Managing manufacturing data and improving its accuracy

There are two main objects in this study: First, to prove the importance of data accuracy to the business success, and second, create a tool for observing and improving the accuracy of ERP systems production master data. Sub-objective is to explain the need for new tool in client company and the meaning of it for the company. In the theoretical part of this thesis the focus is in stating the importance of data accuracy in decision making and it's implications on business success. Also basics of manufacturing planning are introduced in order to explain the key vocabulary. In the empirical part the client company and its need for this study is introduced. New master data report is introduced, and finally, analysing the report and actions based on the results of analysis are explained. The main results of this thesis are finding the interdependence between data accuracy and business success, and providing a report for continuous master data improvement in the client company's ERP system.

Tarjoustoiminnankehittäminen projektiliiketoiminnassa - tiedonhallinta ja työkalut

Työn tavoitteena on tehdä pohjatutkimus tarjoustoiminnan kehittämiseksi Larox Oyj:ssä. Työssä hahmotetaan haastatteluiden avulla tämänhetkiset ongelma-alueet tarjoustoiminnassa ja tiedonhallinnassa. Nykyisin suurimpina kehityshaasteina ovat rutiinityön manuaalinen hallinta, tiedon hankala saatavuus ja selkeiden yhteisten pelisääntöjen puuttuminen tarjoustoiminnassa. Näihin haasteisiin pyritään löytämään ratkaisuvaihtoehtoja. Työ sisältää teoriaosan, jossa käydään läpi projektin ominaispiirteitä, tarjoustoiminnan osuutta projektiliiketoiminnassa, elinkaarenaikaisen tiedonhallinnan keinoja sekä massaräätälöinnin toimintaperiaatteita. Tarjoustoimintaa pyritään kehittämään käsitellyn teorian, benchmark-vierailuilta saatujen ideoiden sekä haastatteluissa tulleiden toiveiden pohjalta. Tuloksena saadaan kehitysideat pitkäjänteiseen kehitystyöhön sekä nopeasti toteutettaviin toimenpiteisiin. Keskeinen kehitysidea on tarjouskonfiguraattorin kehitystyön aloittaminen. Sen avulla pyritään vähentämään tarjousinsinöörien työtaakkaa. Silloin tarjousinsinööreille jää aikaa toteuttaa osaamistaan haastavampien ja suurempien tarjouksien tekemisessä. Tuloksena on saatu neliportainen kehityspolku, jota kulkemalla päästään kohti hahmotettua tavoitetilaa. Työn tuloksia käytetään hyväksi aloitettaessa konfiguraattorin kehitys Laroxilla sekä kehitettäessä koko tarjoustoimintaa ja elinkaarenaikaista tiedonhallintaa yrityksessä.

Tutkimus- ja kehitysvaiheen toteuttaminen teknologisessa innovaatioprosessissa

Through the ages technological changes have created new challenges and possibilities to develop products, services, processes or organizations. Management of the technology concerns all of those activities from technical invention to commercial application. Management of the technologic innovation process is the more challenging the more technology is involved in a process. Researches of the technological innovations are seldom concern the implementation of early phases and especially in product manufacturing company. Still there are research and development activities. Therefore the purpose of this research is to develop the pattern for implementation of research and development phases in technological innovation process. This study focuses the main elements of the technological innovation management and main obstacles and drivers. This study also focuses decision making and the other influencing elements of the decision making. The research design of this explorative research applies a qualitative research strategy where a case study method is utilized to collect and analyze the data. The study consisted of a single case to utilize of technological ideas and possibilities. The selected case company was the product manufacturing company which didn’t have own technological research and development organization. The case was a process which was analyzed from two different perspectives. The main unit of analysis was the whole process. The data collecting method of this study included semi-structured and open interviews, participant-observations and experimental tests. Analyzing the case data relies on the theoretical propositions of the framework based on the previous research. Based on this research the key elements of the research and development phases in technological innovation process were technical expertise and preliminary investigation. The obstacles and drivers in the R&D phases by the case were management of the whole process and resources and knowing objectives of process and learning during the process. In addition to the result of the research was the feature of decision making to optimize used time. The findings of this study gave further insight implementation of the technological innovation in the product manufacturing company. The research was based a single case which means the results cannot be generalized to different companies or industry fields. Therefore the results generalizing require further research with multiple researchers.

