Suomalaisten jäte- ja jätevesialan yritysten yhteistyömahdollisuudet sekä uudet tuotekonseptit koti- ja ulkomaisen liiketoiminnan kehittämisessä

Diplomityö on tehty osana InnoEnvi-hanketta, joka on Etelä-Suomen ympäristöalan verkostoitumiseen ja tietoyhteiskunnan kehittymiseen tähtäävä toimintakokonaisuus. InnoEnvi on osa Etelä-Suomen maakuntien valmistelemaa InnoElli-ohjelmaa. InnoEnvi-hankkeen päätavoitteena on kehittyvän ympäristöklusterin luominen Etelä-Suomeen. Monet suomalaiset ympäristöalalle erikoistuneet yritykset ovat vielä tänä päivänä pieniä, nuoria ja pirstaleisia, minkä vuoksi ne tarvitsevat tukea ja yhteistyötä varsinkin vientimarkkinoille pyrkiessään. Tämän työn oleellisimpana tavoitteena oli kartoittaa Etelä-Suomen jäte- ja jätehuoltoalan yritysten yhteistyön mahdollisuuksia ja etuja, sekä yhteistyön tuomaa vaikutusta koti- ja ulkomaiseen liiketoimintaan. Tutkimusongelmaa lähestyttiin kartoittamalla Suomen tämänhetkistä jäte- ja jätevesihuollon tilaa ja käytössä olevaa teknologiaa sekä ympäristöliiketoimintaan vaikuttavia ohjauskeinoja. Ympäristöalan liiketoimintakenttään syvennyttiin tutkimalla alan verkostoitumista ja uusia verkostoitumisen mahdollisuuksia. Verkostoituneita yrityksiä ja yhteistyön lisätarvetta selvitettiin InnoEnvissä tehtyjen aiempien tutkimustulosten sekä tässä tutkimuksessa tehtyjen yrityshaastattelujen avulla. Uudet EU-maat panostavat tiukentuvien ympäristösäädösten takia ympäristönsuojeluun, mikä tekee niistä houkuttelevan ympäristöteknologian vientikohteen. Tässä työssä valittiin tutkimuksen kohteiksi Latvia ja Puola, joiden ympäristöteknologian tasoa ja kehitystarpeita selvitettiin vientipotentiaalin hahmottamiseksi. Molempien maiden jätevesi- ja varsinkin jätehuollossa on paljon kehitettävää, ja maissa panostetaankin kehitystoimiin monin erilaisin valtiollisin ohjelmin. Kotimaisen ympäristöliiketoiminnan kehittämiseksi työssä käsiteltiin neljää tuote- ja palvelukonseptia, jotka valittiin InnoEnvi-hankkeessa tehdystä ajankohtaisesta ympäristöalan investointihankekartoituksesta. Valitut konseptit ovat: REF-valmistuslaitos, jätevesilietteen käsittelylaitteisto, pilaantuneiden maiden käsittelytoimet sekä kaatopaikan lopettaminen. Tuotekonseptit jaettiin osatuotteisiin ja –palveluihin, joita verkostoituneet yritykset voisivat yhdessä tuottaa. Työkaluiksi yritysten kontakteihin nähtiin InnoEnvi-hankkeessa muodostetut miniklusterit ja niiden sisällä kehittyvä toiminta sekä hankkeessa rakennettu www-pohjainen Matching-palvelu. Tutkimuksessa löydettiin uusia mahdollisuuksia yhteistyötoiminnalle. Verkostoitumisessa nähdään haastattelujen mukaan monia etuja: tiedonsaanti, taloudelliset edut, toiminnan luotettavuus sekä uudet virikkeet markkinointiin ja tuotekehitykseen. Lisäyhteistyökumppaneille on haastattelujen mukaan tarvetta. Verkostoituminen tuo vientitoimintaa aloitteleville pk-sektorin yrityksille mahdollisuuden saavuttaa kansainvälistymiseen tarvittavia resursseja. Niin koti- kuin ulkomaisessakin liiketoiminnassa verkoston tärkeimmäksi tekijäksi osoittautui veturiyritys, joka voi vastata verkostossa muun muassa markkinoinnista ja tuotekehityksestä Vientitoiminnassa kohdemaan lainsäädännön ja yleisien toimintatapojen tunteminen on tärkeää. Paikalliset kohdemaan suunnittelu- ja urakointiyritykset ovat tärkeitä yhteistyökumppaneita vientihankkeessa. Latviassa jätehuoltoteknologian kehittämisen tarve on niin yhdyskunta-, ongelma- kuin teollisuusjätteidenkin osalta merkittävä. Puolassa jätesektorin ajankohtaisia aiheita ovat muun muassa kaatopaikkojen vähentäminen ja pakkausjätteen käsittely. Molempien esimerkkimaiden kohdalla jätevesihuollossa tullaan keskittymään lietteiden käsittelyn vaatimiin teknologian tarpeisiin. Vientiosiossa tehtiin vientiyhteistyöesimerkki, jossa tutkittiin kuvitteellista rakennusjätteen käsittelylaitoksen toimittamisprojektia Puolaan. Esimerkkiin saatiin tietoja InnoEnvissä tehdystä Puolan markkinatutkimuksesta. Tulokseksi saatiin viitteitä mahdollisista suomalaisista laitetoimittajista, viisi potentiaalista puolalaista suunnitteluyritystä sekä viisi puolalaista urakoitsijaa. On tärkeää, että kotimaisella yritysryppäällä on kokemusta sujuvasta yhteistyöstä ennen vientiprojektin toteuttamista. Tuotekonseptiesimerkkeihin kartoitettiin pääosa eteläsuomalaisista tuotteiden ja palvelujen tarjoajista. Tarkasteluun otettiin mukaan myös yrityksiä, joiden tuotteet tai palvelut olivat lähellä käsiteltyä konseptia. Tehtyjen yrityslistojen avulla on tarkoitus antaa virikkeitä uusien yritysryppäiden muodostamisesta sekä uusista tuote- ja palveluideoista, joille on nähtävissä markkinapotentiaalia. InnoEnvi-hankkeessa valmisteltujen työkalujen avulla eteläsuomalaiset yhteistyöstä kiinnostuneet yritykset voivat luoda kontakteja ja kokoontua miettimään tulevien investointihankkeiden toteuttamista kotimaassa ja myöhemmin jopa ulkomailla. Työn tuloksia esitellään InnoEnvi-hankkeen toimijoiden kautta jäteminiklusterissa toimiville eteläsuomalaisille yrityksille.

