21 resultados para Variáveis ordinais

em Universidade Federal do Rio Grande do Norte(UFRN)


Relevância:

20.00% 20.00%

Publicador:

Resumo:

This master thesis aims to assess the influence of the design decisions on the energy building performance of hotels. The research is based on the integration of field study and computer simulation. Firstly, a detailed field study is carried out to identify the characteristics of hotels in Natal, Rio Grande do Norte. The items assessed are occupancies, light and equipment densities, types of air conditioning, total and monthly energy consumption, among others. A second and more comprehensive field study is carried out to identify the range of occurrence of architectural variables, with a larger number of buildings. A base case is modelled in VisualDOE, based on the first field study. Then, a first set of simulations are run to explore the sensitivity of the variables on the energy consumption. The results analyses were the base of a second set of simulations, which combined the most influential variables. The results of 384 models were assessed, and the impacts of design decisions were quantified. The study discusses tendencies and recommendations, as well as the methods advantages and disadvantages

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The metalceramic crowns are usually used in dentistry because they provide a resistant structure due to its metallic base and its aesthetics from the porcelain that recovers this structure. To manufacture these crowns, a series of stages should be accomplished in the prosthetic laboratories, and many variables can influence its success. Changes in these variables cause alterations in the metallic alloy and in the porcelain, so, as consequence, in the adhesion between them. The composition of the metal alloy can be modified by recasting alloys, a common practice in some prosthetic laboratories. The aim of this paper is to make a systematic study investigating metalceramic crowns as well as analyzing the effect of recasting Ni-Cr alloys. Another variable which can influence the mechanism of metalceramic union is the temperature used in firing porcelain procedure. Each porcelain has to be fired in a fixed temperature which is determined by the manufacturer and its change can cause serious damages. This research simulate situations that may occur on laboratory procedures and observe their consequences in the quality of the metalceramic union. A scanning eletron microscopy and an optic microscopy were accomplish to analyse the metal-ceramic interface. No differences have been found when remelting alloys were used. The microhardness were similar in Ni-Cr alloys casted once, twice and three times. A wettability test was accomplished using a software developed at the Laboratório de Processamento de Materiais por Plasma, on the Universidade Federal do Rio Grande do Norte. No differences were found in the contact angle between the solid surface (metallic substratum) and the tangencial plane to the liquid surface (opaque). To analyse if the temperature of porcelain firing procedure could influence the contact area between metal and porcelain, a variation in its final temperature was achieve from 980° to 955°C. Once more, no differences have been found

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aims to obtain a low-cost virtual sensor to estimate the quality of LPG. For the acquisition of data from a distillation tower, software HYSYS ® was used to simulate chemical processes. These data will be used for training and validation of an Artificial Neural Network (ANN). This network will aim to estimate from available simulated variables such as temperature, pressure and discharge flow of a distillation tower, the mole fraction of pentane present in LPG. Thus, allowing a better control of product quality

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The composition of termite assemblages was analyzed at three Caatinga sites of the Seridó Ecological Station, located in the municipality of Serra Negra do Norte, in the state of Rio Grande do Norte, Brazil. These sites have been subjected to selective logging, and cleared for pasture and farming. A standardized sampling protocol for termite assemblages (30h/person/site) was conducted between September 2007 and February 2009. At each site we measured environmental variables, such as soil granulometry, pH and organic matter, necromass stock, vegetation height, tree density, stem diameter at ankle height (DAH) and the largest and the smallest crown width. Ten species of termites, belonging to eight genera and three families, were found at the three experimental sites. Four feeding-groups were sampled: wood-feeders, soil-feeders, wood-soil interface feeders and leaf-feeders. The wood-feeders were dominant in number of species and number of encounters at all sites. In general, the sites were not significantly different in relation to the environmental variables measured. The same pattern was observed for termite assemblages, where no significant differences in species richness, relative abundance and taxonomic and functional composition were observed between the three sites. The agreement between the composition of assemblages and environmental variables reinforces the potential of termites as biological indicators of habitat quality