Tutkimus- ja kehitysvaiheen toteuttaminen teknologisessa innovaatioprosessissa

Teknologiset muutokset ovat kautta aikojen luoneet uusia haasteita ja mahdollisuuksia tuotteiden, palveluiden, prosessien tai organisaatioiden kehittämiseen. Teknologian johtaminen tarkoittaa kaikki niitä toimia, joiden avulla teknologisesta keksinnöstä saadaan kaupallinen sovellus. Teknologisen innovaatioprosessin johtaminen on, sitä haasteellisempaa, mitä enemmän siinä on mukana teknologiaa. Harvoin teknologisten innovaatioiden tutkimukset ovat kohdistuneet prosessin varhaisen vaiheen toteutukseen ja erityisesti tuotannolliseen toimintaan keskittyvissä yrityksissä, vaikka kaikissa tuotteita valmistavissa teollisuuksissa tapahtuu tutkimus- ja kehitystyötä. Siksi tämän tutkimuksen tavoitteena on kehittää toimintamalli teknologisen innovaatioprosessin tutkimus- ja kehitysvaiheen toteuttamiselle. Tutkimus keskittyy teknologisen innovaatioprosessin tärkeimpiin elementteihin johtamisen ja prosessin kannalta sekä sen estäviin ja edistäviin tekijöihin. Tutkimuksessa tarkastellaan myös päätöksentekoa ja siihen vaikuttavia tekijöitä. Tutkimus oli kartoittava ja sillä oli laadullinen tutkimusstrategia. Tarkempi tutkimusmenetelmä kerätä ja analysoida tutkimustietoa oli tapaustutkimus. Tämä tutkimus perustui yhteen tapaukseen teknologisten ideoiden ja mahdollisuuksien hyödyntämisestä. Valittu tapausyritys oli tuotteita valmistava yritys, jolla ei ollut varsinaista tutkimus- ja kehitysorganisaatiota teknologian kehittämistä varten. Itse tapaus oli prosessi, jota analysoitiin kahdesta eri näkökulmasta, mutta primääri analysointiyksikkö oli koko prosessi. Aineiston hankintamenetelmät olivat puolistrukturoidut ja avoimet haastattelut, osallistuva havainnointi ja kokeelliset tutkimukset. Aineiston analysointi perustui aikaisemmin tutkimuksen yhteydessä rakennettuun teoreettiseen viitekehykseen. Teknologisen innovaatioprosessin tutkimus- ja kehitysvaiheen tärkeimmät elementit tutkimuksen mukaan olivat oman teknologian asiantuntemus ja esitutkimusvaihe. Tekijät, jotka tutkimuksen mukaan estivät ja edistivät T&K -vaiheen onnistumista, olivat koko prosessin ja resurssien johtaminen sekä tietoisuus prosessin tavoitteista ja prosessin aikainen oppiminen. Tutkimuksessa löydettiin myös päätöksentekoon liittyvä ominaisuus optimoida siihen käytettävää aikaa. Tutkimuksen tulokset lisäsivät näkemystä teknologisten innovaatioiden toteuttamisesta tuotteita valmistavassa yrityksessä. Tutkimus perustui yhteen tapaukseen, minkä vuoksi tulokset eivät ole yleistettävissä muihin yrityksiin tai toimialoihin. Tulosten yleistämistä varten tutkimuksia tulisi suorittaa lisää ja käyttää useita tutkijoita.

