Robotic object grasping in context of human grasping and manipulation

This paper presents experimental and deductive findings that shed new light on grasp force estimation, which improves robot’s chances to grasp and manipulate the object close to optimum conditions on the first attempt, which in turn improves robot’s object manipulation dexterity.
This paper proposes that object slippage detection in the human hand is not detected based purely on microvibrations sensed by the human skin during incipient slippage but also on load sensing at each finger and movement of fingers relative to each other while holding an object.

Object grasping and safe manipulation using friction-based sensing.

This project provides a solution for slippage prevention in industrial robotic grippers for the purpose of safe object manipulation. Slippage sensing is performed using novel friction-based sensors, with customisable slippage sensitivity and complemented by an effective slippage prediction strategy. The outcome is a reliable and affordable slippage prevention technology.

Heavy tools manipulation by low powered direct-drive five-bar parallel robot

This paper presents a simple and available system for manipulation of heavy tools by low powered manipulator for industrial applications. In the heavy manufacturing industries, sometimes, heavy tools are employed for different types of work. But the application of robots with heavy tools is not possible due to the limited torque limits of actuators. Suspended tool systems (STS) have been proposed to manipulate heavy tools by low powered robot-arm for this purpose. A low powered five-bar direct-drive parallel manipulator is designed and constructed to manipulate heavy tools suspended from a spring balancer. The validity, usefulness, and effectiveness of the suspended tool system are shown by experimental results.

A haptic platform to enable fingertip grasping and manipulation

Haptic technologies allow human users to haptically interact with virtual environments. Haptics has been employed in many application domains including operator training, virtual exploration and teleoperation. Currently, most commercially available haptic devices focus on a single point of haptic interaction. While single-point haptics have been successfully employed in many applications, they remain limited to particular types of haptic interaction. Multi-point haptic devices are a logical progression and facilitate a far wider range of interactions including object grasping, multi-finger object manipulation and size discrimination. The ability to effectively achieve such interactions offers significant benefits for many applications including virtual training, telesurgery and telemanipulation. In such applications, the ability to use multi-point haptic interactions can provide far more effective user interaction as well improved perception of the virtual environment.

Robotic grasping and manipulation controller framework: architecture redevelopment

This paper details the further improvements obtained by redesigning a previously offered Manipulation Controller Framework to provide support to an innovative, friction-based object slippage detection strategy employed by the robotic object manipulator. This upgraded Manipulation Controller Framework includes improved slippage detection functionality and a streamlined architecture designed to improve controller robustness, reliability and speed. Improvements include enhancements to object slippage detection strategy, the removal of the decision making module and integration of its functionality into the Motion Planner, and the stream-lining of the Motion Planner to improve its effectiveness. It is anticipated that this work will be useful to researchers developing integrated robot controller architectures and slippage control.

Evaluating the feasibility, effectiveness and acceptability of an active play intervention for disadvantaged preschool children : a pilot study

Australian children from disadvantaged families are at increased risk of delays in acquiring fundamental movement skills, with physical inactivity and increased risk of the potential consequences of obesity. The aims of this pilot study were to: 1) assess the fundamental movement skills of disadvantaged children; 2) evaluate the feasibility and effectiveness of adapting an existing parenting and child development program to incorporate additional weekly play activities (the intervention); and 3) examine the acceptability of the intervention. Children aged 1.5-5 years were assessed pre-intervention (n = 26) and postintervention (n = 16) over a period of 22 weeks using the gross motor component of the Peabody Developmental Motor Scales - 2nd Edition (PDMS-2) (Folio & Fewell, 2000). Parents completed a demographic and environmental survey and those implementing the intervention were interviewed to assess the feasibility and acceptability of the intervention. Pre-intervention the children from disadvantaged families had locomotion, object manipulation and Gross Motor Quotient (GMQ) scores significantly below the norm-referenced standards of the PDMS-2 (p < 0.05). The intervention was associated with improvements in the locomotion (8.35 to 9.5; p = 0.009), and object manipulation (8.6 to 9.6; p = 0.04) subtest scores and the GMQ scores (92.6 to 99.3; p < 0.01). The intervention was deemed feasible and acceptable by those implementing the program. Low levels of physical activity in disadvantaged communities may be related to delayed acquisition of fundamental movement skills in childhood. This pilot study raises the possibility of correcting this deficit in early childhood, and improving the potential for all children to lead an active life.

Enabling multi-point haptic grasping in virtual environments

Haptic interaction has received increasing research interest in recent years. Currently, most commercially available haptic devices provide the user with a single point of interaction. Multi-point haptic devices present a logical progression in device design and enable the operator to experience a far wider range of haptic interactions, particularly the ability to grasp via multiple fingers. This is highly desirable for various haptically enabled applications including virtual training, telesurgery and telemanipulation. This paper presents a gripper attachment which utilises two low-cost commercially available haptic devices to facilitate multi-point haptic grasping. It provides the ability to render forces to the user's fingers independently and using Phantom Omni haptic devices offers several benefits over more complex approaches such as low-cost, reliability, and ease of programming. The workspace of the gripper attachment is considered and in order to haptically render the desired forces to the user's fingers, kinematic analysis is discussed and necessary formulations presented. The integrated multi-point haptic platform is presented and exploration of a virtual environment using CHAI 3D is demonstrated.

Grasping virtual objects with multi-point haptics

The majority of commercially available haptic devices offer a single point of haptic interaction. These devices are limited when it is desirable to grasp with multiple fingers in applications including virtual training, telesurgery and telemanipulation. Multipoint haptic devices serve to facilitate a greater range of interactions. This paper presents a gripper attachment to enable multi-point haptic grasping in virtual environments. The approach employs two Phantom Omni haptic devices to independently render forces to the user's thumb and other fingers. Compared with more complex approaches to multi-point haptics, this approach provides a number of advantages including low-cost, reliability and ease of programming. The ability of the integrated multi-point haptic platform to interact within a CHAI 3D virtual environment is also presented.

A multi-point haptic platform for grasping and manipulating virtual objects

This work presents a multi-point haptic platform that employs two Phantom Omni haptic devices. A gripper attachment connects to both devices and enables multi-point haptic grasping in virtual environments. In contrast to more complex approaches, this setup benefits from low-cost, reliability, and ease of programming while being capable of independently rendering forces to each of the user’s fingertips. The ability to grasp with multiple points potentially lends itself to applications such as virtual training, telesurgery and telemanipulation.

Optimal sensing requirement for slippage prevention in robotic grasping

This paper presents a new theoretical development and modelling related to the requirement of the minimum number of sensors necessary for slippage prevention in robotic grasping. A fundamental experimental investigation has been conducted to support the newly developed postulate. A series of basic experiments proved that it is possible to evaluate the contributions of various sensors to slippage prevention and control in robotic grasping. The use of three discrete physical sensors, one for each of the three sensing functions (normal, tangential and slippage), has been proven to be the most reliable combination for slippage prevention in robotic grasping. It was also proven that the best performance from a two-sensor combination can be achieved when normal grasp force and tangential force are both monitored in the grasping process.