The reconstruction of social meaning in the space of flows

Artikkeli on alunperin julkaistu teoksessa: The informational city (1989) / Manuel Castells

Development of Craniofacial Bone Defect Reconstruction Implant Based on Fibre-Reinforced Composite with Photopolymerisable Resin Systems. Experimental studies in vitro and in vivo.

Reconstruction of defects in the craniomaxillofacial (CMF) area has mainly been based on bone grafts or metallic fixing plates and screws. Particularly in the case of large calvarial and/or craniofacial defects caused by trauma, tumours or congenital malformations, there is a need for reliable reconstruction biomaterials, because bone grafts or metallic fixing systems do not completely fulfill the criteria for the best possible reconstruction methods in these complicated cases. In this series of studies, the usability of fibre-reinforced composite (FRC) was studied as a biostable, nonmetallic alternative material for reconstructing artificially created bone defects in frontal and calvarial areas of rabbits. The experimental part of this work describes the different stages of the product development process from the first in vitro tests with resin-impregnated fibrereinforced composites to the in vivo animal studies, in which this FRC was tested as an implant material for reconstructing different size bone defects in rabbit frontal and calvarial areas. In the first in vitro study, the FRC was polymerised in contact with bone or blood in the laboratory. The polymerised FRC samples were then incubated in water, which was analysed for residual monomer content by using high performance liquid chromatography (HPLC). It was found that this in vitro polymerisation in contact with bone and blood did not markedly increase the residual monomer leaching from the FRC. In the second in vitro study, different adhesive systems were tested in fixing the implant to bone surface. This was done to find an alternative implant fixing system to screws and pins. On the basis of this study, it was found that the surface of the calvarial bone needed both mechanical and chemical treatments before the resinimpregnated FRC could be properly fixed onto it. In three animal studies performed with rabbit frontal bone defects and critical size calvarial bone defect models, biological responses to the FRC implants were evaluated. On the basis of theseevaluations, it can be concluded that the FRC, based on E-glass (electrical glass) fibres forming a porous fibre veil enables the ingrowth of connective tissues to the inner structures of the material, as well as the bone formation and mineralization inside the fibre veil. Bone formation could be enhanced by using bioactive glass granules fixed to the FRC implants. FRC-implanted bone defects healed partly; no total healing of defects was achieved. Biological responses during the follow-up time, at a maximum of 12 weeks, to resin-impregnated composite implant seemed to depend on the polymerization time of the resin matrix of the FRC. Both of the studied resin systems used in the FRC were photopolymerised and the heat-induced postpolymerisation was used additionally.

Power quality improving with virtual flux-based voltage source line converter

Line converters have become an attractive AC/DC power conversion solution in industrial applications. Line converters are based on controllable semiconductor switches, typically insulated gate bipolar transistors. Compared to the traditional diode bridge-based power converters line converters have many advantageous characteristics, including bidirectional power flow, controllable de-link voltage and power factor and sinusoidal line current. This thesis considers the control of the lineconverter and its application to power quality improving. The line converter control system studied is based on the virtual flux linkage orientation and the direct torque control (DTC) principle. A new DTC-based current control scheme is introduced and analyzed. The overmodulation characteristics of the DTC converter are considered and an analytical equation for the maximum modulation index is derived. The integration of the active filtering features to the line converter isconsidered. Three different active filtering methods are implemented. A frequency-domain method, which is based on selective harmonic sequence elimination, anda time-domain method, which is effective in a wider frequency band, are used inharmonic current compensation. Also, a voltage feedback active filtering method, which mitigates harmonic sequences of the grid voltage, is implemented. The frequency-domain and the voltage feedback active filtering control systems are analyzed and controllers are designed. The designs are verified with practical measurements. The performance and the characteristics of the implemented active filtering methods are compared and the effect of the L- and the LCL-type line filteris discussed. The importance of the correct grid impedance estimate in the voltage feedback active filter control system is discussed and a new measurement-based method to obtain it is proposed. Also, a power conditioning system (PCS) application of the line converter is considered. A new method for correcting the voltage unbalance of the PCS-fed island network is proposed and experimentally validated.