Offering planning with support of roadmapping in project business

Tämän tutkielman tavoitteena on tutkia kuinka roadmapping-tekniikkaa voidaan käyttää tarjonnan suunnittelun tukena uusien tuotteiden valmistamisen yhteydessä. Työ koostuu teoreettisesta ja käytännönläheisestä osasta. Teoreettinen runko on luotu selventämään kuinka tämän hetkisen tutkimus- ja kehitys projektit lopulta muodostavat tulevaisuuden tarjoaman. Menestyksekkään tuotetarjoaman luominen vaatii, sekä uusien teknologioiden kehittämistä, että markkinoilla olevien asiakkaiden tarpeiden ymmärtämistä. Asiakassuuntaisten tuotteiden kehittäminen vaatii toimintaympäristöstä ja asiakasrajapinnasta tulevien signaalien tunnistamista ja niiden ohjaamista tuote- ja teknologia platformeille. Strategia luodaan tukemaan päätöksentekoa prosessin eri vaiheissa. Yrityskohtainen osio koostuu analyysistä, joka on tehty teetetyn kyselyn ja haas-tattelujen pohjalta. Osana analyysia ovat Major project-yksikön tämänhetkinen tarjonnansuunnitteluprosessi, strategian soveltaminen, informaation kerääminen ja priorisointi, portfolionhallinta ja roadmap-tekniikan käyttö. Ratkaisussa on esitet-ty tarjonnan suunnitteluprosessi ja siihen liittyvät kriittiset komponentit. Roadmapping-tekniikkaaon luotu yhdistämään toimintaympäristö, tuotteet ja teknologia toisiinsa. Toimintaympäristö ja tuotteet on yhdistetty myös linked-grids-tekniikan avulla.

