80 resultados para A salvagem perdiçao: erro e ruína na Ilíada


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The development of new fuels is an important field of scientific and technological activities, since much of the energy consumed in the world is obtained from oil, coal and natural gas, and these sources are limited and not renewable. Recently it has assessed the employment of microemulsions as an alternative for obtaining fuel isotropic between phases originally not miscible. Among many advantages, emphasizes the application of substances that provide the reduction of levels of emissions compared to fossil fuels. Thus, this work was a study of various microemulsified systems, aiming to check the performance of the winsor regions front of the use of surfactants: RENEX 18 → 150, UNITOL L-60 → L-100 and AMIDA 60, together with structure of esters from soybean and castor bean oils. From the results it were chosen four systems to physico-chemical analyzes: System I RENEX 60, Soil bean oil, methylic ester (EMOS) and water; System II RENEX 60/AMIDA 60, EMOS and water; System III RENEX 70, mamona oil methylic ester (EMOM) and water and System IV RENEX 95, EMOM and water. The tests of physico-chemical characterization and study of temperature increase were done with nine points with different compositions in a way to include the interest area (microemulsion W/O). After this study, was conducted a modeling to predict the viscosity, the property is more varied as function of compositions systems changes. The best results were the systems II and IV with a temperature stability above 60°C. The system I had its physico-chemical characterization very similar to a fossil fuel. The system II was the best one due to its corrosivity be stable. In the modeling the four systems had shown good, with an error that varied between 5 and 18%, showing to be possible the viscosity prediction from the composition of the system. The effects the microemulsion and the engine´s performance with the microemulsion were also avaliated. The tests were performed in a cycle-diesel engine. The potency and consumption were analysed. Results show a slight increase the rendiment fuel compared with the conventional as well as a decrease in specific consumption

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The present work had as objective to apply an experimental planning aiming at to improve the efficiency of separation of a new type of mixer-settler applied to treat waste water contaminated with oil. An unity in scale of laboratory, was installed in the Post-graduation Program of Chemical Engineering of UFRN. It was constructed in partnership with Petrobras S.A. This called device Misturador-Decantador a Inversão de Fases (MDIF) , possess features of conventional mixer-settler and spray column type. The equipment is composed of three main parts: mixing chamber; chamber of decantation and chamber of separation. The efficiency of separation is evaluated analyzing the oil concentrations in water in the feed and the output of the device. For the analysis one used the gravimetric method of oil and greases analysis (TOG). The system in study is a water of formation emulsified with oil. The used extractant is a mixture of Turpentine spirit hydro-carbons, supplied for Petrobras. It was applied, for otimization of the efficiency of separation of the equipment, an experimental planning of the composite central type, having as factorial portion fractionary factorial planning 2 5-2, with the magnifying of the type star and five replications in the central point. In this work, the following independents variables were studied: contents of oil in the feed of the device; volumetric ratio (O/A); total flowrate ; agitation in the mixing chamber and height of the organic bed. Minimum and maximum limits for the studied variables had been fixed according previous works. The analysis of variance for the equation of the empirical model, revealed statistically significant and useful results for predictions ends. The variance analysis also presented the distribution of the error as a normal distribution and was observed that as the dispersions do not depend on the levels of the factors, the independence assumption can be verified. The variation around the average is explained by 98.98%, or either, equal to the maximum value, being the smoothing of the model in relation to the experimental points of 0,98981. The results present a strong interaction between the variable oil contents in the feed and agitation in the mixing chamber, having great and positive influence in the separation efficiency. Another variable that presented a great positive influence was the height of the organic bed. The best results of separation efficiency had been obtained for high flowrates when associates the high oil concentrations and high agitation. The results of the present work had shown excellent agreement with the results carried out through previous works with the mixer-settler of phase inversion

Relevância:

10.00% 10.00%

Publicador:

Resumo:

La dificultad que los alumnos encuentran en el aprendizaje de matemática viene siendo objeto de investigación por estudiosos en educación matemática, tanto en Brasil como en el exterior. El objetivo de este estudio consiste em investigar las dificuldades en el aprendizado sobre funciones matemáticas y la influencia de las concepciones alternativas a partir de los errores que los candidatos acerca de las cuestiones sobre funciones en la prueba objetiva de matemática del acceso a la universidad de los años de 2001 a 2008. Teniendo como cuestiones de estudio para alcanzar el objetivo propuesto: identificar la relevancia del tema funciones que son contemplados en las pruebas de acceso a la Universidad; asi como cuáles han sido los tipos de funciones más privilegiados y menos privilegiados; analizar si la contextualización de la pregunta y la presencia de elementos no textuales han influenciado en el aumento de tal dificultad; analizar si la representación semiótica agrega mayor exigencia a la pregunta; analizar respecto a la exigencia matemática de la pregunta; analizar lo que se refiere al desempeño de los candidatos para verificar cuál pregunta tuvo mejor desempeño y cuál el peor e identificar los errores más frecuentemente cometidos por los candidatos en esas pruebas. Las reflexiones de los estudiosos como: Radatz (1980), Cury (1994), Socas (1997), Borasi (1997), Franchi e Rincón (2004), Pochulu (2004) presentan las dificultades en el aprendizaje matemático, que aparecen a partir de los errores cometidos por los alumnos, quando estos errores reciben la influencia de las concepciones alternativas. El estudio que se presenta en esta disertación configura un análisis de los errores que los candidatos han cometido en las preguntas objetivas sobre el tema funciones de las pruebas de acceso a la Universidad de los años de 2001 a 2008, a partir de los relatorios de la Comissão Permanente do Vestibular COMPERVE/UFRN. Con la intención de alcanzar los objetivos propuestos para este estudio, fueran sido construidas categorías de análisis. Los resultados encontrados han sido: El tema funciones es el más frecuente entre los demás con (28,1%); el tipo de función priorizada durante esos años ha sido la función logarítmica con (24%); la contextualización de las preguntas exige una mayor comprensión por parte del candidato de lo que las situaciones directas; la caracterización semiótica posee elementos que estructuran esas preguntas que el educando debe saber asociar al texto; la exigencia matemática posibilitó analizar que el procedimiento medio ha sido el más requisitado; el desempeño de los candidatos ha sido en la mayoría bajo (50%); y los principales errores que ellos han cometido han sido de realizar traducciones incorrectas de las expresiones que aparecen en las situaciones-problema; utilizar todos los datos que aparezcan en el problema sin tomar en cuenta si el cálculo realizado responde a la pregunta solicitada; no interpretar coherentemente las informaciones del gráfico; decodificar incorrectamente los valores representados por literales en una recta numérica. Los resultados señalizan la necesidad de una revisión didáctico-metodológicas de la enseñanza de funciones a raíz de las cuales las dificultades en el aprendizaje se han presentado