Korkeasti kuormitetun soodakattilan likaantumisen ja päästöjen vähentäminen

Tässä työssä perehdytään korkeasti kuormitettujen soodakattiloiden tyypillisiin ongelmiin. Ongelmia ovat likaantuminen ja tukkeutuminen sekä liialliset päästöt. Työn teoriaosassa esitetään taustat likaantumiselle ja päästöjen muodostumiselle. Molemmat johtuvat suurelta osin tulipesän huonosta toiminnasta. Soodakattilan ilmajärjestelmä ja mustalipeän ruiskutus vaikuttavat tulipesän toimintaan. Usein tulipesän toimintaa voidaan parantaa ilmajärjestelmän ja lipeänruiskutuksen säätöjä muuttamalla. Suurempi muutos tulipesän toimintaan saadaan uusimalla perinteinen sekundääri-ilmajärjestelmä vertikaali-ilmajärjestelmäksi. Nykyaikainen vertikaali-ilmajärjestelmä sekoittaa savukaasut tehokkaasti ja saa aikaan tasaisemman virtauksen tulipesään. Myös mustalipeän korkea kloori- ja kaliumpitoisuus voivat aiheuttaa lämpöpintojen likaantumista. Oikea nuohointen sijainti on tärkeä tekijä kattilan puhtaana pysymisen kannalta. Työn kokeellisessa osassa selvitetään, kuinka erään eukalyptussellutehtaan korkeasti kuormitetun soodakattilan käytettävyyttä voidaan parantaa ja kapasiteettia nostaa soodakattilan toimintaa virittämällä. Kattilan nykyinen ajomalli ja ongelmat selvitettiin. Tulipesän toimintaa testattiin muuttamalla ilmajakoa primääri-, sekundääri- ja tertiääri-ilman välillä ja muuttamalla sekundääri-ilman syöttöä tulipesään. Testien ja kerätyn tiedon perusteella voitiin päätellä, miten soodakattilaa kannattaa modernisoida kapasiteetin nostamiseksi ja käytettävyyden parantamiseksi. Usein tulipesän toimintaa ja käytettävyyttä voidaan parantaa paljon jo pienilläkin muutostöillä. Kapasiteetin nostaminen vaatii tavallisesti suuremman investoinnin ja pidennetyn vuosihuoltoseisokin.

Interoperability for IoT Health Systems Using HL7 Standard

Internet of Things or IoT is revolutionizing the world we are living in, similarly the way Internet and the web did few decades ago. It is changing how we interact with the things surrounding us. Electronic health and remote patient monitoring are the ways of utilizing these technological improvements towards the healthcare. There are many applications of IoT in eHealth such as, it will open the gate to provide healthcare to the remote areas of the world, where healthcare through traditional hospital systems cannot be provided. To connect these new eHealth IoT systems with the existing healthcare information systems, we can use the existing interoperability standards commonly used in healthcare information systems. In this thesis we implemented an eHealth IoT system based on Health Level 7 interoperability standard for continuous data transmission. There is not much previous work done in implementing the HL7 for continuous sensor data transmission. Some of the previous work was limited to sensors which are not continuous in nature and some of it is only theatrical architecture. This thesis aims to prove that it is possible to implement an eHealth IoT system by using sensors which require continues data transmission, such as respiratory sensors, and to connect it with the existing eHealth information system semantically by using HL7 interoperability standard. This system will be beneficial in implementing eHealth IoT systems for those patients, who requires continuous healthcare personal monitoring. This includes elderly people and patients, whose health need to be monitored constantly. To implement the architecture, HL7 v2.5 is selected due to its ease of implementation and low size. We selected some open source technologies because of their open licenses and large developer community. We will also review the most efficient technology available in every layer of eHealth IoT system and will propose an efficient system.

Weak Form Tests of Efficient Market Hypothesis: Evidence from CEE-Countries and Russian Stock Markets

Tämän tutkielman tavoitteena on selvittää Venäjän, Slovakian, Tsekin, Romanian, Bulgarian, Unkarin ja Puolan osakemarkkinoiden heikkojen ehtojen tehokkuutta. Tämä tutkielma on kvantitatiivinen tutkimus ja päiväkohtaiset indeksin sulkemisarvot kerättiin Datastreamin tietokannasta. Data kerättiin pörssien ensimmäisestä kaupankäyntipäivästä aina vuoden 2006 elokuun loppuun saakka. Analysoinnin tehostamiseksi dataa tutkittiin koko aineistolla, sekä kahdella aliperiodilla. Osakemarkkinoiden tehokkuutta on testattu neljällä tilastollisella metodilla, mukaan lukien autokorrelaatiotesti ja epäparametrinen runs-testi. Tavoitteena on myös selvittääesiintyykö kyseisillä markkinoilla viikonpäiväanomalia. Viikonpäiväanomalian esiintymistä tutkitaan käyttämällä pienimmän neliösumman menetelmää (OLS). Viikonpäiväanomalia on löydettävissä kaikilta edellä mainituilta osakemarkkinoilta paitsi Tsekin markkinoilta. Merkittävää, positiivista tai negatiivista autokorrelaatiota, on löydettävissä kaikilta osakemarkkinoilta, myös Ljung-Box testi osoittaa kaikkien markkinoiden tehottomuutta täydellä periodilla. Osakemarkkinoiden satunnaiskulku hylätään runs-testin perusteella kaikilta muilta paitsi Slovakian osakemarkkinoilla, ainakin tarkastellessa koko aineistoa tai ensimmäistä aliperiodia. Aineisto ei myöskään ole normaalijakautunut minkään indeksin tai aikajakson kohdalla. Nämä havainnot osoittavat, että kyseessä olevat markkinat eivät ole heikkojen ehtojen mukaan tehokkaita

