye hybrid systems have been successfully synthesized: QD-silica-dye and QD-dye hybrid systems.rn rnIn the QD-silica-dye hybrid system, multishell CdSe/CdS/ZnS QDs were adsorbed onto monodisperse Stöber silica particles with an outer silica shell of thickness 2 - 24 nm containing organic dye molecules (Texas Red). The thickness of this dye layer has a strong effect on the total sensitized acceptor emission, which is explained by the increase in the number of dye molecules homogeneously distributed within the silica shell, in combination with an enhanced surface adsorption of QDs with increasing dye amount. Our conclusions were underlined by comparison of the experimental results with Monte-Carlo simulations, and by control experiments confirming attractive interactions between QDs and Texas Red freely dissolved in solution. rnrnNew QD-dye hybrid system consisting of multishell QDs and organic perylene dyes have been synthesized. We developed a versatile approach to assemble extraordinarily stable QD-dye hybrids, which uses dicarboxylate anchors to bind rylene dyes to QD. This system yields a good basis to study the energy transfer between QD and dye because of its simple and compact design: there is no third kind of molecule linking QD and dye; no spacer; and the affinity of the functional group to the QD surface is strong. The FRET signal was measured for these complexes as a function of both dye to QD ratio and center-to-center distance between QD and dye by controlling number of covered ZnS layers. Data showed that fluorescence resonance energy transfer (FRET) was the dominant mechanism of the energy transfer in our QD-dye hybrid system. FRET efficiency can be controlled by not only adjusting the number of dyes on the QD surface or the QD to dye distance, but also properly choosing different dye and QD components. Due to the strong stability, our QD-dye complexes can also be easily transferred into water. Our approach can apply to not only dye molecules but also other organic molecules. As an example, the QDs have been complexed with calixarene molecules and the QD-calixarene complexes also have potential for QD-based energy transfer study. rn

Novel porphyrin amino acids as building blocks for artificial photosynthetic reaction centers : photoinduced energy and electron transfer

This thesis reports on the synthesis and characterisation of trans-(M)AB2C meso-substituted porphyrin amino acid esters (PAr) (M = 2H or Zn) with tunable electron donating and electron withdrawing Ar substituents at B positions (Ar = 4-C6H4OnBu, 4-C6H4OMe, 2,4,6-C6H2Me3, 4-C6H4Me, C6H5, 4-C6H4F, 4-C6H4CF3, C6F5). These porphyrins were used as key building blocks for photosynthetic LHC (LHC = light-harvesting antenna complex) and RC (RC = reaction center) model compounds.rnBased on free-base or zinc(II) porphyrin amino acid esters and porphyrin acids several amide linked free-base bis(porphyrins) PAr1-PAr2 (Ar1 = 2,4,6-C6H2Me3, C6F5 and Ar2 = 2,4,6-C6H2Me3, 4-C6H4F, 4-C6H4CF3, C6F5), mono metallated bis(porphyrin) PAr1-(Zn)PAr2 (Ar1 = 2,4,6-C6H2Me3 and Ar2 =4-C6H4F) and its doubly zincated complexes (Zn)PAr1-(Zn)PAr2 were prepared. In the fluorescence spectra of free-base bis(porphyrins) the porphyrin with the strongest electron donating power of Ar substituents at B positions is the light emitting unity. The emission of mono metallated bis(porphyrin) occurs only from the free-base porphyrin building block. This phenomenon is caused by an efficient energy transfer likely via the Dexter through-bond mechanism.rnLinking of anthraquinone (Q) as electron acceptor (A) to the N-terminus of porphyrin amino acid esters ((M)PAr) and aminoferrocene (Fc) as electron donor (D) to the C-terminus of the porphyrin resulting in Q-(M)PAr-Fc triads (M = 2H or Zn, Ar = 4-C6H4OnBu, 4-C6H4OMe, 2,4,6-C6H2Me3, 4-C6H4Me, C6H5, 4-C6H4F, 4-C6H4CF3, C6F5) with tunable electron density at the porphyrin chromophore. In these triads initial oxidative PET (Q←(M)PAr) and reductive PET ((M)PAr→Fc) (PET = photoinduced electron transfer) are possible. Both processes leads to an emission quenching of (M)PAr. The efficiency of the PET pathways occurring in the Marcus normal region is controlled by the specific porphyrin electron density.rnAmide-linked conjugates PAr-Fc (Ar = 2,4,6-C6H2Me3, C6F5) and Fmoc-Fc-PAr1 (N-Fmoc-Fc = N-Fmoc protected 1,1’-ferrocene amino acid; Ar1 = C6H5, 4-C6H4F, 4-C6H4CF3, C6F5) as well as hinges PAr2-Fc-PAr1 (Ar1 = C6H5, 4-C6H4F and Ar2 = 2,4,6-C6H2Me3) were studied with respect to the reductive PET. The PET driving force (−GET) in dyads increases with the increasing electron withdrawing character of Ar substituents. Additionally, intramolecular energy transfer between porphyrins PAr1 and PAr2 is feasible in the hinges via the Förster mechanism.rn

Messung des Wirkungsquerschnitts der Reaktion d(e,e'p)n für fehlende Impulse bis 950 MeV/c und Trennung der longitudinalen und transversalen Reaktionsanteile für fehlende Impulse bis 350 MeV/c

