Estimação e compensação de não linearidades inerentes aos atuadores dos processos industriais

The oscillations presents in control loops can cause damages in petrochemical industry. Canceling, or even preventing such oscillations, would save up to large amount of dollars. Studies have identified that one of the causes of these oscillations are the nonlinearities present on industrial process actuators. This study has the objective to develop a methodology for removal of the harmful effects of nonlinearities. Will be proposed an parameter estimation method to Hammerstein model, whose nonlinearity is represented by dead-zone or backlash. The estimated parameters will be used to construct inverse models of compensation. A simulated level system was used as a test platform. The valve that controls inflow has a nonlinearity. Results and describing function analysis show an improvement on system response

Controle por modos deslizantes com compensação difusa aplicado a sistemas com descontinuidade

The development of non-linear controllers gained space in the theoretical ambit and of practical applications on the moment that the arising of digital computers enabled the implementation of these methodologies. In comparison with the linear controllers more utilized, the non -linear controllers present the advantage of not requiring the linearity of the system to determine the parameters of control, which permits a more efficient control especially when the system presents a high level of non-linearity. Another additional advantage is the reduction of costs, since to obtain the efficient control through linear controllers it is necessary the utilization of sensors and more refined actuators than when it is utilized a non-linear controller. Among the non-linear theories of control, the method of control by gliding ways is detached for being a method that presents more robustness, before uncertainties. It is already confirmed that the adoption of compensation on the region of residual error permits to improve better the performance of these controllers. So, in this work it is described the development of a non-linear controller that looks for an association of strategy of control by gliding ways, with the fuzzy compensation technique. Through the implementation of some strategies of fuzzy compensation, it was searched the one which provided the biggest efficiency before a system with high level of nonlinearities and uncertainties. The electrohydraulic actuator was utilized as an example of research, and the results appoint to two configurations of compensation that permit a bigger reduction of the residual error

Estabilização de órbitas periódicas instáveis utilizando controle por modos deslizantes com compensação adaptativa

The chaotic behavior has been widely observed in nature, from physical and chemical phenomena to biological systems, present in many engineering applications and found in both simple mechanical oscillators and advanced communication systems. With regard to mechanical systems, the effects of nonlinearities on the dynamic behavior of the system are often of undesirable character, which has motivated the development of compensation strategies. However, it has been recently found that there are situations in which the richness of nonlinear dynamics becomes attractive. Due to their parametric sensitivity, chaotic systems can suffer considerable changes by small variations on the value of their parameters, which is extremely favorable when we want to give greater flexibility to the controlled system. Hence, we analyze in this work the parametric sensitivity of Duffing oscillator, in particular its unstable periodic orbits and Poincar´e section due to changes in nominal value of the parameter that multiplies the cubic term. Since the amount of energy needed to stabilize Unstable Periodic Orbits is minimum, we analyze the control action needed to control and stabilize such orbits which belong to different versions of the Duffing oscillator. For that we will use a smoothed sliding mode controller with an adaptive compensation term based on Fourier series.

Uma técnica de linearização por realimentação para compensação de agarramento em válvulas de controle pneumáticas

In control loops valve stiction is a very common problem. Generally, it is one of main causes of poor performance of industrial systems. Its most commonly observed effect is oscillation in the process variables. To circumvent the undesirable effects, friction compensators have been proposed in order to reduce the variability in the output. This work analyzes the friction compensation in pneumatic control valves by using feedback linearization technique. The valve model includes both dead zone and jump. Simulations show that the use of this more complete model results in controllers with superior performance. The method is also compared through simulations with the method known as Constant Reinforcement (CR), widely used in this problem.

Um olhar crítico sobre a individualização da curva de compensação em prótese total

Objetivo: Buscar na literatura evidências científicas que suportem os benefícios da individualização da curva de compensação em prótese total, pela técnica do desgaste de Paterson, em relação à curva de compensação não individualizada. Metodologia: Realizou-se, em Dezembro de 2009, uma revisão sistemática da literatura nas bases de dados MEDLINE, LILACS e BBO com os termos “prótese total” e “oclusão”. Para abranger uma maior quantidade de dados, realizou-se uma busca manual através das referências dos artigos inicialmente selecionados. Resultados: Obteve-se 1273 referências na base dados MEDLINE, 64 na LILACS e 103 na BBO, num total de 1440 referências. Dessas, apenas 24 tratavam do assunto “curva de compensação”, as quais somaram-se mais 13 artigos selecionados manualmente. Conclusão: A partir dos resultados obtidos, conclui-se que não existem dados suficientes que comprovem clinicamente os benefícios da individualização da curva de compensação em relação às próteses totais com curva de compensação não individualizada. Ensaios clínicos controlados e randomizados são necessários para que se possa determinar qual o procedimento mais adequado.

