Performance Evaluation of Six-Sectored Configuration in Hexagonal WCDMA (UMTS) Cellular Network Layout

The objective of this master's thesis is to evaluate the optimum performance of sixsectored hexagonal layout of WCDMA (UMTS) network and analyze the performance at the optimum point. The maximum coverage and the maximum capacity are the main concern of service providers and it is always a challenging task for them to achieve economically. Because the optimum configuration of a network corresponds to a configuration which minimizes the number of sites required to provide a target service probability in the planning area which in turn reduces the deployment cost. The optimum performance means the maximum cell area and themaximum cell capacity the network can provide at the maximum antenna height satisfying the target service probability. Hexagon layout has been proven as the best layout for the cell deployment. In this thesis work, two different configurations using six-sectored sites have been considered for the performance comparison. In first configuration, each antenna is directed towards each corner of hexagon, whereas in second configurationeach antenna is directed towards each side of hexagon. The net difference in the configurations is the 30 degree rotation of antenna direction. The only indoor users in a flat and smooth semi-urban environment area have been considered for the simulation purpose where the traffic distribution is 100 Erl/km2 with 12.2 kbps speech service having maximum mobile speed of 3 km/hr. The simulation results indicate that a similar performance can be achieved in both the configurations, that is, a maximum of 947 m cellrange at antenna height of 49.5 m can be achieved when the antennas are directed towards the corner of hexagon, whereas 943.3 m cell range atantenna height of 54 m can be achieved when the antennas are directed towards the side of hexagon. However, from the interference point of view the first configuration provides better results. The simulation results also show that the network is coverage limited in both the uplink and downlink direction at the optimum point.

Guidelines for supplier selection and performance evaluation in the case-company

Tutkielmantavoitteena oli luoda ohjeistus toimittajan valinnasta ja suorituskyvyn arvioinnista case - yrityksen, Exel Oyj:n, käyttöön. Ohjeistuksen tarkoituksena oli ollalähtökohtana toimittajan valinta- ja suoristuskyvyn arviointiprosessien kehittämisessä. Tutkielma keskittyy esittelemään toimittajan valintakriteereitä ja toimittajan suorituskyvyn arviointikriteereitä. Kriteerit valittiin ja analysoitiin teorian ja empirian avulla ja kriteereistä tehtiin selkeät listaukset. Näitä listoja käytettiin avuksi pohdittaessa uusia valintakriteereitä ja suorituskyvyn arviointikriteereitä, joita case -yritys voi jatkossa käyttää. Tutkielmassa käytiin läpi myös toimittajan valintaprosessi jaapuvälineitä ja mittareita toimittajan arviointiin liittyen. Empiirisen aineiston keruu toteutettiin haastattelemalla hankintapäällikköä sekä keräämällä tietoavuosikertomuksesta ja yrityksen internet sivuilta. Tutkielman tuloksena saatiinlistauksia kriteereistä, joita yritys voi hyödyntää jatkossa sekä listaukset kriteereistä, jotka valittiin alustavasti yrityksen käyttöön.

Performance Evaluation of Imaging Systems

Imaging systems have developed latest years and developing is still continuing following years. Manufacturers of imaging systems give promises for the quality of the performance of imaging systems to advertise their products. Promises for the quality of the performance are often so good that they will not be tested in normal usage. The main target in this research is to evaluate the quality of the performance of two imaging systems: Scanner and CCD color camera. Optical measurement procedures were planned to evaluate the quality of imaging performances. Other target in this research is to evaluate calibration programs for the camera and the scanner. Measuring targets had to choose to evaluate the quality of imaging performances. Manufacturers have given definitions for targets. The third task in this research is to evaluate and consider how good measuring targets are.

Performance Evaluation and Calibration of Machine Vision Measurement

This thesis presents the calibration and comparison of two systems, a machine vision system that uses 3 channel RGB images and a line scanning spectral system. Calibration. is the process of checking and adjusting the accuracy of a measuring instrument by comparing it with standards. For the RGB system self-calibrating methods for finding various parameters of the imaging device were developed. Color calibration was done and the colors produced by the system were compared to the known colors values of the target. Software drivers for the Sony Robot were also developed and a mechanical part to connect a camera to the robot was also designed. For the line scanning spectral system, methods for the calibrating the alignment of the system and the measurement of the dimensions of the line scanned by the system were developed. Color calibration of the spectral system is also presented.

