Effect of oxidant type on the chemiluminescence intensity from the reaction of tris(2,2’-biyridyl)ruthenium(III) with various organic acids

An investigation into the chemiluminescence of fourteen organic acids and tris(2,2′-bipyridyl)ruthenium(II) was undertaken. Particular emphasis was placed upon the method of production of the reagent, tris(2,2′-bipyridyl)ruthenium(III), with cerium(IV) sulfate, potassium permanganate, lead dioxide and electrochemical generation. Analytically useful chemiluminescence was observed when Ce(IV) or potassium permanganate were employed as oxidants. The kinetics of analyte oxidation was related to the intensity of the chemiluminescence emission, which increased by three orders of magnitude for tartaric acid after 40 h of oxidation.

Synthesis and preliminary analytical evaluation of the chemiluminescence from (4-[4-(dichloromethylsilanyl)-butyl]-4`-methyl-2,2`-bipyridyl)bis(2,2`-bipyridyl)ruthenium(II) covalently bonded to silica particles

This paper describes, for the first time, a simple and effective synthetic route for covalently bonding the chemiluminescence reagent, (4-[4-(dichloromethylsilanyl)-butyl]-4’-methyl-2,2’-bipyridyl)bis(2,2’-bipyridyl)ruthenium(II) onto silica particles. The subsequent preparation of chemically regeneratable detection cells and their preliminary analytical evaluation with both sequential injection analysis and flow injection analysis are also reported. Unoptimised analytical figures of merit were established for standard solutions of codeine and sodium oxalate with detection limits calculated from three times the standard deviation of the blank signal, of 1 × 10^–8 M and 3 × 10^–7 M respectively. The chemically immobilised reagent exhibited some intriguing solvent and kinetic effects, which are also briefly discussed.

Determination of sodium oxalate in Bayer liquor using flow-analysis incorporating an anion exchange column and tris(2,2`-bipyridyl)ruthenium(II) chemiluminescence detection

Semi-automated flow injection instrumentation, incorporating a small anion exchange column coupled with tris(2,2′-bipyridyl)ruthenium(II) (Ru(bipy)₃²⁺) chemiluminescence detection, was configured and utilised to develop rapid methodology for the determination of sodium oxalate in Bayer liquors. The elimination of both negative and positive interferences from aluminium(III) and, as yet, unknown concomitant organic species, respectively are discussed. The robustness of the methodology was considerably enhanced by using the temporally stable form of the chemiluminescence reagent, tris(2,2′-bipyridyl)ruthenium(III) perchlorate in dry acetonitrile. Real Bayer process samples were analysed and the results obtained compared well with those performed using standard methods within industrial laboratories.

Photocatalytic degradation of dye effluent by titanium dioxide pillar pellets in aqueous solution

Photocatalytic oxidation (PCO) process is an effective way to deal with organic pollutants in wastewater which could be difficult to be degraded by conventional biological treatment methods. Normally the TiO2 powder in nanometre size range was directly used as photocatalyst for dye degradation in wastewater. However the titanium dioxide powder was arduous to be recovered from the solution after treatment. In this application, a new form of TiO2 (i.e. pillar pellets ranging from 2.5 to 5.3 mm long and with a diameter of 3.7 mm) was used and investigated for photocatalytic degradation of textile dye effluent. A test system was built with a flat plate reactor (FPR) and UV light source (blacklight and solar simulator as light source respectively) for investigating the effectiveness of the new form of TiO2. It was found that the photocatalytic process under this configuration could efficiently remove colours from textile dyeing effluent. Comparing with the TiO2 powder, the pellet was very easy to recovered from the treated solution and can be reused in multiple times without the significant change on the photocatalytic property. The results also showed that to achieve the same photocatalytic performance, the FPR area by pellets was about 91% smaller than required by TiO2 powder. At least TiO2 pellet could be used as an alternative form of photocatalyst in applications for textile effluent treatment process, also other wastewater treatment processes.