Reconstruction of 3D Planar Objects with Partial Occlusion

Kolmiulotteisten kappaleiden rekonstruktio on yksi konenäön haastavimmista ongelmista, koska kappaleiden kolmiulotteisia etäisyyksiä ei voida selvittää yhdestä kaksiulotteisesta kuvasta. Ongelma voidaan ratkaista stereonäön avulla, jossa näkymän kolmiulotteinen rakenne päätellään usean kuvan perusteella. Tämä lähestymistapa mahdollistaa kuitenkin vain rekonstruktion niille kappaleiden osille, jotka näkyvät vähintään kahdessa kuvassa. Piilossa olevien osien rekonstruktio ei ole mahdollista pelkästään stereonäön avulla. Tässä työssä on kehitetty uusi menetelmä osittain piilossa olevien kolmiulotteisten tasomaisten kappaleiden rekonstruktioon. Menetelmän avulla voidaan selvittää hyvällä tarkkuudella tasomaisista pinnoista koostuvan kappaleen muoto ja paikka käyttäen kahta kuvaa kappaleesta. Menetelmä perustuu epipolaarigeometriaan, jonka avulla selvitetään molemmissa kuvissa näkyvät kappaleiden osat. Osittain piilossa olevien piirteiden rekonstruointi suoritetaan käyttämäen stereonäköä sekä tietoa kappaleen rakenteesta. Esitettyä ratkaisua voitaisiin käyttää esimerkiksi kolmiulotteisten kappaleiden visualisointiin, robotin navigointiin tai esineentunnistukseen.

Global virtual teamwork. Building and communicating trust through technology

Tutkimuksen ensisijaisena tavoitteena oli tarkastella luottamuksen rakentumista virtuaalitiimissä. Keskeistä tarkastelussa olivat luottamuksen lähteiden löytäminen, suhteen rakentuminen sekä teknologiavälitteinen kommunikaatio. Myös käytännön keinoja ja sovelluksia etsittiin. Tässä tutkimuksessa luottamus nähtiin tärkeänä yhteistyön mahdollistajana sekä keskeisenä elementtinä ihmisten välisten suhteiden rakentumisessa. Tämä tutkimus oli empiirinen ja kuvaileva tapaustutkimus. Tutkimuksessa kvalitatiivista aineistoa kerättiin pääasiassa web-pohjaisen kyselyn sekä puhelinhaastattelun avulla. Aineistonkeruu toteutettiin siis pääasiassa virtuaalisesti. Saatu aineisto analysoitiin teemoittelun avulla. Tässä työssä teemoja etsittiin tekstistä pääasiassa teoriasta johdettujen oletusten perusteella. Tutkimuksen tuloksena oli, että luottamusta rakentavia mekanismeja ovat, karkeasti luokiteltuna, yhteiset päämäärät ja vastuut, kommunikaatio, sosiaalinen kanssakäyminen ja informaation jakaminen, toisten huomioiminen ja henkilökohtaiset ominaisuudet. Mekanismit eivät suuresti eronneet luottamuksen rakentumisen mekanismeista perinteisessä kontekstissa. Virtuaalitiimityön alkuvaiheessa luottamus pohjautui käsityksille toisten tiimin jäsenten kyvykkyydestä. Myös institutionaalinen identifioituminen loi pohjaa luottamukselle alkuvaiheessa. Muuten luottamus rakentui vähän kerrassaan tehtävään liittyvän kommunikaation ja sosiaalisen kommunikaation kautta. Tekojen merkitys korostui erityisesti ajan myötä. Työssä esitettiin myös käytännön keinoja luottamuksen rakentamiseksi. Olemassa olevien teknologioiden havaittiin tukevan hyvin suhteen rakentumista tiedon jakamiseen ja sen varastoimiseen liittyvissä tehtävissä. Sen sijaan vuorovaikutuksen näkökulmasta tuen ei nähty olevan yhtä kattavaa. Kaiken kaikkiaan kuitenkin parannuksella sosiaalisissa suhteissa voitaneen saada enemmän aikaan kuin parannuksilla teknologian suhteen.

