Information exchange and disruption risk in multimodal maritime supply chains

Supply chains are becoming increasingly dependent on information ex-change in today’s world, and any disruption can cause severe repercus-sions to the flow of materials in the chain. The speed, accuracy and amount of information are key factors. The aim in this thesis is to address a gap in the research by focusing on information exchange and the risks related to it in a multimodal wood supply chain operating between the Baltic States and Finland. The study involved interviewing people engaged in logistics management in the supply chain in question. The main risk the interviewees identified arose from the sea logistics system, which held a lot of different kinds of information. The threat of breakdown in the Internet connection was also found to hinder the operations significantly. A vulnerability analysis was carried out in order to identify the main actors and channels of infor-mation flow in the supply chain. The analysis revealed that the most important and therefore most vulnerable information-exchange channels were those linking the terminal superintendent, the operative managers and the mill managers. The study gives a holistic picture of the investigated supply chain. Information-exchange-related risks varied greatly. One of the most frequently mentioned was the risk of information inaccuracy, which was usually due to the fact that those in charge of the various functions did not fully understand the consequences for the entire chain.

Supplier codes of conduct: Acting responsibly in global supply chains

Nowadays the Western companies are considered responsible for the social and environmental issues in their whole supply chains. To influence the practices of their suppliers the Western companies have created suppliers codes of conduct (SCCs) which express their requirements. Suppliers’ compliance with the SCCs is checked through audits. The purpose of this thesis is to analyze SCCs as a means for Western companies to ensure socially and environmentally responsible actions in their global supply chains, and the sub-objectives are to find out 1) how well do the SCCs and their auditing work at suppliers’ production sites and 2) how can possible problems related to SCCs and their auditing be solved. This is a qualitative research carried out in the form of a case study with two case companies. In this study both primary and secondary data is used. The primary data is collected in the form of interviews of the case company representatives and three external experts. Based on a theoretical framework of previous research in the fields of corporate social responsibility and supply chain management, a model with eleven factors, which influence the success of SCC implementation and the auditing of SCC –implementation, is drafted. Also several different best-practices to help to solve and avoid possible problems related to SCC -implementation and auditing have been identified from previous research. Based on the findings of this study the theoretical model has been updated adding two new influential factors. It seems that how well the SCC and its auditing work at suppliers’ production sites depends on the joint effect of thirteen influential factors: buyer’s purchasing policy, supplier’s motivation, buyer’s commitment, the solving of agency problems, the contents of the SCC, supplier’s role and the buyer-supplier –relationship, complexity of supply chain, the limitations of the smaller buyers, cooperation through a business association or multi-stakeholder system, the role of supplier’s employees, SCC –related communication and supplier’s understanding, cheating in audits and the auditors. The possible problems related to SCCs and their auditing can be solved by adopting best-practices. Nine of the theoretical best-practices stand out from the findings of this study: 1) two-way communication and collecting feedback from suppliers, 2) the philosophy of continuous improvement, 3) long-term business relationships with the supplier, 4) informing the supplier about the advantages of SCC –compliance, 5) rewarding code-compliant suppliers, 6) building collaborative, good buyer-supplier relationships, 7) supporting and advising the supplier, 8) joining a business association or multi-stakeholder system and 9) interviewing supplier’s employees as a part of the audits.

Value added logistics in supply and demand chains. Smile. Part 1. eBusiness between global company and itslocal sme supplier network

VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

Logging residues from regeneration fellings for biofuel production - a GIS-based availability and supply cost analysis