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The use of the History and the Philosophy of Science (HPS) for the teaching of science and scientific subjects has been advocated in recent decades. It has been pointed out that the History of Science could make for a deeper learning of scientific concepts, since it would promote a contact with the problems which that knowledge has set out to solve. Furthermore, historical episodes would serve to put the discussions about the nature of scientific knowledge into context. With a view to explore those potentialities, the literature in the field has sought to identify the challenges and obstacles for the didactic transposition of subjects from the History of Science. Amongst many aspects, the deficiencies in the training of teachers, so that they can work with the insertion of HPS in the classroom have been highlighted. Another aspect that has been mentioned to be a challenge has to do with the didactic transposition of the Primary Sources, that is, of the original texts on the History of Science. The Primary Sources have significant potentialities: making a connection possible between scientists and concepts, showing the difficulties faced during scientific endeavors, perceiving the role of mistakes as obstacles to be surpassed, not as defeat, etc. On the other hand, there has been little exploration of these concepts in an educational context, due to their own peculiarities. The original texts are often hard to understand and their interpretation demands knowledge of the historical and scientific context in which they were written, as well as skills pertaining to the conduction of research in the field of the History of Science. With this scenario in mind, the research towards this Professional MSc degree starts from the challenge of elaborating and discussing proposals which could enable the didactical transposition of the Primary Sources. We have worked specifically with Primary Sources on the History of the Vacuum and of the Atmospheric Pressure, because of the insertion of these subjects in the Brazilian High School curriculum, in connection with the didactical textbooks. "Historic Journals" were made up from clippings of the original historical texts, as was a Didactical Unit, which takes the usual textbooks as a basis and contemplates using the Journals and the entire Primary Sources in High School. At last, we have elaborated and implemented a course designed for the preparation of teachers and for being an opportunity for the discussion of the feasibility of putting these kinds of proposal into practice

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Muscle fatigue is a phenomenon that promotes physiological and biomechanical disorders and their changes in healthy subjects have been widely studied and have significant importance for care in preventing injuries, but we do not have many information about its effects in patients after ACL reconstruction. Thus, this study is to analyze the effects of fatigue on neuromuscular behavior of quadriceps after ACL reconstruction. To reach this objective, participants were forty men, twenty healthy (26,90 ± 6,29 years) and twenty after ACL reconstruction (29,75 ± 7,01 years) with a graft of semitendinosus and gracilis tendons, between four to six months after surgery. At first, there was an assessment of joint position sense (JPS) at the isokinetic dynamometer at a speed of 5°/s and target angle of 45° to analyze the absolute error of JPS. Next, we applied the a muscle fatigue protocol, running 100 repetitions of isokinetic knee flexion-extension at 90°/s. Concurrently with this protocol, there was the assessment of muscle performance, as the peak torque (PT) and fatigue index, and electromyographic activity (RMS and median frequency). Finally, we repeated the assessment of JPS. The statistical analysis showed that patients after ACL reconstruction have, even under normal conditions, the amended JPS compared with healthy subjects and that after fatigue, both have disturbances in the JPS, but this alteration is significantly exacerbated in patients after ACL reconstruction. About muscle performance, we could notice that these patients have a lower PT, although there are no differences between the dynamometric and EMG fatigue index. These findings show the necessity about the cares of pacients with ACL reconstruction in respect of the risks of articulate instability and overload in ligamentar graft

Relevância:

10.00% 10.00%

Publicador:

Resumo:

There is a known positive effect of nocturnal sleep for brain plasticity and the consolidation of declarative and procedural memories, as well as for the facilitation of insight in problem solving. However, a possible pro-mnemonic effect of daytime naps after learning is yet to be properly characterized. The goal of this project was to evaluate the influence of daytime naps on learning among elementary and middleschool students, measuring the one-day (acute), and semester-long (chronic) effects of post-learning naps on performance. In the Acute Day-Nap condition, the elementary students were exposed to a class and then randomly divided into three groups: Nap (N), Game-based English Class (GBEC) and Traditional English Class (TEC). There were 2 multiple-choice follow-up tests to evaluate students performance in the short and long runs. In the short run, the N group outperformed the other two groups; and such tendency was maintained in the long run. In the chronic condition, the middle-school students were randomly separated into two groups: Nap (N) and Class (C) and were observed during one academic term. The N group had increased school performance in relation to the C group. In the statistical analyses, independent t-tests were applied considering the scores significant when p<0,05, expressed in terms of average ± average standard error. Results can be interpreted as an indication that a single daytime nap opportunity is not enough to ensure learning benefits. Therefore, more research is needed in order to advocate in favor of a daytime nap as a pedagogical means of promoting enhanced school performance