The Persistence of Finnish Equity Fund Performance

Tutkimuksen tavoitteena on selvittää, esiintyykö suomeen sijoittavilla osakerahastoilla menestyksen pysyvyyttä. Tutkimusaineisto koostuu kaikista suomalaisista osakerahastoista, jotka toimivat ajanjaksolla 15.1.1998-13.1.2005. Aineisto on vapaa selviytymisvinoumasta. Suorituskyvyn mittareina käytetään CAPM-alfaa sekä kolmi- ja nelifaktori-alfaa. Empiirisessä osassa osakerahastojen menestyksen pysyvyyttä testataan Spearmanin järjestyskorrelaatiotestillä. Evidenssi menestyksen pysyvyydestä jäi vähäiseksi, vaikkakin sitä esiintyi satunnaisesti kaikilla menestysmittareilla joillakin ranking- ja sijoitusperiodin yhdistelmillä. CAPM-alfalla tarkasteltuna tilastollisesti merkitsevää menestyksen pysyvyyttä esiintyi selvästi useammin kuin muilla menestysmittareilla. Tulokset tukevat viimeaikaisia kansainvälisiä tutkimuksia, joiden mukaan menestyksen pysyvyys riippuu usein mittaustavasta. Menestysmittareina käytettyjen regressiomallien merkitsevyystestit osoittavat multifaktorimallien selittävän osakerahastojen tuottoja CAPM:a paremmin. Lisätyt muuttujat parantavat merkittävästi CAPM:n selitysvoimaa.

Artificially Intelligent and Adaptive Methods for Prediction and Analysis of Superheater Fireside Corrosion in Fluidized Bed Boilers

Superheater corrosion causes vast annual losses for the power companies. With a reliable corrosion prediction method, the plants can be designed accordingly, and knowledge of fuel selection and determination of process conditions may be utilized to minimize superheater corrosion. Growing interest to use recycled fuels creates additional demands for the prediction of corrosion potential. Models depending on corrosion theories will fail, if relations between the inputs and the output are poorly known. A prediction model based on fuzzy logic and an artificial neural network is able to improve its performance as the amount of data increases. The corrosion rate of a superheater material can most reliably be detected with a test done in a test combustor or in a commercial boiler. The steel samples can be located in a special, temperature-controlled probe, and exposed to the corrosive environment for a desired time. These tests give information about the average corrosion potential in that environment. Samples may also be cut from superheaters during shutdowns. The analysis ofsamples taken from probes or superheaters after exposure to corrosive environment is a demanding task: if the corrosive contaminants can be reliably analyzed, the corrosion chemistry can be determined, and an estimate of the material lifetime can be given. In cases where the reason for corrosion is not clear, the determination of the corrosion chemistry and the lifetime estimation is more demanding. In order to provide a laboratory tool for the analysis and prediction, a newapproach was chosen. During this study, the following tools were generated: · Amodel for the prediction of superheater fireside corrosion, based on fuzzy logic and an artificial neural network, build upon a corrosion database developed offuel and bed material analyses, and measured corrosion data. The developed model predicts superheater corrosion with high accuracy at the early stages of a project. · An adaptive corrosion analysis tool based on image analysis, constructedas an expert system. This system utilizes implementation of user-defined algorithms, which allows the development of an artificially intelligent system for thetask. According to the results of the analyses, several new rules were developed for the determination of the degree and type of corrosion. By combining these two tools, a user-friendly expert system for the prediction and analyses of superheater fireside corrosion was developed. This tool may also be used for the minimization of corrosion risks by the design of fluidized bed boilers.

