Efeitos de diferentes tipos estressores sobre a memória e aprendizagem de ratas

The exposure to stressors produces physiological changes of the organism in order to adapt the individual to the environment. Depending on the type, intensity and duration, stress can affect some cognitive functions, particularly processes of learning and memory. Several studies have also proposed that some level of anxiety would be necessary for memory formation. In this context, memories of previously aversive experiences may determine the manner and intensity with which are expressed fear responses, which explains the great interest in analyzing both anxiety and memory in animals. In addition, males and females demonstrate different reactions in relation to stressful stimuli, showing different levels of anxiety and differences in processing of the acquisition, retention and recall of information. Based on this information, the present study aimed to verify the effect of stress on learning, memory and anxiety behavioral parameters in rats exposed at different types of stressors of long duration (seven consecutive days): restraint (4h/day), overcrowding (18h/day) and social isolation (18h/day) in the different phases of the estrous cycle. Our results showed that the stress induced by restraint and social isolation did not cause changes in the acquisition process, but impaired the recall of memory in rats. Furthermore, it is suggested a protective effect of sex hormones on retrieval of aversive memory, since female rats in proestrus or estrus phase, characterized by high estrogen concentrations, showed no aversive memory deficits. Furthermore, despite the increased plasma levels of corticosterone observed in female rats subjected to restraint stress and social isolation, anxiety levels were unaltered, compared to those various stress conditions. Animal models based on psychological and social stress have been extensively discussed in the literature. Correlate behavioral responses, physiological and psychological have contributed in increasing the understanding of stress-induced psychophysiological disorders

Saúde psíquica e condições de trabalho dos profissionais de saúde nos hospitais da Universidade Federal do Rio Grande do Norte

A tese se propôs a avaliar a relação entre saúde psíquica e condições de trabalho em dois hospitais da Universidade Federal do Rio Grande do Norte, a saber: Hospital Universitário Onofre Lopes e Hospital Universitário Ana Bezerra. Adotou como ponto de partida epistemológico a abordagem psicossociológica, considerando que a compreensão sócio-histórica do contexto é indispensável para entender os fenômenos em análise. As condições de trabalho e a saúde psíquica foram abordadas interdisciplinarmente, fundamentando a construção de um modelo compreensivo de saúde psíquica que orientou a investigação. O caminho metodológico utilizado foi a pesquisação. Essa foi desenvolvida, utilizando técnicas como análise documental, observação participante, entrevistas não estruturadas, grupo focal e aplicação de um protocolo de pesquisa composto pelo questionário de condições de trabalho, pelo Questionário de Saúde Geral (QSG-60), pela Escala de Bem-Estar Afetivo no Trabalho (JAWS-12) e por questões sociodemográficas. A análise dos resultados mostrou que os escores sintomáticos de saúde psíquica variam por hospitais e que a saúde psíquica sofre influência das condições de trabalho, sobretudo em aspectos referentes a três dimensões: condições físicas e materiais; processos e características do trabalho e o ambiente sociogerencial. Em referência à primeira dessas dimensões, destacaram-se a exposição aos riscos psicobiológicos e de acidentes, bem como as exigências de esforço físico. Na segunda dimensão, a complexidade das atividades e a responsabilidade implicada nas mesmas. E, na última, os fatores de organização da atividade, violência e ambiente conflitivo. Como a relação do indivíduo com seu contexto é dialética, os resultados encontrados corroboraram que quanto mais as condições de trabalho são desfavoráveis, maior a afetação da saúde psíquica e dos afetos com relação ao trabalho, repercutindo novamente no ambiente de trabalho. Portanto, ações de melhoria das condições de trabalho precisam ser estabelecidas para resultar, no efeito inverso, proporcionando o aumento dos afetos positivos e a redução dos sintomas psíquicos

