The Determinants of Financial Leverage of Large Publicly Listed Companies - Evidence from Nordic Telecom Sector

This thesis examines the determinants of financial leverage ratio of large publicly listed companies within Nordic Telecom sector. The study is done as a case study and it covers 5 case companies headquartered in Nordic countries during period of 2002 - 2014 and by using restated values of quarterly observations from each case company’s interim reports. The chosen hypotheses are tested with multiple linear regressions firm by firm. The Findings of the study showed that uniqueness of Telecom sector and the region of our sample could not provide us unequivocal determinants of leverage ratio within the sector. However, e.g. Pecking order theory’s statement of Liquidity was widely confirmed by 3 out of 5 case companies which is worth to be taken into account in the big picture. The findings also showed that theories and earlier empirical evidence are confirmed by our case companies individually and non-systematically. Though Telecom sector is considered as quite unique industry and we did not discover absolute common relationships that would have held through all the Nordic case companies, we got unique and valuable evidence to conduct the research of this sector in future.

A comparative performance study of four-pole induction motors and synchronous reluctance motors in variable speed drives

Design aspects of the Transversally Laminated Anisotropic (TLA) Synchronous Reluctance Motor (SynRM) are studied and the machine performance analysis compared to the Induction Motor (IM) is done. The SynRM rotor structure is designed and manufactured for a30 kW, four-pole, three-phase squirrel cage induction motor stator. Both the IMand SynRM were supplied by a sensorless Direct Torque Controlled (DTC) variablespeed drive. Attention is also paid to the estimation of the power range where the SynRM may compete successfully with a same size induction motor. A technicalloss reduction comparison between the IM and SynRM in variable speed drives is done. The Finite Element Method (FEM) is used to analyse the number, location and width of flux barriers used in a multiple segment rotor. It is sought for a high saliency ratio and a high torque of the motor. It is given a comparison between different FEM calculations to analyse SynRM performance. The possibility to take into account the effect of iron losses with FEM is studied. Comparison between the calculated and measured values shows that the design methods are reliable. A new application of the IEEE 112 measurement method is developed and used especially for determination of stray load losses in laboratory measurements. The study shows that, with some special measures, the efficiency of the TLA SynRM is equivalent to that of a high efficiency IM. The power factor of the SynRM at rated load is smaller than that of the IM. However, at lower partial load this difference decreases and this, probably, brings that the SynRM gets a better power factor in comparison with the IM. The big rotor inductance ratio of the SynRM allows a good estimating of the rotor position. This appears to be very advantageous for the designing of the rotor position sensor-less motor drive. In using the FEM designed multi-layer transversally laminated rotor with damper windings it is possible to design a directly network driven motor without degrading the motorefficiency or power factor compared to the performance of the IM.

eBusiness Adoption in Metalforming SMEs in the Automotive Industry

Competition in the automotive industry has led the participants trying to find new ways of reducing costs, increasing efficiency and improve responsiveness to gain competitive advantage. It is not anymore single companies competing against each others, it is the whole supply chains competing. This has already earlier led the big multinational companies to gain benefits by using electronic means of doing business (eBusiness). Lower down the chain the smaller companies have not yet taken advantage of the potential benefits of eBusiness methods. Therefore, the full benefits from eBusiness methods have yet to be discovered. The aim of the Thesis is to find ways of taking advantage of eBusiness methods with their limited resources. Because small and medium sized enterprises (SME) many times lack of eBusiness knowledge this project also aims to clarify the idea of eBusiness, present the potential possibilities and benefits from eBusiness and the requirements needed to achieve them. The Thesis presents information of eBusines especially in the automotive industry. Together with this information and the information acquired from the case study company a simple route map is developed which SMEs can use gain competitive advantage by eBusiness methods.