Gas-phase photocatalytic oxidation of volatile organic compounds

Substances emitted into the atmosphere by human activities in urban and industrial areas cause environmental problems such as air quality degradation, respiratory diseases, climate change, global warming, and stratospheric ozone depletion. Volatile organic compounds (VOCs) are major air pollutants, emitted largely by industry, transportation and households. Many VOCs are toxic, and some are considered to be carcinogenic, mutagenic, or teratogenic. A wide spectrum of VOCs is readily oxidized photocatalytically. Photocatalytic oxidation (PCO) over titanium dioxide may present a potential alternative to air treatment strategies currently in use, such as adsorption and thermal treatment, due to its advantageous activity under ambient conditions, although higher but still mild temperatures may also be applied. The objective of the present research was to disclose routes of chemical reactions, estimate the kinetics and the sensitivity of gas-phase PCO to reaction conditions in respect of air pollutants containing heteroatoms in their molecules. Deactivation of the photocatalyst and restoration of its activity was also taken under consideration to assess the practical possibility of the application of PCO to the treatment of air polluted with VOCs. UV-irradiated titanium dioxide was selected as a photocatalyst for its chemical inertness, non-toxic character and low cost. In the present work Degussa P25 TiO2 photocatalyst was mostly used. In transient studies platinized TiO2 was also studied. The experimental research into PCO of following VOCs was undertaken: - methyl tert-butyl ether (MTBE) as the basic oxygenated motor fuel additive and, thus, a major non-biodegradable pollutant of groundwater; - tert-butyl alcohol (TBA) as the primary product of MTBE hydrolysis and PCO; - ethyl mercaptan (ethanethiol) as one of the reduced sulphur pungent air pollutants in the pulp-and-paper industry; - methylamine (MA) and dimethylamine (DMA) as the amino compounds often emitted by various industries. The PCO of VOCs was studied using a continuous-flow mode. The PCO of MTBE and TBA was also studied by transient mode, in which carbon dioxide, water, and acetone were identified as the main gas-phase products. The volatile products of thermal catalytic oxidation (TCO) of MTBE included 2-methyl-1-propene (2-MP), carbon monoxide, carbon dioxide and water; TBA decomposed to 2-MP and water. Continuous PCO of 4 TBA proceeded faster in humid air than dry air. MTBE oxidation, however, was less sensitive to humidity. The TiO2 catalyst was stable during continuous PCO of MTBE and TBA above 373 K, but gradually lost activity below 373 K; the catalyst could be regenerated by UV irradiation in the absence of gas-phase VOCs. Sulphur dioxide, carbon monoxide, carbon dioxide and water were identified as ultimate products of PCO of ethanethiol. Acetic acid was identified as a photocatalytic oxidation by-product. The limits of ethanethiol concentration and temperature, at which the reactor performance was stable for indefinite time, were established. The apparent reaction kinetics appeared to be independent of the reaction temperature within the studied limits, 373 to 453 K. The catalyst was completely and irreversibly deactivated with ethanethiol TCO. Volatile PCO products of MA included ammonia, nitrogen dioxide, nitrous oxide, carbon dioxide and water. Formamide was observed among DMA PCO products together with others similar to the ones of MA. TCO for both substances resulted in the formation of ammonia, hydrogen cyanide, carbon monoxide, carbon dioxide and water. No deactivation of the photocatalyst during the multiple long-run experiments was observed at the concentrations and temperatures used in the study. PCO of MA was also studied in the aqueous phase. Maximum efficiency was achieved in an alkaline media, where MA exhibited high fugitivity. Two mechanisms of aqueous PCO – decomposition to formate and ammonia, and oxidation of organic nitrogen directly to nitrite - lead ultimately to carbon dioxide, water, ammonia and nitrate: formate and nitrite were observed as intermediates. A part of the ammonia formed in the reaction was oxidized to nitrite and nitrate. This finding helped in better understanding of the gasphase PCO pathways. The PCO kinetic data for VOCs fitted well to the monomolecular Langmuir- Hinshelwood (L-H) model, whereas TCO kinetic behaviour matched the first order process for volatile amines and the L-H model for others. It should be noted that both LH and the first order equations were only the data fit, not the real description of the reaction kinetics. The dependence of the kinetic constants on temperature was established in the form of an Arrhenius equation.