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The soil macrofauna is influenced to several biotic and abiotic environmental factors, from changes in the physical environment to a variety of interactions among the species involved, affecting the patterns of biodiversity of soil fauna. The power and specificity of the mechanisms that act on soil organisms vary greatly depending on environmental conditions at different scales of space and time. The Caatinga has great spatial heterogeneity of vegetation, climate and soil, so the soil macrofauna would follow this local spatial variation in the environment? This study aimed to investigate the effects of local environmental variables on biological parameters (taxa richness, total abundance and biomass) of soil macrofauna in a fragment of caatinga in João Câmara, Rio Grande Norte, Northeast Brazil. The study was conducted in the Cauaçu farm, where a grid of 2000m x 500m was drawn, and later, 30 sampling points were randomly selected. The methodology used to collect the macrofauna was the TSBF method. We tested the effects of 10 environmental variables on macrofauna across the plots and across the layers of soil. The hypothesis that macrofauna soil responds to changes in the environment was not supported throughout the plots, but was confirmed to soil layers. The soil macrofauna shows a pattern of concentration in the surface layer and decreases considerably in the deeper layers. This pattern had significant and positive relationship with the aerial plant biomass and fine root stock. The aerial plant biomass releases plant necromass that accumulates in the surface layer, providing an important source of resource and shelter for soil macrofauna, explaining their greater abundance in this layer. The roots are used as a means for the arrival of nutrients to the soil from the primary production, thus a greater amount of root conditions higher food intake for macrofauna, especially the herbivores

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The methods of analysis of the selection system sports talent sometimes do not consider the biological age of the athletes, since that the assessment of maturational moment have several limitations The aim of this work is to develop a predictive equation of pubertal assessment in male subjects, based on anthropometric measurements. We evaluated 206 young boys, aged between eight and 18 years, and studing in public and private schools in Natal, Brazil. The sample selection was done randomly, being used the anthropometric measurements and pubertal maturation evaluation according to the Tanner stages. Statistical analysis followed the presentation of central tendency measures and their derivatives. The inferential analysis was performed according to the ANOVA test, multivariate discriminant analysis and weighted Kappa. The advancement of pubertal stages was accompanied by significant changes in anthropometric variables, demonstrating the relationship presented in both. For this purpose, discriminant analysis selected eight variables with the highest prediction of pubertal maturation, and created an equation with a significance level of 75%. and concordance level of 0.840, considered as excellent. This shows that the prediction of pubertal maturation from anthropometric variables presented as a valid method, being used as a practical tool in sports talents selection

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Demand for organic foods within in Brazil are growing, characterizing itself for if constituting in a new strategical segment of commercialization. In this context, the objective of this research was to investigate the variables used by consumers in the purchase decision of organic products, aiming to characterize the level of competitiveness of these products, assisting in the creation of environmental strategies for the development of the activity and contributing in the increment of the knowledge about the subject, that can assist it in the increase of the commercialization and the consumption of these foods. From data collected in the city of Natal/RN, it was used a survey research, of exploratory and descriptive character. The sample was obtained using 401 questionnaires, in which was realized: the Test of Comparison of Averages, Descriptive analysis, analysis of Cluster and Qui-square. The results found in this study indicate that the main reasons for the organic food purchase are the absence of chemical pesticides in the product, followed by the care with own health and of the household. The main characteristics in the consumers of supermarkets, that are associates with purchase frequency of organic foods are the environmental behavior and lifestyle. Among the profile characteristics, gender, age and number of children are associates with the purchase frequency of these foods and the income and level education not showed association

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The limits to inform is about the character stico of basic, quimica, mineralogical and mechaniques of matlaughed material used in the manufacturing process the product certified in economic region the Cariri, specifically in the city of Crato, Ceará state, motivated the development of this work, since in this region the exist ing economic context that a general appear as important in the production chains. Were made twentyfive soils-test specimen collection and the study was performed to differentiate the mat laugh materials of variaveis processing of mathing raw materials in the factory The product mica monkeys by extrusion and pressing. The results were obtained ap s as analyzes: grain size, index of plasticity, fluoresce incidence X-ray difration the X-ray, and analyzes thermicals and properties technological. through s of curves gresifica returned to was a comparison between the retro the linear, absorb to water, porosity and bulk density. the results show that the excellent distribution and character acceptable available for the processing of the structure color dark red. needing, therefore, of the mixture of a less plastic clay with thick granulation, that works as plasticity reducer. In spite of the different resignation forms for prensagem and extrusion, the characteristics of absorption of water and rupture tension the flexing was shown inside of the patterns of ABNT

