Self-Assessment Report for International Accreditation – Bachelor’s and Master’s degree programmes in Industrial Management

Self-assessment report for accreditation of the Bachelor's and Master's degree programs in Industrial Management.

State of Logistics and Operations Management in Finnish and Swedish Companies – Survey Research Findings

In this research we are examining what is the status of logistics and operations management in Finnish and Swedish companies. Empirical data is based on the web based questionnaire, which was completed in the end of 2007 and early 2008. Our examination consists of roughly 30 answers from largest manufacturing (highest representation in our sample), trade and logistics/distribution companies. Generally it could be argued that these companies operate in complex environment, where number of products, raw materials/components and suppliers is high. However, usually companies rely on small amount of suppliers per raw material/component (highest frequency is 2), and this was especially the case among Swedish companies, and among those companies, which favoured overseas sourcing. Sample consisted of companies which mostly are operating in an international environment, and are quite often multinationals. Our survey findings reveal that companies in general have taken logistics and information technology as part of their strategy process; utilization of performance measures as well as system implementations have followed the strategy decisions. In the transportation mode side we identify that road transports dominate all transport flow classes (inbound, internal and outbound), followed by sea and air. Surprisingly small amount of companies use railways, but in general we could argue that Swedish companies prefer this mode over Finnish counterparts. With respect of operations outsourcing, we found that more traditional areas of logistics outsourcing are driving factors in company's performance measurement priority. In contrary to previous research, our results indicate that the scope of outsourcing is not that wide in logistics/operations management area, and companies are not planning to outsource more in the near future. Some support is found for more international operations and increased outsourcing activity. From the increased time pressure of companies, we find evidence that local as well as overseas customers expect deliveries within days or weeks, but suppliers usually supply within weeks or months. So, basically this leads into considerable inventory holding. Interestingly local and overseas sourcing strategy does not have that great influence on lead time performance of these particular sourcing areas - local strategy is anyway considerably better in responding on market changes due to shorter supply lead times. In the end of our research work we have completed correlation analysis concerning items asked with Likert scale. Our analysis shows that seeing logistics more like a process rather than function, applying time based management, favouring partnerships and measuring logistics within different performance dimensions results on preferred features and performance found in logistics literature.

Ranking Regional Innovation Policies: DEA-based Benchmarking in an European Setting

Seudullinen innovaatio on monimutkainen ilmiö, joka usein sijaitsee paikallisten toimijoiden keskinäisen vuorovaikutuksen kentässä. Täten sitä on perinteisesti pidetty vaikeasti mitattavana ilmiönä. Työssä sovellettiin Data Envelopment Analysis menetelmää, joka on osoittautunut aiemmin menestyksekkääksi tapauksissa, joissa mitattavien syötteiden ja tuotteiden väliset suhteet eivät ole olleet ilmeisiä. Työssä luotiin konseptuaalinen malli seudullisen innovaation syötteistä ja tuotteista, jonka perusteella valittiin 12 tilastollisen muuttujan mittaristo. Käyttäen Eurostat:ia datalähteenä, lähdedata kahdeksaan muuttujsta saatiin seudullisella tasolla, sekä mittaristoa täydennettiin yhdellä kansallisella muuttujalla. Arviointi suoritettiin lopulta 45 eurooppalaiselle seudulle. Tutkimuksen painopiste oli arvioida DEA-menetelmän soveltuvuutta innovaatiojärjestelmän mittaamiseen, sillä menetelmää ei ole aiemmin sovellettu vastaavassa tapauksessa. Ensimmäiset tulokset osoittivat ylipäätään liiallisen korkeita tehokkuuslukuja. Korjaustoimenpiteitä erottelutarkkuuden parantamiseksi esiteltiin ja sovellettiin, jonka jälkeen saatiin realistisempia tuloksia ja ranking-lista arvioitavista seuduista. DEA-menetelmän todettiin olevan tehokas ja kiinnostava työkalu arviointikäytäntöjen ja innovaatiopolitiikan kehittämiseen, sikäli kun datan saatavuusongelmat saadaan ratkaistua sekä itse mallia tarkennettua.