Die Dreispektrometeranlage der A1-Kollaboration am MainzerElektronenbeschleuniger MAMI wurde im Rahmen dieser Arbeitverwendet, um die Elektrodisintegration des Deuteronsmit Hilfe der Reaktion d(e,e'p)n zu untersuchen. Im ersten Teil der Untersuchungen wurde die longitudinaleund transversale Strukturfunktion aus denWirkungsquerschnitten extrahiert. Die Zentralwerte derkinematischen Parameter waren dabei wie folgt eingestellt:1) Der Impulsübertrag wurde für alle Messungen auf 450 MeV/c festgelegt.2) Das Proton wurde in Richtung des Impulsübertrags nachgewiesen (parallele Kinematik).3) Vier Einstellungen des Energieübertrags, und damit korrespondierend des fehlenden Impulses, wurden gemessen: Energieübertrag / MeV : 128, 226, 289, 360. Fehlender Impuls / (MeV/c): 50, 200, 275, 350.4) Für jede dieser vier Kinematiken wurden mindestens drei verschiedene Einschußenergien bzw. Elektronenstreuwinkel eingestellt, um die Strukturfunktionen mit Hilfe der Rosenbluth-Separation zu bestimmen. Im zweiten Teil der Untersuchungen wurde derWirkungsquerschnitt für hohe fehlende Impulse bestimmt.Dessen Zentralwerte wurden von 30 MeV/c bis 906 MeV/cvariiert, wobei für die hohen fehlenden Impulse das Protonweit außerhalb der Richtung des Impulsübertragesnachzuweisen war. Der Energieübertrag lag dabei zwischen180 MeV und 600 MeV und der Impulsübertrag zwischen608 MeV/c und 698 MeV/c.

Biomimetisches Modell eines Photosystems aus dem pflanzlichen Photosyntheseapparat

In dieser Arbeit wurde ein biomimetisches Modell für ein pflanzliches Photosystem bestehend aus dem rekombinanten Hauptlichtsammlerkomplex (LHCII) als Absorptions- und Energietransfereinheit und einem N-terminal an das Protein gebundenen Farbstoff als Energieakzeptor hergestellt. Mehrere LHCII-Farbstoff-Konstrukte wurden getestet, die höchste Energietransfereffizienz von komplexgebundenem Chlorophyll-a zum Energieakzeptor konnte an einem LHCII-Benzoylterrylendicarboximid-Konstrukt gemessen werden. Bei Raumtemperatur wurde hier 70% der Chlorophyll-a-Anregungsenergie auf den Farbstoff übertragen, bei 77 K sogar 85%. LHCII-Farbstoffkonstrukte können helfen, strukturelle und funktionelle Eigenschaften des LHCII näher zu beleuchten. So konnte bereits in dieser Arbeit gezeigt werden, daß der N-Terminus des Komplexes im zeitlichen Mittel in eine größere Annäherung zum pigmentierten Teil des LHCII kommen muß, sonst sind Energietransfereffizienzen obiger Größenordnung nicht möglich. Weitere Erkenntnisse werden von einzelmolekülspektroskopischen Untersuchungen erwartet. Voraussetzung hierfür ist jedoch eine orientierte Immobilisierung des LHCII auf einer Glasoberfläche. Es gelang, den Komplex über eine auf molekularer Ebene eingeführte Aminosäuresequenz aus sechs Histidinen an die Nickelchelatgruppe einer auf Glas immobilisierten Meerrettich-Peroxidase zu binden. Einzelmolekülspektroskopisch konnte eine LHCII-Immobilisation senkrecht zur Proteinsymmetrieachse nachgewiesen werden. Mittelfristig wird angestrebt, LHCII-Farbstoffkonstrukte auch für photovoltaische Anwendungen nutzbar zu machen. Ein erster Meilenstein wurde in dieser Arbeit erreicht, indem es gelang, LHCII an Titandioxid, Halbleiter der sog. Grätzelzelle, zu binden.

