140 resultados para Compósito de pinhão


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Researches have shown that the introduction of rubber in concrete improves the features of its deformability, as well as contributes to environmental disposal of waste generated in the tire retreading process. Furthermore, there is a high availability of limestone within RN and CE country. Ignorance about this stone, does not allow its wide use as aggregate, leaving, this abundant supply idle. A composite of limestone gravel, with proportions of tire rubber waste which could be used as concrete would be an alternative to concrete for low applications. Therefore, this research aims to evaluate the characteristics of concrete containing limestone gravel and proportions of little aggregate replacement (sand) by tire rubber waste. To this goal, the material components of the concrete were characterized, concrete specimens with limestone gravel were made, from the dash 1.0: 2.5: 3.5, varying the water/cement ratio, and inserting a commercial plasticizer, without a proportion of residue, known as reference. From this, concrete with and without the presence of the additive in the same proportions were chosen, as well as these with the use of granite gravel, for being the most used. Selected the references, to these, replacements of little aggregate (sand) were added replaced by rubber waste from the tire retreading process, treated with 1M NaOH in proportions from 5.0 to 20.0 % by mass, cured and exposed to the semiarid environment. The results indicate the possibility of using limestone gravel in the concrete composition with workability correction using plasticizer. There was a decrease in the mechanical properties of the concrete with increments of waste rubber, but there is an improvement in toughness and deformability of the composite, which makes it interesting for the construction of non-structural concrete floors, as well as, the rubber waste delayed the hardening process, continuing to gain resistance after 28 days

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In the present work it was developed originals alternatives of enveronmentally safe and economically viable destination of thermoset plastic residue from a button factory, which at presnte stores such residue tempor and in a way that is inconvenient to the atmosphere, a waiting safe solutions. As the residue is not recycleab and its burning leberates strongly aggressive gases, safe alternatives were researched. Inicially, ghe residue in incineration was performed in cement ovens with precise control ofe emission of gases, but it was proved inviable due to its low calorific power, as well as the liberation of free lead in the ashes. An original and feasible option was the residue confinemente in soil-ciment blocks, lohich resulted in blocks highly resistant to simple compression with structural block, and also a significant increase in thermal resistence. Was got up other options of original and important composites as: making of blocks for pré-moulded flagstone, internal coating of walls with plaster being obtained good texture results, replenish of ceramic blocks and blocks with cement, also implying in increase of thermal resistance. Besides these original and scientific contributions, the it was technologically contribution of defreadation with suggestions of the material using torch of thermal plasm; for this was projected, built, characterized and tested a torch to it shapes it being obtained exciting results for the development of this technology come back for ending destruction from all the types of inconvenient garbage to the atmosphere

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Ceramic composites produced with polymerics precursors have been studied for many years, due to the facility of obtaining a complex shape, at low temperature and reduces cost. The main objective of this work is to study the process of sintering of composites of ceramic base consisting of Al2O3 and silicates, reinforced for NbC, through the technique of processing AFCOP, as well as the influence of the addition of LZSA, ICZ and Al as materials infiltration in the physical and mechanical properties of the ceramic composite. Were produced ceramic matrix composites based SiCxOy e Al2O3 reinforced with NbC, by hidrosilylation reaction between D4Vi and D1107 mixtured with Al2O3 as inert filler, Nb and Al as reactive filler. The specimens produced were pyrolised at 1200, 1250 and 1400°C and infiltred with Al, ICZ and LZSA, respectively. Density, porosity, flexural mechanical strength and fracture surface by scanning electron microscopy were evaluated. The microstructure of the composites was investigated by X-ray diffraction to identify the presence of crystalline phases. The composites presented apparent porosity varying of 31 up to 49% and mechanical flexural strength of 14 up to 34 MPa. The infiltration process improviment of the densification and reduction of the porosity, as well as increased the values of mechanical flexural strength. The obtained phases had been identified as being Al3Nb, NbSi2, Nb5S3, Nb3Si and NbC. The samples that were submitted the infiltration process presented a layer next surface with reduced pores number in relation to the total volume

