Extração, caracterização e atividades biológicas de proteínas da espécie cnidoscolus urens (L.) Arthur

The extraction, chemical and structural characterization of a wide variety of compounds derived from plants has been a major source of bioactive molecules. Several proteases have been isolated in the plant kingdom, with numerous pharmacological and biotechnological applications. Among the proteases isolated from plants, are the fibrinogenolytic, with relevant application in the treatment of disorders in the coagulation cascade, in addition to potential use as a tool in clinical laboratories. In this study, in addition to evaluating the effects of the protein extract of Cnidoscolus urens (L.) Arthur (Euphorbiaceae) in the coagulation cascade also investigates the presence of antimicrobial activity and characterizes the proteolytic activity detected in this extract, aiming to determine their potential pharmacological and biotechnological application. In this way, crude protein extracts obtained from the leaves of C. urens in Tris-HCl 0.05M, NaCl 0.15M, pH 7.5, were precipitated in different concentrations of acetone, and assessed for the presence of proteolytic activity in azocaseína and fibrinogen. The most active fraction (F1.0) in these tests was chosen for assessment of biological activity and biochemical characterization. The Aα chain and Bβ of fibrinogen were completely cleaved at a concentration of 0.18 μg/μL of protein fraction in 4 minutes. Fibrinogenolytic activity presented total inhibition in the presence of E-64 and partial in the presence of EDTA. The fraction demonstrated coagulant activity in plasm and reduced the APTT, demonstrating acting on the factors coagulation of the intrinsic pathway and common, not exerting effects on the PT. Fibrinolytic activity on plasma clot was detected only in SDS-PAGE in high concentrations of fraction, and there were no defibrinating. Although several proteases isolated from plants and venomous animals are classically toxic, the fraction F1.0 of C. urens not expressed hemorrhagic nor hemolytic activities. Fraction F1.0 also showed no antimicrobial activity. In proteolytic activity on the azocasein, the optimal pH was 5.0 and optimum temperature of 60ºC. The enzyme activity has been shown to be sensitive to the presence of salts tested, with inhibition for all compounds. The surfactant triton did not influence the enzyme activity, but the tween-20 and SDS inhibited the activity. In the presence of reducing agents increase in enzyme activity occurred, a typical feature of enzymes belonging to the class of cysteine proteases. Several bands with proteolytic activity were detected in zymogram, in the region of high-molecular-weight, which were inhibited by E-64. In this study, we found that C. urens presents in its constitution cysteine proteases with fibrinogenolytic and procoagulant activity, which may be isolated, with potential application in treatment of bleeding disorders, thrombolytic and clinical laboratory

A contribuição de Diké na formação do Emílio ou o papel da jurisdição constitucional na concretização do direito social à educação

The fundamental social right to education has a lengthy constitutional argument, having been declared as a right to everyone in the Title dedicated to the fundamental rights and warrants and, later, scrutinized in the Social Order Chapter exclusively devoted to this theme, where specific rights are guaranteed and fundamental duties are imposed to family, society, and state. In that which concerns education, the 1988 Constitution is the result of a historical-normative process which, since the days of the Lusitanian Empire wavering between distinct levels of protection warrants in some way the educational process. Nevertheless, not even the State s oldest commitment to education has been fully achieved, namely, the annihilation of illiteracy. Even as other fundamental social rights, education is inflicted with the lack of effective political will to reach its fulfillment, and this is reflected in the production of doctrine and jurisprudence which reduce the efficacy of these rights. The objective of this work is to analyze what part is to be played by the constitutional jurisdiction in the reversal of this picture in regards to the fulfillment of the fundamental social right to education. Therefore it is indispensable to present a proper conception of constitutional jurisdiction its objectives, boundaries and procedures and that of the social rights in the Brazilian context so as to establish its relationship from the prism of the right to education. The main existing obstacles to the effective action of constitutional jurisdiction on the ground of social rights are identified and then proposals so as to overcome them are presented. The contemplative and constructive importance of education in the shaping of the individual as well as its instrumental relevance to the achievement of the democratic ideal through the means of the shaping of the citizen is taken into account. The historical context which leads to the current Brazilian educational system is analyzed, tracing the normative area and the essential content of the fundamental right to education aiming to delineate parameters for the adequate development of the constitutional jurisdiction in the field. This jurisdiction must be neither larger nor narrower than that which has been determined by the Constitution itself. Its activity has been in turns based on a demagogic rhetoric of those fundamental rights which present a doubtful applicability, or falling short of that which has been established showing an excessive reverence to the constituent powers. It is necessary to establish dogmatic parameters for a good action of this important tool of constitutional democracy, notably in regards to the fundamental social right to education, for the sake of its instrumental role in the achievement of the democratic ideals of liberty and equality