A relação juventude-trabalho no projovem integrado do município de Natal/RN

The National Program for Youth Inclusion (ProJovem) has been created in 2005 in order to break the reproductive cycle of social inequality, through the improvement of the basic education and the professional qualification. Therefore, our objective is to discuss how the categories youth-work are inserted and implemented on ProJovem Integrado , which could be translated as Integrated , in Natal/RN. In 2008, ProJovem is has started to be executed based in four modalities: (1) Teenagers Socio-Educational Service, (2) Urban, (3) Worker and (4) Countryside Land Knowledge, aiming to serve a population from 15 to 29 years old who were seldom helped by specifics policies so far. In order to implement this research, three semi-structured interviews have been made, as well as observations at the program units and analysis of the official documents. In Natal, the operating modalities are: ProJovem Urban, which three units, divided in two districts of the city; the ProJovem Teenagers , which has ten units on Natal s four administrative regions; and ProJovem Worker , which were still structuring its courses until the beginning of the data collection. The data has been qualitatively analyzed through the Marxian Theory, tied to the Constant Comparative Method. The referred approach, based on the Grounded Theory, enables the understanding of the phenomenon s meanings through the perspective of the participants. The neighborhoods in which ProJovem s units are inserted has been characterized as well the Program s target. The results have been presented in three blocks: a) the modality s structure, which includes the implementation, functioning and operationalization of the activities; b) management of the modality s management, concerned to the main difficulties, expectations and functions; and c) the relation youth-work at the modalities. About the objectives and qualification and insertion goals, there is incongruence at the offer of occupational arches. We have observed that offered occupations are historically subservient and precarious. Hence they do not promote significant changes on the students career paths by usually inserting them into informal jobs or underemployments. Besides that, the professional qualification is very incipient. For that reason, it does not go with the necessary requirements to enable the youngster to enter the work world. It is considered that other researches are necessary to for better understanding of the remaining aspects of the relation youth-work

A percepção de suporte organizacional dos novos servidores da Universidade Federal do Rio Grande do Norte

This work deals with organizational support perception-OSP. This is done considering staff global beliefs, value of their contributions, care and well being related of individuals in an organization. These issues has been have been present in many researches since the 80s. It is important to analyze this matter considering all the changes that occurred nationally and internationally in the academic environment, characterized as being diversified in academic and managerial level. This occurs especially in Brazil since Federal Universities and their agents have suffered impact and restructuring. The research has emphasized the technical-managerial as well as professor staff level at Universidade Federal do Rio Grande do Norte aiming to deal with their unsatisfaction upon social political support. Thus, there was participation of 259 staff that were admitted from 2003 to 2005 in many sectors and units of the university. These subjects were submitted to a social and demographical query through an application of a scale of organizational support perception-OSP. Descriptive and multivariate analysis was done considering factors (management style of higher command), material support, wages, work overload, social support at work and ascending levels). Results show that there a hierarchy of the analyzed factors, the factor social support at work as being the first one with 3,31%, the factor management style of the higher command in second with 3,30%, then followed by the factor social support at work with 2,92%, in a sequence the factor material support, factor overload with 2,49% in the fourth position, and in the fifth place, the factor ascending with an average of 2,33% and in last the factor wages with 2,20%. It is concluded that the factors related to the more positive attributions of the OSP (social support at work), in a sequence material support opposing from the most negative factors of the OSP (wages, overload, ascending) reveal a reality that points out that the OSP is very much related to the individualized actions of the members of the organization (leader-member-group) rather than on structure and institutionalized actions carried out at UFRN

Avaliação da síntese e caracterização de zeólita ZSM-5 ausente de direcionador orgânico estrutural