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Produced water is characterized as one of the most common wastes generated during exploration and production of oil. This work aims to develop methodologies based on comparative statistical processes of hydrogeochemical analysis of production zones in order to minimize types of high-cost interventions to perform identification test fluids - TIF. For the study, 27 samples were collected from five different production zones were measured a total of 50 chemical species. After the chemical analysis was applied the statistical data, using the R Statistical Software, version 2.11.1. Statistical analysis was performed in three steps. In the first stage, the objective was to investigate the behavior of chemical species under study in each area of production through the descriptive graphical analysis. The second step was to identify a function that classify production zones from each sample, using discriminant analysis. In the training stage, the rate of correct classification function of discriminant analysis was 85.19%. The next stage of processing of the data used for Principal Component Analysis, by reducing the number of variables obtained from the linear combination of chemical species, try to improve the discriminant function obtained in the second stage and increase the discrimination power of the data, but the result was not satisfactory. In Profile Analysis curves were obtained for each production area, based on the characteristics of the chemical species present in each zone. With this study it was possible to develop a method using hydrochemistry and statistical analysis that can be used to distinguish the water produced in mature fields of oil, so that it is possible to identify the zone of production that is contributing to the excessive elevation of the water volume.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Post-menopause is a period of women s life cycle that is characterized by estrogen depletion and therefore increasing cardiovascular diseases, neurodegenerative disorders, urogenital atrophy, osteoporosis, hot flushes and sexual discomfort incidences. Estrogen is a hormone with comfirmed antioxidant action and its depletion is related to oxidative stress instalation and damaging various important biomolecules. Regular physical activity has been identified as a factor involved in reducing women s post-menopausal complications in addition to improving antioxidant defense by reducing the oxidative damage and consequently improving life s quality in this part of the population. This study aims to evaluate the influence of hypoestrogenism in antioxidant adaptation due to regular exercise, by determining reduced glutathione (GSH) and Thiobarbituric Acid Reactive Substances (SRAT) concentrations and antioxidant enzymes glutathione peroxidase (GPx), Superoxide Dismutase (SOD) and Catalase (CAT) activities in blood, brain and liver of rats. To achieve this goal we used 50 Wistar rats, weighing 180-250g which were divided into two groups, control - GC (25) and ooforectomized - GO (25). Each group was subdivided into five subgroups: Not-trained - S (5), Not-trained Acute Exercise - SEA (5), regular exercise 30 days - E30 (5), regular exercise 60 days - E60 (5) and regular exercise 90 days - E90 (5). Each of the three subgroups exercised regularly was subjected to acute exercise on the eve and the day of sacrifice to collect biological samples of blood, liver and brain and subsequent determination of SRAT concentration, GSH content and antioxidant enzymes GPx, SOD and CAT activities. The results indicated that the sedentary animals acutely exercised presented oxidative stress and regular physical activity led to antioxidant adaptation. In ooforectomized group the antioxidant adaptation seen in control animals showed to be impaired. Unlike the results from blood and liver, in brain there was a shield against oxidative damage originated by the exercise and that hypoestrogenism led to a loss of this natural antioxidant potential. Therefore, hypoestrogenism interferes negatively in antioxidant adaptation due to regular exercise

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The study of public policy typologies is still a knowledge field which lacks more embracing and applicable studies to different sectors. On that perspective, this work, Social Assistance Policy in Brazil: an analysis from the typologies on public policy, pursues to add the relevant literature to social assistance what focus on the public policy ratings. Moreover, it concerns about a study on the the national policy of social assistance implemented by the Brazilian government from the theoretical referrence of the public policy typologies. For that reason, the referential framework of the public policies as well as the analisys of its fundamentals/principles that are indispensable for achieving a bigger goal, that is to tipify the social assistance policy based on the different public policy typologies and characterize it through the main elements which are intrinsec to the social political and economic reality of Brazil. Thus, the issue suggested for the work is: what is the profile and the political trajectory of the social assistance implemented by the Brazilian Government? How it presents, above all, the features of a distributive, focused and lawful policy, the work has been done througho the following hypothesis: the social assistance policy in Brazil has been of universal, assistance, and focusing aspects. For each of those features granted to the social assistance policy, there is a gathering of changes according to the social, political and economic moment of the country and that stands out due to the different institutions within every cyclical period. The work showed that besides the social policy has gone through meaningful changes during the last decades, even though the adoption of the Organic Law of Social Assistance and its rules, some of the mentioned characteristics still remain, as long as the State s primacy goes on being the economic policies over the dubbed social policies. Notwithstanding, the social assistance will build up itself from the materialization of the growing of the social rights related to the State, but also assuming an important role on the amplified reproducing process regarding the capitalist social relations

