ROBOTTIHITSAUKSEN KÄYTTÖÖNOTON EDELLYTYKSET ASIAKASOHJAUTUVASSA YKSITTÄIS- JA PIENSARJATUOTANNOSSA

Diplomityö koostuu teoria- ja tutkimusosasta. Teoriaosassa on käsitelty robottihitsaus-järjestelmän hankinnan edellytyksiä asiakasohjautuvan yksittäis- ja piensarjatuotannon lähtökohdista. Tarkastelun osa-alueita ovat asiakasohjautuva tuotanto, robottihitsaus yksittäis- ja piensarjatuotannossa, robottien ohjelmointimenetelmät, robottihitsauksen laatu ja laadunvarmistus, tehokkuus, tuottavuus, kannattavuus, robottihitsattavan tuotteen ja robottihitsausjärjestelmän suunnittelu, robottihitsausaseman turvallisuus sekä robotti-järjestelmän toteutus ja käyttöönotto. Teoriaosa on koottu siten, että sitä voidaan käyttää myös oppimateriaalina. Siinä esitetään myös sovellusesimerkki Imatran ammattikoululla toteutetusta robottihitsausaseman turvallisuusrakenneratkaisusta, jonka on suunnitellut ja toteuttanut diplomityön laatija. Diplomityön tutkimusosassa selvitetään kyselytutkimuksen avulla robottihitsauksen käyt-töönoton edellytyksiä asiakasohjautuvassa yksittäis- ja piensarjatuotannossa eteläkarjalai-sissa konepaja- ja metallialan yrityksissä. Tutkimukseen mukaan valituille 25 yritykselle ja yrityksistä valituille vastuuhenkilöille lähetettiin kirjallinen kyselytutkimus, johon vastaus saatiin 17 yritykseltä. Diplomityön tavoitteena oli selvittää robottihitsauksen käyttöönoton edellytyksiä. Tutkimuksella haettiin tietoja myös muusta yritysten suunnittelemasta hitsaus-tuotannon kehittämisestä kuten mekanisoinnista ja sen nykytilasta sekä muista mahdollisista hitsaukseen liittyvistä hankkeista. Tutkimustulosten perusteella on todettavissa, että Etelä-Karjalassa toimivista asiakas-ohjautuvista yksittäis- ja piensarjatuotantoa harjoittavista konepaja- ja metallialan yri-tyksistä löytyy yrityksiä, jotka ovat kiinnostuneita robottihitsausjärjestelmän hankinnasta, mutta saatujen tulosten perusteella voidaan todeta, että edellytyksiä siihen ei vielä näyttäisi olevan. Syiksi robottihitsausjärjestelmän hankinnan edellytysten puuttumiseen voidaan mainita muun muassa sopimaton tuoterakenne, liian yksilölliset tuotteet ja pienet sarjat, joilla ei ole toistuvuutta. Lisäksi yritykset toimivat pelkästään alihankintayrityksinä eikä niillä ole omaa tuotetta. Robottihitsausjärjestelmän hankinta voisi olla mahdollista niissä yrityksissä, jotka ovat verkottuneet, toimivat vakaavaraisesti ja joiden viennistä osa suuntautuu välillisesti tai välittömästi ulkomaille. Yhteistyöverkkojen voidaan olettaa parantavan robottihitsaus-järjestelmän hankinnan mahdollisuuksia. Tällöin kustannuksia voidaan jakaa usealle eri yritykselle ja siten voidaan tehostaa myös järjestelmän käyttöastetta sekä hankkia uusia asiakkaita. Kaksi yrityksistä on harkinnut joko oman tai leasing-robottihitsausjärjestelmän hankintaa. Ongelmina robottihitsausjärjestelmän yhteishankinnalle pidettiin esim. kenen tiloihin järjestelmä hankitaan, kuka huolehtii kunnossapidosta, miten palkat maksetaan työntekijöille ja miten käytössä oleva työaika jaetaan eri yrityksille. Diplomityön johtopäätökset ja suositukset osassa esitetään muutamia jatkotoimenpide-ehdotuksia siitä, kuinka tiettyjen yritysten osalta voitaisiin robottihitsauksen käyttöönottoa edistää. Tutkimuksen tuloksena saatua tietoa hyödynnetään muun muassa Lappeenrannan teknillisen yliopiston tutkimus- ja koulutushankkeissa sekä toisen asteen kone- ja metallitekniikan koulutuksen suunnittelussa ja toteutuksessa.