Sustainable Waste-to-Energy Production: Performance Evaluation of Distributed Generation fuelled by Landfill Gas

The environmental impact of landfill is a growing concern in waste management practices. Thus, assessing the effectiveness of the solutions implemented to alter the issue is of importance. The objectives of the study were to provide an insight of landfill advantages, and to consolidate landfill gas importance among others alternative fuels. Finally, a case study examining the performances of energy production from a land disposal at Ylivieska was carried out to ascertain the viability of waste to energy project. Both qualitative and quantitative methods were applied. The study was conducted in two parts; the first was the review of literatures focused on landfill gas developments. Specific considerations were the conception of mechanism governing the variability of gas production and the investigation of mathematical models often used in landfill gas modeling. Furthermore, the analysis of two main distributed generation technologies used to generate energy from landfill was carried out. The review of literature revealed a high influence of waste segregation and high level of moisture content for waste stabilization process. It was found that the enhancement in accuracy for forecasting gas rate generation can be done with both mathematical modeling and field test measurements. The result of the case study mainly indicated the close dependence of the power output with the landfill gas quality and the fuel inlet pressure.

Mutual Fund Performance Evaluation

A narrow review on mutual fund performance evaluation methods.

Mixing performance evaluation of additive manufactured milli-scale reactors

The mixing performance of three passive milli-scale reactors with different geometries was investigated at different Reynolds numbers. The effects of design and operating characteristics such as mixing channel shape and volume flow rate were investigated. The main objective of this work was to demonstrate a process design method that uses on Computational Fluid Dynamics (CFD) for modeling and Additive Manufacturing (AM) technology for manufacture. The reactors were designed and simulated using SolidWorks and Fluent 15.0 software, respectively. Manufacturing of the devices was performed with an EOS M-series AM system. Step response experiments with distilled Millipore water and sodium hydroxide solution provided time-dependent concentration profiles. Villermaux-Dushman reaction experiments were also conducted for additional verification of CFD results and for mixing efficiency evaluation of the different geometries. Time-dependent concentration data and reaction evaluation showed that the performance of the AM-manufactured reactors matched the CFD results reasonably well. The proposed design method allows the implementation of new and innovative solutions, especially in the process design phase, for industrial scale reactor technologies. In addition, rapid implementation is another advantage due to the virtual flow design and due to the fast manufacturing which uses the same geometric file formats.

Online MBPeT dashboard : enabling performance testing as a service in the cloud

In this thesis, tool support is addressed for the combined disciplines of Model-based testing and performance testing. Model-based testing (MBT) utilizes abstract behavioral models to automate test generation, thus decreasing time and cost of test creation. MBT is a functional testing technique, thereby focusing on output, behavior, and functionality. Performance testing, however, is non-functional and is concerned with responsiveness and stability under various load conditions. MBPeT (Model-Based Performance evaluation Tool) is one such tool which utilizes probabilistic models, representing dynamic real-world user behavior patterns, to generate synthetic workload against a System Under Test and in turn carry out performance analysis based on key performance indicators (KPI). Developed at Åbo Akademi University, the MBPeT tool is currently comprised of a downloadable command-line based tool as well as a graphical user interface. The goal of this thesis project is two-fold: 1) to extend the existing MBPeT tool by deploying it as a web-based application, thereby removing the requirement of local installation, and 2) to design a user interface for this web application which will add new user interaction paradigms to the existing feature set of the tool. All phases of the MBPeT process will be realized via this single web deployment location including probabilistic model creation, test configurations, test session execution against a SUT with real-time monitoring of user configurable metric, and final test report generation and display. This web application (MBPeT Dashboard) is implemented with the Java programming language on top of the Vaadin framework for rich internet application development. The Vaadin framework handles the complicated web communications processes and front-end technologies, freeing developers to implement the business logic as well as the user interface in pure Java. A number of experiments are run in a case study environment to validate the functionality of the newly developed Dashboard application as well as the scalability of the solution implemented in handling multiple concurrent users. The results support a successful solution with regards to the functional and performance criteria defined, while improvements and optimizations are suggested to increase both of these factors.