Professional development among educators pursuing a B.Ed. program in special education in Tanzania : a study of motives and perceived outcomes

Implementation of different policies and plans aiming at providing education for all is a challenge in Tanzania. The need for educators and professionals with relevant knowledge and qualifications in special education is substantial. Teacher education does not equip educators with sufficient knowledge and skills in special education and professional development programs in special education are few in number. Up to 2005 no degree programs in special education at university level were available in Tanzania. The B.Ed. Special Education program offered by the Open University of Tanzania in collaboration with Åbo Akademi University in Finland was one of the efforts aimed at addressing the big national need for teachers and other professionals with degree qualifications in special education. This pilot program offered unique possibilities to study professional development in Tanzania. The research group in this study consisted of the group of students who participated in the degree program 2005-2007. The study is guided by three theoretical perspectives: individual, social and societal. The individual perspective emphasizes psychological factors as motives, motivation, achievement, self-directed behavior and personal growth. Within social perspective, professional development is viewed as situated within the social and cultural context. The third perspective, the societal, focuses on change, reforms, innovations and transformation of school systems and societies. Accordingly, professional development is viewed as an individual, social and societal phenomenon. The overall aim of the study is to explore the participants’ motives for participating in a B.Ed. Special Education program and the perceived outcomes of the program in terms of professional development. In order to achieve the objectives of the study, a case study approach was adopted. Questionnaires and semi-structured interviews were administered in three waves between January 2007 and February 2009 to the 35 educators participating in the B.Ed. Special Education program. The findings of the study reveal that the participants expressed motives which were related to job performance, knowledge, skills, academic degree and career. Also altruistic motives were expressed by the participants in terms of helping and supporting students with special needs and their communities. The perceived outcomes of the program were in line with the expressed motives. However, the results indicate that the participants also learned new skills, as interaction skills and guidance and counseling skills. Increased self-confidence was also mentioned as an outcome. The participants also got deepened understanding of disability issues. In addition, they learned strategies for creating awareness of persons with disability in the communities. Thus the findings of the study indicate positive outcomes of the program in terms of professional development. The conclusion of the study is that individual, social and societal factors interact when it comes to explaining why Tanzanian educators in special education choose to pursue a degree program in special education. The individual motives, as increased knowledge and better prospects of career development interact with the social and societal motives to help and support vulnerable student groups. The study contributes to increased understanding of the complexity of professional development and of the realities educators meet when educational reforms are implemented in a developing country.

The energy efficiency of chilled beam systems in an office building at different climates

Besides the sustaining of healthy and comfortable indoor climate, the air conditioning system should also achieve for energy efficiency. The target indoor climate can be ob-tained with different systems; this study focuses on comparing the energy efficiency of different air conditioning room unit systems in different climates. The calculations are made with dynamic energy simulation software IDA ICE by comparing the indoor cli-mate and energy consumption of an office building with different systems in different climates. The aim of the study is to compare the energy efficiency of chilled beam systems to other common systems: variable air volume, fan coil and radiant ceiling systems. Besides the annual energy consumption also the sustainability of target indoor climate is compared between the simulations. Another aim is to provide conclusions to be used in the product development of the chilled beam systems’ energy efficiency. The adaptable chilled beam system and the radiant ceiling system prove to be energy efficient independent of the climate. The challenge of reliable comparison is that other systems are not able to reach the target indoor climate as well as the others. The complex calculation environment of the simulation software, made assumptions and excluding of the financial aspects complicate comparing the big picture. The results show that the development of the chilled beam systems should concentrate on energy efficient night heating, flexible demand based ventilation and capacity control and possibilities on integrating the best practices with other systems. 