Toimintolaskennan sovellettavuus koulutusorganisaation ohjauksessa Case: Päijät-Hämeen koulutuskonserni

Oppilaitoksiin kohdistuvaa lainsäädäntöä on muutettu siten, että omistajayhteisöjen vastuuta on huomattavasti lisätty. Tämän vuoksi oppilaitosten omistajayhteisöt joutuvat etsimään uusia keinoja toimintansa ohjaamiseksi. Tällöin tukeudutaan teollisuuden ohjausjärjestelmiin, joiden toimivuutta oppilaitosten ohjauksessa ei tunneta. Tämän työn tavoitteena on tutkia toimintolaskennan soveltuvuutta koulutusorganisaation ohjaukseen. Toimintolaskentaa käytetään nykyisin hyvin yleisesti teollisuudessa. Myös jotkut nonprofit-organisaatiot ovat ottaneet sen käyttöön. Tutkimus on kohdennettu Päijät-Hämeen koulutuskonserniin, jossa tutkittiin Opetushallituksen kustannuslaskentajärjestelmän sopivuutta toiminnan ohjaukseen. Tutkimuksen tuloksena voidaan todeta, että Opetushallituksen kustannuslaskentajärjestelmä voi olla toimintolaskentajärjestelmän pohjana, koska se kuvaa hyvin oppilaitosten toimintaa ja on helppo käyttää. Se soveltuu kohtuullisesti myös tasapainotetun mittariston osaksi.

User-driven community-based service development

This final thesis project was carried out in the Industrial Management department of University of Applied Sciences Stadia for Forum Virium Helsinki. The purpose of this study was to answer to the question of how companies can use online customer community of co-creation in service development and what is the value gained from it. The paper combines a range of recently published theoretical works and ongoing customer community case development. The study aims to provide new information and action approaches to new service developers that may increase the success of the community building process. The paper also outlines the benefits of the use of online customer community and offers practical suggestions for maximizing the value gained from the community in service development projects. The concepts and suggestions introduced in the study appear to have notable new possibilities to the service development process but they have to be further tested empirically. This paper describes the online consumer community of co-creation to an important organizational process of innovation management suggesting that it possesses a great value to business. Online customer communities offer a potential of improving the success of new services or products enabling early, penetrable market entry and creating sustainable competitive advantage.

Clustering and international competitiveness of information technology industry in the Saint Petersburg area

The main objective of this study is to assess the potential of the information technology industry in the Saint Petersburg area to become one of the new key industries in the Russian economy. To achieve this objective, the study analyzes especially the international competitiveness of the industry and the conditions for clustering. Russia is currently heavily dependent on its natural resources, which are the main source of its recent economic growth. In order to achieve good long-term economic performance, Russia needs diversification in its well-performing industries in addition to the ones operating in the field of natural resources. The Russian government has acknowledged this and started special initiatives to promote such other industries as information technology and nanotechnology. An interesting industry that is basically less than 20 years old and fast growing in Russia, is information technology. Information technology activities and markets are mainly concentrated in Russia’s two biggest cities, Moscow and Saint Petersburg, and areas around them. The information technology industry in the Saint Petersburg area, although smaller than Moscow, is especially dynamic and is gaining increasing foreign company presence. However, the industry is not yet internationally competitive as it lacks substantial and sustainable competitive advantages. The industry is also merely a potential global information technology cluster, as it lacks the competitive edge and a wide supplier and manufacturing base and other related parts of the whole information technology value system. Alone, the industry will not become a key industry in Russia, but it will, on the other hand, have an important supporting role for the development of other industries. The information technology market in the Saint Petersburg area is already large and if more tightly integrated to Moscow, they will together form a huge and still growing market sufficient for most companies operating in Russia currently and in the future. Therefore, the potential of information technology inside Russia is immense.

Productivity of Business Services - Towards A New Taxonomy

Statistics show that the expanding service sector accounts already for three quarters of GDP in the developed economies. Moreover, there is abundant evidence on high variation in productive performance across the service industries. This suggests divergent technological and institutional trajectories within the tertiary sector. While conceptual knowledge on services and their performance has accumulated substantially, the overall landscape on productivity and competitiveness is still inconclusive. As noted by number of authors the research on service productivity is still in its infancy. The purpose of this paper is to develop further the analytical framework of service productivity. The approach is based on the notion that service definitions, classifications and performance measurement are strongly interdependent. Given the ongoing restructuring of businesses activities with higher information content, it is argued that the dichotomy between manufacturing and services should not be taken too far. Industrial evolution also suggests that the official industry classifications are increasingly outdated and new taxonomies for empirical research are therefore needed. Based on the previous analyses and new insights the paper clarifies the debated concept of service productivity and identifies the critical dimensions by which the service industries cluster. It is also demonstrated that the dimensions enable to construct new service taxonomies which bear essentially on productivity opportunities at the business level. Needles to say the key determinant explaining the development and potential of productivity growth is innovation activity. As an extensive topic of research, however, service innovation is tackled here only in a cursory way. The paper is constructed as follows: the first section focuses on the conceptual issues and evolving nature of service activities. A workable definition of service should capture the diversity of service activities, as well as the aspects of service processes, comprehensively. The distinctions and similarities between services and manufacturing are discussed, too. Section 2 deals with the service productivity, a persistent and controversial issue in academic literature and policy. With the assessments of strengths and weaknesses of the main schools new insights based on value creation will be brought in. Industry classifications and taxonomies are discussed in Section 3. It begins with a short analysis of the official classifications and their evaluation from the perspective of empirical research. Using well-known examples it is shown that the taxonomies on the manufacturing industries have a clear analogy with the business services. As there is a growing interest to regroup services too, the work to date, has been less systematic and inherently qualitative. Based on the earlier contributions threedimensional service taxonomy is constructed which highlight the key dimensions of productive performance. The main findings and implications are summed up in Section 4.

