The Effectiveness of Currency Hedging Strategies. Case: Imatra Boards Business Unit of Stora Enso Corp.

Tutkimus tarkastelee vaihtoehtoisia termiinisuojaustrategioita metsäteollisuuden alan tulosyksikössä. Jälkitestauksen tarkoituksena on arvioida vaihtoehtoisten strategioiden tuloksellisuutta suojata case-yrityksen kassavirtoja seuraavan kolmen arviointikriteerin avulla: yksittäisten vieraan valuutan määräisten kassavirtojen vaihtelu; koko vieraan valuutan määräisen kassavirran vaihtelu; suojausvoitot ja -tappiot. Tutkimuksen teoreettinen viitekehys tarkastelee yrityksen päätöksentekoa, valuuttariskien suojausprosessia sekä esittelee yrityksen vaihtoehtoisia suojausstrategioita. Tutkimuksen empiirinen aineisto pohjautuu case- yrityksen historiallisiin myyntilukuihin ja on kerätty yrityksen tietojärjestelmästä. Muu tutkimuksessa käytetty dataon kerätty eri tietokannoista. Tutkimuksen tulokset osoittavat, että suojaaminen vähentää kassavirtojen vaihtelua. Suojaamisen taloudelliset tulokset ovat kuitenkin erittäin riippuvaisia valitusta suojausstrategiasta, joka voi johtaa merkittäviin suojausvoittoihin, mutta yhtä hyvin myos merkittäviin tappioihin. Johdon näkemykset ja riskitoleranssi määrittelevät mitä strategiaa yrityksessä tullaan viime kädessä noudattamaan.

Sähkönmyyntisopimusten markkinalähtöinen hinnoittelu

Vuonna 1995 alkanut sähkömarkkinoiden vapautuminen on muuttanut sähköyhtiöiden myyntisopimusten hinnoittelua merkittävästi. Ennen markkinauudistusta voitiin sähkön myyntisopimukset hinnoitella perustuen oman sähkön tuotannon kustannuksiin ja haluttuun katteeseen. Nykyään sähköpörssissä noteerattava sähkön hinta muodostaa perustan kaikkien myyntisopimusten hinnoittelulle. Sähkön markkinahinnan lisäksi on myyntisopimusten hinnoittelussa otettava huomioon sähkömarkkinoiden ominaispiirteistä aiheutuvat riskit sähkön myyjälle. Tässä työssä mallinnetaan Lappeenrannan Energia Oy:n markkinalähtöiset hinnoittelumenetelmät kahdelle sähkönmyyntisopimustyypille. Lisäksi tutkitaan markkinalähtöisen hinnoittelun tärkeimpien riskikomponenttien, aluehintaeron sekä profiililisän, merkitystä markkinalähtöisten myyntisopimusten hinnoittelussa. Aluehintaeron hyväksikäyttöä myyntisopimusten hinnoittelussa on tutkittu selvittämällä Suomen hinta-alueen CfD-johdannaisten riskipreemiot. Profiililisän merkitystä myyntisopimusten hinnoittelussa on tutkittu havainnoimalla profiililisän muutoksia hinta- ja kulutusaikasarjoissa sekä suojaushinta ja tehotasossa tapahtuneiden muutosten suhteen. Ennustetun ja toteutuneen profiililisän eroja on tutkittu laskemalla ne seitsemälle Lappeenrannan Energia Oy:n merkittävälle asiakkaalle. Lisäksi on tarkasteltu profiililisän laskentaan tarvittavan hinta-aikasarjan mallintamiseen käytettyjen termiinituotteiden hintojen merkitystä lasketun profiililisän suuruuteen. Työn lopuksi esitetään kaksi vaihtoehtoista sähkösopimusten hinnoittelumenetelmää ja vertaillaan esitettyjä hinnoittelumenetelmiä keskenään. Työssä havaitaan, että aluehintaerolta suojautumiseen käytettävien CfD-johdannaisten avulla olisi ollut mahdollista lisätä markkinalähtöisten myyntisopimusten tuottoa viimeisen kolmen vuoden aikana. Suoritettujen herkkyysanalyysien perusteella voidaan todeta, että toteutuneen ja ennustetun profiililisän erot johtuvat laskentaan käytettävien hinta- sekä kulutusaikasarjojen epätarkkuudesta. Lappeenrannan Energia Oy:n käyttämät profiililisät osoittautuivat ex-post -tarkastelussa liian suuriksi yhtä asiakasta lukuun ottamatta. Lisäksi tarjousaikana laskettujen profiililisien voidaan katsoa muuttuvan täysin samassa suhteessa hinta-aikasarjan mallintamiseen käytettyjen termiinituotteiden volatiliteettien kanssa. Esiteltyjen vaihtoehtoisten myyntisopimusten hinnoittelumenetelmien voidaan katsoa antavan varsin samanlaisia tuloksia kuin Lappeenrannan Energia Oy:n nykyinen hinnoittelumenetelmä. Saatuihin tuloksiin vaikuttavat kuitenkin painokertoimien estimointiin käytetyn vuoden volatiliteetti sekä profiililisän laskentamenetelmä