Fedora Commons as core repository of the EU legislation

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

The supermassive binary black hole system OJ287

Abstract This doctoral thesis concerns the active galactic nucleus (AGN) most often referred to with the catalogue number OJ287. The publications in the thesis present new discoveries of the system in the context of a supermassive binary black hole model. In addition, the introduction discusses general characteristics of the OJ287 system and the physical fundamentals behind these characteristics. The place of OJ287 in the hierarchy of known types of AGN is also discussed. The introduction presents a large selection of fundamental physics required to have a basic understanding of active galactic nuclei, binary black holes, relativistic jets and accretion disks. Particularly the general relativistic nature of the orbits of close binaries of supermassive black holes is explored with some detail. Analytic estimates of some of the general relativistic effects in such a binary are presented, as well as numerical methods to calculate the effects more precisely. It is also shown how these results can be applied to the OJ287 system. The binary orbit model forms the basis for models of the recurring optical outbursts in the OJ287 system. In the introduction, two physical outburst models are presented in some detail and compared. The radiation hydrodynamics of the outbursts are discussed and optical light curve predictions are derived. The precursor outbursts studied in Paper III are also presented, and tied into the model of OJ287. To complete the discussion of the observable features of OJ287, the nature of the relativistic jets in the system, and in active galactic nuclei in general, is discussed. Basic physics of relativistic jets are presented, with additional detail added in the form of helical jet models. The results of Papers II, IV and V concerning the jet of OJ287 are presented, and their relation to other facets of the binary black hole model is discussed. As a whole, the introduction serves as a guide, though terse, for the physics and numerical methods required to successfully understand and simulate a close binary of supermassive black holes. For this purpose, the introduction necessarily combines a large number of both fundamental and specific results from broad disciplines like general relativity and radiation hydrodynamics. With the material included in the introduction, the publications of the thesis, which present new results with a much narrower focus, can be readily understood. Of the publications, Paper I presents newly discovered optical data points for OJ287, detected on archival astronomical plates from the Harvard College Observatory. These data points show the 1900 outburst of OJ287 for the first time. In addition, new data points covering the 1913 outburst allowed the determination of the start of the outburst with more precision than was possible before. These outbursts were then successfully numerically modelled with an N-body simulation of the OJ287 binary and accretion disc. In Paper II, mechanisms for the spin-up of the secondary black hole in OJ287 via interaction with the primary accretion disc and the magnetic fields in the system