Um olhar crítico sobre a individualização da curva de compensação em prótese total

Objetivo: Buscar na literatura evidências científicas que suportem os benefícios da individualização da curva de compensação em prótese total, pela técnica do desgaste de Paterson, em relação à curva de compensação não individualizada. Metodologia: Realizou-se, em Dezembro de 2009, uma revisão sistemática da literatura nas bases de dados MEDLINE, LILACS e BBO com os termos “prótese total” e “oclusão”. Para abranger uma maior quantidade de dados, realizou-se uma busca manual através das referências dos artigos inicialmente selecionados. Resultados: Obteve-se 1273 referências na base dados MEDLINE, 64 na LILACS e 103 na BBO, num total de 1440 referências. Dessas, apenas 24 tratavam do assunto “curva de compensação”, as quais somaram-se mais 13 artigos selecionados manualmente. Conclusão: A partir dos resultados obtidos, conclui-se que não existem dados suficientes que comprovem clinicamente os benefícios da individualização da curva de compensação em relação às próteses totais com curva de compensação não individualizada. Ensaios clínicos controlados e randomizados são necessários para que se possa determinar qual o procedimento mais adequado.

Controle ativo de vibração em estruturas inteligentes utilizando um controlador por modos deslizantes com compensação difusa

Smart structures and systems have the main purpose to mimic living organisms, which are essentially characterized by an autoregulatory behavior. Therefore, this kind of structure has adaptive characteristics with stimulus-response mechanisms. The term adaptive structure has been used to identify structural systems that are capable of changing their geometry or physical properties with the purpose of performing a specific task. In this work, a sliding mode controller with fuzzy inference is applied for active vibration control in an SMA two-bar truss. In order to obtain a simpler controller, a polynomial model is used in the control law, while a more sophisticated version, which presents close agreement with experimental data, is applied to describe the SMA behavior of the structural elements. This system has a rich dynamic response and can easily reach a chaotic behavior even at moderate loads and frequencies. Therefore, this approach has the advantage of not only obtaining a simpler control law, but also allows its robustness be evidenced. Numerical simulations are carried out in order to demonstrate the control system performance.

Controle ativo de vibração em estruturas inteligentes utilizando um controlador por modos deslizantes com compensação difusa

Smart structures and systems have the main purpose to mimic living organisms, which are essentially characterized by an autoregulatory behavior. Therefore, this kind of structure has adaptive characteristics with stimulus-response mechanisms. The term adaptive structure has been used to identify structural systems that are capable of changing their geometry or physical properties with the purpose of performing a specific task. In this work, a sliding mode controller with fuzzy inference is applied for active vibration control in an SMA two-bar truss. In order to obtain a simpler controller, a polynomial model is used in the control law, while a more sophisticated version, which presents close agreement with experimental data, is applied to describe the SMA behavior of the structural elements. This system has a rich dynamic response and can easily reach a chaotic behavior even at moderate loads and frequencies. Therefore, this approach has the advantage of not only obtaining a simpler control law, but also allows its robustness be evidenced. Numerical simulations are carried out in order to demonstrate the control system performance.