Excelling in procurement : IT Contract Management with Lean and Six Sigma. Case study on legacy contract management at Philips Global IT.

Few people see both opportunities and threats coming from IT legacy in current world. On one hand, effective legacy management can bring substantial hard savings and smooth transition to the desired future state. On the other hand, its mismanagement contributes to serious operational business risks, as old systems are not as reliable as it is required by the business users. This thesis offers one perspective of dealing with IT legacy – through effective contract management, as a component towards achieving Procurement Excellence in IT, thus bridging IT delivery departments, IT procurement, business units, and suppliers. It developed a model for assessing the impact of improvements on contract management process and set of tools and advices with regards to analysis and improvement actions. The thesis conducted case study to present and justify the implementation of Lean Six Sigma in IT legacy contract management environment. Lean Six Sigma proved to be successful and this thesis presents and discusses all the steps necessary, and pitfalls to avoid, to achieve breakthrough improvement in IT contract management process performance. For the IT legacy contract management process two improvements require special attention and can be easily copied to any organization. First is the issue of diluted contract ownership that stops all the improvements, as people do not know who is responsible for performing those actions. Second is the contract management performance evaluation tool, which can be used for monitoring, identifying outlying contracts and opportunities for improvements in the process. The study resulted in a valuable insight on the benefits of applying Lean Six Sigma to improve IT legacy contract management, as well as on how Lean Six Sigma can be applied in IT environment. Managerial implications are discussed. It is concluded that the use of data-driven Lean Six Sigma methodology for improving the existing IT contract management processes is a significant addition to the existing best practices in contract management.

Applying collective intelligence to idea evaluation at the front end of innovation

The study focuses on the front end of innovation process. Due to changes in innovation policies and paradigms customers, users and shopfloor employees are becoming increasingly important sources of knowledge. New methods are needed for processing information and ideas coming from multiple sources more effectively. The aim of this study is to develop an idea evaluation tool suitable for the front end of innovation process and capable of utilizing collective intelligence. The study is carried out as a case study research using constructive research approach. The chosen approach suits well for the purposes of the study. The constructive approach focuses on designing new constructs and testing them in real life applications. In this study a tool for evaluating ideas emerging from the course of everyday work is developed and tested in a case organization. Development of the tool is based on current scientific literature on knowledge creation, innovation management and collective intelligence and it is tested in LUT Lahti School of Innovation. Results are encouraging. The idea evaluation tool manages to improve performance at the front end of innovation process and it is accepted in use in the case organization. This study provides insights on what kind of a tool is required for facilitating collective intelligence at the front end of innovation process.