are discussed. Timescales for spin-up and alignment via both processes are estimated. It is found that the secondary black hole likely has a high spin. Paper III reports a new outburst of OJ287 in March 2013. The outburst was found to be rather similar to the ones reported in 1993 and 2004. All these outbursts happened just before the main outburst season, and are called precursor outbursts. In this paper, a mechanism was proposed for the precursor outbursts, where the secondary black hole collides with a gas cloud in the primary accretion disc corona. From this, estimates of brightness and timescales for the precursor were derived, as well as a prediction of the timing of the next precursor outburst. In Paper IV, observations from the 2004–2006 OJ287 observing program are used to investigate the existence of short periodicities in OJ287. The existence of a _50 day quasiperiodic component is confirmed. In addition, statistically significant 250 day and 3.5 day periods are found. Primary black hole accretion of a spiral density wave in the accretion disc is proposed as the source of the 50 day period, with numerical simulations supporting these results. Lorentz contracted jet re-emission is then proposed as the reason for the 3.5 day timescale. Paper V fits optical observations and mm and cm radio observations of OJ287 with a helical jet model. The jet is found to have a spine–sheath structure, with the sheath having a much lower Lorentz gamma factor than the spine. The sheath opening angle and Lorentz factor, as well as the helical wavelength of the jet are reported for the first time. Tiivistelmä Tässä väitöskirjatutkimuksessa on keskitytty tutkimaan aktiivista galaksiydintä OJ287. Väitöskirjan osana olevat tieteelliset julkaisut esittelevät OJ287-systeemistä saatuja uusia tuloksia kaksoismusta-aukkomallin kontekstissa. Väitöskirjan johdannossa käsitellään OJ287:n yleisiä ominaisuuksia ja niitä fysikaalisia perusilmiöitä, jotka näiden ominaisuuksien taustalla vaikuttavat. Johdanto selvittää myös OJ287-järjestelmän sijoittumisen aktiivisten galaksiytimien hierarkiassa. Johdannossa käydään läpi joitakin perusfysiikan tuloksia, jotka ovat tarpeen aktiivisten galaksiydinten, mustien aukkojen binäärien, relativististen suihkujen ja kertymäkiekkojen ymmärtämiseksi. Kahden toisiaan kiertävän mustan aukon keskinäisen radan suhteellisuusteoreettiset perusteet käydään läpi yksityiskohtaisemmin. Johdannossa esitetään joitakin analyyttisiä tuloksia tällaisessa binäärissä havaittavista suhteellisuusteoreettisista ilmiöistä. Myös numeerisia menetelmiä näiden ilmiöiden tarkempaan laskemiseen esitellään. Tuloksia sovelletaan OJ287-systeemiin, ja verrataan havaintoihin. OJ287:n mustien aukkojen ratamalli muodostaa pohjan systeemin toistuvien optisten purkausten malleille. Johdannossa esitellään yksityiskohtaisemmin kaksi fysikaalista purkausmallia, ja vertaillaan niitä. Purkausten säteilyhydrodynamiikka käydään läpi, ja myös ennusteet purkausten valokäyrille johdetaan. Johdannossa esitellään myös Julkaisussa III johdettu prekursoripurkausten malli, ja osoitetaan sen sopivan yhteen OJ287:n binäärimallin kanssa. Johdanto esittelee myös relativististen suihkujen fysiikkaa sekä OJ287- systeemiin liittyen että aktiivisten