Organisaation innovatiivisuutta edistävät ja estävät tekijät. Case Technology Business Research Center

Tämän työn toimeksiantajaorganisaatio oli Lappeenrannan teknillisen yliopiston alainen, kauppatieteitä, teknologiaa ja tuotantotaloutta työssään yhdistävä tutkimusyksikkö, Technology Business Research Center, TBRC. Erään innovatiivisuustutkimusprojektin (InnoSpring) yhteydessä haluttiin selvittää myös oman tutkimusyksikön innovatiivisuuteen vaikuttavia, edistäviä ja estäviä tekijöitä. Tutkielman tavoitteena oli kartoittaa niitä seikkoja, jotka organisaation - tässä tapauksessa yliopiston tutkimusyksikön - henkilökunnan, projektityöntekijöiden, projektipäälliköiden sekä johdon mukaan vaikuttavat yksikön kykyyn luoda ja omaksua uutta, sen innovatiivisuuteen. Työ toteutettiin focus group-ryhmähaastattelumenetelmällä (kvalitatiivinen tutkimus), joihin osallistuivat omina ryhminään työntekijätaso, projektipäälliköt sekä johto.Haastattelut äänitettiin, litteroitiin ja koodattiin Atlas-Ti-ohjelmistolla. Loppuraportti verkostokuvineen luovutettiin tutkimuslaitokselle heinäkuussa 2005. Ryhmäkeskustelun teemoista ja kysymysten muodosta johtuen tulokset käsittelivät niin tutkimusyksikön nykyistä tilaa kuin eräänlaista "toivetilaa", millainen olisi ihanteellinen ja innovatiivinen työpaikka. Merkillepantavaa oli, että työssä tuli systemaattisesti esiin enemmän innovatiivisuutta edistäviä kuin ehkäiseviä seikkoja - vaikka osa edistävistä seikoista koskikin nimenomaan "toivetilaa". Keskustelluimpia teemoja olivat johtajuus,tavoitteellisuus ja strategian, yhteisen suunnan tarve. Samoin olemassa olevienprosessien kehittäminen, osaamisen (niin oman kuin koko organisaationkin) kokoaminen ja kehittäminen edelleen sekä tulosten jalkauttaminen.

On the innovation capacity of technologyrelated knowledge-intensive business services. A case study of the technology and engineering consulting (TEC) sector in Singapore

Even though the research on innovation in services has expanded remarkably especially during the past two decades, there is still a need to increase understanding on the special characteristics of service innovation. In addition to studying innovation in service companies and industries, research has also recently focused more on services in innovation, as especially the significance of so-called knowledge intensive business services (KIBS) for the competitive edge of their clients, othercompanies, regions and even nations has been proved in several previous studies. This study focuses on studying technology-based KIBS firms, and technology andengineering consulting (TEC) sector in particular. These firms have multiple roles in innovation systems, and thus, there is also a need for in-depth studies that increase knowledge about the types and dimensions of service innovations as well as underlying mechanisms and procedures which make the innovations successful. The main aim of this study is to generate new knowledge in the fragmented research field of service innovation management by recognizing the different typesof innovations in TEC services and some of the enablers of and barriers to innovation capacity in the field, especially from the knowledge management perspective. The study also aims to shed light on some of the existing routines and new constructions needed for enhancing service innovation and knowledge processing activities in KIBS companies of the TEC sector. The main samples of data in this research include literature reviews and public data sources, and a qualitative research approach with exploratory case studies conducted with the help of the interviews at technology consulting companies in Singapore in 2006. These complement the qualitative interview data gathered previously in Finland during a larger research project in the years 2004-2005. The data is also supplemented by a survey conducted in Singapore. The respondents for the survey by Tan (2007) were technology consulting companies who operate in the Singapore region. The purpose ofthe quantitative part of the study was to validate and further examine specificaspects such as the influence of knowledge management activities on innovativeness and different types of service innovations, in which the technology consultancies are involved. Singapore is known as a South-east Asian knowledge hub and is thus a significant research area where several multinational knowledge-intensive service firms operate. Typically, the service innovations identified in the studied TEC firms were formed by several dimensions of innovations. In addition to technological aspects, innovations were, for instance, related to new client interfaces and service delivery processes. The main enablers of and barriers to innovation seem to be partly similar in Singaporean firms as compared to the earlier study of Finnish TEC firms. Empirical studies also brought forth the significance of various sources of knowledge and knowledge processing activities as themain driving forces of service innovation in technology-related KIBS firms. A framework was also developed to study the effect of knowledge processing capabilities as well as some moderators on the innovativeness of TEC firms. Especially efficient knowledge acquisition and environmental dynamism seem to influence the innovativeness of TEC firms positively. The results of the study also contributeto the present service innovation literature by focusing more on 'innovation within KIBs' rather than 'innovation through KIBS', which has been the typical viewpoint stressed in the previous literature. Additionally, the study provides several possibilities for further research.