Finland has large forest fuel resources. However, the use of forest fuels for energy production has been low, except for small-scale use in heating. According to national action plans and programs related to wood energy promotion, the utilization of such resources will be multiplied over the next few years. The most significant part of this growth will be based on the utilization of forest fuels, produced from logging residues of regeneration fellings, in industrial and municipal power and heating plants. Availability of logging residues was analyzed by means of resource and demand approaches in order to identify the most suitable regions with focus on increasing the forest fuel usage. The analysis included availability and supply cost comparisons between power plant sites and resource allocation in a least cost manner, and between a predefined power plant structure under demand and supply constraints. Spatial analysis of worksite factors and regional geographies were carried out using the GIS-model environment via geoprocessing and cartographic modeling tools. According to the results of analyses, the cost competitiveness of forest fuel supply should be improved in order to achieve the designed objectives in the near future. Availability and supply costs of forest fuels varied spatially and were very sensitive to worksite factors and transport distances. According to the site-specific analysis the supply potential between differentlocations can be multifold. However, due to technical and economical reasons ofthe fuel supply and dense power plant infrastructure, the supply potential is limited at plant level. Therefore, the potential and supply cost calculations aredepending on site-specific matters, where regional characteristics of resourcesand infrastructure should be taken into consideration, for example by using a GIS-modeling approach constructed in this study.

Developing supply chain performance measurement metrics, case Halton Oy

Tämä tutkimus pyrkii selvittämään, miten toimitusketjun suorituskykyä voidaan mitata kohdeyrityksessä. Supply Chain Council (SCC) on vuonna 1996 kehittänyt Supply Chain Operations Reference (SCOR) – mallin, joka mahdollistaa myös suorituskyvyn mittaamisen. Tämän tutkimuksen tarkoituksena on soveltaa SCOR-mallin suorituskyvyn mittausmallia kohdeyrityksessä. Työ on kvalitatiivinen tapaustutkimus. Työn teoriaosassa on pääasiallisesti käsitelty toimitusketjua ja suorituskyvyn mittaamista koskevaa kirjallisuutta. Mittausjärjestelmän luominen alkaa kohdeyrityksen esittelyllä. SCOR – mallin mittarit on kohdeyrityksessä rakennettu SCC:n ehdotusten mukaisesti, jotta mittareiden tulokset olisivat käyttökelpoisia myös benchmarkkausta varten. Malli sisältää 10 SCOR – mittaria, sekä muutamia muita Haltonin omia mittareita. Lopputuloksena voidaan nähdä, että SCOR – malli antaa hyvän yleiskuvan toimitusketjun suorituskyvystä, mutta kohdeyrityksessä on silti tarvetta kehittää edelleen informatiivisempia mittareita, jotka antaisivat yksityiskohtaisempaa tietoa kohdeyrityksen johdolle.

Supply Risk Management in Pharmaceutical

Fast development in the operating environment and fierce competition have driven companies to pursue efficiency and success through lean and global supply chains. At the same time overall uncertainty has increased in the business environment and supply chains have become a priority in risk management since their vulnerability may endanger business continuity. Although risk management should start at procurement strategy development phase, proactive contingency planning is also essential because it enables correct reaction and fast changes in process execution in the case of risk realization. This thesis is a case study conducted in the pharmaceutical industry where purchasing and materials management organizations face a number of challenges and limitations that have to be considered in supply risk management. The goal of the study was to discuss the operating environment, and identify and analyze supply risks and potential risk management practices. The study was concluded with suggestions for purchasing strategy development that take risk management considerations into account. This copy is the public version of the thesis.

Strategic supply chain alignment to customer buying behavior

In search for competitive advantage, designing and managing supply chain networks have become a necessary competence for organizations. The target of this thesis is to answer a question, how to design a multiple supply chain network. The purpose is to study, what kind of different supply chain designs exist and, how to choose appropriate supply chain designs for a company. In the thesis, the focus is on the supply chain alignment to customers, more specifically to customer buying behavior. The research method was a case study. A framework for measuring customer buying behavior was developed based on the literature and it was used in the study of customer buying behavior in the case environment. In the case company structured interviews and data records were used as sources of evidence. Persons working in the customer-interface were interviewed face-to-face and through an e-mail questionnaire. When analyzing the data, a Quality function deployment matrix was used as one analysis method. As a result of the thesis, supply chain network of the case company is proposed to be divided into three separate supply chains, which focus on different areas and they could be called lean, agile and continuous replenishment supply chains. In conclusion, in the supply chain alignment to customer buying behavior several aspects have to be studied from different perspectives. According to the results, a multiple supply chain strategy is recommended to be implemented in the case company, since the diversity of the customer needs cannot be managed efficiently through a single supply chain.