Avaliação da capacidade para o trabalho do servidor público: um estudo de caso em uma instituição federal de ensino superior

The ability to work, considered as resulting from a dynamic process between the individual resources in relation to their work, influenced from various factors such as sociodemographic, lifestyle, aging process and requirements of work. Aiming analyze the ability to work in a population of public servants, the study analyzed 132 public servants volunteers of the infrastructure sector, in a Federal Institution of Higher Education of the state of Rio Grande do Norte, Northeast, Brazil. Data were collected through a questionnaire called the Index of Capacity for Work - ICT. The variable analysis was done by using descriptive statistics of means, standard deviations, median minimum and maximum values of the scores of quantitative variables. The joint analysis of the variables was performed by multiple linear regression. The server had low capacity to work 11 (8.33%), moderate 31 (23.48%), good 54 (40.91), and Great 28 (21.21). Multiple regression analysis, adjusted for age, sex, education, age started to work, length of service, current capacity and full of disease, showed that best explained the variation of the CTI were age, current capacity and full of disease. The survey showed that 75% of the servers showed ICT below 43, so capacity low, moderate or good and only 25% of respondents had the CTI servers over 43 points, so great capacity for work. According to the recommendations of FIOH - Finnish Institute of Occupational Health, for servers that have these scores be implemented whose objective is to restore the ability to work which is low, improving the capacity for moderate work, support the capacity for the good work and maintain the ability to work great. Therefore, we recommend that the ICT is implemented in other units of the IFES survey in the perspective of achieving a real situation of all its servers, enabling the implementation of these measures as necessary to promote recovery and health of its employees.

Assistência aos portadores de úlceras venosas: proposta de protocolo

Venous ulcers (VU), recurrent chronic wounds resulting from Chronic Venous Insufficiency (CVI), affect different age groups and would severely affect ambulation of patients. The lesions require treatment lasting and complex and are responsible for significant morbidity and mortality. Thus, this study aims to identify the important aspects covered in the scientific literature protocol for assisting patients with venous ulcers, identifying the issues to be proposed by the judges of the study (nurses, doctors and physiotherapists) to the protocol of care provided to patients venous ulcers and present the structure of protocol proposed by the judges of the study to assist patients with venous ulcers treated at a referral hospital of Rio Grande do Norte. This is a descriptive study using a quantitative approach, carried out at the dressings, located in the outpatient surgical clinic of the Hospital University Onofre Lopes (HUOL), located in East Sanitary District, Natal-RN. The sample consisted of 39 professionals, 30 nurses, seven doctors and two physical therapists, team members HUOL surgical clinic and other public and private institutions of Rio Grande do Norte and Jequié/Bahia. These professionals were the judges responsible for selecting the guidelines already proposed in the literature on VU protocols. Approved by the Ethics in Research HUOL (Report n.o 081/07), began the first stage of the study which consisted of reviewing the scientific literature about the relevant aspects to be included in a protocol for assisting patients with VU. These aspects were organized into a proposed questionnaire to the judges of the study. Following examination, held on the content validation with application of the Kappa (K), accepting a score higher than 0.80 and the Likert Scale, whereas rates from 4.0 to 5.0. The data collected were organized in Microsoft Excel and exported into Statistical Package for Social Sciences (SPSS) 15.0. The literature review included national and international scientific articles, thesis, dissertation and institutional protocols. Regarding the characterization of professional nurses predominated (76.1%), between 34 and 45 years (41.0%), female (79.5%), married/consensual union (46.2%), with specialization in VU care (61.5%), working in the hospital network (46.1%), with up to 5 years experience in VU (69.2%) and claiming to feel prepared to care for these injuries (92.3 %). With regard to aspects that had very good agreement (K ≥ 0.81), remained the items found in the literature with some modifications. In the analysis of the proposed evaluation items had very important, ranging from 4.1 (drug treatment) to 4.9 (patient assessment and care of the injury and the injured and perilesional skin). The proposition of the protocol is arranged in eleven items: A) Evaluation of patient and lesion, B) Registration and documentation, C) the wound and perilesional skin, D) an indication of coverage, E) Use of antibiotic and pain treatment, F) Surgical treatment of CVI, G) Drug treatment, H) Improving venous return and prevetion of recurrence, I) Referral of patients, J) Training and K) Reference and counter reference