Contract manufacturing networks structure and supply chain management

The usual objectives that companies have for subcontracting are studied in this thesis. The case company’s objectives for contract manufacturing now and in the future are identified. The main objective of the thesis is to create a focused model for the structure and supply chain management in the contract manufacturing network. This model is made for case company’s certain profit center. The different possibilities and their advantages and disadvantages for the structure and supply chain management are examined trough a theoretical review of literature. The possibilities found are then examined from the case company’s point of view. The case company point of view is established based on the opinions of the case company’s representatives. The outcome of the thesis is that the star shaped structure with supply chain management centralized to case company would be the best choice for the case company to manage the contract manufacture network.

Comparing service contract prices of outsourcing partner

The main objective of this Master’s thesis is to find out which one of the two pricing models is the most cost-effective. In this thesis there are two companies that have made an outsourcing contract, in which they have a possibility to choose between two different pricing models. The first model is so called FTE (Full Time Employee) -based. The total cost will be based on the amount of outsourced person-workyears. The second pricing model is the transaction-based, in which the price will be formed according to the amount of transactions. Changing the pricing model from FTE-based to the transaction-based will also incur other costs. It is very important that these other costs are also taken into consideration, so that it is possible to determine the total costs of the pricing models. These other costs are direct costs, indirect costs and performance related costs of outsourcing. Activity based-costing (ABC) was used in order to find out the trues indirect costs of the outsourced processes. Performance related costs are related to quality, so Pareto-analysis was used to analyse the costs. Based on all of that, a framework for service related cost analysis was developed. Quality costs were almost impossible to quantify, so quality had to be taken into consideration in a qualitative way. Furthermore, considering only the indirect and direct costs in a quantitative way and quality costs in a qualitative way, it was possible to find a conditional solution for the research question.

Design and Analysis of Forward Error Control Coding and Signaling for Guaranteeing QoS in Wireless Broadcast Systems

Broadcasting systems are networks where the transmission is received by several terminals. Generally broadcast receivers are passive devices in the network, meaning that they do not interact with the transmitter. Providing a certain Quality of Service (QoS) for the receivers in heterogeneous reception environment with no feedback is not an easy task. Forward error control coding can be used for protection against transmission errors to enhance the QoS for broadcast services. For good performance in terrestrial wireless networks, diversity should be utilized. The diversity is utilized by application of interleaving together with the forward error correction codes. In this dissertation the design and analysis of forward error control and control signalling for providing QoS in wireless broadcasting systems are studied. Control signaling is used in broadcasting networks to give the receiver necessary information on how to connect to the network itself and how to receive the services that are being transmitted. Usually control signalling is considered to be transmitted through a dedicated path in the systems. Therefore, the relationship of the signaling and service data paths should be considered early in the design phase. Modeling and simulations are used in the case studies of this dissertation to study this relationship. This dissertation begins with a survey on the broadcasting environment and mechanisms for providing QoS therein. Then case studies present analysis and design of such mechanisms in real systems. The mechanisms for providing QoS considering signaling and service data paths and their relationship at the DVB-H link layer are analyzed as the first case study. In particular the performance of different service data decoding mechanisms and optimal signaling transmission parameter selection are presented. The second case study investigates the design of signaling and service data paths for the more modern DVB-T2 physical layer. Furthermore, by comparing the performances of the signaling and service data paths by simulations, configuration guidelines for the DVB-T2 physical layer signaling are given. The presented guidelines can prove useful when configuring DVB-T2 transmission networks. Finally, recommendations for the design of data and signalling paths are given based on findings from the case studies. The requirements for the signaling design should be derived from the requirements for the main services. Generally, these requirements for signaling should be more demanding as the signaling is the enabler for service reception.