Environmental requirements and environmental management system of boiler plant supplier

Työn tärkeimpänä tavoitteena oli edistää ympäristöjärjestelmän laatimista Kvaerner Pulping, Power divisioonan Kattilat-liiketoimintayksikölle. Lisäksi tavoitteena oli tarkastella yritykseen kohdistuvia ympäristövaatimuksia ja niiden vaikutusta yrityksen toimintaan. Aluksi työssä tarkasteltiin ympäristöjärjestelmästandardien sisältöjä ja niiden eroja. Työssä käsiteltiin myös erilaisia elinkaarijohtamisen malleja, joita voidaan hyödyntää yrityksen kokonaisvaltaisessa ympäristöjärjestelmässä. Työssä tarkasteltiin myös sidosryhmien vaikutusta yrityksen ympäristötoimintaan. Kattilalaitostoimittajan tärkeimpiä asiakkaita ovat sellu- ja paperiteollisuus. Näihin yrityksiin on kohdistunut runsaan kymmenen vuoden aikana paineita ympäristötoiminnan tehostamiseksi. Tämän kehityksen seurauksena vastaavat tehostamispaineet ovat siirtymässä myös alihankkijoille, kuten kattilaitostoimittajille. Tehokkaan ympäristöjohtamisen takaamiseksi työssä määriteltiin ympäristövastuut ja –valtuudet sekä ympäristöpäämäärät ja –tavoitteet. Lisäksi tunnistettiin yrityksen toimintaan liittyvät ympäristönäkökohdat ja –riskit. Työn yhteydessä laadittiin ympäristöjärjestelmän luonnos, ja se sisältää jatkuvan parantamisen periaatteen. Työn yhteydessä laadittiin lisäksi Kvaerner Pulping Oy:n koelaitokselle ympäristölupahakemus. Työssä on kuvattu koelaitosta ja sen ympäristölupahakemukseen liittyviä asioita esimerkkinä parantuneesta ympäristöasioiden hoidosta.

Emission Trading and Tradable Green Certificates Impacts on the Business Activity of Vattenfall Oy

Ihmisen toiminnan vaikutus ilmakehään johtaa todennäköisesti ilmastonmuutoksiin. Eräs näistä muutoksista on maapallon keskilämpötilan nousu, joka aiheutuu kasvihuonekaasujen lisääntyneestä pitoisuudesta ilmakehässä. Vaikutusten vähentämiseksi on hiilidioksidipäästöjä vähennettävä. Kioton pöytäkirja asettaa allekirjoittaneille maille päästövelvoitteet. Euroopan unionin tulee vähentää kasvihuonekaasupäästöjään 8%:lla. Eräs vähennysmekanismeista on päästökauppa. Päästökauppa on sekä keino suojella ympäristöä että ympäristöpoliittinen instrumentti kasvihuonekaasupäästövähennysten kustannusten keventämiseksi. Päästökauppa ei suoranaisesti vähennä kasvihuonekaasupäästöjä, vaan tasaa niitä maiden ja laitosten välillä. Uusiutuvan energian käytön edistäminen sekä kansainvälisesti että kansallisesti johtaa suoriin kasvihuonekaasupäästöjen vähenemiseen. Euroopan unionin jäsenvaltiot ovat asettaneet kansalliset viitearvot uusituvan sähkön kulutukselle. Saavuttaakseen nämä viitearvot maiden tulee tukea uusiutuvia energialähteitä eri menetelmin kuten vihreillä sertifikaateilla. Päästökauppa ja kaupattavat vihreät sertifikaatit tulevat vaikuttamaan energiantuottajien liiketoimintaan. Työssä on tutkittu päästökaupan ja vihreiden sertifikaattien vaikutuksia Vattenfall Kaukolämpö Oy:n, Vattenfall Sähköntuotanto Oy:n ja Vamy Oy:n liiketoimintaan.