Evaluation of Teacher Education Programs by Students and Graduates

The purpose of this research was to do a repeated cross-sectional research on class teachers who study in the 4th year and also graduated at the Faculty of Education, University of Turku between the years of 2000 through 2004. Specifically, seven research questions were addressed to target the main purpose of the study: How do class teacher education masters’ degree senior students and graduates rate “importance; effectiveness; and quality” of training they have received at the Faculty of Education? Are there significant differences between overall ratings of importance; effectiveness and quality of training by year of graduation, sex, and age (for graduates) and sex and age (for senior students)? Is there significant relationship between respondents’ overall ratings of importance; effectiveness and their overall ratings of the quality of training and preparation they have received? Are there significant differences between graduates and senior students about importance, effectiveness, and quality of teacher education programs? And what do teachers’ [Graduates] believe about how increasing work experience has changed their opinions of their preservice training? Moreover the following concepts related to the instructional activities were studied: critical thinking skills, communication skills, attention to ethics, curriculum and instruction (planning), role of teacher and teaching knowledge, assessment skills, attention to continuous professional development, subject matters knowledge, knowledge of learning environment, and using educational technology. Researcher also tried to find influence of some moderator variables e.g. year of graduation, sex, and age on the dependent and independent variables. This study consisted of two questionnaires (a structured likert-scale and an open ended questionnaire). The population in study 1 was all senior students and 2000-2004 class teacher education masters’ degree from the departments of Teacher Education Faculty of Education at University of Turku. Of the 1020 students and graduates the researcher was able to find current addresses of 675 of the subjects and of the 675 graduates contacted, 439 or 66.2 percent responded to the survey. The population in study 2 was all class teachers who graduated from Turku University and now work in the few basic schools (59 Schools) in South- West Finland. 257 teachers answered to the open ended web-based questions. SPSS was used to produce standard deviations; Analysis of Variance; Pearson Product Moment Correlation (r); T-test; ANOVA, Bonferroni post-hoc test; and Polynomial Contrast tests meant to analyze linear trend. An alpha level of .05 was used to determine statistical significance. The results of the study showed that: A majority of the respondents (graduates and students) rated the overall importance, effectiveness and quality of the teacher education programs as important, effective and good. Generally speaking there were only a few significant differences between the cohorts and groups related to the background variables (gender, age). The different cohorts were rating the quality of the programs very similarly but some differences between the cohorts were found in the importance and effectiveness ratings. Graduates of 2001 and 2002 rated the importance of the program significantly higher than 2000 graduates. The effectiveness of the programs was rated significantly higher by 2001 and 2003 graduates than other groups. In spite of these individual differences between cohorts there were no linear trends among the year cohorts in any measure. In respondents’ ratings of the effectiveness of teacher education programs there was significant difference between males and females; females rated it higher than males. There were no significant differences between males’ and females’ ratings of the importance and quality of programs. In the ratings there was only one difference between age groups. Older graduates (35 years or older) rated the importance of the teacher training significantly higher that 25-35 years old graduates. In graduates’ ratings there were positive but relatively low correlations between all variables related to importance, effectiveness and quality of Teacher Education Programs. Generally speaking students’ ratings about importance, effectiveness and quality of teacher education program were very positive. There was only one significant difference related to the background variables. Females rated higher the effectiveness of the program. The comparison of students’ and graduates’ perception about importance, effectiveness, and quality of teacher education programs showed that there were no significant differences between graduates and students in the overall ratings. However there were differences in some individual variables. Students rated higher in importance of “Continuous Professional Development”, effectiveness of “Critical Thinking Skills” and “Using Educational Technology” and quality of “Advice received from the advisor”. Graduates rated higher in importance of “Knowledge of Learning Environment” and effectiveness of “Continuous Professional Development”. According to the qualitative data of study 2 some graduates expressed that their perceptions have not changed about the importance, effectiveness, and quality of training that they received during their study time. They pointed out that teacher education programs have provided them the basic theoretical/formal knowledge and some training of practical routines. However, a majority of the teachers seems to have somewhat critical opinions about the teacher education. These teachers were not satisfied with teacher education programs because they argued that the programs failed to meet their practical demands in different everyday situations of the classroom e.g. in coping with students’ learning difficulties, multiprofessional communication with parents and other professional groups (psychologists and social workers), and classroom management problems. Participants also emphasized more practice oriented knowledge of subject matter, evaluation methods and teachers’ rights and responsibilities. Therefore, they (54.1% of participants) suggested that teacher education departments should provide more practice-based courses and programs as well as closer collaboration between regular schools and teacher education departments in order to fill gap between theory and practice.