The catalytic processes play a vital role in the worldwide economy, a business that handles about US$ 13 billion per year because the value of products depends on the catalytic processes, including petroleum products, chemicals, pharmaceuticals, synthetic rubbers and plastics, among others. The zeolite ZSM-5 is used as catalyst for various reactions in the area petrochemical, petroleum refining and fine chemicals, especially the reactions of cracking, isomerization, alkylation, aromatization of olefins, among others. Many researchers have studied the hydrothermal synthesis of zeolite ZSM-5 free template and they obtained satisfactory results, so this study aims to evaluate the hydrothermal synthesis and the physicochemical properties of ZSM-5 with the presence and absence of template compared with commercial ZSM-5. The methods for hydrothermal synthesis of zeolite ZSM-5 are of scientific knowledge, providing the chemical composition required for the formation of zeolitic structure in the presence and absence of template. Samples of both zeolites ZSM-5 in protonic form were obtained by heat treatment and ion exchange, according to procedures reported in the literature. The sample of commercial ZSM-5 was acquired by the company Sentex Industrial Ltda. All samples were characterized by XRD, SEM, FTIR, TG / DTG / DSC, N2 adsorption and desorption and study of acidity by thermo-desorption of probe molecule (n-butylamine), in order to understand their physicochemical properties. The efficiency of the methods applied in this work and reported in the literature has been proved by well-defined structure of ZSM-5. According as the evaluation of physicochemical properties, zeolite ZSM-5 free template becomes promising for application in the refining processes or use as catalytic support, since its synthesis reduces environmental impacts and production costs

Hidrofobização, caracterização e aplicação da vermiculita para remoção de óleo insolúvel em água

Among the various layered silicates, vermiculite has been used as one of the adsorbent material by presenting the ion exchange capacity which facilitates the removal of organic compounds which are potential pollutants in relation to the water surface. The importance of the modification of clay minerals by hydrophobization with carnauba wax establishes the increase in oil removal capacity in aqueous medium, it contributes to a better environment for life in ecosystems. The vermiculite when expanded decreases its hydrophobicity requiring the use of a hydrophobizing leaving - the organoclay. In this work were used in the process of modifying the particle sizes of vermiculite -18+16, -16 +20 and -20 +35 #. Samples of vermiculite hydrophobized with carnauba wax and clay mineral without hydrophobizing were characterized with physicochemical analyzes and analytical. Techniques were used: thermal analysis (thermogravimetry and derivative thermogravimetry), infrared spectroscopy, scanning electron microscopy, fluorescence rays - x adsorption tests. The TG / DTG was used to evaluate the thermal behavior of expanded vermiculite and carnauba wax and samples hidrofobizadas with percentages of 5, 10 and 15 % by weight of hydrophobizing. The results of FTIR confirmed increase of the characteristic signs of carnauba wax in samples hidrofobizadas as the greatest amount of hydrophobizing the clay mineral used in hydrophobization. Thermogravimetry and FTIR show based on the results that coating the surface of the vermiculite occur homogeneously. The data obtained by the technique of x-ray fluorescence with loss on ignition confirmed the results of thermogravimetric analysis in relation to the percentage of wax incorporated. The fluorescence indicates through information provided by the analysis shows that the material covered - is homogeneous. The mev inspection was used to texture and morphology of the clay mineral with and without carnauba wax. The scanning electron microscopy confirms the deposition of wax evenly over the surface of the mineral as indicated by the other techniques. To verify the adsorption capacity of the clay without hydrophobizing hydrophobized and used a fixed volume of water to 1 ½ liters in each experiment with 3 g to 50 g of oil sample. The results show that better extraction of oil for the material processed corresponds to 260 % relative to the weight of the sample coated and greater than 80 % of the oil drop in the system

Síntese de zeólitas tipo ton utilizando um sal de imidazólio como agente direcionador de estrutura

This work reports the synthesis of zeolites with different compositions (pure silica, Si/Ti and Si/Al), via hydroxide and fluoride medium using the cation 1-butyl-3- methylimidazolium as structure directing agent. Initially, the cation was synthesized in chloride form and used for the synthesis in hydroxide medium. An anion-exchange (Cl- for OH-) was required for the synthesis in fluoride medium. Different reactants were used for the formation of gels synthesis, resulting in the crystallization of MFI and TON phases, the latter predominant in many compositions. The cation and synthesized zeolites obtained were characterized by different techniques such as NMR, TG/DTG, XRD, SEM, N2 adsorption and desorption, DRS and EPMA. Besides characterizing the cation and zeolites, the mother liquor of hydroxide synthesis was characterized and it was possible to observe a modification of the cation in the synthesis conditions employed. The materials synthesized in this work can be applied in catalytic reactions and adsorption