Change of Electricity Distribution Industry: Drivers and Opening Business Opportunities

As a result of the recent regulatory amendments and other development trends in the electricity distribution business, the sector is currently witnessing radical restructuring that will eventually impact the business logics of the sector. This report represents upcoming changes in the electricity distribution industry and concentrates on the factors that are expected to be the most fundamental ones. Electricity network companies nowadays struggle with legislative and regulatory requirements that focus on both the operational efficiency and the reliability of electricity distribution networks. The forces that have an impact on the distribution network companies can be put into three main categories that define the transformation at a general level. Those are: (1) a requirement for a more functional marketplace for energy, (2) environmental aspects (combating climate change etc.), and (3) a strongly emphasized requirement for the security of energy supply. The first point arises from the legislators’ attempt to increase competition in electricity retail markets, the second one concerns both environmental protection and human safety issues, and the third one indicates societies’ reduced willingness to accept interruptions in electricity supply. In the future, regulation of electricity distribution business may lower the threshold for building more weather-resistant networks, which in turn means increased underground cabling. This development pattern is reinforced by tightening safety and environmental regulations that ultimately make the overhead lines expensive to build and maintain. The changes will require new approaches particularly in network planning, construction, and maintenance. The concept for planning, constructing, and maintaining cable networks is necessary because the interdependencies between network operations are strong, in other words, the nature of the operation requires a linkage to other operations.

The Process of Greening Cycle as Method of Operative Environmental

The structural change of society from product-based business to service- and further to need-based business has caused the fact that work for environmental issues has spread from conventional factories and environmentally harmful production to concern services and offices as well. Almost every company has an office, so a relatively small environmental burden caused by an individual office grows remarkable already at the state level and globally even more. Motivation to work for environmental issues in an individual office could be challenging even without the fact that wasted environmental impacts bound also wasted costs. Besides cost savings, a concretely greener image of a company has its value in the B2Cas well as in the B2B-field. Consumers and clients are more and more conscious of environmental issues and demand concrete actions instead of speeches, good thoughts and meaningless certifications. Internal work for environmental issues at a strategy level is not sufficient, so operational environmental management is needed for changing old practices. This research is about the effects of operative environmental management on the greening process of an office-based business. The research is outlined to concern the operative work in the office including field sales. Target was to concretely lower the environmental impacts of Lyreco Finland and to find cost savings directly by changing the operative practices in the office and also indirectly by affecting the level of environmental knowledge of the personnel. During the greening process, the aim was also to create concrete arguments for marketing as well. The circle of greening process, which was especially created for this diploma work, was used as a method. The circle divides a year to themes and sections separated by factors of environmental impacts. Separation is based on Brett Wills’ thoughts of seven green wastes (Wills, Brett. The Green Intensions. 2009) and follows it uneasily. The circle aimed at ensuring evolutionary growth of knowledge instead of being revolutionary in the changing process. Committing personnel to the process from its start by asking ideas from them and giving them clear directions was an important part of the research of operative management. Because of working from distance, communication with personnel was operated by frequent training days and weekly greening notes via emails and intranet. Also availability for communication was an important task because of the telecommuting. Research results of this work show that operative environmental management in an officebased business today is mostly management of change. When the strategic environmental friendliness is taken into a concrete level, the most important individual factor is motivating the operating personnel. Research shows that evolutionary change is found being an efficient way to make a change. Also understanding one´s own impact on the environmental burden and on the whole greening process clearly motivates the personnel. Results show that in the operative realization of the greening process, clear directions of new working practices, being as concrete as possible, and committing personnel to follow them make the process more effective. The operative environmental management and the cycle of the greening process decrease the environmental burden and save costs. The concrete results could be used as believable arguments in marketing and therefore exploited in communication with interest groups. Commitment of the management is also one of the key factors of success in the greening process. In this research, changes in the business field by a company trade took the focus of the management away from the greening process and made the process more inefficient by decreasing the amount of training days. The circle of greening process will be used as a tool in the future, as well, and therefore it will help observe environmental impacts of a company and increase sustainable development. Commitment of management to the evolutionary environmental work helps the operating personnel lower environmental impacts, decrease costs and build a concretely greener image.