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este trabalho tem como objetivo o desenvolvimento de interfaces com o usuário para aplicativo móvel smartphones com intuito de contribuir para a eficiência das atividades de profissionais e pesquisadores da área de fisioterapia ao oferecer suporte ao acompanhamento clínico da dor no tratamento de pacientes fibromiálgicos. Utilizando a abordagem de Design Centrado no Usuário - DCU, foram realizadas entrevistas e uma investigação contextual para a identificação inicial dos problemas e necessidades dos usuários. Verificou-se que as atividades de monitoramento e acompanhamento das sessões do tratamento de pacientes fibromiálgicos são, tradicionalmente, realizadas por meio de manipulando de formulários e fichas em papel (registro das condições de saúde do paciente) e escalas de classificação da dor em formato impresso (apresentadas ao paciente para indicação de sua dor percebida para cada ponto pré-determinado do corpo). Os procedimentos envolvidos nestas atividades dificultam o gerenciamento do desempenho do tratamento, o que, segundo relatos, reflete no comprometimento dos pacientes na adesão e frequência as sessões. A partir da observação e do levantamento das necessidades desses profissionais diante de suas atividades, foi proposto um aplicativo para smartphone com a intenção de minimizar os problemas ocasionados pelo uso das ferramentas convencionais e de prover informações rápidas acerca dos dados coletados. Então, seguindo a abordagem do DCU foi elaborado um modelo conceitual durante a etapa de concepção de soluções, o qual guiou a criação dos protótipos. A avaliação das interfaces do protótipo foi realizada com o envolvimento dos usuários a partir da técnica de avaliação cooperativa. Seus resultados proporcionaram o refinamento das interfaces e o desenvolvimento de uma nova proposta do design das interfaces em protótipo de alta fidelidade, produzido para o ambiente Android. Assim, esse trabalho faz parte do processo de desenvolvimento de um produto de software personalizado com foco na concepção e avaliação das interfaces com o usuário. Por meio da metodologia aplicada, observaram-se indícios os quais sugerem que as interfaces propostas apresentaram-se como um recurso facilitador e capaz de contribuir para eficiência das atividades no acompanhamento do tratamento de pacientes fibromiálgicos

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This thesis aims to enable a wider comprehension on thought operation as well as suggest alternatives for the formation of reflexive, critical, autonomous and creative individuals. The research defends the idea that it is possible for an individual to develop vigilant attention that makes thought flexibilization and change in the course of action, possible. This operation is called Internal Dialogue and is essentially characterized by a continuous openness towards novelty and learning. This makes it possible to minimize the usual way thought operates, in a automatic fashion (automatism). The research was based on theoretical references and ideas of David Bohm (1989;1994;2005) and Michael Polanyi (1983). The main emphasis was the understanding that a crisis situation enables awareness and state of alert that favors a more flexible thought pattern (Aragão Gomes, 1994, 1997). The methodology used was presentation and analysis of these moments through autobibliographical records with indication of crisis on behalf of the subjects. Other criteria were also used that enabled the composition of the analyzed material such as the fact that: the subjects were public and real, the data was available through accessible material; the subjects identified themselves as in crisis; these crisis were of varied kinds; they had different social, cultural and professional profiles. Thus, three auto-bibliographical elements were selected: the Infidel: the story of a woman that challenged Islam (2007), written by the political Muslim author Ayaan Hirsi; Still me: memories (2001), of the actor Christopher Reeve as well as Confessions of a Philosopher (2001), by the philosopher Bryan Magee. In these books an analysis was made related to parts that stated action an though operation that express internal dialogue. These were organized into categories that were pointed out as relevant for the identification of internal dialogue such as: Perceptions of physical reaction; emotions, beliefs and issues, individual actions, self judgment and thought, self questioning, comprehension, observation and empirical investigation, perception of the changes they performed in the world, escape of conditioning as well as action that resulted in new meaning. The analysis performed reinforces our goal once it sated that internal dialogue is an important tool that allows thought awareness, minimizing common automatism and making consciousness possible as well as favoring the occurrence of critical and reflexive thought. Thus, final considerations deal with the need for the development of teaching methodologies that address internal dialogue as a counterpoint to the many daily action that reinforce the automatism of thought

