A software development process model for gesture-based interface

Gesture-based applications have particularities, since users interact in a natural way, much as they interact in the non-digital world. Hence, new requirements are needed on the software design process. This paper shows a software development process model for these applications, including requirement specification, design, implementation, and testing procedures. The steps and activities of the proposed model were tested through a game case study, which is a puzzle game. The puzzle is completed when all pieces of a painting are correctly positioned by the drag and drop action of users hand gesture. It also shows the results obtained of applying a heuristic evaluation on this game. © 2012 IEEE.

Heat transfer in fixed bed: a model non-linearity approach

Studies have been carried out on the heat transfer in a packed bed of glass beads percolated by air at moderate flow rates. Rigorous statistic analysis of the experimental data was carried out and the traditional two parameter model was used to represent them. The parameters estimated were the effective radial thermal conductivity, k, and the wall coefficient, h, through the least squares method. The results were evaluated as to the boundary bed inlet temperature, T-o, number of terms of the solution series and number of experimental points used in the estimate. Results indicated that a small difference in T-o was sufficient to promote great modifications in the estimated parameters and in the statistical properties of the model. The use of replicas at points of high parametric information of the model improved the results, although analysis of the residuals has resulted in the rejection of this alternative. In order to evaluate cion-linearity of the model, Bates and Watts (1988) curvature measurements and the Box (1971) biases of the coefficients were calculated. The intrinsic curvatures of the model (IN) tend to be concentrated at low bed heights and those due to parameter effects (PE) are spread all over the bed. The Box biases indicated both parameters as responsible for the curvatures PE, h being somewhat more problematic. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

Ontologia empresarial do modelo de referência MPS para software (MR-MPS-SW) com foco nos níveis G e F

Pós-graduação em Ciência da Computação - IBILCE

Apoio à maturidade pessoal visando a melhoria dos projetos de software

Pós-graduação em Ciência da Computação - IBILCE

Estimativa da radiação solar global diária em função do potencial de energia solar na superfície do solo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Model for determining flow diameter and economic velocity in water elevating systems

The purpose of this paper was to develop a model for calculating the economical flow diameter and velocity, by obtaining the economical diameter, using Swamee's friction factor equation, by minimizing the total annual cost. The application of the model to a regular supply condition showed that the diameter of the actual condition, 250 mm, compared with the diameter calculated by the mode, at the same tariff as that applied to the property ( ground), 284.1 mm, involved the necessity to generate, transmit, and distribute extra electrical energy, due to the higher load loss caused by the original diameter, approximately 30800 kWh/year. This means that in one year, the consumer would spend R$2,804.00 more on pumping cost alone.

Definição de requisitos de software baseada numa arquitetura de modelagem de negócios

Não é uma tarefa fácil definir requisitos para os sistemas de software que darão suporte a um negócio, dada a dinâmica de mudanças nos processos. O levantamento de requisitos tem sido feito de forma empírica, sem o apoio de métodos sistematizados que garantam o desenvolvimento baseado nos reais objetivos do negócio. A engenharia de software carece de métodos que tornem mais ordenadas e metódicas as etapas de modelagem de negócios e de levantamento de requisitos de um sistema. Neste artigo é apresentada uma metodologia de desenvolvimento de software resultante da incorporação de atividades propostas para modelagem de negócios e levantamento de requisitos, baseadas em uma arquitetura de modelagem de negócios. Essas atividades tornam o desenvolvimento de software mais sistemático e alinhado aos objetivos da organização, e podem ser incorporadas em qualquer metodologia de desenvolvimento baseada no UP (Unified Process - Processo Unificado).

Automatic code generation for microcontrollers from place-transition Petri net models

This paper describes a program for the automatic generation of code for Intel's 8051 microcontroller. The code is generated from a place-transition Petri net specification. Our goal is to minimize programming time. The code generated by our program has been observed to exactly match the net model. It has also been observed that no change is needed to be made to the generated code for its compilation to the target architecture. © 2011 IFAC.