Baltian maiden sähkömarkkinat

Tässä kandidaatintutkielmassa on tarkoituksena selvittää Baltian maiden sähkömarkkinoi- den kehittymistä ja avautumista kilpailulle. Baltian maiden sähkömarkkinoiden kehittymis- tä on vauhdittanut EU:n energiapolitiikka, jolla pyritään edistämään toimivien yhteiseu- rooppalaisten sähkömarkkinoiden kehittymistä. Baltian maista tullaankin lähitulevaisuu- dessa rakentamaan lisäsiirtoyhteyksiä Pohjoismaihin ja Eurooppaan. Työssä tutkitaan myös Baltian maiden sähköntuotantorakenteen muodostumista ja sähkönsiirtoverkon ra- kennetta. Suomen ja Venäjän välisessä sähkökaupassa on tapahtunut merkittäviä muutok- sia syksyn 2011 jälkeen. Tutkitaan myös Venäjän ja Baltian maiden välistä sähkönsiirtoa.

Kaukolämmön hinnoittelumallien optimointi ja kehittäminen muuttuvassa toimintaympäristössä

Kaukolämpöliiketoiminnan kehittämistarve korostuu jatkuvasti alan rakennemuutosten ja markkinoiden muutoksien seurauksena. Turku Energian tavoitteena on uudistaa ja kehittää kaukolämmön hinnoitteluaan vastaamaan energian tuotannon, jakelun, loppukäytön ja muihin alan muutoksiin. Tässä opinnäytetyössä tutkitaan kaukolämmön hinnoittelun optimointi ja kehittämistä nykyisessä sekä tulevaisuuden markkina- ja tuotantorakenteessa. Nykyisen hinnoittelumallin lisäksi tutkitaan vaihtoehtoisia tapoja hinnoitella myytävä kaukolämpöenergia, kuten vuodenaikojen mukaan määriteltävä muuttuva energianhinta. Työn kirjallisuusosassa esitellään kaukolämmön tuotanto, siirto ja jakelu sekä liiketoiminta Suomessa ja Turun seudulla. Tutkittavat hinnoittelumallit perustuvat todellisiin ja arvioituihin liiketoiminnan kustannuksiin, sekä esitettyihin laskentaperiaatteisiin. Turku Energian nykyistä perusmaksun hintatasoa tulee korottaa, jotta se vastaa lämmönhankinnan kiinteitä kustannuksia tarkemmin ja minimoi liiketoiminnan markkinariskiä. Nykyisen hinnoittelun verokomponentin kehittämisellä lisätään hinnoittelun läpinäkyvyyttä. Kausihinnoittelun avulla energianhinta noudattaa tuotannon kustannuksia vuoden aikana ja ohjaa asiakkaiden lämmönkulutusta nykyistä tarkemmin. Uusiutuvilla energianlähteillä tuotettua kaukolämpöä voidaan myydä erillisillä tuotteilla, joiden avulla liiketoiminnalle saadaan lisäarvoa.

Climate change and global responsibility - the role of energy consumption, GDP and CO2 emissions

Climate change is one of the biggest challenges faced by this generation. Despite being the single most important environmental challenge facing the planet and despite over two decades of international climate negotiations, global greenhouse gas (GHG) emissions continue to rise. By the middle of this century, GHGs must be reduced by as much as 40-70% if dangerous climate change is to be avoided. In the Kyoto Protocol no quantitative emission limitation and reduction commitments were placed on the developing countries. For the planning of the future commitments period and possible participation of developing countries, information of the functioning of the energy systems, CO2 emissions development in different sectors, energy use and technological development in developing countries is essential. In addition to the per capita emissions, the efficiency of the energy system in relation to GHG emissions is crucial for the decision of future long-term burden sharing between countries. Country’s future development of CO2 emissions can be defined by the estimated CO2 intensity of the future and the estimated GDP growth. The changes in CO2 intensity depend on several factors, but generally developed countries’ intensity has been increasing in the industrialization phase and decreasing when their economy shifts more towards the system dominated by the service sector. The level of the CO2 intensity depends by a large extent on the production structure and the energy sources that are used. Currently one of the most urgent issues regarding global climate change is to decide the future of the Kyoto Protocol. Negotiations on this topic have already been initiated, with the aim of being finalised by the 2015. This thesis provides insights into the various approaches that can be used to characterise the concept of comparable efforts for developing countries in a future international climate agreement. The thesis examines the post-Kyoto burden sharing questions for developing countries using the contraction and convergence model, which is one approach that has been proposed to allocate commitments regarding future GHG emissions mitigation. This new approach is a practical tool for the evaluation of the Kyoto climate policy process and global climate change negotiations from the perspective of the developing countries.

