Reproductive cycles in Bos indicus cattle

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Limit cycles for singular perturbation problems via inverse integrating factor

In this paper singularly perturbed vector fields Xε defined in ℝ2 are discussed. The main results use the solutions of the linear partial differential equation XεV = div(Xε)V to give conditions for the existence of limit cycles converging to a singular orbit with respect to the Hausdorff distance. © SPM.

Destroying horseshoes via heterodimensional cycles: Generating bifurcations inside homoclinic classes

In this paper, we propose a model for the destruction of three-dimensional horseshoes via heterodimensional cycles. This model yields some new dynamical features. Among other things, it provides examples of homoclinic classes properly contained in other classes and it is a model of a new sort of heteroclinic bifurcations we call generating. © 2008 Cambridge University Press.

Lê cycles and Milnor classes

The purpose of this work is to establish a link between the theory of Chern classes for singular varieties and the geometry of the varieties in question. Namely, we show that if Z is a hypersurface in a compact complex manifold, defined by the complex analytic space of zeroes of a reduced non-zero holomorphic section of a very ample line bundle, then its Milnor classes, regarded as elements in the Chow group of Z, determine the global Lê cycles of Z; and vice versa: The Lê cycles determine the Milnor classes. Morally this implies, among other things, that the Milnor classes determine the topology of the local Milnor fibres at each point of Z, and the geometry of the local Milnor fibres determines the corresponding Milnor classes. © 2013 Springer-Verlag Berlin Heidelberg.

An analysis of diurnal cycles in the mass of ambient aerosols derived from biomass burning and agro-industry

Strong diurnal cycles in ambient aerosol mass were observed in a rural region of Southeast Brazil where the trace composition of the lower troposphere is governed mainly by emissions from agro-industry. An optical particle counter was used to record size-segregated aerosol number concentrations between 13 May 2010 and 15 March 2011. The data were collected every 10 min and used to calculate aerosol mass concentrations. Aerosol samples were also collected onto filters during daytime (10:00-16:00 local time) and nighttime (20:00-06:00) periods, for subsequent analysis of soluble ions and water-soluble organic carbon. Biomass burning aerosols predominated during the dry winter, while secondary aerosols were most important in the summer rainy season. In both seasons, diurnal cycles in calculated aerosol mass concentrations were due to the uptake of water by the aerosols and, to a lesser extent, to emissions and secondary aerosol formation. In neither season could the observed mass changes be explained by changes in the depth of the boundary layer. In the summer, nighttime increases in aerosol mass ranged from 2.7-fold to 81-fold, depending on particle size, while in the winter, the range was narrower, from 2.2-fold to 9.5-fold, supporting the possibility that the presence of particles derived from biomass burning reduced the overall ability of the aerosols to absorb water. Key Points Diurnal cycle of agro-industrial aerosol mass governed by humidity Biomass burning emissions act to suppress particle growth Need to consider diurnal mass cycles in aerosol dry deposition models ©2013. American Geophysical Union. All Rights Reserved.

Birth of limit cycles bifurcating from a nonsmooth center

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of Thermodegradation and Thermostabilization of Poly( lactide acid) Using Subsequent Extrusion Cycles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Limit Cycles for a Class of Continuous and Discontinuous Cubic Polynomial Differential Systems

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Limit cycles of cubic polynomial differential systems with rational first integrals of degree 2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Short-term cycles of feed deprivation and refeeding promote full compensatory growth in the Amazon fish matrinxa (Brycon amazonicus)

Developing nutritional strategies that can reduce production costs for the fish industry without affecting productive performance is paramount to make the activity sustainable. We investigated if short-term cycles of feed deprivation and refeeding elicit compensatory growth in matrinxa (Brycon amazonicus) juveniles, using three feeding protocols for 60 days (Phase 1): two levels of deprivation (feed deprivation for two days and refeeding for three - D2R3, or four days - D2R4) and a control level (daily feeding). Following, all fish groups were fed daily at satiation for 15 days (Phase 2). At Phase 1, matrinxa achieved full compensatory growth in both deprivation levels by increasing feed intake and feed efficiency. Overall, deprived fish consumed 40% (D2R3) and 36% (D2R4) less feed than fish fed daily. In Phase 2, growth was similar for all fish. Feed intake increased in both deprived fish, but feed efficiency did not differ among groups and was lower than in Phase 1, indicating a reduced efficiency in feed utilization when food was freely available. We propose that intermittent cycles of feeding represent an effective means to reduce production costs. (C) 2014 Elsevier B.V. All rights reserved.