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Among the main challenges in the beer industrial production is the market supply at the lowest cost and high quality, in order to ensure the expectations of customers and. consumers The beer fermentation stage represents approximately 70% of the whole time necessary to its production, having a obligatoriness of strict process controls to avoid becoming bottleneck in beer production. This stage is responsible for the formation of a series of subproducts, which are responsible for the composition of aroma/bouquet existing in beer and some of these subproducts, if produced in larger quantities, they will confer unpleasant taste and odor to the final product. Among the subproducts formed during the fermentation stage, total vicinal diketones is the main component, since it is limiting for product transfusion to the subsequent steps, besides having a low perception threshold by the consumer and giving undesirable taste and odor. Due to the instability of main raw materials quality and also process controls during fermentation, the development of alternative forms of beer production without impacting on total fermentation time and final product quality is a great challenge to breweries. In this work, a prior acidification of the pasty yeast was carried out, utilizing for that phosphoric acid, food grade, reducing yeast pH of about 5.30 to 2.20 and altering its characteristic from flocculent to pulverulent during beer fermentation. An increase of six times was observed in amount of yeast cells in suspension in the second fermentation stage regarding to fermentations by yeast with no prior acidification. With alteration on two input variables, temperature curve and cell multiplication, which goal was to minimize the maximum values for diketones detected in the fermenter tank, a reduction was obtained from peak of formed diacetyl and consequently contributed to reduction in fermentation time and total process time. Several experiments were performed with those process changes in order to verify the influence on the total fermentation time and total vicinal diketones concentration at the end of fermentation. This experiment reached as the best production result a total fermentation time of 151 hours and total vicinal diketone concentration of 0.08 ppm. The mass of yeast in suspension in the second phase of fermentation increased from 2.45 x 106 to 16.38 x 106 cells/mL of yeast, which fact is key to a greater efficiency in reducing total vicinal diketones existing in the medium, confirming that the prior yeast acidification, as well as the control of temperature and yeast cell multiplication in fermentative process enhances the performance of diketones reduction and consequently reduce the total fermentation time with diketones concentration below the expected value (Max: 0.10 ppm)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The interest in the systematic analysis of astronomical time series data, as well as development in astronomical instrumentation and automation over the past two decades has given rise to several questions of how to analyze and synthesize the growing amount of data. These data have led to many discoveries in the areas of modern astronomy asteroseismology, exoplanets and stellar evolution. However, treatment methods and data analysis have failed to follow the development of the instruments themselves, although much effort has been done. In present thesis, we propose new methods of data analysis and two catalogs of the variable stars that allowed the study of rotational modulation and stellar variability. Were analyzed the photometric databases fromtwo distinctmissions: CoRoT (Convection Rotation and planetary Transits) and WFCAM (Wide Field Camera). Furthermore the present work describes several methods for the analysis of photometric data besides propose and refine selection techniques of data using indices of variability. Preliminary results show that variability indices have an efficiency greater than the indices most often used in the literature. An efficient selection of variable stars is essential to improve the efficiency of all subsequent steps. Fromthese analyses were obtained two catalogs; first, fromtheWFCAMdatabase we achieve a catalog with 319 variable stars observed in the photometric bands Y ZJHK. These stars show periods ranging between ∼ 0, 2 to ∼ 560 days whose the variability signatures present RR-Lyrae, Cepheids , LPVs, cataclysmic variables, among many others. Second, from the CoRoT database we selected 4, 206 stars with typical signatures of rotationalmodulation, using a supervised process. These stars show periods ranging between ∼ 0, 33 to ∼ 92 days, amplitude variability between ∼ 0, 001 to ∼ 0, 5 mag, color index (J - H) between ∼ 0, 0 to ∼ 1, 4 mag and spectral type CoRoT FGKM. The WFCAM variable stars catalog is being used to compose a database of light curves to be used as template in an automatic classifier for variable stars observed by the project VVV (Visible and Infrared Survey Telescope for Astronomy) moreover it are a fundamental start point to study different scientific cases. For example, a set of 12 young stars who are in a star formation region and the study of RR Lyrae-whose properties are not well established in the infrared. Based on CoRoT results we were able to show, for the first time, the rotational modulation evolution for an wide homogeneous sample of field stars. The results are inagreement with those expected by the stellar evolution theory. Furthermore, we identified 4 solar-type stars ( with color indices, spectral type, luminosity class and rotation period close to the Sun) besides 400 M-giant stars that we have a special interest to forthcoming studies. From the solar-type stars we can describe the future and past of the Sun while properties of M-stars are not well known. Our results allow concluded that there is a high dependence of the color-period diagram with the reddening in which increase the uncertainties of the age-period realized by previous works using CoRoT data. This thesis provides a large data-set for different scientific works, such as; magnetic activity, cataclysmic variables, brown dwarfs, RR-Lyrae, solar analogous, giant stars, among others. For instance, these data will allow us to study the relationship of magnetic activitywith stellar evolution. Besides these aspects, this thesis presents an improved classification for a significant number of stars in the CoRoT database and introduces a new set of tools that can be used to improve the entire process of the photometric databases analysis