Solution Business Model for Energy Efficiency

This study examined solution business models and how they could be applied into energy efficiency business. The target of this study was to find out, what a functional solution business model applied to energy efficiency improvement projects is like. The term “functionality” was used to refer not only to the economic viability but to environmental and legal aspects and also to the implement of Critical Success Factors (CSFs) and the ability to overcome the most important market barriers and risks. This thesis is based on a comprehensive literature study on solution business, business models and energy efficiency business. This literature review was used as a foundation to an energy efficiency solution business model scheme. The created scheme was tested in a case study which studied two different energy efficiency improvement projects, illustrated the functionality of the created business model and evaluated their potential as customer targets. Solution approach was found to be suitable for energy efficiency business. The most important characteristics of a good solution business model were identified to be the relationship between the supplier and customer, a proper network, knowledge on the customer’s process and supreme technological expertise. Thus the energy efficiency solution business was recognized to be particularly suitable for example for energy suppliers or technological equipment suppliers. Because the case study was not executed from a certain company’s point of view, the most important factors such as relationships and the availability of funding could not be evaluated. Although the energy efficiency business is recognized to be economically viable, the most important factors influencing the profitability and the success of energy efficiency solution business model were identified to be the proper risk management, the ability to overcome market barriers and the realization of CSFs.

DIGITAL BUSINESS-TO-BUSINESS MARKETING COMMUNICATIONS IN EMERGING MARKETS – Developing Business Marketing in Russia

The core idea of this Master's Thesis was that five key characteristics – market heterogeneity, sociopolitical governance, chronic shortage of resources, unbranded competition, and inadequate infrastructure – of emerging markets are radically different from the traditional industrialized capitalist society and they will require us to rethink the core assumptions of business-to-business marketing, such as business relationships, marketing communication elements, and digitalization. In this research, Russia is considered to be an emerging market that reflects the aforementioned theoretical characteristics. The research was a qualitative case study and furthermore a collective case study. In the beginning three digital marketing professionals were interviewed to better understand digital B2B marketing. The actual research data was collected through seven structured theme interviews with representatives of the case companies operating in Russia. The selection of case companies included three business consulting companies and four industrial companies. The aim of this qualitative study was to understand and clarify how business marketing exploits digital marketing methods as a part of the chosen business marketing strategy under emerging markets’ special conditions. This objective was divided in three research questions: 1) How the chosen marketing strategy reflects in the business marketing process? 2) How digital marketing communication contributes to business marketing? 3) How are the emerging markets’ characteristics reflected in the business marketing process? The main research findings indicate that digital business-to-business marketing communications can be useful and effective. Moreover, business DMC can be defined and structured in a reasonable way. The company's prevalent marketing paradigm and the chosen marketing strategy reflect in the business marketing process, and in utilizing digital marketing communications. The assumption that emerging markets set an environment with special characteristics for business marketing was supported by the study. However, the business environmental aspects were not considerably disturbing digital B2B marketing, but making it even more reasonable to harness in Russia.

An Overview of the Cleantech Sector - Evaluating Environmental Indicators

The purpose of the thesis is to give an overview of the cleantech sector and to give an answer how cleantech companies can evaluate the environmental sustainability of their business by utilizing various indicators and measures. The thesis is a literature study and it is based on a secondary data. Thesis presents the definitions to cleantech as well as its history and the main industries. Cleantech market overview in Finland and worldwide is also introduced. Furthermore, various indicators are presented in order to evaluate the environmental sustainability of companies' business. In the end, indicators used in cleantech sector are evaluated. As a result, the thesis presents the following methodologies that can be used in evaluating the environmental sustainability in the cleantech sector: Sustainability assessment framework, Environmental value analysis, COMPLIMENT - Environmental performance index for industries and Environmental assessment for cleaner production. More tools are still needed to evaluate environmental sustainability in the cleantech sector.

