Timing of Capacity Change: Models for Capital Intensive Industry

The suitable timing of capacity investments is a remarkable issue especially in capital intensive industries. Despite its importance, fairly few studies have been published on the topic. In the present study models for the timing of capacity change in capital intensive industry are developed. The study considers mainly the optimal timing of single capacity changes. The review of earlier research describes connections between cost, capacity and timing literature, and empirical examples are used to describe the starting point of the study and to test the developed models. The study includes four models, which describe the timing question from different perspectives. The first model, which minimizes unit costs, has been built for capacity expansion and replacement situations. It is shown that the optimal timing of an investment can be presented with the capacity and cost advantage ratios. After the unit cost minimization model the view is extended to the direction of profit maximization. The second model states that early investments are preferable if the change of fixed costs is small compared to the change of the contribution margin. The third model is a numerical discounted cash flow model, which emphasizes the roles of start-up time, capacity utilization rate and value of waiting as drivers of the profitable timing of a project. The last model expands the view from project level to company level and connects the flexibility of assets and cost structures to the timing problem. The main results of the research are the solutions of the models and analysis or simulations done with the models. The relevance and applicability of the results are verified by evaluating the logic of the models and by numerical cases.

Modeling competencies and capabilities in knowledge intensive business environment

Tämän diplomityön päämääränä oli tutkia Perloksen teknologiaosaamisia. Perloksen tavoitteena on tulevaisuudessa yhdistää ja soveltaa uusia teknologioita ja älykkäitä materiaaleja muovimekaniikkaan.Ideana oli mallintaa Perloksen osaamisia ja osaamisgapeja ottaen huomioon heidän tulevaisuuden visionsa. Projektituotteena osaamisten mallintamisessa oli Perlos Healthcaren asiakkaan analysoiva mittauslaite. Tutkimuksen arvo on huomattava sillä tunnistamalla osaamisensa ja kyvykkyytensä yritys pystyy luomaan paremman tarjooman vastatessaan koko ajan kasvaviin asiakasvaatimuksiin. Tutkimus on osa TEKESin rahoittamaa LIIMA -projektia. Työn ensimmäisessä osassa esitellään osaamiseen ja partneroitumiseen liittyviä teorioita. Osaamisten mallintaminen tehtiin Excel -pohjaisella työkalulla. Se sisältää projektituotteeseen liittyen osaamisriippuvuuksien mallintamisen ja gap -analyysin. Yhtenä tutkimusmetodina käytettiin haastattelututkimusta. Työ ja sen tulokset antavat operatiivista hyötyä teknologioiden ja markkinoiden välisessä kentässä.

On the innovation capacity of technologyrelated knowledge-intensive business services. A case study of the technology and engineering consulting (TEC) sector in Singapore