Liquid crystalline oligofluorenes and their derivatives

Homo-oligofluorenes (OFn), polyfluorenes (PF2/6) and oligofluorenes with one fluorenenone group in the center (OFnK) were synthesized. They were used as model compounds to understand of the structure-property relationships of polyfluorenes and the origin of the green emission in the photoluminescence (after photooxidation of the PFs) and the electroluminescence (EL) spectra. The electronic, electrochemical properties, thermal behavior, supramolecular self-assembly, and photophysical properties of OFn, PF2/6 and OFnK were investigated. Oligofluorenes with 2-ethylhexyl side chain (OF2-OF7) from the dimer up to the heptamer were prepared by a series of stepwise transition metal mediated Suzuki and Yamamoto coupling reactions. Polyfluorene was synthesized by Yamamoto coupling of 2,7-dibromo-9,9-bis(2-ethylhexyl)fluorene. Oligofluorenes with one fluorenone group in the center (OF3K, OF5K, OF7K) were prepared by Suzuki coupling between the monoboronic fluorenyl monomer, dimer, trimer and 2, 7-dibromofluorenone. The electrochemical and electronic properties of homo-oligofluorenes (OFn) were systematically studied by several combined techniques such as cyclic voltammetry, differential pulse voltammetry, UV-vis absorption spectroscopy, steady and time-resolved fluorescence spectroscopy. It was found that the oligofluorenes behave like classical conjugated oligomers, i.e., with the increase of the chain-length, the corresponding oxidation potential, the absorption and emission maximum, ionization potential, electron affinity, band gap and the photoluminescence lifetime displayed a very good linear relation with the reciprocal number of the fluorene units (1/n). The extrapolation of these linear relations to infinite chain length predicted the electrochemical and electronic properties of the corresponding polyfluorenes. The thermal behavior, single-crystal structure and supramolecular packing, alignment properties, and molecular dynamics of the homo-oligofluorenes (OFn) up to the polymer were studied using techniques such as TGA, DSC, WAXS, POM and DS. The OFn from tetramer to heptamer show a smectic liquid crystalline phase with clearly defined isotropization temperature. The oligomers do show a glass transition which exhibits n-1 dependence and allows extrapolation to a hypothetical glass transition of the polymer at around 64 °C. A smectic packing and helix-like conformation for the oligofluorenes from tetramer to heptamer was supported by WAXS experiments, simulation, and single-crystal structure of some oligofluorene derivatives. Oligofluorenes were aligned more easily than the corresponding polymer, and the alignability increased with the molecular length from tetramer to heptamer. The molecular dynamics in a series of oligofluorenes up to the polymer was studied using dielectric spectroscopy. The photophysical properties of OFn and PF2/6 were investigated by the steady-state spectra (UV-vis absorption and fluorescence spectra) and time-resolved fluorescence spectra both in solution and thin film. The time-resolved fluorescence spectra of the oligofluorenes were measured by streak camera and gate detection technique. The lifetime of the oligofluorenes decreased with the extension of the chain-length. No green emission was observed in CW, prompt and delayed fluorescence for oligofluorenes in m-THF and film at RT and 77K. Phosphorescence was observed for oligofluorenes in frozen dilute m-THF solution at 77K and its lifetime increased with length of oligofluorenes. A linear relation was obtained for triplet energy and singlet energy as a function of the reciprocal degree of polymerization, and the singlet-triplet energy gap (S1-T1) was found to decrease with the increase of degree of polymerization. Oligofluorenes with one fluorenone unit at the center were used as model compounds to understand the origin of the low-energy (“green”) emission band in the photoluminescence and electroluminescence spectra of polyfluorenes. Their electrochemical properties were investigated by CV, and the ionization potential (Ip) and electron affinity (Ea) were calculated from the onset of oxidation and reduction of OFnK. The photophysical properties of OFnK were studied in dilute solution and thin film by steady-state spectra and time-resolved fluorescence spectra. A strong green emission accompanied with a weak blue emission were obtained in solution and only green emission was observed on film. The strong green emission of OFnK suggested that rapid energy transfer takes place from higher energy sites (fluorene segments) to lower energy sites (fluorenone unit) prior to the radiative decay of the excited species. The fluorescence spectra of OFnK also showed solvatochromism. Monoexponential decay behaviour was observed by time-resolved fluorescence measurements. In addition, the site-selective excitation and concentration dependence of the fluorescence spectra were investigated. The ratio of green and blue emission band intensities increases with the increase of the concentration. The observed strong concentration dependence of the green emission band in solution suggests that increased interchain interactions among the fluorenone-containing oligofluorene chain enhanced the emission from the fluorenone defects at higher concentration. On the other hand, the mono-exponential decay behaviour and power dependence were not influenced significantly by the concentration. We have ruled out the possibility that the green emission band originates from aggregates or excimer formation. Energy transfer was further investigated using a model system of a polyfluorene doped by OFnK. Förster-type energy transfer took place from PF2/6 to OFnK, and the energy transfer efficiency increased with increasing of the concentration of OFnK. Efficient funneling of excitation energy from the high-energy fluorene segments to the low-energy fluorenone defects results from energy migration by hopping of excitations along a single polymer chain until they are trapped on the fluorenone defects on that chain or transferred onto neighbouring chains by Förster-type interchain energy transfer process. These results imply that the red-shifted emission in polyfluorenes can originate from (usually undesirable) keto groups at the bridging carbon atoms-especially if the samples have been subject to photo- or electro-oxidation or if fluorenone units are present due to an improper purification of the monomers prior to polymerization.