Estimação e compensação de não linearidades inerentes aos atuadores dos processos industriais

The oscillations presents in control loops can cause damages in petrochemical industry. Canceling, or even preventing such oscillations, would save up to large amount of dollars. Studies have identified that one of the causes of these oscillations are the nonlinearities present on industrial process actuators. This study has the objective to develop a methodology for removal of the harmful effects of nonlinearities. Will be proposed an parameter estimation method to Hammerstein model, whose nonlinearity is represented by dead-zone or backlash. The estimated parameters will be used to construct inverse models of compensation. A simulated level system was used as a test platform. The valve that controls inflow has a nonlinearity. Results and describing function analysis show an improvement on system response

Qualidade de vida no trabalho: o caso de enfermeiros dos Hospitais Públicos Walfredo Gurgel e Santa Catarina

The theoretical foundation of this study addresses the construct Quality of Worklife involving pro-active reading organizations in face to social developments of the working class, which is a challenge to the people s management. In this sense, as a contribution to the studies of quality of worklife (QOWL), this study addresses the quality of lifework of nurses at Walfredo Gurgel and Santa Catarina public hospitals. The goal is to make a diagnosis about the quality of lifework of these employees taking as a basis dimensions and performance indicators shown in the model by Fernandes (1996). The research is characterized by field, in a descriptive way. This survey comprised 75 nurses, with 49 by Walfredo Gurgel hospital and 26 by Santa Catarina one. The data collection was carried out through structured questionnaire. The questions were processed in the software Statistic 6.0, with factor analysis and multiple regressions, after the systematization of data. As a result, the most nurses in hospitals are dissatisfied with the quality of lifework, with the highest incidence in Santa Catarina hospital. The variable occupational health assessment was more negative in the hospital Santa Catarina one, whereas in Walfredo Gurgel, was family assistance. The variable guarantee of employment was more positive assessment in two hospitals without, though, implying in high importance on QOWL of nurses. The factor structure and decision showed greater sensitivity to explain the QOWL of nurses, joining 17 variables from 40 of the model. The factor working conditions, joining 6 variables, showed the second highest sensitivity. The compensation factor, gathering 5 variables, showed the third highest sensitivity while image and health factors showed minor importance

Dança Folclórica: um estudo das qualidades físicas básicas em universitários de diferentes níveis técnicos

Health and life quality can be preserved and improved by the regular practice of physical activity. Sedentarism is an undesirable condition and represents risk for the health. This study has as objective to analyze the caloric cost and the basic physical qualities in college students of different technical levels. The research was descriptive and applied to 35 students, volunteers, from 19 to 34 years old, from both sexes, participants of the Dance Body of State University of Piauí, in the city of Teresina, in the activities of folkloric dance and walking. The caloric cost was evaluated with the accelerometer Caltrac 100/100 Plan, the basic physical qualities through the sitting and reaching test (flexibility); the vertical impulsion test, crouch (inferior members strength); the abdominal test (located muscular resistance); and the Burpee test (motor coordination). The participants were separated in two groups according to their time of practice: group 1 (beginners), group 2 (advanced). The parametric tests t by Student and correlation by Pearson were used, observing a significance p<0,05 in the sense of comparing the observed results, which showed that there are no significant differences between the two groups of students, according to the time of practice, in which concerns the caloric cost. The results of Strength, Resistance and Co-ordination test did not differ so much between the two groups. On the other hand, in the variable flexibility significant differences were observed (sig.p = 0,0022 << 0,05) between the observed groups, being Group 1 (31,5 ± 6,3) meaningfully less than Group 2 (38,1 ± 4,9), which constitutes a difference of about 21%. Such results present relations of caloric cost compensation between the studied groups, the motivation to the beginners group and flexibility to tne advanced group, justifying the lack of significant distinctions. In this sense the folkloric dance, as a physical activity, appears to be efficient, for significant co-relations are still noticed between the caloric cost levels of the dance with the walking, besides not presenting expressive differences between them.

O PROEJA ensino médio no ifrn, campus Caicó: causas da desistência e motivos da permanência