Communication challenges in virtual teams – a case study of implementing computer-mediated communication technologies in inter-organisational virtual teams

This thesis seeks to answer, if communication challenges in virtual teams can be overcome with the help of computer-mediated communication. Virtual teams are becoming more common work method in many global companies. In order for virtual teams to reach their maximum potential, effective asynchronous and synchronous methods for communication are needed. The thesis covers communication in virtual teams, as well as leadership and trust building in virtual environments with the help of CMC. First, the communication challenges in virtual teams are identified by using a framework of knowledge sharing barriers in virtual teams by Rosen et al. (2007) Secondly, the leadership and trust in virtual teams are defined in the context of CMC. The performance of virtual teams is evaluated in the case study by exploiting these three dimensions. With the help of a case study of two virtual teams, the practical issues related to selecting and implementing communication technologies as well as overcoming knowledge sharing barriers is being discussed. The case studies involve a complex inter-organisational setting, where four companies are working together in order to maintain a new IT system. The communication difficulties are related to inadequate communication technologies, lack of trust and the undefined relationships of the stakeholders and the team members. As a result, it is suggested that communication technologies are needed in order to improve the virtual team performance, but are not however solely capable of solving the communication challenges in virtual teams. In addition, suitable leadership and trust between team members are required in order to improve the knowledge sharing and communication in virtual teams.

Managing virtual project teams

The purpose of the Master’s Thesis is to study the best practices to virtual project management from the project manager’ point of view. The best practices are divided according to a five-phase virtual project life cycle model. Each phase include concrete suggestions for actions. Research’s theoretical background is wide because of the broad subject matter. In the theoretical part topics such as virtual working, virtual project management challenges are examined and some concrete actions to tackle these challenges are introduced. Thesis’ approach is constructive, where a known problem is solved piece by piece after creating a pre-understanding of the topic. Existing research work is utilized when creating a model for virtual project team management. The basis of the model comes from various best practices read from literature and from the interviews conducted on experienced virtual project managers in the case organization. As a result the model combines both previous research and the organizations empirical experience. As an output of the thesis a model for virtual project team management is developed, which can be used as a guideline by the virtual project managers in their work. The model includes actions and practices what can be used to overcome the challenges of virtual project management.

Knowledge sharing in virtual communities

The Internet has transformed the scope, boundaries and dynamics of social and economic interactions. It is argued to have broadened the notion of the community from physical, colocated groups towards collectives that are able to transcend time and space, i.e. virtual communities. Even if virtual communities have been on the academic agenda for a couple of decades, there is still surprisingly little research on knowledge sharing within them. In addition, prior research has largely neglected the complex dynamics between Internet-based communication channels and the surrounding communities in which they are embedded. This thesis aims at building a better understanding of knowledge sharing supported by conversational technologies in intra-organisational virtual communities and external virtual communities supporting relationships with customers. The focus is thus on knowledge sharing in types of virtual communities that seem to be of relevance to business organisations. The study consists of two parts. The first part introduces the research topic and discusses the overall results. The second part comprises seven research publications. Qualitative research methods are used throughout the study. The results of the study indicate that investigation of the processes of knowledge sharing in virtual communities requires a socio-technical perspective, combining the individual, social and technological levels, and understanding the interplay between them. It is claimed that collective knowledge in virtual communities creates the enabling structure for knowledge sharing, and forms the invisible structure of the community on the basis of which it operates. It consists of a shared context, social capital and a unique community culture. The Internet does not inevitably erode social interaction: it seems that supporting social relationships by means of communication technology is a matter of quantity rather than quality. In order to provide access to external knowledge and expertise, firms need to open themselves up to an array of Internet-based conversations, and to consider the relevance of virtual communities to their businesses.