Kansainvälistymisen verkostomalli

This paper is a Bachelor's degree thesis considering the network model of internationalization. The paper is presented in the program of Industrial Management and International Marketing at Lappeenranta University of Technology. Globalization has increased the importance of internationalization process in which firms create business in networks. The internationalization of firms and establishment of business networks are known to be interconnected. For example, networks may help a firm to penetrate into new markets. The objective in this thesis is to make a literature study to clarify what is meant by the network model of internationalization in academic discussion. How business networks are related to firm's internationalization, what are the reasons why the model was born and how the network theory differs from the earlier theory? Furthermore, we would like to know what are the possible advantages and disadvantages of internationalizing via networks for small and medium-sized enterprises.

Toimintaprosessin kehittäminen sairaalaympäristössä teollisuustalouden menetelmin

Työn tavoitteena on tutkia reaaliaikaisen sanelunpurun vaikuttavuutta ja kannattavuutta. Reaaliaikaisen sanelunpurun vaikuttavuuden tarkastelun pohjana käytetään teollisuustalouden puolella tunnettuja ja yrityksissä laajasti käytössä olevia ajatusmalleja, kuten Leania ja Six Sigmaa. Lean –ajattelu perustuu läpimenoajan nopeuttamiseen, hukkaa ja ei lisäarvoa luovien vaiheiden eliminoimisella. Six Sigma keskittyy taas laatuun, jolloin tuote ja palveluvirheitä karsitaan. Lisäksi teoriaosassa käsitellään palveluiden ulkoistamista, tietosuojaa ja palkkakustannusten rakennetta. Empiriaosassa kuvataan kirurgianpoliklinikan ja leikkausosaston prosesseja. Prosesseissa keskitytään nykytilan sekä reaaliaikaisen sanelunpurun vaikutuksiin. Prosessien kuvaamisella saadaan tietoa toiminnan ongelmista ja kehittämiskohteista. Henkilökunnan haastatteluin selvitettiin sanelujonon vaikutuksia sekä kokemuksia ulkoistamisesta. Kustannusanalyysin avulla selvitettiin ulkoistamisen kannattavuutta reaaliaikaisessa sanelunpurussa. Työn tuloksena saatiin vaikuttavuus tarkastelu reaaliaikaisesta sanelunpurusta sekä ulkoistamisen kannattavuudesta. Prosessien kuvaaminen osoittaa, että useissa prosessin eri vaiheissa sanelujen puuttuminen aiheuttaa kustannuksia ja vaikuttaa henkilökunnan työhön. Kustannusanalyysin pohjalta sanelunpurun ulkoistaminen todettiin kannattavaksi. Jatkossa sanelunpurun ulkoistamisessa tulee kiinnittää huomiota siihen, mitkä osat sanelunpurkuprosessista halutaan ulkoistaa. Sähköisten järjestelmien kehittyminen vaikuttaa osaltaan tähän päätökseen. Lisäksi suoritepohjaisen hinnoittelun kehittäminen on tärkeä osa sanelunpurkuprosessin tehokkuutta.

Tutkivan oppimisen ja ongelmalähtöisen oppimisen hyödyntäminen tuotantotalouden opetuksessa