Harmonization of Environmental Costs and Investments Reporting

The objective of this Master’s Thesis is to examine the current state of environmental costs and investments reporting at Stora Enso in the Business Area of Printing and Reading. Differences and the factors causing the differences in environmental costs and investments reporting are examined in order to further harmonize the reporting between the mills. Research method is a case study, which comprises 11 paper mills. Environmental costs are studied from year 2012 and environmental investments from year 2011 or from 2012 depending on the mill. The results show that there are two types of differences such as actual and harmonisable affecting to environmental costs reporting. Actual differences result from factors such as location and technical features of the mill. Harmonisable differences represent differences, which distort the actual differences. Factors that cause harmonisable differences are identification and traceability of environmental costs as well as interpretation of the instructions. Estimation of the environmental share of indirect environmental investments causes differences between the mills in environmental investments reporting, as it has to be done case-by-case judgments. A further research could consider a detailed examination of the data registering process in order to further improve traceability of environmental costs. Furthermore, identification and reporting of potential savings could be studied from environmental point of view as resource efficiency is an increasing interest.

Integrating corporate social responsibility into business in Finnish consumer goods companies

The motives for this study originated from the notion that surprisingly little academic literature is found on actually managing and putting corporate social responsibility (CSR) into practice, in comparison with the definitions and frameworks of the concept itself. Regardless of the author, CSR has been considered consisting of three dimensions: economic, social and environmental. The question behind the three dimensions has always been whether socially and environmentally responsible behavior can lead to increased economic performance and improve the competitiveness of a company. Most of the current CSR development has related to the quantification of environmental and social performance in order to review these along with the established financial key ratios, which are based on the law and the reporting obligation of the companies. However, the previous research has mainly focused on US companies whereas studies with a European viewpoint, let alone Nordic, have been mostly lacking. Furthermore, it has been discovered recently that the integration of corporate responsibility into business is identified as the greatest challenge in CSR management in Finnish large companies. Therefore the integration of CSR into business in Finnish consumer goods companies provided an interesting, topical and somewhat obscure purpose for this study. This was further divided into three research questions concerning the reasons for CSR engagement, the role of the stakeholders and the practice of corporate responsibility. This study did not aim to build a new theory; instead an explorative viewpoint was regarded more appropriate. Accordingly, qualitative research approach and case study design were adopted in the study. Semi-structured theme interviews were used as a primary data collection method and complemented with secondary data such as websites, responsibility reports and another recent CSR study. There were four Finnish managers as interviewees of whom three presented companies and one non-profit organization. The results were somewhat convergent but differences arose as a result of the companies being at different stages as regards corporate responsibility. However, this provided only more insight into the implementation of CSR. The voluntary CSR initiatives, responsibility reporting, stakeholders and CSR management were identified as the most important viewpoints on the practical side of CSR, besides a key requirement for the integration of CSR into business to be credible was found to be a favorable management attitude. Based on the findings of this study it was admitted that giving concrete advice on CSR management is really a challenge and there is no one generally accepted and right manner to integrate corporate responsibility successfully into business.

NEW BUSINESS MODELS – Sustainability as a main focus

A business model is a structure frame of an organization that can bring significant benefits and competitive advantage when structured properly. The aim of this paper was to observe and describe development of business models’ and identify factors and elements of a business model that are in a key role from the perspective of an organizational sustainability. One is striving to bring out in this thesis how should truly sustainable business model look like and what are main characteristics of it. Additionally, some recommendations that could be helpful in order to build sustainable and balanced business model in a company are presented in this work. The meaning was to make theoretical and in some extent practical acquaintance with such new business models as open business model and sustainable business model. Long-term sustainability achievement in a company was in a centric role and used as a main criteria when constructing sustainable business model structure. The main research question in this study aims to answer: What a firm should consider in order to develop profitable and sustainable business model? This study is qualitative in nature and it was conducted using content analyze as a main method of this research. The perspective of the target data in this study is an outlook of its producers of how sustainability is reached in an organization throw business model and which practices are important and has to be taken into account. The material was gathered mainly from secondary sources and the theoretical framework was outright built based on secondary data. The secondary data that have been mostly dissertations, academic writings, cases, academic journals and academic books have been analyzed from the point of view of sustainability perspective. As a result it became evident that a structure of a business model and its implementation along with a strategy is often what leads companies to success. However, for the most part, overall business environment decides and delimits how the most optimal business model should be constructed in order to be effective and sustainable. The evaluation of key factors and elements in business model leading organization to sustainability should be examined throw triple bottom line perspective, where key dimensions are environmental, social and economic. It was concluded that dimensions should be evaluated as equal in order to attain total long lasting sustainability, contradicting traditional perspective in business where profit production is seen as only main goal of a business.