Temperaturabhängige Fluoreszenzdynamik einzelner Halbleiternanokristalle

In der vorliegenden Arbeit wurde die Fluoreszenzdynamik einzelner CdSe-Halbleiternanokristalle und isolierter Nanokristall/Farbstoff-Komplexe untersucht. Dazu wurde ein konfokales Mikros­kop aufgebaut, mit dem Spektren und Zerfallskurven einzelner Fluorophore bei Raumtemperatur und tiefen Temperaturen bis zu 1.4 Kelvin gemessen werden konnten. Mit diesem Aufbau konnten erstmals Fluoreszenz­lebenszeiten einzelner Nanokristalle mit der Methode des zeit­korre­lierten Einze­lphotonen­zählens (timecorrelated single photon counting, TCSPC) bei Raumtemperatur und später auch bei tiefen Temperaturen bestimmt werden. Zur Auswertung der Daten wurden verschiedene Methoden entwickelt, um die Fluoreszenzdynamik aus den exponentiellen oder nicht-exponentiellen Zerfallskurven zu extrahieren. Die Interpretation der berechneten Ratenverteilung lässt auf eine Korrelation zwischen der Fluoreszenzintensität und der Fluoreszenzlebensdauer schließen, deren Ursache auf Quenchermoleküle zurückgeführt wird. Mit geringer werdender Fluoreszenzintensität zerfallen die Abkling­kurven schneller und die Lebensdauern sind breiter verteilt. Messungen bei tiefen Temperaturen ermöglichte es zusätzlich die exzitonische Feinstruktur des Nanokristalls genauer zu Untersuchen. Hier zeigt sich eine deutliche Unterscheidung zwischen einer langsamen, temperaturabhängigen Zerfallskomponente (mit Zerfalssraten bis in den Mikrosekundenbereich) und einer schnellen, temperaturunabhängigen Zerfallsrate. Die gemessenen Ratenverteilungen bestätigten die berechneten theoretischen Zerfallsraten, jedoch auch weitere, mit bisherigen theoretischen Modellen nicht vereinbare, Raten. Schließlich wurden noch der Energietransfer zwischen Nanokristall-Farbstoffmolekül-Komplexen untersucht. Gemessene Abklingkurven der Nano­kristall-Komponente bei 2 Kelvin wiesen gegenüber dem isolierten Nanokristall keine entsprechenden langsamen Zerfallsraten auf.

Systematic studies of protein immobilization by surface plasmon field-enhanced fluorescence spectroscopy

The research interest of this study is to investigate surface immobilization strategies for proteins and other biomolecules by the surface plasmon field-enhanced fluorescence spectroscopy (SPFS) technique. The recrystallization features of the S-layer proteins and the possibility of combining the S-layer lattice arrays with other functional molecules make this protein a prime candidate for supramolecular architectures. The recrystallization behavior on gold or on the secondary cell wall polymer (SCWP) was recorded by SPR. The optical thicknesses and surface densities for different protein layers were calculated. In DNA hybridization tests performed in order to discriminate different mismatches, recombinant S-layer-streptavidin fusion protein matrices showed their potential for new microarrays. Moreover, SCWPs coated gold chips, covered with a controlled and oriented assembly of S-layer fusion proteins, represent an even more sensitive fluorescence testing platform. Additionally, S-layer fusion proteins as the matrix for LHCII immobilization strongly demonstrate superiority over routine approaches, proving the possibility of utilizing them as a new strategy for biomolecular coupling. In the study of the SPFS hCG immunoassay, the biophysical and immunological characteristics of this glycoprotein hormone were presented first. After the investigation of the effect of the biotin thiol dilution on the coupling efficiently, the interfacial binding model including the appropriate binary SAM structure and the versatile streptavidin-biotin interaction was chosen as the basic supramolecular architecture for the fabrication of a SPFS-based immunoassay. Next, the affinity characteristics between different antibodies and hCG were measured via an equilibrium binding analysis, which is the first example for the titration of such a high affinity interaction by SPFS. The results agree very well with the constants derived from the literature. Finally, a sandwich assay and a competitive assay were selected as templates for SPFS-based hCG detection, and an excellent LOD of 0.15 mIU/ml was attained via the “one step” sandwich method. Such high sensitivity not only fulfills clinical requirements, but is also better than most other biosensors. Fully understanding how LHCII complexes transfer the sunlight energy directionally and efficiently to the reaction center is potentially useful for constructing biomimetic devices as solar cells. After the introduction of the structural and the spectroscopic features of LHCII, different surface immobilization strategies of LHCII were summarized next. Among them the strategy based on the His-tag and the immobilized metal (ion) affinity chromatography (IMAC) technique were of great interest and resulted in different kinds of home-fabricated His-tag chelating chips. Their substantial protein coupling capacity, maintenance of high biological activity and a remarkably repeatable binding ability on the same chip after regeneration was demonstrated. Moreover, different parameters related to the stability of surface coupled reconstituted complexes, including sucrose, detergent, lipid, oligomerization, temperature and circulation rate, were evaluated in order to standardize the most effective immobilization conditions. In addition, partial lipid bilayers obtained from LHCII contained proteo-liposomes fusion on the surface were observed by the QCM technique. Finally, the inter-complex energy transfer between neighboring LHCIIs on a gold protected silver surface by excitation with a blue laser (λ = 473nm) was recorded for the first time, and the factors influencing the energy transfer efficiency were evaluated.

Einzelmolekülspektroskopische Studien an Farbstoff-markierten Chlorophyll-a/b-Lichtsammlerkomplexen und Untersuchungen zur Integration der Komplexe in elektrochemische Solarzellen