Determination of glyphosate mono-isopropylamine salt in process samples using flow injection analysis with tris(2,2`-bipyridyl)ruthenium(II) chemiluminescence detection

The mono-isopropylamine salt of glyphosate was selectively determined directly in industrial and commercial formulations using flow injection analysis with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection without the need for separation. Glyphosate and its mono-isopropylamine salt furnished detection limits of 7×10⁻⁹ and 3.5×10⁻¹⁰ M and relative standard deviations of 0.4% at 1×10⁻⁷ M and 0.8% at 5×10⁻⁸ M, respectively. The methodology is robust and reliable with samples subjected only to aqueous dilution prior to analysis.

Determination of proline in wine using flow injection analysis with tris(2,2`-bipyridyl)ruthenium(II) chemiluminescence detection

Flow injection methodology is described for the determination of proline in red and white wines using tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection. Selective conditions were achieved for proline at pH 10, while other amino acids and wine components did not interfere. The precision of the method was less than 1.00% (R.S.D.) for five replicates of a standard (4 × 10⁻⁶ M) and the detection limit was 1 × 10⁻⁸ M. The level of proline in white and sparkling wines using the developed methodology was equivalent to those achieved using HPLC-FMOC amino acid analysis. SPE removal of phenolic material was required for red wines to minimize Ru(bipy)₃³⁺ consumption and its associated effect on accuracy.

Preliminary evaluation of dual acidic potassium permanganate and tris(2,2`-bipyridyl)ruthenium(II) chemiluminescence detection for the HPLC determination of Papaver somniferum alkaloids

This paper describes a dual chemiluminescence reagent for the determination of the opiate alkaloids morphine, codeine, oripavine, and thebaine in Papaver somniferum extracts. Detection was achieved using a mixture of acidic potassium permanganate and tris(2,2′-bipyridyl)ruthenium(ii), where the former acted as both the oxidant for the latter and as a chemiluminescence reagent in its own right. The analytes were separated on a C₈ column using ion-pairing HPLC. The application of the mixed reagent detection compared favourably with results obtained using standard HPLC methodology. Detection limits for the alkaloids were 10^-6, 5 × 10^-7, 3 × 10^-6, and 2 × 10^-6 mol L^-1 for morphine, codeine, oripavine, and thebaine, respectively.

Photocatalytic reduction of carbon dioxide

Carbon dioxide reforming happens all the time in nature by photosynthesis of plants. It thus provides a great challenge to equal or surpass this photosynthesis in an artificial system. This paper presents a literature review of using semi-conductor to assist photocatalytic reduction of carbon dioxide under UV irradiation. It analyses some key factors influencing the reaction rates which have been studied worldwide in respective areas. Special interest is taken in recommending possible improvements for the heterogeneous photocatalysis involving gas-solid interfaces, particularly in relation to the influencing factors affecting product concentrations and the reduction rate.

Detection of pyrrolizidine alkaloids using flow analysis with both acidic potassium permanganate and tris(2,2’-bipyridyl)ruthenium(II) chemiluminescence

For the first time, analytically useful chemiluminescence was elicited from the reactions of the pyrrolizidine alkaloids. Heliotrine, retronecine, supinine, monocrotaline and echinatine N-oxide yielded chemiluminescence upon reaction with tris(2,2′-bipyridyl)ruthenium(II) whilst lasiocarpine, its N-oxide and supinine elicited light upon reaction with acidic potassium permanganate. Detection limits for heliotrine were 1.25 × 10⁻⁷ M and 9 × 10⁻⁹ M for tris(2,2′-bipyridyl)ruthenium(III) perchlorate with flow injection analysis (FIA) and the silica-immobilised reagent (4-[4-(dichloromethylsilanyl)-butyl]-4′-methyl-2,2′-bipyridine)bis(2,2′-bipyridyl)ruthenium(II) with sequential injection analysis (SIA), respectively. Lasiocarpine was detectable at 1.4 × 10⁻⁷ M using acidic potassium permanganate with FIA. Additionally, the silica-immobilised reagent was optimised with respect to the oxidant (ammonium ceric nitrate) concentration and the aspiration times which afforded a detection limit for codeine of 5 × 10⁻¹⁰ M using SIA.