Physiological Response to Dolops carvalhoi (Crustacea: Branchiura) Infection by Pacu, Piaractus mesopotamicus, Subjected to Short Cycles of Food Restriction and Refeeding

Feeding strategies that reduce feed and promote compensatory growth could be an interesting tool to reduce costs in the fish production. However, fish health must be monitored to evaluate if their physiological response to adverse conditions, such as parasite infection, does not become compromised. A 12-wk growth trial was conducted to determine the physiological responses of pacu, Piaractus mesopotamicus, that were subjected to different fasting/refeeding cycles and infected with the Dolops carvalhoi. The schemes were: (i) control group fish (FD), (ii) food-restricted and controlled refeeding group (FR/Rc), and (iii) food-restricted and refeeding to satiation group (FR/Rs). After 84 d, the fish were exposed to D. carvalhoi for 30 h. The fish subjected to food restriction did not exhibit compensatory growth. Cortisol levels decreased in all groups within 30 h after infection. Glucose levels increased 6 h after the D. carvalhoi in the FR/Rs and 30 h after infection in the FD. In all of the fish groups, the hematocrit values were reduced after infection, and it was associated with a reduction in the mean corpuscular volume and erythrocytes. At 30 h after infection, the number of erythroblasts increased. The use of the feeding schemes does not indicate a failure of the pacu physiological responses.

Lê Cycles and Milnor Classes of Compact Hypersurfaces

We determine the relation amongst the global Lê cycles and the Milnor classes of analytic hypersurfaces defined by a section of a very ample line bundle over a compact complex manifold. The key point is finding appropriate expressions for the global Lê cycles and for the Milnor classes in terms of polar varieties. Our starting points are an interpretation of the Lê cycles given by T. Gaffney and R. Gassler, a formula by A. Parusinski and P. Pragacz for the Milnor classes via McPherson’s functor, and a conjecture of J.-P. Brasselet, that we prove, stating that Milnor classes can be expressed in terms of polar varieties. We then use the work by R. Piegne for Mather classes, by J. Schürmann and M. Tibăr for MacPherson’s classes for constructible functions, and by D. Massey for an extension of the local Lê cycles for constructible sheaves.

Effect of thermal and mechanical cycles on the hardness and roughness of artificial teeth

In this study the effects of thermal and mechanical cycles on the hardness and roughness of artificial teeth were evaluated. Materials and Methods:Specimens were prepared and stored in distilled water at 37ºC for 48 hours (n=10).The hardness and roughness readings were made in the following time intervals, according to each group:G1: after specimen storage in distilled water at 37°C for 48 hours; G2: after 600.000 constant mechanical cycles; G3: after 1.200.000 constant mechanical cycles; G4: after 2.500 thermalcycling baths, alternated between hot water (55°C) and cold water (5°C) and G5: after 5.000 thermalcycling baths, alternated between hot water (55°C) and cold water (5°C). After cycling and storage procedures, the specimens of each group were submittedto surface roughness and hardness readouts. Statistical evaluation was performed by three-way analysis of variance, complemented by the Tukey multiple comparisons of means test. The level of significance adopted was 5%. There was no significant difference between G1, G4 and G5 as regards mean roughness of different brands of artificial teeth. Groups G2 and G3 showed higher mean roughness values, and generally equivalent values in all time intervals, except for Trilux (G3> G2). Significant differences in hardness values were observed in different brands of artificial teeth, and differences in values after thermal and mechanical cycling. In conclusion, our findings suggest that thermal cyclingdid not change the roughness of the artificial teeth tested, but after the mechanical cycling the roughness values increased. Thermal and mechanical cycling influenced the hardness of the artificial teeth tested.

On the number of limit cycles in discontinuous piecewise linear differential systems with two pieces separated by a straight line

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)