Produção e validação de um indicador de saúde bucal para idosos a partir de dados secundários do SB Brasil 2010

Dentre os vários aspectos da saúde do idoso, a saúde bucal merece atenção especial pelo fato de que, historicamente, nos serviços odontológicos, não se considera esse grupo populacional como prioridade de atenção. Por isso, se faz necessária a produção de um indicador multidimensional capaz de mensurar todas as alterações bucais encontradas em um idoso, facilitando a categorização da saúde bucal como um todo. Tal indicador representará um importante instrumento capaz de elencar prioridades de atenção voltadas à população idosa. Portanto, o estudo em questão propõe a produção e validação de um indicador de saúde bucal a partir dos dados secundários coletados pelo projeto SB Brasil 2010 referente ao grupo etário de 65 a 74 anos. A amostra foi representada pelos 7619 indivíduos do grupo etário de 65 a 74 anos que participaram da pesquisa nas 5 (cinco) regiões do Brasil. Tais indivíduos foram submetidos à avaliação epidemiológica das condições de saúde bucal, a partir dos índices CPO-d, CPI e PIP. Além disso, verificou-se o uso e necessidade de prótese, bem como características sociais, econômicas e demográficas. Uma análise fatorial identificou um número relativamente pequeno de fatores comuns, através da análise de componentes principais. Após a nomenclatura dos fatores, foi realizada a soma dos escores fatoriais por indivíduo. Por último, a dicotomização dessa soma nos forneceu o indicador de saúde bucal proposto. Para esse estudo foram incluídas na análise fatorial 12 variáveis de saúde bucal oriundas do banco de dados do SB Brasil 2010 e, também 3 variáveis socioeconômicas e demográficas. Com base no critério de Kaiser, observa-se que foram retidos cinco fatores que explicaram 70,28% da variância total das variáveis incluídas no modelo. O fator 1 (um) explica sozinho 32,02% dessa variância, o fator 2 (dois) 14,78%, enquanto que os fatores 3 (três), 4 (quatro) e 5 (cinco) explicam 8,90%, 7,89% e 6,68%, respectivamente. Por meio das cargas fatoriais, o fator um foi denominado dente hígido e pouco uso de prótese , o dois doença periodontal presente , o três necessidade de reabilitação , já o quarto e quinto fator foram denominados de cárie e condição social favorável , respectivamente. Para garantir a representatividade do indicador proposto, realizou-se uma segunda análise fatorial em uma subamostra da população de idosos investigados. Por outro lado, a aplicabilidade do indicador produzido foi testada por meio da associação do mesmo com outras variáveis do estudo. Por fim, Cabe ressaltar que, o indicador aqui produzido foi capaz de agregar diver sas informações a respeito da saúde bucal e das condições sociais desses indivíduos, traduzindo assim, diversos dados em uma informação simples, que facilita o olhar dos gestores de saúde sobre as reais necessidades de intervenções em relação à saúde bucal de determinada população

Agraphs: definição, implementação e suas ferramentas

Programs manipulate information. However, information is abstract in nature and needs to be represented, usually by data structures, making it possible to be manipulated. This work presents the AGraphs, a representation and exchange format of the data that uses typed directed graphs with a simulation of hyperedges and hierarchical graphs. Associated to the AGraphs format there is a manipulation library with a simple programming interface, tailored to the language being represented. The AGraphs format in ad-hoc manner was used as representation format in tools developed at UFRN, and, to make it more usable in other tools, an accurate description and the development of support tools was necessary. These accurate description and tools have been developed and are described in this work. This work compares the AGraphs format with other representation and exchange formats (e.g ATerms, GDL, GraphML, GraX, GXL and XML). The main objective this comparison is to capture important characteristics and where the AGraphs concepts can still evolve