Determination of psilocin and psilocybin using flow injection analysis with acidic potassium permanganate and tris(2,2’-bipyridyl) ruthenium(II) chemiluminescence detection respectively

A simple, rapid and sensitive method for the determination of psilocin and psilocybin is described. This is the first report on the determination of psilocin and psilocybin using flow injection analysis with acidic potassium permanganate and tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence. The limits of detection (signal-to-noise ratio = 3) are 9 × 10⁻¹⁰ M and 3 × 10⁻¹⁰ M for psilocin and psilocybin, respectively.A concise synthetic route for psilocin in three steps from readily available starting materials is also described. The structures were elucidated on the basis of spectroscopic data.

Photocatalytic production of methane and hydrogen through reduction of carbon dioxide with water using titania pellets

This paper presents an experimental study on employing a pellet form of catalyst in photo-reduction of carbon dioxide with water. Water was first absorbed into titania pellets. Highly purified carbon dioxide gas was then discharged into a reactor containing the wet pellets, which were then illuminated continuously for 65 hours using UVC lamps. Analysing the products accumulated in the reactor confirmed that methane and hydrogen were produced through photo-reduction of carbon dioxide with water. No other hydrocarbons were detected. Increasing the temperature in the reactor has showed little change on the amount of methane produced.

Photocatalytic reduction of carbon dioxide into gaseous hydrocarbon using TiO2 pellets

It has been shown that CO₂ could be transformed into hydrocarbons when it is in contact with water vapour and catalysts under UV irradiation. This paper presents an experimental set-up to study the process employing a new approach of heterogeneous photocatalysis using pellet form of catalyst instead of immobilized catalysts on solid substrates. In the experiment, CO₂ mixed with water vapour in saturation state was discharged into a quartz reactor containing porous TiO₂ pellets and illuminated by various UV lamps of different wavelengths for 48 h continuously. The gaseous products extracted were identified using gas chromatography. The results confirmed that CO₂ could be reformed in the presence of water vapour and TiO₂ pellets into CH₄ under continuous UV irradiation at room conditions. It showed that when UVC (253.7 nm) light was used, total yield of methane was approximately 200 ppm which was a fairly good reduction yield as compared to those obtained from the processes using immobilized catalysts through thin-film technique and anchoring method. CO and H₂ were also detected. Switching from UVC to UVA (365 nm) resulted in significant decrease in the product yields. The pellet form of catalyst has been found to be attractive for use in further research on photocatalytic reduction of CO₂.

Tris(2,2´-bipyridyl)ruthenium(II) chemiluminescence

This paper critically reviews analytical applications of the chemiluminescence from tris(2,2-bipyridyl)ruthenium(II) and related compounds published in the open literature between mid-1998 and October 2005. Following the introduction, which summarises the reaction chemistry and reagent generation, the review divides into three major sections that focus on: (i) the techniques that utilise this type of detection chemistry, (ii) the range of analytes that can be determined, and (iii) analogues and derivatives of tris(2,2-bipyridyl)ruthenium(II).

The determination of psilocin and psilocybin in hallucinogenic mushrooms by HPLC utilizing a dual reagent acidic potassium permanganate and tris(2,2´-bipyridyl)ruthenium(II) chemiluminescence detection system

This paper describes a procedure for the determination of psilocin and psilocybin in mushroom extracts using high-performance liquid chromatography with postcolumn chemiluminescence detection. A number of extraction methods for psilocin and psilocybin in hallucinogenic mushrooms were investigated, with a simple methanolic extraction being found to be most effective. Psilocin and psilocybin were extracted from a variety of hallucinogenic mushrooms using methanol. The analytes were separated on a C₁₂ column using a (95:5% v/v) methanol:10 mM ammonium formate, pH 3.5 mobile phase with a run time of 5 min. Detection was realized through a dual reagent chemiluminescence detection system of acidic potassium permanganate and tris(2,2'-bipyridyl)ruthenium(II). The chemiluminescence detection system gave improved detectability when compared with UV absorption at 269 nm, with detection limits of 1.2 × 10⁻⁸ and 3.5 × 10⁻⁹ mol/L being obtained for psilocin and psilocybin, respectively. The procedure was applied to the determination of psilocin and psilocybin in three Australian species of hallucinogenic mushroom.