Qualidade de vida em gestantes no contexto na Estratégia Saúde da Família

The pregnancy as a process in woman's life requires several biological, psychological, relational and socio-cultural changes for the preparation for motherhood. By modifying its capacity and, at the expense of these factors, it is observed that the physical, social and emotional problems experienced by women during pregnancy can affect their quality of life, especially related to health. It had as objectives of this research verifying the quality of life of women in the context of the Family Health Strategy in a municipality in Paraíba, in order to characterize the sociodemographic aspects, lifestyle habits, and obstetric care of pregnant women and to characterize the fields of quality of life of pregnant women according to the WHOQOL-bref. This is a descriptive exploratory study with cross-sectional and quantitative approach. The population consisted of 120 pregnant women in primary care in the municipality of Sousa-PB. Data collection occurred over a period of two months by the own master's degree student and two nursing students in applying a standard form about sociodemographic characteristics, and obstetric care and the WHOQOL-bref instrument. The data collected were organized into an electronic database of the Microsoft Excel application, coded, tabulated and presented in tables, charts and figures with their respective percentage distributions. Of the surveyed, the predominant were age group of 20 to 25 years, Catholic religion, with a steady partner, low education, no employment, wage income of 01 minimum wage. As for the data and obstetric care, almost all had never aborted and reported to the care received as excellent. The most frequent complaints were back pain and in lower abdomen. Regarding quality of life according to the WHOQOL-bref, dissatisfactions that predominated in the areas were in the physical pain and discomfort, sleep, rest, energy and fatigue. In the psychological domain, body image and appearance, memory, concentration and negative feelings. In the field of social relationships, sexual activity and the environment domain, the greatest dissatisfaction with facets scored: financial resources, leisure opportunities and transport. It is concluded that the quality of life of the users interviewed were deemed unsatisfactory for these facets, indicating that assistance to this target audience should be done comprehensively and holistically, in order to accommodate the affected facets to improve the quality of life pregnant women attended in primary care

Validação de instrumentos para avaliação do conhecimento e da habilidade acerca da punção venosa periférica com cateter agulhado

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Estabilização de um Solo com Cimento e Cinza de Lodo Para Uso em Pavimentos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Controle on-line do número de não-conformidades por itens em uma produção finita

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Análise comparativa dos métodos de fatores ponderados na seleção de áreas para aterros sanitários