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work calibration models were constructed to determine the content of total lipids and moisture in powdered milk samples. For this, used the near-infrared spectroscopy by diffuse reflectance, combined with multivariate calibration. Initially, the spectral data were submitted to correction of multiplicative light scattering (MSC) and Savitzsky-Golay smoothing. Then, the samples were divided into subgroups by application of hierarchical clustering analysis of the classes (HCA) and Ward Linkage criterion. Thus, it became possible to build regression models by partial least squares (PLS) that allowed the calibration and prediction of the content total lipid and moisture, based on the values obtained by the reference methods of Soxhlet and 105 ° C, respectively . Therefore, conclude that the NIR had a good performance for the quantification of samples of powdered milk, mainly by minimizing the analysis time, not destruction of the samples and not waste. Prediction models for determination of total lipids correlated (R) of 0.9955, RMSEP of 0.8952, therefore the average error between the Soxhlet and NIR was ± 0.70%, while the model prediction to content moisture correlated (R) of 0.9184, RMSEP, 0.3778 and error of ± 0.76%

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In distance learning degree in Chemistry in full of the Secretária de Educação a distância da Universidade Federal do Rio Grande do Norte (SEDIS / UFRN). The teacher-tutor to establish the experimental subjects closer relationships with students, mediating the pedagogical actions that develop in the distance learning course, with a view to achieving the principles of autonomy and learning, contributing to the creation of learning environments collaborative, guided by affection.The article presents the results of an empirical research on affectivity in practice this tutorial experimental classes in higher distance education in the full degree course in Chemistry Polo Currais Novos/ RN, held between 2009 and 2010. The study is based on qualitative methodology, whose data were collected through questionnaires and semi-structured interviews with 48 (forty eight) students involved in distance learning courses and selected in order to compose a group of subjects who showed variability, as guidelines that guide the sampling procedures in qualitative research. The results, based on category theory and empirical analysis of data from the interviews were supplemented by information obtained from participant observation which also served to guide the data collection of the corpus of this work. With the results we understand that there is clarity about what characterizes a loving relationship between those involved in the process of teaching and learning in experimental classes in high school chemistry Distance Education. Furthermore, it was also clear that the communication process in dialogic teaching and learning in higher distance education in chemistry at the trial need to mark out in balanced affective attitudes, the experimental error that value and respect the many possible construction of knowledge by movements social interaction of individual and collective

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In distance learning degree in Chemistry in full of the Secretária de Educação a distância da Universidade Federal do Rio Grande do Norte (SEDIS / UFRN). The teacher-tutor to establish the experimental subjects closer relationships with students, mediating the pedagogical actions that develop in the distance learning course, with a view to achieving the principles of autonomy and learning, contributing to the creation of learning environments collaborative, guided by affection.The article presents the results of an empirical research on affectivity in practice this tutorial experimental classes in higher distance education in the full degree course in Chemistry Polo Currais Novos/ RN, held between 2009 and 2010. The study is based on qualitative methodology, whose data were collected through questionnaires and semi-structured interviews with 48 (forty eight) students involved in distance learning courses and selected in order to compose a group of subjects who showed variability, as guidelines that guide the sampling procedures in qualitative research. The results, based on category theory and empirical analysis of data from the interviews were supplemented by information obtained from participant observation which also served to guide the data collection of the corpus of this work. With the results we understand that there is clarity about what characterizes a loving relationship between those involved in the process of teaching and learning in experimental classes in high school chemistry Distance Education. Furthermore, it was also clear that the communication process in dialogic teaching and learning in higher distance education in chemistry at the trial need to mark out in balanced affective attitudes, the experimental error that value and respect the many possible construction of knowledge by movements social interaction of individual and collective

