Formations of robotic swarm: an artificial force based approach

Cooperative control of multiple mobile robots is an attractive and challenging problem which has drawn considerable attention in the recent past. This paper introduces a scalable decentralized control algorithm to navigate a group of mobile robots (swarm) into a predefined shape in 2D space. The proposed architecture uses artificial forces to control mobile agents into the shape and spread them inside the shape while avoiding intermember collisions. The theoretical analysis of the swarm behavior describes the motion of the complete swarm and individual members in relevant situations. We use computer simulated case studies to verify the theoretical assertions and to demonstrate the robustness of the swarm under external disturbances such as death of agents, change of shape etc. Also the performance of the proposed distributed swarm control architecture was investigated in the presence of realistic implementation issues such as localization errors, communication range limitations, boundedness of forces etc.

Towards optimization of a real-world robotic-sensor system of systems

The problem of threat detection in an unstructured environment is considered. Three systems, comprising of robots and sensors, are proposed to form a system of systems (SoS) to find a solution to the problem. System interactions are defined to provide a framework for formulation as an SoS optimization problem. Different cost and objective functions are introduced for optimization of local criteria. Using different weights, a linear combination of the local cost and objective functions is obtained to propose a global objective function. An algorithm is suggested to find an optimum value for the global objective function leading towards optimization of the SoS.

Formation of networked mobile robots

This thesis presents a novel approach for controlling a robotic swarm to generate a geometric pattern described by a given contour, and a suitable communication scheme which enables the robots to communicate with each other as an all-to-all network.

Autonomous robotic fish for a swarm environment

Developments and advances in ground and aerial robotics have presented many end user, 'off the shelf' products for use in areas such as search and rescue, recreation, filming, defense forces and sporting. Advances in underwater robotics however have not yet become as established and widespread as their ground and aerial counterparts, though this field is emerging very quickly. Many underwater robotic vessels are built from expensive, complex components and circuitry which are often tethered to a power source and controlled remotely. This greatly limits their effectiveness and potential range. The Goal was to construct two or more simple robotic fish made from 'off the shelf' products, making use of modern technologies such as 3D printing to assist in the design and manufacture process. And further that each fish is capable of swarming with other fish and interacting with objects in water. Two points of note is the calibration of IR sensors for use underwater and the magnetic coupling of the tail foil to the fish body.

Design of a low cost underwater robotic research platform

To perform under water robotic research requires specialized equipment. A few pieces of electronics atop a set of wheels is not going to cut it. An underwater research platform must be waterproof, reliable, robust, recoverable and easy to maintain. It must also be able to move in 3 dimensions. Finally it must be able to navigate and avoid obstacles. To purchase such a platform can be very expensive. However, for shallow water, a suitable platform can be built from mostly off the shelf items at little cost. This paper describes the design of one such underwater robot including various sensors and communications systems that allow for swarm robotics.

Applications and prototype for systems of systems swarm robotics

In order to develop a robotic system of systems the robotic platforms must be designed and built. For this to happen, the type of application involved should be clear. Swarm robots need to be self contained and powered. They must also be self governing. Here the authors examine various applications and a prototype robot that may be useful in these scenarios.

Design of a prototype underwater research platform for swarm robotics

To perform under water robotic research requires specialized equipment. A few pieces of electronics atop a set of wheels are not going to cut it. An underwater research platform must be waterproof, reliable, robust, recoverable and easy to maintain. It must also be able to move in 3 dimensions. Also it must be able to navigate and avoid obstacles. Further if this platform is to be part of a swarm of like platforms then it must be cost effective and relatively small. To purchase such a platform can be very expensive. However, for shallow water, a suitable platform can be built from mostly off the shelf items at little cost. This article describes the design of one such underwater robot including various sensors and communications systems that allow for swarm robotics. Whilst the robotic platform performs well, to explore what many of them would do, that is more than are available, simulation is required. This article continues to study how best to simulate these robots for a swarm, or system of systems, approach.