Die zentrale Funktion des Hauptlichtsammlerkomplexes des Photosystems II, LHCII, besteht in der Absorption von Sonnenlicht und der Bereitstellung von Energie für die photosynthetische Ladungstrennung im Reaktionszentrum des Photosystems. Auch in der Regulation der Photosynthese spielt der LHCII eine wichtige Rolle, da die Energieverteilung zwischen Photosystem I und Photosystem II im Rahmen des sog. „State Transition“-Prozesses über die Verteilung der Lichtsammlerkomplexe zwischen den beiden Photosystemen gesteuert wird. Im Blickfeld des ersten Teils dieser Arbeit stand die konformative Dynamik der N-terminalen Domäne des LHCII, die wahrscheinlich in die Regulation der Lichtsammlung involviert ist. Gemeinsam mit Mitarbeitern des 3. Physikalischen Instituts der Universität Stuttgart wurde an der Etablierung einer Methode zur einzelmolekülspektroskopischen Untersuchung der Dynamik des N-Terminus gearbeitet. Als Messgröße diente der Energietransfer zwischen einem Fluoreszenzfarbstoff, der an die N-terminale Domäne gekoppelt war, und den Chlorophyllen des Komplexes. Die Funktion des LHCII als effiziente Lichtantenne bildete die Grundlage für den zweiten Teil dieser Arbeit. Hier wurde untersucht, in wie weit LHCII als Lichtsammler in eine elektrochemische Solarzelle integriert werden kann. In der potentiellen Solarzelle sollte die Anregungsenergie des LHCII auf Akzeptorfarbstoffe übertragen werden, die in der Folge Elektronen in das Leitungsband einer aus Titandioxid oder Zinndioxid bestehenden porösen Halbleiterelektrode injizierten, auf der Komplexe und Farbstoffe immobilisiert waren.

1-, 2- and 3-dimensional phenylene-based materials for optoelectronic applications

A series of oligo-phenylene dendronised conjugated polymers was prepared. The divergent synthetic approach adopted allowed for the facile synthesis of a range of dendronised monomers from a common intermediate, e.g. first and second generation fluorene. Only the polymerisation of the first generation and alkylarylamine substituted dendronised fluorene monomers yielded high molecular weight materials, attributed to the low solubility of the remaining dendronised monomers. The alkylarylamine substituted dendronised poly(fluorene) was incorporated into an organic light emitting diode (OLED) and exhibited an increased colour stability in air compared to other poly(fluorenes). The concept of dendronisation was extended to poly(fluorenone), a previously insoluble material. The synthesis of the first soluble poly(fluorenone) was achieved by the incorporation of oligo-phenylene dendrons at the 4-position of fluorenone. The dendronisation of fluorenone allowed for a polymer with an Mn of 4.1 x 104 gmol-1 to be prepared. Cyclic voltammetry of the dendronised poly(fluorenone) showed that the electron affinity of the polymer was high and that the polymer is a promising n-type material. A dimer and trimer of indenofluorene (IF) were prepared from the monobromo IF. These oligomers were investigated by 2-dimensional wide angle x-ray spectroscopy (2D-WAXS), polarised optical microscopy (POM) and dielectric spectroscopy, and found to form highly ordered smetic phases. By attaching perylene dye as the end-capper on the IF oligomers, molecules that exhibited efficient Förster energy transfer were obtained. Indenofluorene monoketone, a potential defect structure for IF based OLED’s, was synthesised. The synthesis of this model defect structure allowed for the long wavelength emission in OLED’s to be identified as ketone defects. The long wavelength emission from the indenofluorene monoketone was found to be concentration dependent, and suggests that aggregate formation is occurring. An IF linked hexa-peri-hexabenzocoronene (HBC) dimer was synthesised. The 2D-WAXS images of this HBC dimer demonstrate that the molecule exhibits intercolumnar organisation perpendicular to the extrusion direction. POM images of mixtures of the HBC dimer mixed with an HBC with a low isotropic temperature demonstrated that the HBC dimer is mixing with the isotropic HBC.