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This thesis aims to enable a wider comprehension on thought operation as well as suggest alternatives for the formation of reflexive, critical, autonomous and creative individuals. The research defends the idea that it is possible for an individual to develop vigilant attention that makes thought flexibilization and change in the course of action, possible. This operation is called Internal Dialogue and is essentially characterized by a continuous openness towards novelty and learning. This makes it possible to minimize the usual way thought operates, in a automatic fashion (automatism). The research was based on theoretical references and ideas of David Bohm (1989;1994;2005) and Michael Polanyi (1983). The main emphasis was the understanding that a crisis situation enables awareness and state of alert that favors a more flexible thought pattern (Aragão Gomes, 1994, 1997). The methodology used was presentation and analysis of these moments through autobibliographical records with indication of crisis on behalf of the subjects. Other criteria were also used that enabled the composition of the analyzed material such as the fact that: the subjects were public and real, the data was available through accessible material; the subjects identified themselves as in crisis; these crisis were of varied kinds; they had different social, cultural and professional profiles. Thus, three auto-bibliographical elements were selected: the Infidel: the story of a woman that challenged Islam (2007), written by the political Muslim author Ayaan Hirsi; Still me: memories (2001), of the actor Christopher Reeve as well as Confessions of a Philosopher (2001), by the philosopher Bryan Magee. In these books an analysis was made related to parts that stated action an though operation that express internal dialogue. These were organized into categories that were pointed out as relevant for the identification of internal dialogue such as: Perceptions of physical reaction; emotions, beliefs and issues, individual actions, self judgment and thought, self questioning, comprehension, observation and empirical investigation, perception of the changes they performed in the world, escape of conditioning as well as action that resulted in new meaning. The analysis performed reinforces our goal once it sated that internal dialogue is an important tool that allows thought awareness, minimizing common automatism and making consciousness possible as well as favoring the occurrence of critical and reflexive thought. Thus, final considerations deal with the need for the development of teaching methodologies that address internal dialogue as a counterpoint to the many daily action that reinforce the automatism of thought

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of this work consists of considering a script so that operating companies in the telecommunications sector, mainly small and medium-sized enterprises, can reach excellency in its operations and get, thus, conditions to compete with companies consolidated in its niche of market. The proposal intends to lead the enterprises to a level of qualification of processes that to become them apt to adopt the Six Sigma method as part of its culture. From the analysis of the essential processes of the sector, methods and tools will be suggested for guarantee the continuous improvement of these processes, without forgetting the internal peculiarities of each company

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In recent debates about the issues of quality, the theme organizational culture and Six Sigma has appeared ever more frequently. In this context several authors suggest that the adoption of Six Sigma practices is influenced by culture. This work focuses on the relationship of organizational culture and quality to the practices of Six Sigma quality. Thus a descriptive-exploratory and correlational study of forty pharmacies of manipulation from Rio Grande do Norte was undertaken. Data collection identified features of companies and the level of use of the practices of Six Sigma quality that have been identified in the literature. For the Organizational Culture evaluation was used the Competitive Value Model (Cameron & Quinn, 1996), tested on north-American organizations and considered a high value academic and professional instrument. This model has been involved with the taximetrics created by Cameron who classifies quality culture in four levels. The results suggest that the Group and Developmental cultures are associated with higher levels of use of the practices of Six Sigma quality than the Rational and Hierarchical Cultures. Regarding the levels of the culture s quality, the highest levels were most frequently cited in Errors Prevention and Perpetual Improvement and Creativity, being the last one more positively related to the Six Sigma indicators