Excelling in procurement : IT Contract Management with Lean and Six Sigma. Case study on legacy contract management at Philips Global IT.

Few people see both opportunities and threats coming from IT legacy in current world. On one hand, effective legacy management can bring substantial hard savings and smooth transition to the desired future state. On the other hand, its mismanagement contributes to serious operational business risks, as old systems are not as reliable as it is required by the business users. This thesis offers one perspective of dealing with IT legacy – through effective contract management, as a component towards achieving Procurement Excellence in IT, thus bridging IT delivery departments, IT procurement, business units, and suppliers. It developed a model for assessing the impact of improvements on contract management process and set of tools and advices with regards to analysis and improvement actions. The thesis conducted case study to present and justify the implementation of Lean Six Sigma in IT legacy contract management environment. Lean Six Sigma proved to be successful and this thesis presents and discusses all the steps necessary, and pitfalls to avoid, to achieve breakthrough improvement in IT contract management process performance. For the IT legacy contract management process two improvements require special attention and can be easily copied to any organization. First is the issue of diluted contract ownership that stops all the improvements, as people do not know who is responsible for performing those actions. Second is the contract management performance evaluation tool, which can be used for monitoring, identifying outlying contracts and opportunities for improvements in the process. The study resulted in a valuable insight on the benefits of applying Lean Six Sigma to improve IT legacy contract management, as well as on how Lean Six Sigma can be applied in IT environment. Managerial implications are discussed. It is concluded that the use of data-driven Lean Six Sigma methodology for improving the existing IT contract management processes is a significant addition to the existing best practices in contract management.

Service Productization and Product Servitization in The Contract Manufacturing Company

The role of contract manufacturing and subcontracting has been seen in black and white in product and service point of view. It used to be seen either as a product or a service. In the thesis product-service system, offering combining products and services, was discussed. Theory was created from two perspectives; Service productization via Business Model generation and product servitization via New Service Development process. Target for the case study was to point out new ways of service thinking and ways for changing business environment in contract manufacturing, especially in customer satisfaction and profitability point of view. The case study is following the New Service Development process phases. First ideas were collected from literature and via sales management interviews. Service offering and tool for service requirement evaluation was created. Last financial results of example service scenarios were calculated. It is recommended to take service offering into internal use and further develop it into modular service model. It is also recommended to take created customer service requirement evaluation tool into use for capturing customer service needs but also for communicating those internally.

Privity of Contract and Third Party Rights in European Construction Projects

Privity of contract has lately been criticized in several European jurisdictions, particu-larly due to the onerous consequences it gives rise to in arrangements typical for the modern exchange such as chains of contracts. Privity of contract is a classical premise of contract law, which prohibits a third party to acquire or enforce rights under a contract to which he is not a party. Such a premise is usually seen to be manifested in the doctrine of privity of contract developed under common law, however, the jurisdictions of continental Europe do recognize a corresponding starting point in contract law. One of the traditional industry sectors affected by this premise is the construction industry. A typical large construction project includes a contractual chain comprised of an employer, a main contractor and a subcontractor. The employer is usually dependent on the subcontractor's performance, however, no contractual nexus exists between the two. Accordingly, the employer might want to circumvent the privity of contract in order to reach the subcontractor and to mitigate any risks imposed by such a chain of contracts. From this starting point, the study endeavors to examine the concept of privity of con-tract in European jurisdictions and particularly the methods used to circumvent the rule in the construction industry practice. For this purpose, the study employs both a com-parative and a legal dogmatic method. The principal aim is to discover general principles not just from a theoretical perspective, but from a practical angle as well. Consequently, a considerable amount of legal praxis as well as international industry forms have been used as references. The most important include inter alia the model forms produced by FIDIC as well as Olli Norros' doctoral thesis "Vastuu sopimusketjussa". According to the conclusions of this study, the four principal ways to circumvent privity of contract in European construction projects include liability in a chain of contracts, collateral contracts, assignment of rights as well as security instruments. The contempo-rary European jurisdictions recognize these concepts and the references suggest that they are an integral part of the current market practice. Despite the fact that such means of circumventing privity of contract raise a number of legal questions and affect the risk position of particularly a subcontractor considerably, it seems that the impairment of the premise of privity of contract is an increasing trend in the construction industry.