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work is combined with the potential of the technique of near infrared spectroscopy - NIR and chemometrics order to determine the content of diclofenac tablets, without destruction of the sample, to which was used as the reference method, ultraviolet spectroscopy, which is one of the official methods. In the construction of multivariate calibration models has been studied several types of pre-processing of NIR spectral data, such as scatter correction, first derivative. The regression method used in the construction of calibration models is the PLS (partial least squares) using NIR spectroscopic data of a set of 90 tablets were divided into two sets (calibration and prediction). 54 were used in the calibration samples and the prediction was used 36, since the calibration method used was crossvalidation method (full cross-validation) that eliminates the need for a validation set. The evaluation of the models was done by observing the values of correlation coefficient R 2 and RMSEC mean square error (calibration error) and RMSEP (forecast error). As the forecast values estimated for the remaining 36 samples, which the results were consistent with the values obtained by UV spectroscopy

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work, the quantitative analysis of glucose, triglycerides and cholesterol (total and HDL) in both rat and human blood plasma was performed without any kind of pretreatment of samples, by using near infrared spectroscopy (NIR) combined with multivariate methods. For this purpose, different techniques and algorithms used to pre-process data, to select variables and to build multivariate regression models were compared between each other, such as partial least squares regression (PLS), non linear regression by artificial neural networks, interval partial least squares regression (iPLS), genetic algorithm (GA), successive projections algorithm (SPA), amongst others. Related to the determinations of rat blood plasma samples, the variables selection algorithms showed satisfactory results both for the correlation coefficients (R²) and for the values of root mean square error of prediction (RMSEP) for the three analytes, especially for triglycerides and cholesterol-HDL. The RMSEP values for glucose, triglycerides and cholesterol-HDL obtained through the best PLS model were 6.08, 16.07 e 2.03 mg dL-1, respectively. In the other case, for the determinations in human blood plasma, the predictions obtained by the PLS models provided unsatisfactory results with non linear tendency and presence of bias. Then, the ANN regression was applied as an alternative to PLS, considering its ability of modeling data from non linear systems. The root mean square error of monitoring (RMSEM) for glucose, triglycerides and total cholesterol, for the best ANN models, were 13.20, 10.31 e 12.35 mg dL-1, respectively. Statistical tests (F and t) suggest that NIR spectroscopy combined with multivariate regression methods (PLS and ANN) are capable to quantify the analytes (glucose, triglycerides and cholesterol) even when they are present in highly complex biological fluids, such as blood plasma

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Due to its physico-chemical and biological properties, related to the abundance and low cost of raw material, chitosan has been recognized as a material of wide application in various fields, such as in drug delivery systems. Many of these properties are associated with the presence of amino groups in its polymer chain. A proper determination of these amino groups is very important, in order to properly specify if a given chitosan sample can be used in a particular application. Thus, in this work, initially, a comparison between the determination of the deacetylation degree by conductometry and elemental analysis was carried out using a detailed analysis of error propagation. It was shown that the conductometric analysis resulted in a simple and safe method for the determining the degree of deacetylation of chitosan. Subsequently, experiments were performed to monitor and characterize the adsorption of tetracycline on chitosan particles through kinetic and equilibrium studies. The main models of kinetics and adsorption isotherms, widely used to describe the adsorption on wastewater treatment systems and the drug loading, were used to treat the experimental data. Firstly, it was shown that an apparent linear t/q(t) × t relationship did not imply in a pseudo-second-order adsorption kinetics, differently of what has been repeatedly reported in the literature. It was found that this misinterpretation can be avoided by using non-linear regression. Finally, the adsorption of tetracycline on chitosan particles was analyzed using insights obtained from theoretical analysis, and the parameters generated were used to analyze the kinetics of adsorption, the isotherm of adsorption and to ropose a mechanism of adsorption