galaksiydinten kontekstissa yleisesti. Relativististen suihkujen perusfysiikka esitellään, kuten myös malleja kierteisistä suihkuista. Julkaisujen II, IV ja V OJ287-systeemin suihkuja koskevat tulokset esitellään binäärimallin kontekstissa. Kokonaisuutena johdanto palvelee suppeana oppaana, joka esittelee tarvittavan fysiikan ja tarpeelliset numeeriset menetelmät mustien aukkojen binäärijärjestelmän ymmärtämiseen ja simulointiin. Tätä tarkoitusta varten johdanto yhdistää sekä perustuloksia että joitakin syvällisempiä tuloksia laajoilta fysiikan osa-alueilta kuten suhteellisuusteoriasta ja säteilyhydrodynamiikasta. Johdannon sisältämän materiaalin avulla väitöskirjan julkaisut, ja niiden esittämät tulokset, ovat hyvin ymmärrettävissä. Väitöskirjan julkaisuista ensimmäinen esittelee uusia OJ287-systeemistä saatuja havaintopisteitä, jotka on paikallistettu Harvardin yliopiston observatorion arkiston valokuvauslevyiltä. OJ287:n vuonna 1900 tapahtunut purkaus nähdään ensimmäistä kertaa näissä havaintopisteissä. Uudet havaintopisteet mahdollistivat myös vuoden 1913 purkauksen alun ajoittamisen tarkemmin kuin aiemmin oli mahdollista. Havaitut purkaukset mallinnettiin onnistuneesti simuloimalla OJ287-järjestelmän mustien aukkojen paria ja kertymäkiekkoa. Julkaisussa II käsitellään mekanismeja OJ287:n sekundäärisen mustan aukon spinin kasvamiseen vuorovaikutuksessa primäärin kertymäkiekon ja systeemin magneettikenttien kanssa. Julkaisussa arvioidaan maksimispinin saavuttamisen ja spinin suunnan vakiintumisen aikaskaalat kummallakin mekanismilla. Tutkimuksessa havaitaan sekundäärin spinin olevan todennäköisesti suuri. Julkaisu III esittelee OJ287-systeemissä maaliskuussa 2013 tapahtuneen purkauksen. Purkauksen havaittiin muistuttavan vuosina 1993 ja 2004 tapahtuneita purkauksia, joita kutsutaan yhteisnimityksellä prekursoripurkaus (precursor outburst). Julkaisussa esitellään purkauksen synnylle mekanismi, jossa OJ287-systeemin sekundäärinen musta aukko osuu primäärisen mustan aukon kertymäkiekon koronassa olevaan kaasupilveen. Mekanismin avulla johdetaan arviot prekursoripurkausten kirkkaudelle ja aikaskaalalle. Julkaisussa johdetaan myös ennuste seuraavan prekursoripurkauksen ajankohdalle. Julkaisussa IV käytetään vuosina 2004–2006 kerättyjä havaintoja OJ287- systeemistä lyhyiden jaksollisuuksien etsintään. Julkaisussa varmennetaan systeemissä esiintyvä n. 50 päivän kvasiperiodisuus. Lisäksi tilastollisesti merkittävät 250 päivän ja 3,5 päivän jaksollisuudet havaitaan. Julkaisussa esitetään malli, jossa primäärisen mustan aukon kertymäkiekossa oleva spiraalitiheysaalto aiheuttaa 50 päivän jaksollisuuden. Mallista tehty numeerinen simulaatio tukee tulosta. Systeemin relativistisen suihkun emittoima aikadilatoitunut säteily esitetään aiheuttajaksi 3,5 päivän jaksollisuusaikaskaalalle. Julkaisussa V sovitetaan kierresuihkumalli OJ287-systeemistä tehtyihin optisiin havaintoihin ja millimetri- sekä senttimetriaallonpituuden radiohavaintoihin. Suihkun rakenteen havaitaan olevan kaksijakoinen ja koostuvan ytimestä ja kuoresta. Suihkun kuorella on merkittävästi pienempi Lorentzin gamma-tekijä kuin suihkun ytimellä. Kuoren avautumiskulma ja Lorentztekijä sekä suihkun kierteen aallonpituus raportoidaan julkaisussa ensimmäistä kertaa.