Even though the research on innovation in services has expanded remarkably especially during the past two decades, there is still a need to increase understanding on the special characteristics of service innovation. In addition to studying innovation in service companies and industries, research has also recently focused more on services in innovation, as especially the significance of so-called knowledge intensive business services (KIBS) for the competitive edge of their clients, othercompanies, regions and even nations has been proved in several previous studies. This study focuses on studying technology-based KIBS firms, and technology andengineering consulting (TEC) sector in particular. These firms have multiple roles in innovation systems, and thus, there is also a need for in-depth studies that increase knowledge about the types and dimensions of service innovations as well as underlying mechanisms and procedures which make the innovations successful. The main aim of this study is to generate new knowledge in the fragmented research field of service innovation management by recognizing the different typesof innovations in TEC services and some of the enablers of and barriers to innovation capacity in the field, especially from the knowledge management perspective. The study also aims to shed light on some of the existing routines and new constructions needed for enhancing service innovation and knowledge processing activities in KIBS companies of the TEC sector. The main samples of data in this research include literature reviews and public data sources, and a qualitative research approach with exploratory case studies conducted with the help of the interviews at technology consulting companies in Singapore in 2006. These complement the qualitative interview data gathered previously in Finland during a larger research project in the years 2004-2005. The data is also supplemented by a survey conducted in Singapore. The respondents for the survey by Tan (2007) were technology consulting companies who operate in the Singapore region. The purpose ofthe quantitative part of the study was to validate and further examine specificaspects such as the influence of knowledge management activities on innovativeness and different types of service innovations, in which the technology consultancies are involved. Singapore is known as a South-east Asian knowledge hub and is thus a significant research area where several multinational knowledge-intensive service firms operate. Typically, the service innovations identified in the studied TEC firms were formed by several dimensions of innovations. In addition to technological aspects, innovations were, for instance, related to new client interfaces and service delivery processes. The main enablers of and barriers to innovation seem to be partly similar in Singaporean firms as compared to the earlier study of Finnish TEC firms. Empirical studies also brought forth the significance of various sources of knowledge and knowledge processing activities as themain driving forces of service innovation in technology-related KIBS firms. A framework was also developed to study the effect of knowledge processing capabilities as well as some moderators on the innovativeness of TEC firms. Especially efficient knowledge acquisition and environmental dynamism seem to influence the innovativeness of TEC firms positively. The results of the study also contributeto the present service innovation literature by focusing more on 'innovation within KIBs' rather than 'innovation through KIBS', which has been the typical viewpoint stressed in the previous literature. Additionally, the study provides several possibilities for further research.

Engendering Group Support Based Foresight for Capital Intensive Manufacturing Industries - Case Paper and Steel Industry Scenarios by 2018

In recent times of global turmoil, the need for uncertainty management has become ever momentous. The need for enhanced foresight especially concerns capital-intensive industries, which need to commit their resources and assets with long-term planning horizons. Scenario planning has been acknowledged to have many virtues - and limitations - concerning the mapping of the future and illustrating the alternative development paths. The present study has been initiated to address both the need of improved foresight in two capital-intensive industries, i.e. the paper and steel industries and the imperfections in the current scenario practice. The research problem has been approached by engendering a problem-solving vehicle, which combines, e.g. elements of generic scenario process, face-to-face group support methods, deductive scenario reasoning and causal mapping into a fully integrated scenario process. The process, called the SAGES scenario framework, has been empirically tested by creating alternative futures for two capital-intensive industries, i.e. the paper and steel industries. Three scenarios for each industry have been engendered together with the identification of the key megatrends, the most important foreign investment determinants, key future drivers and leading indicators for the materialisation of the scenarios. The empirical results revealed a two-fold outlook for the paper industry, while the steel industry future was seen as much more positive. The research found support for utilising group support systems in scenario and strategic planning context with some limitations. Key perceived benefits include high time-efficiency, productivity and lower resource-intensiveness. Group support also seems to enhance participant satisfaction, encourage innovative thinking and provide the users with personalised qualitative scenarios.

Success of service-intensive manufacturing firms - resource-based view

The main objective of this study is to examine the relationships between resources, competitive advantage and firm success. The study focuses, on one hand, on the financial performance of service-intensive manufac-turing firms against competitors with a lower service intensity and, on the other hand, on the resources as drivers for competitive advantage and success. The purpose of the theoretical part is to link the study in the field of the strategy research. The empirical part of the study is based on the quantitative analyses of the survey data collected from 50 major suppliers of industrial machinery and transportation equipment in Europe and North America. Results indicate that service-intensive manufacturing firms have performed better and their performance has been more stable vis-à-vis their peers. The main resources that differentiate service-intensive manufacturing firms from their non-service intensive competitors are service strategy and service-oriented top management. The analyses on the VRIO resources produced only a limited amount of information and solely service-centred culture appeared to be a rent generating resource.