This study presents a comparative analysis of methodologies about weighted factors considered in the selection of areas for deployment of Sanitary Landfills, applying the methodologies of classification criteria with scoring bands Gomes, Coelho, Erba & Veronez (2000); Waquil et al, 2000. That means, we have the Scoring System used by Union of Municipalities of Bahia and the Quality Index Landfill Waste (IQR) which are applyed for this study in Massaranduba Sanitary Landfill located in the municipality of Ceará Mirim /RN, northeastern of Brazil. The study was conducted in order to classify the methodologies and to give support for future studies on environmental management segment, with main goal to propose suited methodologies which allow safety and rigor during the selection, deployment and management of sanitary landfill, in the Brazilian municipalities, in order to help them in the process to extinction of their dumps, in according of Brazilian Nacional Plan of Solid Waste. During this investigation we have studied the characteristics of the site as morphological, hydrogeological, environmental and socio-economic to permit the installation. We consider important to mention the need of deployment from Rio Grande do Norte State Secretary of Environment and Water (SEMARH), Institute of Sustainable Development and Environment of RN (IDEMA), as well, from Federal and Municipal Governments a public policies for the integrated management of urban solid waste that address environmental preservation and improvement of health conditions of the population of the Rio Grande do Norte

Um protocolo de comunicação multicast na camada de aplicação com Consciência de Localização

Internet applications such as media streaming, collaborative computing and massive multiplayer are on the rise,. This leads to the need for multicast communication, but unfortunately group communications support based on IP multicast has not been widely adopted due to a combination of technical and non-technical problems. Therefore, a number of different application-layer multicast schemes have been proposed in recent literature to overcome the drawbacks. In addition, these applications often behave as both providers and clients of services, being called peer-topeer applications, and where participants come and go very dynamically. Thus, servercentric architectures for membership management have well-known problems related to scalability and fault-tolerance, and even peer-to-peer traditional solutions need to have some mechanism that takes into account member's volatility. The idea of location awareness distributes the participants in the overlay network according to their proximity in the underlying network allowing a better performance. Given this context, this thesis proposes an application layer multicast protocol, called LAALM, which takes into account the actual network topology in the assembly process of the overlay network. The membership algorithm uses a new metric, IPXY, to provide location awareness through the processing of local information, and it was implemented using a distributed shared and bi-directional tree. The algorithm also has a sub-optimal heuristic to minimize the cost of membership process. The protocol has been evaluated in two ways. First, through an own simulator developed in this work, where we evaluated the quality of distribution tree by metrics such as outdegree and path length. Second, reallife scenarios were built in the ns-3 network simulator where we evaluated the network protocol performance by metrics such as stress, stretch, time to first packet and reconfiguration group time

Metodologia estatística na solução do problema do caixeiro viajante e na avaliação de algoritmos : um estudo aplicado à transgenética computacional

The problems of combinatory optimization have involved a large number of researchers in search of approximative solutions for them, since it is generally accepted that they are unsolvable in polynomial time. Initially, these solutions were focused on heuristics. Currently, metaheuristics are used more for this task, especially those based on evolutionary algorithms. The two main contributions of this work are: the creation of what is called an -Operon- heuristic, for the construction of the information chains necessary for the implementation of transgenetic (evolutionary) algorithms, mainly using statistical methodology - the Cluster Analysis and the Principal Component Analysis; and the utilization of statistical analyses that are adequate for the evaluation of the performance of the algorithms that are developed to solve these problems. The aim of the Operon is to construct good quality dynamic information chains to promote an -intelligent- search in the space of solutions. The Traveling Salesman Problem (TSP) is intended for applications based on a transgenetic algorithmic known as ProtoG. A strategy is also proposed for the renovation of part of the chromosome population indicated by adopting a minimum limit in the coefficient of variation of the adequation function of the individuals, with calculations based on the population. Statistical methodology is used for the evaluation of the performance of four algorithms, as follows: the proposed ProtoG, two memetic algorithms and a Simulated Annealing algorithm. Three performance analyses of these algorithms are proposed. The first is accomplished through the Logistic Regression, based on the probability of finding an optimal solution for a TSP instance by the algorithm being tested. The second is accomplished through Survival Analysis, based on a probability of the time observed for its execution until an optimal solution is achieved. The third is accomplished by means of a non-parametric Analysis of Variance, considering the Percent Error of the Solution (PES) obtained by the percentage in which the solution found exceeds the best solution available in the literature. Six experiments have been conducted applied to sixty-one instances of Euclidean TSP with sizes of up to 1,655 cities. The first two experiments deal with the adjustments of four parameters used in the ProtoG algorithm in an attempt to improve its performance. The last four have been undertaken to evaluate the performance of the ProtoG in comparison to the three algorithms adopted. For these sixty-one instances, it has been concluded on the grounds of statistical tests that there is evidence that the ProtoG performs better than these three algorithms in fifty instances. In addition, for the thirty-six instances considered in the last three trials in which the performance of the algorithms was evaluated through PES, it was observed that the PES average obtained with the ProtoG was less than 1% in almost half of these instances, having reached the greatest average for one instance of 1,173 cities, with an PES average equal to 3.52%. Therefore, the ProtoG can be considered a competitive algorithm for solving the TSP, since it is not rare in the literature find PESs averages greater than 10% to be reported for instances of this size.