Computational support for the process of software requirement specification

The software industry has become more and more concerned with the appropriate application of activities that composes requirement engineering as a way to improve the quality of its products. In order to support these activities, several computational tools have been available in the market, although it is still possible to find a lack of resources related to some activities. In this context, this paper proposes the inclusion of a module to aid in the requirements specification to a tool called Requirements Elicitation Support Tool. This module allows to specify requirements in accordance with IEEE 830 standard, thus contributing to the documentation of the requirements established for a software system, besides supporting the learning of concepts related to the requirements specification, which improves the skills of users of the tool. © 2012 IEEE.

TAO - A software platform for autonomous mobile robots

To date, different techniques of navigation for mobile robots have been developed. However, the experimentation of these techniques is not a trivial task because usually it is not possible to reuse the developed control software due to system incompabilities. This paper proposes a software platform that provides means for creating reusable software modules through the standardization of software interfaces, which represent the various robot modules. © 2012 ICROS.

Knowledge-based risk management: Survey on Brazilian software development enterprises

A risks management, carried on in an effective way, leads the software development to success and may influence on the organization. The knowledge takes part of such a process as a way to help taking decisions. This research aimed to analyze the use of Knowledge Management techniques to the Risk Management in software projects development and the possible influence on the enterprise revenue. It had, as its main studying subject, Brazilian incubated and graduated software developing enterprises. The chosen research method was the Survey type. Multivariate statistical methods were used for the treatment and analysis of the obtained results, this way identifying the most significant factors, that is, enterprise's achievement constraining factors and those outcome achievement ones. Among the latter we highlight the knowledge methodology, the time of existence of the enterprise, the amount of employees and the knowledge externalization. The results encourage contributing actions to the increasing of financial revenue. © 2013 Springer-Verlag.

A contribuição de modelos utilizando uma abordagem modelo - código

In a world that is increasingly working with software, the need arises for effective approaches that encourage software reuse. The reuse practice must be aligned to a set of practices, procedures and methodologies that create a stable and high quality product. These questions produce new styles and approaches in the software engineering. In this way, this thesis aims to address concepts related to development and model-driven architecture. The model-driven approach provides significant aspects of the automated development, which helps it with produced models built in the specification phase. The definition of terms such as model, architecture and platform makes the focus becomes clearer, because for MDA and MDD is important to split between technical and business issues. Important processes are covered, so you can highlight the artifacts that are built into each stage of model-driven development. The stages of development: CSM, PIM, PSM and ISM, detailing the purpose of each phase in oriented models, making the end of each stage are gradually produced artifacts that may be specialized. The models are handled by different prospects for modeling, abstracting the concepts and building a set of details that portrays a specific scenario. This retraction can be a graphical or textual representation, however, in most cases is chosen a language modeling, for example, UML. In order to provide a practical view, this dissertation shows some tools that improve the construction of models and the code generate that assists in the development, keeping the documentation systemic. Finally, the paper presents a case study that refers to the theoretical aspects discussed throughout the dissertation, therefore it is expected that the architecture and the model-driven development may be able to explain important features to consider in software engineering

Desenvolvimento de sistemas orientado a modelos

The Software Engineering originated with the motivation to mass produce components for increased productivity in production systems. Since its origins, numerous studies have been proposed on the subject as new features in the creation of systems, like the Object- Oriented Programming and Aspect-Oriented Programming, have been established and methodologies have been developed to control them efficiently. However, years of studies in the area were not sufficient to create a methodology for reusing software artifacts really efficient and easy enough to be widespread. Given this, the Model-Driven Development (MDD) is trying to promote it using the modeling of systems as a reference, becoming part of it and establishing a huge productivity gain. One of his approaches is called Model-Driven Software Development (MDSD), which focuses on improving the practices and systems development using Domain-Specific Languages (DSL) for this purpose. In this Final Paper, Xtext is used as a tool to prove the productivity and efficiency of this approach, and for that bibliographic studies were made on the approach and the tool, and show the methodology and a case study to demonstrate results and conclusions regarding this work

Apoio à gerência de requisitos de software utilizando Design Rationale

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Parâmetros genéticos para características de desempenho e reprodutivas de aves poedeiras por inferência bayesiana

Pós-graduação em Genética e Melhoramento Animal - FCAV