Synthese und Photochemie von Dendrimeren mit stilbenoiden Chromophoren

Dendrimere spielen als strukturtreue Nanopartikel eine herausragende Rolle. Ziel dieser Arbeit war, Dendrimere mit einer hohen Dichte an photoaktiven Chromophoren herzu-stellen und zu untersuchen. Dazu wurden die terminalen Aminogruppen von Poly(propylenimin)dendrimeren 1. und 2. Generation, Astramol DAB-Am-4R und DAB-Am-8R, mit Stilbenen und Styrylstilbenen als Chromophor verknüpft. Mittels Wittig-Horner- und Heck-Reaktion wurden (E)-Stilbene aufgebaut, die auf der einen Seite drei Propoxygruppen zur Verbesserung der Löslichkeit und auf der anderen Seite eine passende Funktionalität zur Verknüpfung mit dem dendritischen Core tragen. Als Verknüpfungsmethoden wurden die Verknüpfung als Amid (PSDA), Schiffsche Base (PSDS) und Harnstoff (PSDH) getestet. Die Schiffschen Basen wurden außerdem zur Erhöhung der Hydrolysestabilität zum sekundären Amin reduziert (PSDR und PQDR). Durch die Verknüpfung mit dem Core werden die stilbenoiden Chromophore sehr stark photoaktiviert. Das beruht auf einem Singulett-Energietransfer (Förster-Mechanismus) von Chromophor zu Chromophor. Dieser Prozeß konkurriert zu den Deaktivierungsprozessen, verlängert die mittlere S1-Lebensdauer und erhöht somit die Chancen der Photochemie. Der Styrylstilben-Chromophor hat darüber hinaus einen erheblichen Teil seiner UV-Absorbtion bereits im Tageslicht und photopolymerisiert daher bereits im Tageslicht. Vor allem bei den Dendrimeren 2. Generation stellte sich die Frage nach der vollständigen, d.h. achtfachen Umsetzung; das Core sollte als Knäuel vorliegen, die Arme zum Teil nach innen gefaltet und somit dem Reaktand nur bedingt zugänglich. Auch dort konnten unter optimierten Reaktionsbedingungen alle Aminogruppen umgesetzt werden. Die vollständige Umsetzung der Dendrimere wurde mittels NMR und massenspektroskopischen Methoden untersucht. Bei den Absorptionsspektren der Dendrimere 1. Generation ändert sich die Lage der Maxima je nach Art der Verknüpfung der Chromophore mit dem Core. Die Verlängerung des Chromophors um eine Styryleinheit bedingt eine beträchtliche Rotverschiebung. Die Lage der Emissionsmaxima differiert stärker als die Lage der Absorptionsmaxima. Den geringsten Stokes-Shift weist der Harnstoff auf, dann folgt das sekundäre Amin, dann die Schiffsche Base. Dies weist auf unterschiedlich relaxierte S1-Geometrien hin. Die Verbindungen PSDS1, PSDR1 und PSDH1 aus 3,4,5-Tripropoxystilbeneinheit und Astramol-Core 1. Generation DAB-Am-4 wurden in einer Konzentration von 10-5 mol/L belichtet. Der vollständige Photoabbau durch Belichtung in Chloroform mit einer Xenon-Lampe erfolgte ohne jeglichen Filter innerhalb von zehn Minuten (PSDH1), 20 Minuten (PSDR1) und einer Stunde (PSDS1). Allen drei Verbindungen gemeinsam ist das Entstehen eines intermediären neuen Maximums geringer Intensität, das um etwa 100 nm bathochrom verschoben ist. Das Harnstoffsystem weist außerdem ein weiteres intermediäres Maximum bei 614 nm auf. Diese Maxima können (laut früherer Untersuchungen) durch Oxidation entstandenen chinoiden Strukturen zugeordnet werden, deren Lebensdauer (im Sekundenbereich) zu kurz für eine NMR-Charakterisierung ist. PSDR1 wurde außerdem bei höheren Konzentrationen (10-4 und 10-3 mol/L) mit einer Quecksilberlampe mit Pyrex-Filter (lambda > 300 nm) belichtet. Dabei wird, wie erwartet, eine Verbreiterung der NMR-Signale beobachtet. Es bildet sich zunächst cis-Stilben. Außerdem läßt sich bei 4.3 ppm ein Signal beobachten, das von inter- oder intramolekular gebildeten Methinprotonen herrührt. Auch wenn laut MOPAC- und Kraftfeldrechnung die Doppelbindungen ungünstig für eine [pi2s + pi2s]-Cyclodimerisierung zueinander stehen, kann im photochemisch angeregten Zustand eine Geometrie vorherrschen, die die intramolekulare Kopf-Kopf-Cyclobutanbildung ermöglicht. Die massenspektrometrischen Untersuchungen der Belichtungsprodukte (FD, ESI, MALDI-TOF) zeigen als höchste Masse lediglich das Monomer. Allerdings kann dadurch nicht auf eine rein intramolekulare Reaktion geschlossen werden. Die fortschreitende statistische CC-Verknüpfung kann schnell zu vernetzten Nanopartikeln führen, die im Massenspektrometer nicht fliegen. Die NMR-Spektren der mit zunehmender Vernetzung immer schlechter löslich werdenden Teilchen belegen die Oligomerisierung.