Approaches to Supply Chain Risk Management: Identification, Analysis and Control

Supply chain risk management has emerged as an increasingly important issue in logistics as disruptions in the supply chain have become critical issues for many companies. The scientific literature on the subject is developing and in many respects the understanding of it is still in its infancy. Thus, there is a need for more information in order for scholars and practitioners to understand the causalities and interrelations that characterise the phenomenon. The aim of this dissertation is to narrow this gap by exploring key aspects of supply chain risk management through two maritime supply chains in the immediate region of the Gulf of Finland. The study contributes to the field in three different ways. Firstly, it facilitates the identification of risks on different levels of the supply chain through a systematic analysis of the processes and actors, and of the cognitive barriers that limit the actors’ visibility and their understanding of the operations and the risks involved. There is a clear need to increase collaboration and information exchange in order to improve visibility in the chain. Risk management should be a collaborative effort among the individual actors, aimed at obtaining a holistic picture. Secondly, the study contributes to the literature on risk analysis through the use of systemic frameworks that illustrate the causalities and linkages in the system, thereby making it easier to perceive the vulnerabilities. Thirdly, the study enhances current knowledge of risk control in identifying actor roles, risk visibility and risk controllability as being among the key factors determining risk-management effectiveness against supply-chain vulnerability. This dissertation is divided into two parts. The first part gives a general overview of the relevant literature, the research design and the conclusions of the study, and the second part comprises six research publications. Case-study methodology with systematic combining approach is used, where in-depth interviews, questionnaires and expert panel sessions are the main data collection methods. The study illustrates the current state of risk management in multimodal maritime supply chains, and develops frameworks for further analysis. The results imply that there are major differences between organizations in their ability to execute supply chain risk management. Further collaboration should be considered in order to facilitate the development of systematic and effective management processes.

Toimitusketjun hallinnan erityispiirteet elintarvikepakkausalalla: lainsäädännön ja keskeisten standardien rooli

Tutkimuksen tavoitteena on kuvata elintarvikepakkausalan keskeisen lainsäädännön ja laadunhallintastandardien vaikutusta elintarvikepakkausalan toimitusketjujen hallinnassa. Tutkielmassa sovelletaan kvalitatiivista analyysitapaa ja tutkimus aineistona on kirjallinen materiaali sekä teemahaastattelu.Tutkielman teoreettinen viitekehys rakentuu toimitusketjun hallinnan ympärille. Tutkielmassa kartoitetaan elintarvikepakkausvalmistajiin sovellettavan kontaktimateriaalilainsäädännön ja ISO 9001 laadunhallintastandardin keskeiset vaatimukset, ja tarkastellaan niiden roolia elintarvikepakkausalan toimitusketjun hallinnan välineenä. Tutkimuksen johtopäätöksenä voidaan todeta, että vaikka sekä kontaktimateriaalilainsäädäntö että vapaaehtoiset laadunhallintastandardit tukevat elintarvikepakkausalan toimitusketjujen hallintaa, on niiden vaikuttavuus ja toimitusketjun koordinaation ja integraation kehittäminen pitkälti riippuvainen siitä, kuinka sitoutuneita toimitusketjuun kuuluvat yritykset ovat kehittämään toimi-tusketjun liiketoimintaprosesseja ja johtamiskäytäntöjä.