Algoritmos genéticos: uso de lógica nebulosa e análise de convergência por cadeia de Markov

In this work, the Markov chain will be the tool used in the modeling and analysis of convergence of the genetic algorithm, both the standard version as for the other versions that allows the genetic algorithm. In addition, we intend to compare the performance of the standard version with the fuzzy version, believing that this version gives the genetic algorithm a great ability to find a global optimum, own the global optimization algorithms. The choice of this algorithm is due to the fact that it has become, over the past thirty yares, one of the more importan tool used to find a solution of de optimization problem. This choice is due to its effectiveness in finding a good quality solution to the problem, considering that the knowledge of a good quality solution becomes acceptable given that there may not be another algorithm able to get the optimal solution for many of these problems. However, this algorithm can be set, taking into account, that it is not only dependent on how the problem is represented as but also some of the operators are defined, to the standard version of this, when the parameters are kept fixed, to their versions with variables parameters. Therefore to achieve good performance with the aforementioned algorithm is necessary that it has an adequate criterion in the choice of its parameters, especially the rate of mutation and crossover rate or even the size of the population. It is important to remember that those implementations in which parameters are kept fixed throughout the execution, the modeling algorithm by Markov chain results in a homogeneous chain and when it allows the variation of parameters during the execution, the Markov chain that models becomes be non - homogeneous. Therefore, in an attempt to improve the algorithm performance, few studies have tried to make the setting of the parameters through strategies that capture the intrinsic characteristics of the problem. These characteristics are extracted from the present state of execution, in order to identify and preserve a pattern related to a solution of good quality and at the same time that standard discarding of low quality. Strategies for feature extraction can either use precise techniques as fuzzy techniques, in the latter case being made through a fuzzy controller. A Markov chain is used for modeling and convergence analysis of the algorithm, both in its standard version as for the other. In order to evaluate the performance of a non-homogeneous algorithm tests will be applied to compare the standard fuzzy algorithm with the genetic algorithm, and the rate of change adjusted by a fuzzy controller. To do so, pick up optimization problems whose number of solutions varies exponentially with the number of variables

Uma contribuição à solução do problema dos k-servos usando aprendizagem por reforço

Neste trabalho é proposto um novo algoritmo online para o resolver o Problema dos k-Servos (PKS). O desempenho desta solução é comparado com o de outros algoritmos existentes na literatura, a saber, os algoritmos Harmonic e Work Function, que mostraram ser competitivos, tornando-os parâmetros de comparação significativos. Um algoritmo que apresente desempenho eficiente em relação aos mesmos tende a ser competitivo também, devendo, obviamente, se provar o referido fato. Tal prova, entretanto, foge aos objetivos do presente trabalho. O algoritmo apresentado para a solução do PKS é baseado em técnicas de aprendizagem por reforço. Para tanto, o problema foi modelado como um processo de decisão em múltiplas etapas, ao qual é aplicado o algoritmo Q-Learning, um dos métodos de solução mais populares para o estabelecimento de políticas ótimas neste tipo de problema de decisão. Entretanto, deve-se observar que a dimensão da estrutura de armazenamento utilizada pela aprendizagem por reforço para se obter a política ótima cresce em função do número de estados e de ações, que por sua vez é proporcional ao número n de nós e k de servos. Ao se analisar esse crescimento (matematicamente, ) percebe-se que o mesmo ocorre de maneira exponencial, limitando a aplicação do método a problemas de menor porte, onde o número de nós e de servos é reduzido. Este problema, denominado maldição da dimensionalidade, foi introduzido por Belmann e implica na impossibilidade de execução de um algoritmo para certas instâncias de um problema pelo esgotamento de recursos computacionais para obtenção de sua saída. De modo a evitar que a solução proposta, baseada exclusivamente na aprendizagem por reforço, seja restrita a aplicações de menor porte, propõe-se uma solução alternativa para problemas mais realistas, que envolvam um número maior de nós e de servos. Esta solução alternativa é hierarquizada e utiliza dois métodos de solução do PKS: a aprendizagem por reforço, aplicada a um número reduzido de nós obtidos a partir de um processo de agregação, e um método guloso, aplicado aos subconjuntos de nós resultantes do processo de agregação, onde o critério de escolha do agendamento dos servos é baseado na menor distância ao local de demanda