Trigger and data link system for CMS Resistive Plate Chambers at the LHC accelerator

The purpose of the work was to realize a high-speed digital data transfer system for RPC muon chambers in the CMS experiment on CERN’s new LHC accelerator. This large scale system took many years and many stages of prototyping to develop, and required the participation of tens of people. The system interfaces to Frontend Boards (FEB) at the 200,000-channel detector and to the trigger and readout electronics in the control room of the experiment. The distance between these two is about 80 metres and the speed required for the optic links was pushing the limits of available technology when the project was started. Here, as in many other aspects of the design, it was assumed that the features of readily available commercial components would develop in the course of the design work, just as they did. By choosing a high speed it was possible to multiplex the data from some the chambers into the same fibres to reduce the number of links needed. Further reduction was achieved by employing zero suppression and data compression, and a total of only 660 optical links were needed. Another requirement, which conflicted somewhat with choosing the components a late as possible was that the design needed to be radiation tolerant to an ionizing dose of 100 Gy and to a have a moderate tolerance to Single Event Effects (SEEs). This required some radiation test campaigns, and eventually led to ASICs being chosen for some of the critical parts. The system was made to be as reconfigurable as possible. The reconfiguration needs to be done from a distance as the electronics is not accessible except for some short and rare service breaks once the accelerator starts running. Therefore reconfigurable logic is extensively used, and the firmware development for the FPGAs constituted a sizable part of the work. Some special techniques needed to be used there too, to achieve the required radiation tolerance. The system has been demonstrated to work in several laboratory and beam tests, and now we are waiting to see it in action when the LHC will start running in the autumn 2008.

Creating dynamic continuous improvement system for Larox Corporation

Today´s organizations must have the ability to react to rapid changes in the market. These rapid changes cause pressure to continuously find new efficient ways to organize work practices. Increased competition requires businesses to become more effective and to pay attention to quality of management and to make people to understand their work's impact on the final result. The fundamentals in continmuois improvement are systematic and agile tackling of indentified individual process constraints and the fact tha nothin finally improves without changes. Successful continuous improvement requires management commitment, education, implementation, measurement, recognition and regeneration. These ingredients form the foundation, both for breakthrough projects and small step ongoing improvement activities. One part of the organization's management system are the quality tools, which provide systematic methodologies for identifying problems, defining their root causes, finding solutions, gathering and sorting of data, supporting decision making and implementing the changes, and many other management tasks. Organizational change management includes processes and tools for managing the people in an organizational level change. These tools include a structured approach, which can be used for effective transition of organizations through change. When combined with the understanding of change management of individuals, these tools provide a framework for managing people in change,

Master data quality management in a global enterprise

In a networked business environment the visibility requirements towards the supply operations and customer interface has become tighter. In order to meet those requirements the master data of case company is seen as an enabler. However the current state of master data and its quality are not seen good enough to meet those requirements. In this thesis the target of research was to develop a process for managing master data quality as a continuous process and find solutions to cleanse the current customer and supplier data to meet the quality requirements defined in that process. Based on the theory of Master Data Management and data cleansing, small amount of master data was analyzed and cleansed using one commercial data cleansing solution available on the market. This was conducted in cooperation with the vendor as a proof of concept. In the proof of concept the cleansing solution’s applicability to improve the quality of current master data was proved. Based on those findings and the theory of data management the recommendations and proposals for improving the quality of data were given. In the results was also discovered that the biggest reasons for poor data quality is the lack of data governance in the company, and the current master data solutions and its restrictions.

Success factors of customer and supplier master data system

Especially in global enterprises, key data is fragmented in multiple Enterprise Resource Planning (ERP) systems. Thus the data is inconsistent, fragmented and redundant across the various systems. Master Data Management (MDM) is a concept, which creates cross-references between customers, suppliers and business units, and enables corporate hierarchies and structures. The overall goal for MDM is the ability to create an enterprise-wide consistent data model, which enables analyzing and reporting customer and supplier data. The goal of the study was defining the properties and success factors of a master data system. The theoretical background was based on literature and the case consisted of enterprise specific needs and demands. The theoretical part presents the concept, background, and principles of MDM and then the phases of system planning and implementation project. Case consists of background, definition of as is situation, definition of project, evaluation criterions and concludes the key results of the thesis. In the end chapter Conclusions combines common principles with the results of the case. The case part ended up dividing important factors of the system in success factors, technical requirements and business benefits. To clarify the project and find funding for the project, business benefits have to be defined and the realization has to be monitored. The thesis found out six success factors for the MDM system: Well defined business case, data management and monitoring, data models and structures defined and maintained, customer and supplier data governance, delivery and quality, commitment, and continuous communication with business. Technical requirements emerged several times during the thesis and therefore those can’t be ignored in the project. Conclusions chapter goes through these factors on a general level. The success factors and technical requirements are related to the essentials of MDM: Governance, Action and Quality. This chapter could be used as guidance in a master data management project.