Web Presence Building and Performance Measuring in Business-to-Business Markets

Tutkimuksen tavoite oli selvittää yrityksen web toiminnan rakentamisen vaiheita sekä menestyksen mittaamista. Rakennusprosessia tutkittiin viisiportaisen askelmallin avulla. Mallin askeleet ovat; arviointi, strategian muotoilu, suunnitelma, pohjapiirros ja toteutus. Arviointi- ja toteutusvaiheiden täydentämiseksi sekä erityisesti myös internet toiminnan onnistumisen mittaamisen avuksi internet toiminnan hyödyt (CRM,kommunikointi-, myynti-, ja jakelukanava hyödyt markkinoinnin kannalta) käsiteltiin. Toiminnan menestyksen arvioinnin avuksi esiteltiin myös porrasmalli internet toimintaan. Porrasmalli määrittelee kauppakulissi-, dynaaminen-, transaktio- ja e-businessportaat. Tutkimuksessa löydettiin menestystekijöitä internet toimintojen menestykselle. Nämä tekijät ovat laadukas sisältö, kiinnostavuus, viihdyttävyys, informatiivisuus, ajankohtaisuus, personoitavuus, luottamus, interaktiivisuus, käytettävyys, kätevyys, lojaalisuus, suoriutuminen, responssiivisuus ja käyttäjätiedon kerääminen. Mittarit jaettiin tutkimuksessa aktiivisuus-, käyttäytymis- ja muunnosmittareihin. Lisäksi muita mittareita ja menestysindikaattoreita esiteltiin. Nämä menestyksen elementit ja mittarit koottiin yhteen uudessa internet toimintojen menestyksenarviointimallissa. Tutkielman empiirisessä osuudessa,esitettyjä teorioita peilattiin ABB:n (ABB:n sisällä erityisesti ABB Stotz-Kontakt) web toimintaan. Apuna olivat dokumenttianalyysi sekä haastattelut. Empiirinen osa havainnollisti teoriat käytännössä ja toi ilmi mahdollisuuden teorioiden laajentamiseen. Internet toimintojen rakentamismallia voidaan käyttää myös web toimintojen kehittämiseen ja porrasmalli sopii myös nykyisten internet toimintojen arvioimiseen. Mittareiden soveltaminen käytännössä toi kuitenkin ilmi tarpeen niiden kehittämiseen ja aiheen lisätutkimukseen. Niiden tulisi olla myös aiempaatiiviimmin liitetty kokonaisvaltaisen liiketoiminnan menestyksen mittaamiseen.

The Persistence of Finnish Equity Fund Performance

Tutkimuksen tavoitteena on selvittää, esiintyykö suomeen sijoittavilla osakerahastoilla menestyksen pysyvyyttä. Tutkimusaineisto koostuu kaikista suomalaisista osakerahastoista, jotka toimivat ajanjaksolla 15.1.1998-13.1.2005. Aineisto on vapaa selviytymisvinoumasta. Suorituskyvyn mittareina käytetään CAPM-alfaa sekä kolmi- ja nelifaktori-alfaa. Empiirisessä osassa osakerahastojen menestyksen pysyvyyttä testataan Spearmanin järjestyskorrelaatiotestillä. Evidenssi menestyksen pysyvyydestä jäi vähäiseksi, vaikkakin sitä esiintyi satunnaisesti kaikilla menestysmittareilla joillakin ranking- ja sijoitusperiodin yhdistelmillä. CAPM-alfalla tarkasteltuna tilastollisesti merkitsevää menestyksen pysyvyyttä esiintyi selvästi useammin kuin muilla menestysmittareilla. Tulokset tukevat viimeaikaisia kansainvälisiä tutkimuksia, joiden mukaan menestyksen pysyvyys riippuu usein mittaustavasta. Menestysmittareina käytettyjen regressiomallien merkitsevyystestit osoittavat multifaktorimallien selittävän osakerahastojen tuottoja CAPM:a paremmin. Lisätyt muuttujat parantavat merkittävästi CAPM:n selitysvoimaa.

Measuring the performance of corporate events : an empirical study of measuring practices in Finnish companies

Corporate events as an effective part of marketing communications strategy seem to be underestimated in Finnish companies. In the rest of the Europe and the USA, investments in events are increasing, and their share of the marketing budget is significant. The growth of the industry may be explained by the numerous advantages and opportunities that events provide for attendees, such as face-to-face marketing, enhancing corporate image, building relationships, increasing sales, and gathering information. In order to maximize these benefits and return on investment, specific measurement strategies are required, yet there seems to exist a lack of understanding of how event performance should be perceived or evaluated. To address this research gap, this research attempts to describe the perceptions of and strategies for evaluating corporate event performance in the Finnish events industry. First, corporate events are discussed in terms of definitions and characteristics, typologies, and their role in marketing communications. Second, different theories on evaluating corporate event performance are presented and analyzed. Third, a conceptual model is presented based on the literature review, which serves as a basis for the empirical research conducted as an online questionnaire. The empirical findings are to a great extent in line with the existing literature, suggesting that there remains a lack of understanding corporate event performance evaluation, and challenges arise in determining appropriate measurement procedures for it. Setting clear objectives for events is a significant aspect of the evaluation process, since the outcomes of events are usually evaluated against the preset objectives. The respondent companies utilize many of the individual techniques that were recognized in theory, such as calculating the number of sales leads and delegates. However, some of the measurement tools may require further investments and resources, thus restricting their application especially in smaller companies. In addition, there seems to be a lack of knowledge of the most appropriate methods in different contexts, which take into account the characteristics of the organizing party as well as the size and nature of the event. The lack of inhouse expertise enhances the need for third-party service-providers in solving problems of corporate event measurement.