Computabilidade no espaço dos intervalos reais: um modelo BSS intervalar

A matemática intervalar é uma teoria matemática originada na década de 60 com o objetivo de responder questões de exatidão e eficiência que surgem na prática da computação científica e na resolução de problemas numéricos. As abordagens clássicas para teoria da computabilidade tratam com problemas discretos (por exemplo, sobre os números naturais, números inteiros, strings sobre um alfabeto finito, grafos, etc.). No entanto, campos da matemática pura e aplicada tratam com problemas envolvendo números reais e números complexos. Isto acontece, por exemplo, em análise numérica, sistemas dinâmicos, geometria computacional e teoria da otimização. Assim, uma abordagem computacional para problemas contínuos é desejável, ou ainda necessária, para tratar formalmente com computações analógicas e computações científicas em geral. Na literatura existem diferentes abordagens para a computabilidade nos números reais, mas, uma importante diferença entre estas abordagens está na maneira como é representado o número real. Existem basicamente duas linhas de estudo da computabilidade no contínuo. Na primeira delas uma aproximação da saída com precisão arbitrária é computada a partir de uma aproximação razoável da entrada [Bra95]. A outra linha de pesquisa para computabilidade real foi desenvolvida por Blum, Shub e Smale [BSS89]. Nesta aproximação, as chamadas máquinas BSS, um número real é visto como uma entidade acabada e as funções computáveis são geradas a partir de uma classe de funções básicas (numa maneira similar às funções parciais recursivas). Nesta dissertação estudaremos o modelo BSS, usado para se caracterizar uma teoria da computabilidade sobre os números reais e estenderemos este para se modelar a computabilidade no espaço dos intervalos reais. Assim, aqui veremos uma aproximação para computabilidade intervalar epistemologicamente diferente da estudada por Bedregal e Acióly [Bed96, BA97a, BA97b], na qual um intervalo real é visto como o limite de intervalos racionais, e a computabilidade de uma função intervalar real depende da computabilidade de uma função sobre os intervalos racionais

Um ambiente para especificação e execução AD-HOC de processos de negócio baseados em serviços Web

Recently the focus given to Web Services and Semantic Web technologies has provided the development of several research projects in different ways to addressing the Web services composition issue. Meanwhile, the challenge of creating an environment that provides the specification of an abstract business process and that it is automatically implemented by a composite service in a dynamic way is considered a currently open problem. WSDL and BPEL provided by industry support only manual service composition because they lack needed semantics so that Web services are discovered, selected and combined by software agents. Services ontology provided by Semantic Web enriches the syntactic descriptions of Web services to facilitate the automation of tasks, such as discovery and composition. This work presents an environment for specifying and ad-hoc executing Web services-based business processes, named WebFlowAH. The WebFlowAH employs common domain ontology to describe both Web services and business processes. It allows processes specification in terms of users goals or desires that are expressed based on the concepts of such common domain ontology. This approach allows processes to be specified in an abstract high level way, unburdening the user from the underline details needed to effectively run the process workflow

Uma abordagem para promover o alinhamento entre a estratégia de negócio e a tecnologia de informação

Currently with the increase in complexity in doing business, organizations are seeking information systems that help to quickly respond to new demands in the processes of production of products and services. An information system is no longer just a support tool and has become an integral part of doing business. However, in spite of significant technological evolution in recent years, information systems that support business do not respond efficiently to the constant alterations that occur in many organizations. One of the main problems faced by information systems currently is the lack of strategic alignment between business strategy and information technology. The concept of strategic alignment can be defined as a way between business strategies and objectives and the strategies, objectives and functions of information technology in such as way as to contribute to the increase in competitivity of the organization over time. Strategic alignment together with strategic planning are important management instruments. Approaches for operationalizing this alignment are being developed currently but are still in their initial stages due to the fact that it is a relatively new concept in the literature. Another point that needs to be taken into consideration during the strategic alignment is the question of trackability between the business elements and IT. Trackability (Tracking) is necessary for example when one wishes to know exactly which goal defined in the business strategy was left out or not accepted due to a modification made in the IT strategy. Very few proposals present concrete ways supported by software systems in order to obtain strategic alignement while taking into consideration this trackability. Therefore the objective of this work is to propose the creation of a strategic alignment process supported by a software system which is capable of permitting trackability between the organizational objectives and the business processes based on formalization standards defined through a model oriented approach