Improving business processes in a globally dispersed make-to-order supply chain. Case study on outbound logistics in a Multinational Corporation

The purpose of this thesis is to find out how outbound logistics process can be improved by reducing unnecessary waste in a globally dispersed make-to-order (MTO) supply chain. The research problem was addressed by a multinational corporation that aims to find a solution for reducing unnecessary waste in their outbound logistics process. The focus is on customized products that are delivered via sea transportation. Theoretical framework for improving outbound logistics processes in globally dispersed MTO supply chain was created based on business process management, Porter’s value chain theory, value stream mapping and current reality tree. The empirical research was conducted by using constructive approach due to its ability to research a practical problem and to improve the existing practices. The data was collected from ten semi-structured interviews and three non-participant observations. By analysing the data and applying the theoretical framework, five types of waste were detected in the process that were seen to derive from six root causes. Practical solution was constructed to reduce the waste in the process by combining the existing literature with the ideas raising from empirical data. The results of this thesis suggest that a MNC with a globally dispersed MTO supply chain can improve its outbound logistics process by applying activities that enhance internal and external integration, collaboration and coordination, and increase predictability of the process. This research has practical relevance both for the case company as well as for other MNCs with globally dispersed MTO supply chains that aim to improve their outbound logistics processes. This research contributes to the BPM and CRA research by providing an evidence for their applicability in the new context.

Developing Supply Chain Process Management and Measurement in Global Manufacturing Company

The objective of this research is to create a current state analysis of pulp supply chain processes from production planning to deliveries to customers. A cross-functional flowchart is being used to model these processes. These models help finding key performance indicators (KPIs) which enable examinations of the supply chain efficiency. Supply chain measures in different processes reveal the changes need processes that affect the whole supply chain and its efficiency and competitiveness. Structure of pulp supply chain differs from most of the other supply chains. The fact that there are big volumes of bulk products, small product variations and supply forecasts are made for the year ahead make the difference. This factor brings different benefits but also challenges when developing supply chain. This thesis divides pulp supply chain in three different main categories: production planning, warehousing and transportation. It provides tools for estimating the functionality of supply chain as well as developing the efficiency for different functions of supply chain. By having a better understanding of supply chain processes and measurement the whole supply chain structure can be developed significantly.

Supply Chain Adaptation of Finnish Companies in Chinese Institutional Environment

Within the last few decades of operations and supply chain management, the field has seen the rise of so called best practices, methods that will help supply chains obtain their business goals and gain a competitive edge. These methods were thought to be universal. This however is not always the case, as the surrounding business environment could have a significant impact on what will be effective in gaining competitive edge. Contingency theory states that the success of a supply chain is determined by both internal capabilities, as well as external context aligning. This creates a strategic fit, which is a major determinant of success. In order for supply chains to reach this strategic fit, they must adapt. As China has seen rapid growth and over the last few decades become one of the major economies of the world, Western companies have tried to establish themselves there, only to find that the Chinese market is extremely difficult to operate in. The aim of this thesis was to investigate from contingency theory perspective, what are the institutional factors that affect supply chain management of Finnish companies operating in China, and how do Finnish companies adapt their supply chains to better fit the Chinese institutional environment. A theoretical model was created for this thesis, in which supply chains possess resources, which can be combined in a meaningful manner to create capabilities. Both resources and capabilities are affected by the surrounding institutional environment, which forces supply chains to adapt in order to find a better strategic fit. A total of six Finnish managers from three large and three small companies operating in China were interviewed. The results indicated that the Chinese business environment is significantly different, than that of Finland or Western countries in general. Three institutional factors were identified: Confucian though, fast-paced business environment, and managing labor force. These three institutional factors made the relationship and delivery capabilities particularly important, as well as human resources, reputation, physical resources and technological resources. In conclusion, it was discovered that the Chinese institutional environment is heavily affected by Confucian thought, as well as the rapid market growth. These are the two most important institutional factors that shape the Chinese market. If supply chains wish to be successful in China, adaptation regarding these two institutional factors should yield good results.