This dissertation deals about the theme of National Integration Program of the Professional Education to the Basic Education in the form of Youth and Adults Education - PROEJA, which was developed at the Federal Institute of Education Science and Technology of Rio Grande do Norte - IFRN - Campus Caicó. It aims to analyze the causes of the abandonment and the reasons for the permanence of students within the mentioned program. To substantiate this research, we used methodologically, some procedures such as bibliographical research, documentary analysis, semi-structured interviews and focus group. To analyze the data, we discussed the contradiction that involves duality and educational compensation based in the struggles and achievements of rights at the core of public policies for high schools, for vocational education and the education of youth and adults in the 2000s. We analyze the integrated high school under PROEJA, having as reference the conception of the total human formation; the inseparability of the primary education system and vocational education and the integration of knowledge and expertise as a whole, discussing the specificities of the modality EJA, discussing the causes of abandonment and the reasons for the permanence of the students of education for youth and adults (EJA) in the primary education system. As for the results, we found that although the PROEJA be a program that aims to provide a complete human formation to contribute to the full citizenship of their graduate members, what is announced in the document that guides its creation has not been materialized in Caicó Campus. The curriculum of the course was not designed for the students of EJA, nor teachers have had an adequate training to work with these specific individuals, and its specificities of being workers with differentiated learning times have not been considered. In addition, the courses are predominantly of instrumentalist characteristics. This indicates that the material and institutional conditions to achieve the promised total and complete training have not being fully materialized at the researched school. Associated with the difficulties concerning the intra-school and extra-school conditions, personal and socioeconomic conditions which are related to the obligation to work that implies in limitations to balance work, school and family, they influenced in the interruption of the school trajectory of these subjects. Through research, we confirmed that the motives of students who remain have to do also with intraescolares conditions the quality of education (qualification of technical staff and teachers) involved in the educational process, as well as socioeconomic and personal issues represented by the support of colleagues and family.Then it is concluded that the causes of abandonment and the reasons of the permanence are of institutional, socioeconomic and personal origins. Finally, it is observed that capitalist society demands as much as possible high levels of educated workers, and at the same time makes difficult the access to that education for much of the population, and it is not randomly. The objects of that exclusion are the popular worker classes and their children

Análise e desenvolvimento de controladores preditivos multivariáveis baseados em multi-modelos bilineares

This work addresses issues related to analysis and development of multivariable predictive controllers based on bilinear multi-models. Linear Generalized Predictive Control (GPC) monovariable and multivariable is shown, and highlighted its properties, key features and applications in industry. Bilinear GPC, the basis for the development of this thesis, is presented by the time-step quasilinearization approach. Some results are presented using this controller in order to show its best performance when compared to linear GPC, since the bilinear models represent better the dynamics of certain processes. Time-step quasilinearization, due to the fact that it is an approximation, causes a prediction error, which limits the performance of this controller when prediction horizon increases. Due to its prediction error, Bilinear GPC with iterative compensation is shown in order to minimize this error, seeking a better performance than the classic Bilinear GPC. Results of iterative compensation algorithm are shown. The use of multi-model is discussed in this thesis, in order to correct the deficiency of controllers based on single model, when they are applied in cases with large operation ranges. Methods of measuring the distance between models, also called metrics, are the main contribution of this thesis. Several application results in simulated distillation columns, which are close enough to actual behaviour of them, are made, and the results have shown satisfactory

Controle preditivo não linear baseado no modelo de Hammerstein com prova de estabilidade

The Predictive Controller has been receiving plenty attention in the last decades, because the need to understand, to analyze, to predict and to control real systems has been quickly growing with the technological and industrial progress. The objective of this thesis is to present a contribution for the development and implementation of Nonlinear Predictive Controllers based on Hammerstein model, as well as to its make properties evaluation. In this case, in the Nonlinear Predictive Controller development the time-step linearization method is used and a compensation term is introduced in order to improve the controller performance. The main motivation of this thesis is the study and stability guarantee for the Nonlinear Predictive Controller based on Hammerstein model. In this case, was used the concepts of sections and Popov Theorem. Simulation results with literature models shows that the proposed approaches are able to control with good performance and to guarantee the systems stability

Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico

This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technological option for the high-frequency electronic power converters development. The resonant converter operates at 50 kW output power under a 400 kHz frequency and it is constituted by inverter cells using ultra-fast IGBT devices. In order to minimize the turn-off losses, the inverter cells operates in a ZVS mode referred by a modified PLL loop that maintains this condition stable, despite the load variations. The sequential pulse gating command strategy used it allows to operate the IGBT devices on its maximum power limits using the derating and destressing current scheme, as well as it propitiates a frequency multiplication of the inverters set. The output converter is connected to a series resonant circuit constituted by the applicator ICTP torch, a compensation capacitor and an impedance matching RF transformer. At the final, are presented the experimental results and the many tests achieved in laboratory as form to validate the proposed new technique