Underwater swarm robotics review

Underwater robotics is a growing field in which more research is required. A literature review has been conducted on underwater robotics, focusing on the swarm problem with this type of robotics to help overcome this gap. Consensus control of robotic swarms is focused on, with a brief description of formation control and how it can be applied in the underwater setting. The basic concepts behind Particle Swarm Optimization, Ant Colony Optimization, Bees Algorithm and Heterogeneous Swarms has also been presented. The problems that are associated with communicating underwater are shown, with some possible solutions to this problem also being presented. Possible future work is described to conclude the paper.

Multi-agent model for robotic assembly system

In this paper, a multi-agent based model for a robotic assembly system is presented. Firstly, an organization model is used to construct the multi-agent model. Secondly, a dynamic self-organizing method is then put forward for the multi-agent robotic system to bid and contract the operations. Thirdly, a real multi-agent robotic system is built and assembly experiments are carried out. Finally, the experimental results confirm that the present multi-agent robotic system has flexibility, adaptation and stability.

An active stereo vision-based learning approach for robotic tracking, fixating and grasping control

In this paper, an active stereo vision-based learning approach is proposed for a robot to track, fixate and grasp an object in unknown environments. First, the functional mapping relationships between the joint angles of the active stereo vision system and the spatial representations of the object are derived and expressed in a three-dimensional workspace frame. Next, the self-adaptive resonance theory-based neural networks and the feedforward neural networks are used to learn the mapping relationships in a self-organized way. Then, the approach is verified by simulation using the models of an active stereo vision system which is installed in the end-effector of a robot. Finally, the simulation results confirm the effectiveness of the present approach.

Kinematic and dynamic modeling of a robotic head with linear motors

Our present research focuses on kinematic and dynamic modeling of a 3-DOF robotic cutting head for the next generation of CNC machines. The robotic cutting head is one kind of parallel manipulator of 3-PUU type, which has a high flexibility of motion in three-dimensional space. The parallel manipulator consists of three linear servomotors, which drive three connecting rods independently according to the cutting strategy. Being a parallel manipulator, the robotic cutting head has higher stiffness and position accuracy; consequently, higher velocities and accelerations can be achieved. A very suitable application of this mechanism is as a cutting head of a precision machine tool for three-dimensional cutting problems.

Solution to robotic landmine detection through use of path planning and motor control

Low cost robotic detectors are a promising new approach to combat the disturbing landmine crisis. In this paper a low-cost robotic solution is proposed, we present several control techniques used to improve the precision of the robotic motion. A P and PD controller is applied, and it is concluded that a cascaded control system provides a more stable and accurate response. Two search patterns for landmine detection are considered, rectangular and spiral, these are used to analyse the effectiveness of the control system.

Robust parallel filtering design of a swarm tracking system

Swarming networks of mobile autonomous agents require inter-agent position information in order perform various tasks. The primary control input for the majority of current control strategies is inter-agent distance information. In this paper we provide a robust parallel filter based tracking scheme that allows a mobile agent to track other multiple mobile agents. The distance, angle, and relative position is given in a direct target tracking output. This allows the mobile agent to decide which information is best suited for the particular objective

Haptic control of multi-axis robotic systems

Control of tele-operated remote robot’s is nothing new; the public was introduced to this 'new' field in 1986 when the Chernobyl cleanup began. Pictures of weird and wonderful robotic workers pouring concrete or moving rubble flooded the world. Integration of force feedback or 'haptics' to remote robot's is a new development and one that is likely to make a big difference in man-machine interaction. Development of haptic capable tele-operation schema is a challenge. Often platform specific software is developed for one off tasks. This research focussed on the development of an open software platform for haptic control of multiple remote robotic platforms. The software utilises efficient server/client architecture for low data latency, while efficiently performing required kinematic transforms and data manipulation in real time. A description of the algorithm, software interface and hardware is presented in this paper. Preliminary results are encouraging as haptic control has been shown to greatly enhances remote positioning tasks.