Synthesis and surface modification of semiconductor nanocrystals

The last decade has witnessed an exponential growth of activities in the field of nanoscience and nanotechnology worldwide, driven both by the excitement of understanding new science and by the potential hope for applications and economic impacts. The largest activity in this field up to date has been in the synthesis and characterization of new materials consisting of particles with dimensions in the order of a few nanometers, so-called nanocrystalline materials. [1-8] Semiconductor nanomaterials such as III/V or II/VI compound semiconductors exhibit strong quantum confinement behavior in the size range from 1 to 10 nm. Therefore, preparation of high quality semiconductor nanocrystals has been a challenge for synthetic chemists, leading to the recent rapid progress in delivering a wide variety of semiconducting nanomaterials. Semiconductor nanocrystals, also called quantum dots, possess physical properties distinctly different from those of the bulk material. Typically, in the size range from 1 to 10 nm, when the particle size is changed, the band gap between the valence and the conduction band will change, too. In a simple approximation a particle in a box model has been used to describe the phenomenon[9]: at nanoscale dimensions the degenerate energy states of a semiconductor separate into discrete states and the system behaves like one big molecule. The size-dependent transformation of the energy levels of the particles is called “quantum size-effect”. Quantum confinement of both the electron and hole in all three dimensions leads to an increase in the effective bandgap of the material with decreasing crystallite size. Consequently, both the optical absorption and emission of semiconductor nanaocrystals shift to the blue (higher energies) as the size of the particles gets smaller. This color tuning is well documented for CdSe nanocrystals whose absorption and emission covers almost the whole visible spectral range. As particle sizes become smaller the ratio of surface atoms to those in the interior increases, which has a strong impact on particle properties, too. Prominent examples are the low melting point [8] and size/shape dependent pressure resistance [10] of semiconductor nanocrystals. Given the size dependence of particle properties, chemists and material scientists now have the unique opportunity to change the electronic and chemical properties of a material by simply controlling the particle size. In particular, CdSe nanocrystals have been widely investigated. Mainly due to their size-dependent optoelectronic properties [11, 12] and flexible chemical processibility [13], they have played a distinguished role for a number of seminal studies [11, 12, 14, 15]. Potential technical applications have been discussed, too. [8, 16-27] Improvement of the optoelectronic properties of semiconductor nanocrystals is still a prominent research topic. One of the most important approaches is fabricating composite type-I core-shell structures which exhibit improved properties, making them attractive from both a fundamental and a practical point of view. Overcoating of nanocrystallites with higher band gap inorganic materials has been shown to increase the photoluminescence quantum yields by eliminating surface nonradiative recombination sites. [28] Particles passivated with inorganic shells are more robust than nanocrystals covered by organic ligands only and have greater tolerance to processing conditions necessary for incorporation into solid state structures or for other applications. Some examples of core-shell nanocrystals reported earlier include CdS on CdSe [29], CdSe on CdS, [30], ZnS on CdS, [31] ZnS on CdSe[28, 32], ZnSe on CdSe [33] and CdS/HgS/CdS [34]. The characterization and preparation of a new core-shell structure, CdSe nanocrystals overcoated by different shells (CdS, ZnS), is presented in chapter 4. Type-I core-shell structures as mentioned above greatly improve the photoluminescence quantum yield and chemical and photochemical stability of nanocrystals. The emission wavelengths of type-I core/shell nanocrystals typically only shows a small red-shift when compared to the plain core nanocrystals. [30, 31, 35] In contrast to type-I core-shell nanocrystals, only few studies have been conducted on colloidal type-II core/shell structures [36-38] which are characterized by a staggered alignment of conduction and valence bands giving rise to a broad tunability of absorption and emission wavelengths, as was shown for CdTe/CdSe core-shell nanocrystals. [36] The emission of type-II core/shell nanocrystals mainly originates from the radiative recombination of electron-hole pairs across the core-shell interface leading to a long photoluminescence lifetime. Type-II core/shell nanocrystals are promising with respect to photoconduction or photovoltaic applications as has been discussed in the literature.[39] Novel type-II core-shell structures with ZnTe cores are reported in chapter 5. The recent progress in the shape control of semiconductor nanocrystals opens new fields of applications. For instance, rod shaped CdSe nanocrystals can enhance the photo-electro conversion efficiency of photovoltaic cells, [40, 41] and also allow for polarized emission in light emitting diodes. [42, 43] Shape control of anisotropic nanocrystals can be achieved by the use of surfactants, [44, 45] regular or inverse micelles as regulating agents, [46, 47] electrochemical processes, [48] template-assisted [49, 50] and solution-liquid-solution (SLS) growth mechnism. [51-53] Recently, formation of various CdSe nanocrystal shapes has been reported by the groups of Alivisatos [54] and Peng, [55] respectively. Furthermore, it has been reported by the group of Prasad [56] that noble metal nanoparticles can induce anisotropic growth of CdSe nanocrystals at lower temperatures than typically used in other methods for preparing anisotropic CdSe structures. Although several approaches for anisotropic crystal growth have been reported by now, developing new synthetic methods for the shape control of colloidal semiconductor nanocrystals remains an important goal. Accordingly, we have attempted to utilize a crystal phase control approach for the controllable synthesis of colloidal ZnE/CdSe (E = S, Se, Te) heterostructures in a variety of morphologies. The complex heterostructures obtained are presented in chapter 6. The unique optical properties of nanocrystals make them appealing as in vivo and in vitro fluorophores in a variety of biological and chemical investigations, in which traditional fluorescence labels based on organic molecules fall short of providing long-term stability and simultaneous detection of multiple emission colours [References]. The ability to prepare water soluble nanocrystals with high stability and quantum yield has led to promising applications in cellular labeling, [57, 58] deep-tissue imaging, [59, 60] and assay labeling [61, 62]. Furthermore, appropriately solubilized nanocrystals have been used as donors in fluorescence resonance energy transfer (FRET) couples. [63-65] Despite recent progress, much work still needs to be done to achieve reproducible and robust surface functionalization and develop flexible (bio-) conjugation techniques. Based on multi-shell CdSe nanocrystals, several new solubilization and ligand exchange protocols have been developed which are presented in chapter 7. The organization of this thesis is as follows: A short overview describing synthesis and properties of CdSe nanocrystals is given in chapter 2. Chapter 3 is the experimental part providing some background information about the optical and analytical methods used in this thesis. The following chapters report the results of this work: synthesis and characterization of type-I multi-shell and type-II core/shell nanocrystals are described in chapter 4 and chapter 5, respectively. In chapter 6, a high–yield synthesis of various CdSe architectures by crystal phase control is reported. Experiments about surface modification of nanocrystals are described in chapter 7. At last, a short summary of the results is given in chapter 8.