Pienet erikoiskaupat Big datan aikakaudella: Asiakastiedonjohtamisen edellyttämät strategiset orientaatiot.

This master’s thesis has examined how Entrepreneurial, Customer and Knowledge Management Orientations are needed in the use of Big data technology by small retail firms in their Customer Knowledge Management. A vision of the ability of small retailers to move to the Big data era is based on empirical evidence of owner-managers’ attitudes and the firms’ processes. Abductive content analysis was used as a research strategy and the qualitative data was collected through theme interviews of owner-managers of 11 small-size retail firms. The biggest obstacles to the use of Big data by small retail firms are: a lack of information about the new technology; a lack of Knowledge Management Orientation; and, a lack of proactive dimension in Entrepreneurial and Customer Orientations. A strong reactive customer-led orientation, and the ability of the owner-manager to system thinking will support Customer Knowledge Management development. The low stage of technology-use is preventing utilization of customer information. Co-operation between firms or with educational organizations may significantly enhance the use of Big data –technology by small retail firms.

Synthesis of Short Oligonucleotides on a Soluble Support by the Phosphoramidite Method

In the last decades, the chemical synthesis of short oligonucleotides has become an important aspect of study due to the discovery of new functions for nucleic acids such as antisense oligonucleotides (ASOs), aptamers, DNAzymes, microRNA (miRNA) and small interfering RNA (siRNA). The applications in modern therapies and fundamental medicine on the treatment of different cancer diseases, viral infections and genetic disorders has established the necessity to develop scalable methods for their cheaper and easier industrial manufacture. While small scale solid-phase oligonucleotide synthesis is the method of choice in the field, various challenges still remain associated with the production of short DNA and RNA-oligomers in very large quantities. On the other hand, solution phase synthesis of oligonucleotides offers a more predictable scaling-up of the synthesis and is amenable to standard industrial manufacture techniques. In the present thesis, various protocols for the synthesis of short DNA and RNA oligomers have been studied on a peracetylated and methylated β-cyclodextrin, and also on a pentaerythritol-derived support. On using the peracetylated and methylated β-cyclodextrin soluble supports, the coupling cycle was simplified by replacement of the typical 5′-O-(4,4′-dimethoxytrityl) protecting group with an acid-labile acetal-protected 5′-O-(1-methoxy-1-methylethyl) group, which upon acid-catalyzed methanolysis released easily removable volatile products. For this reason monomeric building blocks 5′-O-(1-methoxy-1-methylethyl) 3′-(2-cyano-ethyl-N,N-diisopropylphosphoramidite) were synthesized. Alternatively, on using the precipitative pentaerythritol support, novel 2´-O-(2-cyanoethyl)-5´-O-(1-methoxy-1-methylethyl) protected phosphoramidite building blocks for RNA synthesis have been prepared and their applicability by the synthesis of a pentamer was demonstrated. Similarly, a method for the preparation of short RNAs from commercially available 5´-O-(4,4´-dimethoxytrityl)-2´-O-(tert-butyldimethyl-silyl)ribonucleoside 3´-(2-cyanoethyl-N,N-diisopropylphosphoramidite) building blocks has been developed

IFRS 9 – standardiuudistus Big Four -tilintarkastusyhteisöjen näkökulmasta – kommenttikirjeiden empiirinen analyysi

Since 2008, One of the International Accounting Standards Board’s (IASB) objective has been to replace the old IAS 39 – Financial Instruments standard. IASB achieved this objective in July 2014 when they published the new IFRS 9 – Financial Instruments after many phases. In this study, the main purpose was to find out how the Big Four – audit entities have welcomed the different reforms which IFRS 9 brings to the treatment of financial instruments in the financial statements. Alongside with this, the study presents a short overview to the common attitude towards the new standard. The study proceeds so that the most siginificant reforms have been divided into three main categories and inside of these more precisely to single reforms. This study is based on the qualitative research method. The empirical data of the study consists of comment letters by the Big Four – entities, which have been sent to the IASB regarding Exposure Drafts (ED) of IFRS 9. In total IASB received 757 comment letters regarding to the specific EDs. In this study the population were restricted to 16 comment letters sent by the Big Four – entities. The data is available at IFRS Foundation’s website. According to the research results Big Four – entities think that the reforms which IFRS 9 brings are mainly welcome. In its entirety Big Four – entities consider IFRS 9 better than its predecessor IAS 39. There were differnces in opinions towards IFRS 9 and specific reforms among the Big Four - entities. According to the findings the best reforms were related to the efficiency demands of hedge accounting and to impairments and the valuation of credit losses. The least popular reforms were the reforms regarding the measurement of financial assets and liabilities; more specifically fair value option and the reforms concerning equity instruments were viewed as most challenging.

The Mexican Dream, What Drives the Mexican Millennial to invest?

The Mexican dream is the equivalent of the American Dream for Mexico. This thesis explores what is the equivalent of the American Dream for young Mexican adults (25 to 35 year old Mexicans). The aim of the study is to develop an understanding of the core values of young Mexican adults. The study is made for a case company, Expertos Patrimoniales Wealth Management Advisors, who intend to sell financial management services to these young Mexican adults in the next 5 to 10 years. This study implements a cross-cultural consumer behavior framework by David Luna, in order to consider factors like culture, and value systems to uncover the Mexican Dream for young Mexican adults. In order to gather data for this study, key informants were interviewed in specific areas, such as culture, financial consumer behavior and Mexican culture among others. The results suggest that independence is a strong driver for the young Mexican adults, independence from their family, from the corporate hierarchy and men. These core drivers differ from the traditional culture values where hierarchy and a secure job, family which includes the extended family and women´s economic dependency on men have been strong. Images of the future are created in order to understand the young Mexican adults Mexican Dream in the next 5 to 10 years, in order to provide useful information for the case company for the development of products and services that this segment of the Mexican market might find interesting in the near future.