Growth, crown structure and seed production of birch seedlings, grafts and micropropagated plants

Summary

Distributed Energy Production in the North-West Region of Russia

The energy system of Russia is the world's fourth largest measured by installed power. The largest are that of the the United States of America, China and Japan. After 1990, the electricity consumption decreased as a result of the Russian industry crisis. The vivid economic growth during the latest few years explains the new increase in the demand for energy resources within the State. In 2005 the consumption of electricity achieved the maximum level of 1990 and continues to growth. In the 1980's, the renewal of power facilities was already very slow and practically stopped in the 1990's. At present, the energy system can be very much characterized as outdated, inefficient and uneconomic because of the old equipment, non-effective structure and large losses in the transmission lines. The aim of Russia's energy reform, which was started in 2001, is to achieve a market based energy policy by 2011. This would thus remove the significantly state-controlled monopoly in Russia's energy policy. The reform will stimulateto decrease losses, improve the energy system and employ energy-saving technologies. The Russian energy system today is still based on the use of fossil fuels, and it almost totally ignores the efficient use of renewable sources such as wind, solar, small hydro and biomass, despite of their significant resources in Russia. The main target of this project is to consider opportunities to apply renewable energy production in the North-West Federal Region of Russia to partly solve the above mentioned problems in the energy system.

Logging residues from regeneration fellings for biofuel production - a GIS-based availability and supply cost analysis

Finland has large forest fuel resources. However, the use of forest fuels for energy production has been low, except for small-scale use in heating. According to national action plans and programs related to wood energy promotion, the utilization of such resources will be multiplied over the next few years. The most significant part of this growth will be based on the utilization of forest fuels, produced from logging residues of regeneration fellings, in industrial and municipal power and heating plants. Availability of logging residues was analyzed by means of resource and demand approaches in order to identify the most suitable regions with focus on increasing the forest fuel usage. The analysis included availability and supply cost comparisons between power plant sites and resource allocation in a least cost manner, and between a predefined power plant structure under demand and supply constraints. Spatial analysis of worksite factors and regional geographies were carried out using the GIS-model environment via geoprocessing and cartographic modeling tools. According to the results of analyses, the cost competitiveness of forest fuel supply should be improved in order to achieve the designed objectives in the near future. Availability and supply costs of forest fuels varied spatially and were very sensitive to worksite factors and transport distances. According to the site-specific analysis the supply potential between differentlocations can be multifold. However, due to technical and economical reasons ofthe fuel supply and dense power plant infrastructure, the supply potential is limited at plant level. Therefore, the potential and supply cost calculations aredepending on site-specific matters, where regional characteristics of resourcesand infrastructure should be taken into consideration, for example by using a GIS-modeling approach constructed in this study.

Development of Collaborative Product Structure Management

The purpose of this thesis is to develop an environment or network that enables effective collaborative product structure management among stakeholders in each unit, throughout the entire product lifecycle and product data management. This thesis uses framework models as an approach to the problem. Framework model methods for development of collaborative product structure management are proposed in this study, there are three unique models depicted to support collaborative product structure management: organization model, process model and product model. In the organization model, the formation of product data management system (eDSTAT) key user network is specified. In the process model, development is based on the case company’s product development matrix. In the product model framework, product model management, product knowledge management and design knowledge management are defined as development tools and collaboration is based on web-based product structure management. Collaborative management is executed using all these approaches. A case study from an actual project at the case company is presented as an implementation; this is to verify the models’ applicability. A computer assisted design tool and the web-based product structure manager, have been used as tools of this collaboration with the support of the key user. The current PDM system, eDSTAT, is used as a piloting case for key user role. The result of this development is that the role of key user as a collaboration channel is defined and established. The key user is able to provide one on one support for the elevator projects. Also the management activities are improved through the application of process workflow by following criteria for each project milestone. The development shows effectiveness of product structure management in product lifecycle, improved production process by eliminating barriers (e.g. improvement of two-way communication) during design phase and production phase. The key user role is applicable on a global scale in the company.