Sistema especialista fuzzy para dimensionamento de bombeio mecânico

Despite the emergence of other forms of artificial lift, sucker rod pumping systems remains hegemonic because of its flexibility of operation and lower investment cost compared to other lifting techniques developed. A successful rod pumping sizing necessarily passes through the supply of estimated flow and the controlled wear of pumping equipment used in the mounted configuration. However, the mediation of these elements is particularly challenging, especially for most designers dealing with this work, which still lack the experience needed to get good projects pumping in time. Even with the existence of various computer applications on the market in order to facilitate this task, they must face a grueling process of trial and error until you get the most appropriate combination of equipment for installation in the well. This thesis proposes the creation of an expert system in the design of sucker rod pumping systems. Its mission is to guide a petroleum engineer in the task of selecting a range of equipment appropriate to the context provided by the characteristics of the oil that will be raised to the surface. Features such as the level of gas separation, presence of corrosive elements, possibility of production of sand and waxing are taken into account in selecting the pumping unit, sucker-rod strings and subsurface pump and their operation mode. It is able to approximate the inferente process in the way of human reasoning, which leads to results closer to those obtained by a specialist. For this, their production rules were based on the theory of fuzzy sets, able to model vague concepts typically present in human reasoning. The calculations of operating parameters of the pumping system are made by the API RP 11L method. Based on information input, the system is able to return to the user a set of pumping configurations that meet a given design flow, but without subjecting the selected equipment to an effort beyond that which can bear

Arquitetura com elevada taxa de processamento e reduzida largura de banda de memória para a estimação de movimento em vídeos digitais

Nowadays several electronics devices support digital videos. Some examples of these devices are cellphones, digital cameras, video cameras and digital televisions. However, raw videos present a huge amount of data, millions of bits, for their representation as the way they were captured. To store them in its primary form it would be necessary a huge amount of disk space and a huge bandwidth to allow the transmission of these data. The video compression becomes essential to make possible information storage and transmission. Motion Estimation is a technique used in the video coder that explores the temporal redundancy present in video sequences to reduce the amount of data necessary to represent the information. This work presents a hardware architecture of a motion estimation module for high resolution videos according to H.264/AVC standard. The H.264/AVC is the most advanced video coder standard, with several new features which allow it to achieve high compression rates. The architecture presented in this work was developed to provide a high data reuse. The data reuse schema adopted reduces the bandwidth required to execute motion estimation. The motion estimation is the task responsible for the largest share of the gains obtained with the H.264/AVC standard so this module is essential for final video coder performance. This work is included in Rede H.264 project which aims to develop Brazilian technology for Brazilian System of Digital Television

Apoiando a construção de testes de aceitação automatizados a partir da especificação de requisitos

Automation has become increasingly necessary during the software test process due to the high cost and time associated with such activity. Some tools have been proposed to automate the execution of Acceptance Tests in Web applications. However, many of them have important limitations such as the strong dependence on the structure of the HTML pages and the need of manual valuing of the test cases. In this work, we present a language for specifying acceptance test scenarios for Web applications called IFL4TCG and a tool that allows the generation of test cases from these scenarios. The proposed language supports the criterion of Equivalence Classes Partition and the tool allows the generation of test cases that meet different combination strategies (i.e., Each-Choice, Base-Choice and All Combinations). In order to evaluate the effectiveness of the proposed solution, we used the language and the associated tool for designing and executing Acceptance Tests on a module of Sistema Unificado de Administração Pública (SUAP) of Instituto Federal Rio Grande do Norte (IFRN). Four Systems Analysts and one Computer Technician, which work as developers of the that system, participated in the evaluation. Preliminary results showed that IFL4TCG can actually help to detect defects in Web applications