GTK+ toolkit on mobile Linux devices

Linux -käyttöjärjestelmä on laajasti käytössä palvelin- ja työpöytätietokoneissa. Linux on lisäämässä suosiotaan kuitenkin myös sulautetuissa laitteissa, kuten PDA:issa, kännyköissä sekä erilaisissateollisuusjärjestelmissä. Näytön koko, suorituskyky ja käytettävyys asettavat omia erityisiä tarpeitaan laitteiden graafiselle käyttöliittymälle. Linux -käyttöjärjestelmälle on olemassa useita käyttöliittymäkirjastoja, joista GTK+ on yksi yleisimmin käytetyistä. Tämä diplomityö esittelee sulautetun Linux -käyttöjärjestelmän ja GTK+ käyttöliittymäkirjaston, selvittäen miten hyvin ne soveltuvat mobiileihin päätelaitteisiin. Yksi suurimmista esteistä työpöytäkäyttöön suunnattujen teknologioiden, kuten GTK+, muokkaamisessa mobiileihin päätelaitteisiin on suorituskyky. Osana tätä työtä kehitettiin GtkPerf -niminen työkalu, jolla GTK+:n suorituskykyä eri alustoilla pystytään helposti mittaamaan ja havaitsemaan mahdollisia pullonkauloja. Tämän työn johtopäätöksenä on, että pienillä muokkailuilla ja optimoinneilla GTK+ soveltuu myös mobiileihin päätelaitteisiin. Ensimmäinen kaupallisesti saatavilla oleva GTK+ -pohjainen päätelaite, Nokia 770 Internet Tablet, on tästä osoituksena.

Sähköisen hankintatoiminnan arviointi benchmarkingin avulla - tapaus IBM

Työn tavoitteena on ollut arvioida Oy International Business Machines Ab:n sähköistä hankintatoimintaa benchmarkingin avulla. Tutkimuksessa on selvitetty, miten IBM:n sähköinen hankintatoiminta on toteutettu kolmen muun yrityksen sähköisiin hankintatoimintoihin verrattuna. Lisäksi tarkoituksena on ollut löytää uusia mahdollisuuksia IBM:n sähköisten hankintatoimintojen kehittämiseksi. Työn teoriaosassa on käsitelty ensin hankintatoimintaa ja sen roolia toimitusketjussa, jonka jälkeen on tarkasteltu Internetin käyttöä hankintatoiminnoissa. Lisäksi on esitelty IBM:n sähköistä hankintatoimintaa sekä benchmarkingia toiminnan arvioinnin välineenä. Soveltavassa osassa on rakennettu benchmarking-prosessi, jonka avulla benchmarking-tutkimus suoritettiin. Tutkimusaineisto on kerätty benchmarking-vierailujen ja kirjallisuuslähteiden avulla. Benchmarking-tutkimuksen tulokset osoittivat, että kaikilla yrityksillä on kokemuksia sähköisien menetelmien käytöstä yritysten hankintatoiminnoissa ja ne on koettu hyödyllisiksi. Yritysten hankintatoiminnot perustuivat kuitenkin edelleen sekä perinteisiin toimintatapoihin että sähköisiin menetelmiin, mutta niiden kehittäminen täysin sähköisiksi oli yrityksille lähivuosien tärkeä tavoite. IBM:n hankintatoimintojen kehittämiseksi on esitetty useiden eri tekniikoiden käyttämistä sähköisen hankintatoiminnan toteuttamisessa. Kehitysmahdollisuutena on myös ehdotettu toimittajien verkkosivujen käyttämistä joidenkin tuotteiden hankkimisessa.