Quality management of outsourcing welded structure: case China

For any international companies who wish to enter the Chinese market, quality is base on the fundamental. The companies are coming to realize the importance of quality gradually, thus companies have been put the quality problems on the agenda. The competitiveness of companies comes from quality. Quality is the key to success, and it can decide that the companies can be accepted or eliminated by the market. Due to the obvious benefits, the demand of the method of how to achieve high quality of product keeps growing. During achieving the high quality process, the main troubles come from the impact between Eastern and Western culture. Chinese culture which is different with Western one have lasted as long as five thousand years. Such a culture deeply rooted in the hearts of Chinese people, and effected generation after generation of Chinese people's working style and ways of thinking. This thesis determines how to find a good fit point between Eastern and Western culture. Doing right thing by the right way. The nature of improving quality is improving management level in fact. "How to manage, who should be managed", the thesis explains the basic and best option to achieve those. It describes three-dimension-style management to monitoring the working process. This kind of management style can inspect production process from horizontal and vertical direction. In this management way, it defines effective evaluation system to every subcontractor, and makes the companies to achieve the ultimate goal - satisfy quality. Because of the importance of human factor, the thesis determines the range of training of the inspector and welder due to the current situation of China. The results show that in order to reach reliable training effective evaluation, not only the quality of the human but also the ultimate goal of product quality.

Combining Productivity and Renewal in a Production Organization: a Case Study on Organizational Ambidexterity

This case study examined how productivity and renewal are combined in a production organization operating in process industry through the antecedents of organizational ambidexterity; structure, culture, and management. The empirical material consisted of semi-structured interviews, observations and case organization documents. The findings suggest that the case organization structurally separates exploitation and exploration to separate units. However, it was found that the units focusing on exploration also devote resources to exploitation. External networks, such as customers, suppliers, and other factories seemed to play a role in the exploration activities, as well as in learning activities, which were connected to renewal. Productivity was seen as a natural part of a production organization and pursued at manufacturing units. Process management techniques appeared to be spread across the organization and having positive impact on exploitation and negative impact on exploration. The managerial culture and management’s capability to communicate goals, vision and strategy was found to be unsatisfactory. This thesis contributes to the new research paradigm of organizational ambidexterity by providing unique results on how the antecedents of organizational ambidexterity are accomplished in a production organization. Furthermore, the thesis extends the previous research of organizational renewal capability by connecting it to the ambidexterity theory.

Prediction of 3D structure and ligand-binding properties : ABC transporters and flavodiiron proteins from Synechocystis sp. strain PCC 6803

Cyanobacteria are unicellular, non-nitrogen-fixing prokaryotes, which perform photosynthesis similarly as higher plants. The cyanobacterium Synechocystis sp. strain PCC 6803 is used as a model organism in photosynthesis research. My research described herein aims at understanding the function of the photosynthetic machinery and how it responds to changes in the environment. Detailed knowledge of the regulation of photosynthesis in cyanobacteria can be utilized for biotechnological purposes, for example in the harnessing of solar energy for biofuel production. In photosynthesis, iron participates in electron transfer. Here, we focused on iron transport in Synechocystis sp. strain PCC 6803 and particularly on the environmental regulation of the genes encoding the FutA2BC ferric iron transporter, which belongs to the ABC transporter family. A homology model built for the ATP-binding subunit FutC indicates that it has a functional ATPbinding site as well as conserved interactions with the channel-forming subunit FutB in the transporter complex. Polyamines are important for the cell proliferation, differentiation and apoptosis in prokaryotic and eukaryotic cells. In plants, polyamines have special roles in stress response and in plant survival. The polyamine metabolism in cyanobacteria in response to environmental stress is of interest in research on stress tolerance of higher plants. In this thesis, the potd gene encoding an polyamine transporter subunit from Synechocystis sp. strain PCC 6803 was characterized for the first time. A homology model built for PotD protein indicated that it has capability of binding polyamines, with the preference for spermidine. Furthermore, in order to investigate the structural features of the substrate specificity, polyamines were docked into the binding site. Spermidine was positioned very similarly in Synechocystis PotD as in the template structure and had most favorable interactions of the docked polyamines. Based on the homology model, experimental work was conducted, which confirmed the binding preference. Flavodiiron proteins (Flv) are enzymes, which protect the cell against toxicity of oxygen and/or nitric oxide by reduction. In this thesis, we present a novel type of photoprotection mechanism in cyanobacteria by the heterodimer of Flv2/Flv4. The constructed homology model of Flv2/Flv4 suggests a functional heterodimer capable of rapid electron transfer. The unknown protein sll0218, encoded by the flv2-flv4 operon, is assumed to facilitate the interaction of the Flv2/Flv4 heterodimer and energy transfer between the phycobilisome and PSII. Flv2/Flv4 provides an alternative electron transfer pathway and functions as an electron sink in PSII electron transfer.