Reconstruction and analysis of surface variation using photometric stereo

In many industrial applications, accurate and fast surface reconstruction is essential for quality control. Variation in surface finishing parameters, such as surface roughness, can reflect defects in a manufacturing process, non-optimal product operational efficiency, and reduced life expectancy of the product. This thesis considers reconstruction and analysis of high-frequency variation, that is roughness, on planar surfaces. Standard roughness measures in industry are calculated from surface topography. A fast and non-contact method to obtain surface topography is to apply photometric stereo in the estimation of surface gradients and to reconstruct the surface by integrating the gradient fields. Alternatively, visual methods, such as statistical measures, fractal dimension and distance transforms, can be used to characterize surface roughness directly from gray-scale images. In this thesis, the accuracy of distance transforms, statistical measures, and fractal dimension are evaluated in the estimation of surface roughness from gray-scale images and topographies. The results are contrasted to standard industry roughness measures. In distance transforms, the key idea is that distance values calculated along a highly varying surface are greater than distances calculated along a smoother surface. Statistical measures and fractal dimension are common surface roughness measures. In the experiments, skewness and variance of brightness distribution, fractal dimension, and distance transforms exhibited strong linear correlations to standard industry roughness measures. One of the key strengths of photometric stereo method is the acquisition of higher frequency variation of surfaces. In this thesis, the reconstruction of planar high-frequency varying surfaces is studied in the presence of imaging noise and blur. Two Wiener filterbased methods are proposed of which one is optimal in the sense of surface power spectral density given the spectral properties of the imaging noise and blur. Experiments show that the proposed methods preserve the inherent high-frequency variation in the reconstructed surfaces, whereas traditional reconstruction methods typically handle incorrect measurements by smoothing, which dampens the high-frequency variation.

Towards Innovative Virtual Learning in Vocational Teacher Education: Narratives as a Form of Meaningful Learning

http://www.eurodl.org/.

Ba in Virtual Communities

Virtual communities – interactive networks in cyberspace seasoned with feelings – are a highly topical research theme. Besides academics, more and more companies ponder upon the nature and implications of the sense of virtual communities. This thesis takes a novel viewpoint on this research and examines virtual communities from virtual ba perspective. Ba is the space – in this case a virtual and a mental one, where knowledge based interaction occurs. The aim of this thesis is to clarify the concept of virtual ba, and the development and appearance of ba in virtual communities. The scientific contribution of this qualitative case study is conceptual clarification and validation of the concept of virtual ba. The empirical part of the thesis examines blogs: Internet-based communication media, using data triangulation (observation, narratives and a thematic interview). The thesis provides insights into the development of virtual ba that has also managerial relevance.

Knowledge Sharing in a Virtual Learning Community

The focus of this Master’s Thesis is on knowledge sharing in a virtual Learning community. The theoretical part of this study aims at presenting the theory of knowledge sharing, competence development and learning in virtual teams. The features of successful learning organizations as well as enablers of effective knowledge sharing in virtual communities are also introduced to the reader in the theoretical framework. The empirical research for this study was realized in a global ICT company, specifically in its Human Resources business unit. The research consisted of two rounds of online questionnaires, which were conducted among all the members of the virtual Learning community. The research aim was to find shared opinions concerning the features of a successful virtual Learning community. The analysis of the data in this study was conducted using a qualitative research methodology. The empirical research showed that the main important features of a successful virtual Learning community are members’ passion towards the community way of working as well as the relevance of the content in the virtual community. In general, it was found that knowledge sharing and competence development are important matters in dynamic organizations as well as virtual communities as method and tool for sharing knowledge and hence increasing both individual and organizational knowledge. This is proved by theoretical and by empirical research in this study.