Multichromophore Systeme auf Basis von Rylencarbonsäureimiden

Die Leistung multichromophorer Systeme geht oftmals über die der einzelnen Chromophor-Einheiten hinaus. Ziel der vorliegenden Dissertation mit dem Titel „Multichromophore Systeme auf Basis von Rylencarbonsäureimiden“ war daher die Synthese und Charakterisierung multichromophorer Molekülarchitekturen. Die verwendeten Rylenfarbstoffe zeichnen sich durch hohe photochemische Stabilitäten sowie nahezu quantitative Fluoreszenzquantenausbeuten aus. Die optischen und elektronischen Eigenschaften multichromophorer Systeme hängen stark von der geometrischen Ordnung ab, in der die Farbstoffe zueinander stehen. Daher wurden für den Einbau formpersistente Gerüststrukturen gewählt. Der erste Teil der Arbeit beschäftigt sich mit dem Einbau ein und desselben Chromophortyps und hat neben dem Verständnis von Chromophor-Wechselwirkungen vor allem die Erhöhung des Absorptionsquerschnitts und der Fluoreszenzintensität zum Ziel. Als Gerüststruktur dienen dabei Polyphenylen-Dendrimere, Ethinyl-verbrückte Dendrimere sowie Übergangsmetall-vermittelte supramolekulare Strukturen. Aufgrund der hohen Farbstoffanzahl, des ortsdefinierten Einbaus und den hohen Fluoreszenzquantenausbeuten eignen sich diese multichromophoren Systeme als Fluoreszenzsonden und als Einzelphotonenemitter. Im zweiten Teil der Arbeit werden verschiedene Chromophortypen zu multichromophoren Systemen verknüpft, mit deren Hilfe ein vektorieller Energietransfer möglich ist. Mit Hinsicht auf die Verwendung in photovoltaischen Zellen wurde eine dendritische Triade dargestellt. Eine lineare Variante einer Rylen-Triade stellt einen molekularen Draht dar, deren Brückenelement durch eine geeignete Syntheseführung verlängert und der Energietransport daher abstandsabhängig untersucht werden kann.

Identifizierung und Charakterisierung von Interaktionspartnern des synaptischen Vesikelproteins Synaptophysin

Die neuronale Signalübertragung beruht auf dem synaptischen Vesikelzyklus, der durch das koordinierte Zusammenspiel von circa 400 verschiedenen Proteinen reguliert wird. Eines der Hauptproteine des synaptischen Vesikels ist Synaptophysin (SYP), das zu den tetraspan vesicle membrane proteins (TVPs) gehört. Es wird vermutet, dass es zahlreiche Funktionen der Exo- und Endozytose moduliert, wenngleich die zugrunde liegenden molekularen Mechanismen bisher größtenteils unverstanden sind. Ziel der Arbeit war daher die Identifizierung von Interaktionspartnern von SYP, um zum Verständnis der vielen ungeklärten Prozesse im synaptischen Vesikelzyklus beizutragen. Mit dem Split-Ubiquitin Yeast Two-Hybrid System, das eine direkte in vivo Interaktion von Membranproteinen erlaubt, konnten in der vorliegenden Arbeit bekannte, aber auch neue SYP-Bindungspartner identifiziert werden. Ein bekannter Interaktionspartner war Synaptobrevin2 (SYB2), das zu den stärksten im Split-Ubiquitin Y2H System identifizierten Bindeproteinen zählt. Zu den neuen starken SYP-Interaktionspartnern gehören die TVPs Synaptogyrin3 (SYNGR3) und SCAMP1. Somit konnten erstmals heterophile Interaktionen zwischen den verschiedenen TVP-Genfamilien nachgewiesen werden, die für eine universelle Funktion der TVPs sprechen. Die Validierung der im Split-Ubiquitin Y2H System ermittelten Interaktionspartner wurde auf eine Auswahl von Proteinen beschränkt, die vermutlich am synaptischen Vesikelzyklus beteiligt sind. Dabei konnte eine immunhistologische Kolokalisierung von SYP mit SYB2, SYNGR3, SCAMP1, Stathmin-like3 (STMN3), Rho family GTPase2 (RND2), Phospholipid transfer protein, Vesicle transport through interaction with t-SNAREs 1B homolog, Arfaptin2 und Profilin1 in den Synapsen-reichen Schichten der Retina beobachtet werden. Die SYP/SYB2- und SYP/SYNGR3-Komplexe konnten zudem sowohl aus Synaptosomen-Lysat als auch aus cDNA-transfizierten Epithelzellen koimmunpräzipitiert werden, wohingegen dies für die anderen Interaktionspartner nicht gelang. Da Koimmunpräzipitation die Struktur der Proteine durch Solubilisierung mit Detergenzien beeinflusst, wurden die in der Hefe beobachteten Interaktionen noch mittels Fluoreszenz-Resonanz-Energie-Transfer überprüft, mit dem Proteinwechselwirkungen in der nativen Umgebung nachgewiesen werden können. Ein positives FRET-Signal konnte für SYP mit SYB2, SYP, SYNGR3, SCAMP1, STMN3, RND2 und Arfaptin2 detektiert werden, lediglich für SYP mit Phospholipase D4 (PLD4) gelang dieser Nachweis nicht. Ferner zeigten FRET-Analysen von Synaptophysin-Mutanten, dass der zytoplasmatische C-Terminus für die Interaktion mit zytoplasmatischen und membranassoziierten Proteinen benötigt wird. Durch in vivo FRET-Studien mit der SH2-Domäne der Src-Kinase, die an phosphorylierte Tyrosine bindet, konnte eine Tyrosin-Phosphorylierung des zytoplasmatischen C-Terminus von Synaptophysin und von Synaptogyrin3 detektiert werden. Viele der neu identifizierten Synaptophysin-Interaktionspartner sind im Lipid-Metabolismus involviert. Vermutlich rekrutiert der zytoplasmatische und durch Phosphorylierung modifizierbare C-Terminus diese Partner in spezifische Lipoproteindomänen, die an der Feinabstimmung der synaptischen Vesikelendo- und -exozytose beteiligt sind.