Aqueous-phase reforming of renewables for selective hydrogen production in the presence of supported platinum catalysts

The evolution of our society is impossible without a constant progress in life-important areas such as chemical engineering and technology. Innovation, creativity and technology are three main components driving the progress of chemistry further towards a sustainable society. Biomass, being an attractive renewable feedstock for production of fine chemicals, energy-rich materials and even transportation fuels, captures progressively new positions in the area of chemical technology. Knowledge of heterogeneous catalysis and chemical technology applied to transformation of biomass-derived substances will open doors for a sustainable economy and facilitates the discovery of novel environmentally-benign processes which probably will replace existing technologies in the era of biorefinary. Aqueous-phase reforming (APR) is regarded as a promising technology for production of hydrogen and liquids fuels from biomass-derived substances such as C3-C6 polyols. In the present work, aqueous-phase reforming of glycerol, xylitol and sorbitol was investigated in the presence of supported Pt catalysts. The catalysts were deposited on different support materials, including Al2O3, TiO2 and carbons. Catalytic measurements were performed in a laboratory-scale continuous fixedbed reactor. An advanced analytical approach was developed in order to identify reaction products and reaction intermediates in the APR of polyols. The influence of the substrate structure on the product formation and selectivity in the APR reaction was also investigated, showing that the yields of the desired products varied depending on the substrate chain length. Additionally, the influence of bioethanol additive in the APR of glycerol and sorbitol was studied. A reaction network was advanced explaining the formation of products and key intermediates. The structure sensitivity in the aqueous-phase reforming reaction was demonstrated using a series of platinum catalysts supported on carbon with different Pt cluster sizes in the continuous fixed-bed reactor. Furthermore, a correlation between texture physico-chemical properties of the catalysts and catalytic data was established. The effect of the second metal (Re, Cu) addition to Pt catalysts was investigated in the APR of xylitol showing a superior hydrocarbon formation on PtRe bimetallic catalysts compared to monometallic Pt. On the basis of the experimental data obtained, mathematical modeling of the reaction kinetics was performed. The developed model was proven to successfully describe experimental data on APR of sorbitol with good accuracy.

Production unit’s overhead cost allocation with activity-based costing in food industry enterprise

The main objective of this Master’s thesis is to develop a cost allocation model for a leading food industry company in Finland. The goal is to develop an allocation method for fixed overhead expenses produced in a specific production unit and create a plausible tracking system for product costs. The second objective is to construct an allocation model and modify the created model to be suited for other units as well. Costs, activities, drivers and appropriate allocation methods are studied. This thesis is started with literature review of existing theory of ABC, inspecting cost information and then conducting interviews with officials to get a general view of the requirements for the model to be constructed. The familiarization of the company started with becoming acquainted with the existing cost accounting methods. The main proposals for a new allocation model were revealed through interviews, which were utilized in setting targets for developing the new allocation method. As a result of this thesis, an Excel-based model is created based on the theoretical and empiric data. The new system is able to handle overhead costs in more detail improving the cost awareness, transparency in cost allocations and enhancing products’ cost structure. The improved cost awareness is received by selecting the best possible cost drivers for this situation. Also the capacity changes are taken into consideration, such as usage of practical or normal capacity instead of theoretical is suggested to apply. Also some recommendations for further development are made about capacity handling and cost collection.