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of this study was to evaluate the potential of near-infrared reflectance spectroscopy (NIRS) as a rapid and non-destructive method to determine the soluble solid content (SSC), pH and titratable acidity of intact plums. Samples of plum with a total solids content ranging from 5.7 to 15%, pH from 2.72 to 3.84 and titratable acidity from 0.88 a 3.6% were collected from supermarkets in Natal-Brazil, and NIR spectra were acquired in the 714 2500 nm range. A comparison of several multivariate calibration techniques with respect to several pre-processing data and variable selection algorithms, such as interval Partial Least Squares (iPLS), genetic algorithm (GA), successive projections algorithm (SPA) and ordered predictors selection (OPS), was performed. Validation models for SSC, pH and titratable acidity had a coefficient of correlation (R) of 0.95 0.90 and 0.80, as well as a root mean square error of prediction (RMSEP) of 0.45ºBrix, 0.07 and 0.40%, respectively. From these results, it can be concluded that NIR spectroscopy can be used as a non-destructive alternative for measuring the SSC, pH and titratable acidity in plums

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The calculation of tooth mass discrepancy, essential for good planning and a proper orthodontic finishing, when performed manually, besides being laborious, requires considerable time consumption. The aim of this study was to develop and test Bolton Freeware, a software for analysis of the tooth mass discrepancy of Bolton, aiming to minimize the consumption of time in a less onerous way. The digital analysis of the software was done by means of two-dimensional scanning of plaster study models and compared to manual evaluation (gold standard), using 75 pairs of stone plaster study models divided into two groups according to the magnitude of the Curve of Spee (group I from 0 to 2 mm, group II greater than 2 to 3mm). All the models had permanent dentition and were in perfect condition. The manual evaluation was performed with a digital caliper and a calculator, and the time required to perform the analysis for both methods was recorded and compared. In addition, the software was evaluated by orthodontists regarding its use, by means of questionnaires developed specifically for this purpose. Calibration was performed prior to manual analysis, and excellent levels of inter-rater agreement were achieved, with ICC > 0.75 and r > 0.9 for total and anterior proportion. It was observed in the evaluation of error of the digital method that some teeth showed a significant systematic error, being the highest measured at 0.08 mm. The analysis of total tooth mass discrepancy performed by Bolton Freeware, for those cases in which the curve of Spee is mild and moderate, differ from manual analysis, on average, 0.09 mm and 0.07 mm respectively, for each tooth evaluated, with r> 0, 8 for total and anterior proportion. According to the specificity and sensitivity test, Bolton Freeware has an improved ability to detect true negatives, i.e. the presence of discrepancy. The Bolton analysis digitally performed was faster, with an average difference of time consumed to perform the analysis of Bolton between the two methods of approximately 6 minutes. Most experts interviewed (93%) approved the usability of the software

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Context-aware applications are typically dynamic and use services provided by several sources, with different quality levels. Context information qualities are expressed in terms of Quality of Context (QoC) metadata, such as precision, correctness, refreshment, and resolution. On the other hand, service qualities are expressed via Quality of Services (QoS) metadata such as response time, availability and error rate. In order to assure that an application is using services and context information that meet its requirements, it is essential to continuously monitor the metadata. For this purpose, it is needed a QoS and QoC monitoring mechanism that meet the following requirements: (i) to support measurement and monitoring of QoS and QoC metadata; (ii) to support synchronous and asynchronous operation, thus enabling the application to periodically gather the monitored metadata and also to be asynchronously notified whenever a given metadata becomes available; (iii) to use ontologies to represent information in order to avoid ambiguous interpretation. This work presents QoMonitor, a module for QoS and QoC metadata monitoring that meets the abovementioned requirement. The architecture and implementation of QoMonitor are discussed. To support asynchronous communication QoMonitor uses two protocols: JMS and Light-PubSubHubbub. In order to illustrate QoMonitor in the development of ubiquitous application it was integrated to OpenCOPI (Open COntext Platform Integration), a Middleware platform that integrates several context provision middleware. To validate QoMonitor we used two applications as proofof- concept: an oil and gas monitoring application and a healthcare application. This work also presents a validation of QoMonitor in terms of performance both in synchronous and asynchronous requests