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Morbidly obese patients present an increase in heart rate, blood pressure and perceived exertion besides lower walking ability compared to normal weight people. However, little is known about how these variables are presented after bariatric surgery. Moreover, despite the distance walked during the six-minute walk (6MWT) improve after surgery is not well established if the level of physical activity influences this improvement. Objective: To evaluate cardiovascular performance, perceived effort, ability of walking and physical activity level of patients with morbid obesity before and after bariatric surgery. Methods: The cardiovascular performance, perception of effort, the ability to walk and level of physical activity were assessed in 22 patients before (BMI = 50.4 kg/m2) and after (BMI = 34.8 kg/m2) bariatric surgery through the 6MWT. The heart rate, blood pressure and perceived exertion were assessed at rest, at the end of the 6MWT and in the second minute post-test (HR recovery). The ability to walk was measured by total distance walked at the end of the test while the level of physical activity was estimated by applying the Baecke questionnaire, analyzing domains occupation, leisure and locomotion and leisure and physical activity. Results: The HR at rest and recovery decreased significantly (91.2 ± 15.8 bpm vs. 71.9 ± 9.8 bpm, 99.5 ± 15.3 bpm vs 82.5 ± 11.1 bpm, respectively), as well as all the arterial pressure and perceived exertion after surgery. The distance achieved by the patients increased by 58.4 m (p = 0.001) postoperatively. Time postoperatively had correlation with the percentage of excess weight lost (r = 0.48, p = 0.02), BMI (r =- 0.68, p = 0.001) and the Baecke (r = 0.52, p = 0.01) which did not happen with the distance walked (r = 0.37, p = 0.09). Despite weight loss, patients showed no difference in the level of physical activity in any of the areas before and after surgery. Conclusion: The cardiovascular performance, the perception of effort and ability to walk seem to improve after bariatric surgery. However, despite improvement in the ability to walk by the distance achieved in the 6MWT after weight loss, this is not reflected in an increase in physical activity level of obese patients after surgery

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introduction: Falls among older adults is a public health problem, therefore it is necessary preventive actions, however the adherence is the major problem faced by practitioners and researchers working on falls prevention programs. Objective: To evaluate the variables related to the adherence to falls prevention programs among the elderly enrolled in a Basic Health Unit (BHU). Methods: Was performed an observational cross-sectional analytical study. All elderly registered in a BHU and able to ambulate independently were invited to participate in a falls prevent program. The Elderly who Adhered to the Program (EAP) were evaluated at BHU; and the Elderly Not Adhered to the Program (ENAP) were identified and assessed at home. The assessment for both groups was performed using an evaluation form containing personal data, measures and clinical scales to assess cognitive status, balance, mobility, fear of falling, handgrip strength. Data were analyzed with SPSS 20.0. In addition to this assessment, the ENAP underwent a semi structured interview, in which we used the qualitative approach based on the figure of the Collective Subject Discourse. Results: The study included 222 elderly, 111 EAP and 111ENAP, most aged between 70 and 79 years (48.2%), female (68.5%), married (52.3%) and illiterate (47.7%). Consolidated as protective factors for adherence, worst rates of physical activity (p = 0.001), balance (p = 0.010) and cognition (p = 0.007). The interview of ENAP identified two themes: "Local implementation of programs for the prevention of falls" and "Relationship between BHU and the elderly health care," and found that the elderly who did not adhere were unable to displace and did not mention that primary care programs are related to health care in elderly. Conclusions: Elderly who do not adhere to the program differ from elderly who adhere as worst indices of cognition, balance and physical activity which implies greater risk of falling; and they were unable to participate in falls prevention program and by to be caregiver and showed displacement difficult