PHC Production Management System Based on RFID

At present, in large precast concrete enterprises, the management over precast concrete component has been chaotic. Most enterprises take labor-intensive manual input method, which is time consuming and laborious, and error-prone. Some other slightly better enterprises choose to manage through bar-code or printing serial number manually. However, on one hand, this is also labor-intensive, on the other hand, this method is limited by external environment, making the serial number blur or even lost, and also causes a big problem on production traceability and quality accountability. Therefore, to realize the enterprise’s own rapid development and cater to the needs of the time, to achieve the automated production management has been a big problem for a modern enterprise. In order to solve the problem, inefficiency in production and traceability of the products, this thesis try to introduce RFID technology into the production of PHC tubular pile. By designing a production management system of precast concrete components, the enterprise will achieve the control of the entire production process, and realize the informatization of enterprise production management. RFID technology has been widely used in many fields like entrance control, charge management, logistics and so on. RFID technology will adopt passive RFID tag, which is waterproof, shockproof, anti-interference, so it’s suitable for the actual working environment. The tag will be bound to the precast component steel cage (the structure of the PHC tubular pile before the concrete placement), which means each PHC tubular pile will have a unique ID number. Then according to the production procedure, the precast component will be performed with a series of actions, put the steel cage into the mold, mold clamping, pouring concrete (feed), stretching, centrifugalizing, maintenance, mold removing, welding splice. In every session of the procedure, the information of the precast components can be read through a RFID reader. Using a portable smart device connected to the database, the user can check, inquire and management the production information conveniently. Also, the system can trace the production parameter and the person in charge, realize the traceability of the information. This system can overcome the disadvantages in precast components manufacturers, like inefficiency, error-prone, time consuming, labor intensity, low information relevance and so on. This system can help to improve the production management efficiency, and can produce a good economic and social benefits, so, this system has a certain practical value.

Measuring and improving production efficiency of paint filling and packing line

Tutkittu yritys on suomalainen maaleja ja lakkoja kansainvälisesti valmistava ja myyvä toimija. Yrityksessä otettiin vuonna 2010 käyttöön uudet tuotannon ja toimitusketjun tavoitteet ja suunnitelmat ja tämä tutkimus on osa tuota kokonaisvaltaista kehittämissuuntaa. Tutkimuksessa käsitellään tuotannon ja kunnossapidon tehokkuuden parantamis- ja mittaustyökalu OEE:tä ja tuotevaihtoaikojen pienentämiseen tarkoitettua SMED -työkalua. Työn teoriaosuus perustuu lähinnä akateemisiin julkaisuihin, mutta myös haastatteluihin, kirjoihin, internet sivuihin ja yhteen vuosikertomukseen. Empiriaosuudessa OEE:n käyttöönoton ongelmia ja onnistumista tutkittiin toistettavalla käyttäjäkyselyllä. OEE:n potentiaalia ja käyttöönottoa tutkittiin myös tarkastelemalla tuotanto- ja käytettävyysdataa, jota oli kerätty tuotantolinjalta. SMED:iä tutkittiin siihen perustuvan tietokoneohjelman avulla. SMED:iä tutkittiin teoreettisella tasolla, eikä sitä implementoitu vielä käytäntöön. Tutkimustuloksien mukaan OEE ja SMED sopivat hyvin esimerkkiyritykselle ja niissä on paljon potentiaalia. OEE ei ainoastaan paljasta käytettävyyshäviöiden määrää, mutta myös niiden rakenteen. OEE -tulosten avulla yritys voi suunnata rajalliset tuotannon ja kunnossapidon parantamisen resurssit oikeisiin paikkoihin. Työssä käsiteltävä tuotantolinja ei tuottanut mitään 56 % kaikesta suunnitellusta tuotantoajasta huhtikuussa 2016. Linjan pysähdyksistä ajallisesti 44 % johtui vaihto-, aloitus- tai lopetustöistä. Tuloksista voidaan päätellä, että käytettävyyshäviöt ovat vakava ongelma yrityksen tuotannontehokkuudessa ja vaihtotöiden vähentäminen on tärkeä kehityskohde. Vaihtoaikaa voitaisiin vähentää ~15 % yksinkertaisilla ja halvoilla SMED:illä löydetyillä muutoksilla työjärjestyksessä ja työkaluissa. Parannus olisi vielä suurempi kattavimmilla muutoksilla. SMED:in suurin potentiaali ei välttämättä ole vaihtoaikojen lyhentämisessä vaan niiden standardisoinnissa.