Algoritmos genéticos aplicados a um comitê de LS-SVM em problemas de classificação

The pattern classification is one of the machine learning subareas that has the most outstanding. Among the various approaches to solve pattern classification problems, the Support Vector Machines (SVM) receive great emphasis, due to its ease of use and good generalization performance. The Least Squares formulation of SVM (LS-SVM) finds the solution by solving a set of linear equations instead of quadratic programming implemented in SVM. The LS-SVMs provide some free parameters that have to be correctly chosen to achieve satisfactory results in a given task. Despite the LS-SVMs having high performance, lots of tools have been developed to improve them, mainly the development of new classifying methods and the employment of ensembles, in other words, a combination of several classifiers. In this work, our proposal is to use an ensemble and a Genetic Algorithm (GA), search algorithm based on the evolution of species, to enhance the LSSVM classification. In the construction of this ensemble, we use a random selection of attributes of the original problem, which it splits the original problem into smaller ones where each classifier will act. So, we apply a genetic algorithm to find effective values of the LS-SVM parameters and also to find a weight vector, measuring the importance of each machine in the final classification. Finally, the final classification is obtained by a linear combination of the decision values of the LS-SVMs with the weight vector. We used several classification problems, taken as benchmarks to evaluate the performance of the algorithm and compared the results with other classifiers

Biomecânica e otimização topológica com H-adaptatividade em implantes dentários nitretados a plasma em cátodo oco

In recent years there has been a significant growth in technologies that modify implant surfaces, reducing healing time and allowing their successful use in areas with low bone density. One of the most widely used techniques is plasma nitration, applied with excellent results in titanium and its alloys, with greater frequency in the manufacture of hip, ankle and shoulder implants. However, its use in dental implants is very limited due to high process temperatures (between 700 C o and 800 C o ), resulting in distortions in these geometrically complex and highly precise components. The aim of the present study is to assess osseointegration and mechanical strength of grade II nitrided titanium samples, through configuration of hollow cathode discharge. Moreover, new formulations are proposed to determine the optimum structural topology of the dental implant under study, in order to perfect its shape, make it efficient, competitive and with high definition. In the nitriding process, the samples were treated at a temperature of 450 C o and pressure of 150 Pa , during 1 hour of treatment. This condition was selected because it obtains the best wettability results in previous studies, where different pressure, temperature and time conditions were systematized. The samples were characterized by X-ray diffraction, scanning electron microscope, roughness, microhardness and wettability. Biomechanical fatigue tests were then conducted. Finally, a formulation using the three dimensional structural topology optimization method was proposed, in conjunction with an hadaptive refinement process. The results showed that plasma nitriding, using the hollow cathode discharge technique, caused changes in the surface texture of test specimens, increases surface roughness, wettability and microhardness when compared to the untreated sample. In the biomechanical fatigue test, the treated implant showed no flaws, after five million cycles, at a maximum fatigue load of 84.46 N. The results of the topological optimization process showed well-defined optimized layouts of the dental implant, with a clear distribution of material and a defined edge