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A obesidade é uma epidemia global em alarmante ascensão. Caracterizada pelo excesso de gordura corporal subcutânea, de caráter multifatorial, está relacionada ao surgimento de diversas co-morbidades, entre elas, várias alterações respiratórias, estas se tornam mais intensas quanto maior o grau de obesidade. Não há consenso na relação entre os marcadores de adiposidade geral ou específicos e suas repercussões sobre a função ventilatória, especialmente em relação à sobrecarga muscular respiratória. Objetivo: Analisar a relação entre marcadores antropométricos e variáveis espirométricas e de força muscular respiratória em indivíduos com obesidade mórbida. Métodos: Estudo transversal entre setembro de 2007 e outubro de 2012. Participaram da pesquisa 163 obesos mórbidos (37.1±9.8 anos e IMC=49.0±5.88 Kg/m2) sem alterações espirométricas. Foram observadas as associações entre Índice de Massa Corporal-IMC, adiposidade localizada (Circunferências de Pescoço-CP, Cintura-CC e Quadril-CQ), percentual de gordura corporal através do Índice de Adiposidade Corporal-IAC, volumes e capacidades pulmonares (CVF, VEF1 e VRE) e pressões respiratória estática (PIM e PEM) e dinâmica (VVM). Resultados: O VRE foi o volume mais afetado pela obesidade (apenas 41%predito) e mostrou associação negativa nas relações com todos os marcadores de adiposidade (IMC: r=-0.52; IAC: r=-0.21; CC: r=-0.44; CP: r=-0.25 e CQ: r=-0.28). Há relação inversa entre o percentual de gordura corporal (IAC) com a CVF (r=-0.59), o VEF1(r=-0.56) e o VVM (r=-0.43). As pressões respiratórias são justificadas principalmente pela adiposidade ao redor do pescoço e o IAC. Nossos dados de força muscular respiratória foram melhores associados aos valores de referências sugeridos pelas equações de Harik-Klan et al (1998) para PIM (R²=0.72) e com a equação proposta por Neder et al (1999) para PEM (R²=0.52). Em um modelo de regressão linear, as variáveis de adiposidade não justificam a VVM, já o VEF1 explica 62% da variância da VVM em obesos mórbidos. Conclusão: O percentual da adiposidade corporal e a circunferência do pescoço estão associados com a força muscular e capacidade de gerar fluxo respiratório de obesos mórbidos. Sugerimos a equação elaborada por Harik-Klan et al (1998) para obtenção de valores preditos de PIM e a equação proposta por Neder et al (1999) para valores de normalidade da PEM em sujeitos com obesidade mórbida. Foi possível fornecer uma equação de referência específica para VVM em obesos mórbidos

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work are presented, as a review and in a historical context, the most used methods to solve quadratic equations. It is also shown the simplest type of change of variables, namely: x = Ay + B where A;B 2 R, and some changes of variables that were used to solve quadratic equations throughout history. Finally, a change of variable, which has been used by the author in the classroom as an alternative method, is presented and the result of this methodoly is illustrated by the responses of a test that was done by the students in classroom

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Microseisms are continuous vibrations pervasively recorded in the mili Hertz to 1 Hz frequency range. These vibrations are mostly composed of Rayleigh waves and are strongest in the 0.04 to 1 Hz frequency band. Their precise source mechanisms are still a matter of debate but it is agreed that they are related to atmospheric perturbations and ocean gravity waves. The Saint Peter Saint Paul Archipelago (SPSPA) is located in the equatorial region of the Atlantic Ocean about 1,100 km distant from the Brazilian northeastern coast. The SPSPA is composed by a set of several small rocky formations with a total area of approximately 17,000 m². Due to its remote distance from the continent and the lack of cultural noise, this location is a unique location for measuring microseismic noise and to investigate its relation with some climate and oceanographic variables. In the SPSPA we have recorded both primary microseisms (PM) at 0.04 – 0.12 Hz and the secondary microseisms (SM) at 0.12 – 0.4 Hz during 10 months in 2012 and 2013. Our analysis indicates a good correlation between the microseismic noise in the region and a seasonal dependency. In particular, the winter in the northern hemisphere. We have also shown that most of the PM is generated in the SPSPA itself. The SM source location depends with the seasonal climatic and oceanographic variables in the northern hemisphere