Työn tavoitteena on esittää erilaisia mahdollisuuksia tutkivan oppimisen hyödyntämiseen tuotantotalouden koulutusohjelmassa. Työssä esitetään näiden opetusfilosofioiden perusperiaatteet. Lisäksi tutkitaan tutkivan oppimisen tuottamia hyötyjä koulutusohjelmalle, opiskelijoille ja tuleville työnantajille. Mukaan on otettu muissa yliopistossa hyödynnettyjä tapoja, mutta myös kehitetty erityisesti tuotantotalouden erityispiirteet huomioivia sovellettuja menetelmiä. Lisäksi tarkastellaan tuotantotalouden koulutusohjelmassa tuotettua ongelmalähtöiseen opiskeluun perustuvaa kurssia ”Toimitusketjun johtamisen teoriatyöpaja”. Työssä esitetään myös suunnitelma uusimuotoiselle, tutkivaan oppimiseen nojautuvalle ”Kandidaatintyö- ja seminaari” –kurssille. Kirjallisuuskatsauksessa perehdytään oppimisen ja muistin toiminnan perusteisiin. Tämän jälkeen esitellään näille periaatteille rakentuneiden tutkivan oppimisen ja ongelmalähtöisen oppimisen lähestymistavat ja menetelmät opetuksessa. Teorian pohjalta esitetään konkreettisia ideoita tutkivan oppimisen hyödyntämiseen opetuksessa. Tutkimuksen kahdesta case –tapauksesta ensimmäisessä esitetään, miten opiskelijat kokevat ongelmiin perustuvalla kurssilla opiskelun. Toinen case esittää, kuinka uusimuotoinen Kandidaatintyö- ja seminaari –kurssi on luotu ja miten se tukee taitoja, joita he tulevat tarvitsemaan myöhemmissä opinnoissaan ja työelämässä.

Reflexive model of research-based theatre – processing innovation at the crossroads of theatre, reflection and practice-based innovation activities

Contemporary organisations have to embrace the notion of doing ‘more with less’. This challenges knowledge production within companies and public organisations, forcing them to reorganise their structures and rethink what knowledge production actually means in the context of innovation and how knowledge is actually produced among various professional groups within the organisation in their everyday actions. Innovations are vital for organisational survival, and ‘ordinary’ employees and customers are central but too-often ignored producers of knowledge for contemporary organisations. Broader levels of participation and reflexive practices are needed. This dissertation discusses the missing links between innovation research conducted in the context of industrial management, arts, and culture; applied drama and theatre practices (specifically post-Boalian approaches); and learning – especially organising reflection – in organisational settings. This dissertation (1) explores and extends the role of research-based theatre to organising reflection and reflexive practices in the context of practice-based innovation, (2) develops a reflexive model of RBT for investigating and developing practice-based organisational process innovations in order to contribute to the development of a tool for innovation management and analysis, and (3) operationalises this model within private- and publicsector organisations. The proposed novel reflexive model of research-based theatre for investigating and developing practice-based organisational process innovations extends existing methods and offers a different way of organising reflection and reflexive practices in the context of general innovation management. The model was developed through five participatory action research processes conducted in four different organisations. The results provide learning steps – a reflection path – for understanding complex organisational life, people, and relations amid renewal and change actions. The proposed model provides a new approach to organising and cultivating reflexivity in practice-based innovation activities via research-based theatre. The results can be utilised as a guideline when processing practice-based innovation within private or public organisations. The model helps innovation managers to construct, together with their employees, temporary communities where they can learn together through reflecting on their own and each others’ experiences and to break down assumptions related to their own perspectives. The results include recommendations for practical development steps applicable in various organisations with regard to (i) application of research-based theatre and (ii) related general innovation management. The dissertation thus contributes to the development of novel learning approaches in knowledge production. Keywords: practice-based innovation, research-based theatre, learning, reflection, mode 2b knowledge production

Brand Identity and Image in B2B Factory Automation Context

The goal of this thesis is to study how a solution-oriented business-to-business company can utilize its brand as a strategic asset by using the concepts of brand identity and brand image. The study analyses the intended brand message (identity) contrasting it with the customer perceptions (image) to reveal points of parity and congruence. The study uses a case company as an example and discusses the benefits of brand management as well. Internally, brands can be studied by performing a set of interviews amongst top and middle management. The interviews need to consider the various elements of branding from associations to differentiation and value creation. Customers’ perceptions can be reliably studied via online survey designed to compare the intended brand message with customers’ experiences. From the perspective of industrial management the incentive for brand development lies in both monetary and managerial benefits. In literature the four essential benefits of B2B branding are risk dilution, efficiency of communications, strategic direction and price premiums. As a result, suggestive models for brand identity and image were devised and compared. The Case Company perceives itself as a technically oriented open-integrator, with a strong focus on reliability and customer service. Customers agree with the picture in general, but there are some points of parity as well: they are quite satisfied with the company and perceive it as reliable and providing the promised value. The problematic areas revolve around customer interaction and maintaining the leadership position. The results confirm previous findings in B2B branding theory, where the reliability and credibility of the supplier are in major role. The results also suggest a holistic, corporate approach on branding.