Customer-related skills and capabilities in knowledge-intensive business services

The roles of knowledge and customer involvement form distinct features in providing knowledge-intensive business services. The objective of this study was to investigate the customer-related skills and capabilities of knowledge-intensive business services. The research was carried out as case study, involving two polar cases. The other case represented customized services, and the other standardized services. The research method was qualitative, and included focus group workshops, individual interviews and a survey. The capabilities of business services have been mainly studied on organizational level. This study provides valuable insight into the role of individual skills as a part of capabilities of knowledge-intensive business services. According to this study, the most important capabilities are related to acquiring and integrating of knowledge, resource management, managing the customer’s role as a co-producer of the service, and active and effective communication. The study indicates that the level of tacit knowledge is high in the needed individual skills. Based on the study, the needed capabilities and skills are affected by the level of customization of the service, the demand for customer knowledge, the demand for consultation and the stage of the service providing.

Observations on the Pharmacokinetics and Pharmacodynamics of Dexmedetomidine. Clinical Studies on Healthy Volunteers and Intensive Care Patients

Patients treated in intensive care units require sedation and analgesia. However, sedative drugs also have potential adverse effects, and there is no single ideal sedativeanalgesic drug for these patients. Dexmedetomidine is an apha2-adrenoceptor agonist licenced for sedation of intensive care patients and patients undergoing surgery and other invasive procedures. Several routes of parenteral administration (intravenous, intramuscular, subcutaneous and intranasal) have been utilized. In the present series of studies, the pharmacokinetics and pharmacodynamics of intranasally administered dexmedetomidine as well as the gastrointestinal effects of intravenous dexmedetomidine were determined in healthy volunteers. Pharmacokinetics of dexmedetomidine during long lasting, high-dose infusions were characterized in intensive care patients. The bioavailability of intranasal dexmedetomidine was relatively good (65%), but interindividual variation was large. Dexmedetomidine significantly inhibited gastric emptying and gastrointestinal transit. In intensive care patients, the elimination half-life of dexmedetomidine was somewhat longer than reported for infusions of shorter duration and in less ill patients or healthy volunteers. Dexmedetomidine appeared to have linear pharmacokinetics up to the studied dose rate of 2.5 μg/kg/h. Dexmedetomidine clearance was decreasing with age and its volume of distribution was increased in hypoalbuminaemic patients, resulting in a longer elimination half-life and context-sensitive half-time. Intranasally administered dexmedetomidine was efficacious and well tolerated, making it appropriate for clinical situations requiring light sedation. The clinical significance of the gastrointestinal inhibitory effects of dexmedetomidine should be further evaluated in intensive care patients. The possibility of potentially altered potency and effect duration should be taken into account when administering dexmedetomidine to elderly or hypoalbuminaemic patients.

Competence in intensive and critical care nursing - development of a basic assessment scale for graduating nursing students

Intensive and critical care nursing is a speciality in its own right and with its own nature within the nursing profession. This speciality poses its own demands for nursing competencies. Intensive and critical care nursing is focused on severely ill patients and their significant others. The patients are comprehensively cared for, constantly monitored and their vital functions are sustained artificially. The main goal is to win time to cure the cause of the patient’s situation or illness. The purpose of this empirical study was i) to describe and define competence and competence requirements in intensive and critical care nursing, ii) to develop a basic measurement scale for competence assessment in intensive and critical care nursing for graduating nursing students, and iii) to describe and evaluate graduating nursing students’ basic competence in intensive and critical care nursing by seeking the reference basis of self-evaluated basic competence in intensive and critical care nursing from ICU nurses. However, the main focus of this study was on the outcomes of nursing education in this nursing speciality. The study was carried out in different phases: basic exploration of competence (phase 1 and 2), instrumentation of competence (phase 3) and evaluation of competence (phase 4). Phase 1 (n=130) evaluated graduating nursing students’ basic biological and physiological knowledge and skills for working in intensive and critical care with Basic Knowledge Assessment Tool version 5 (BKAT-5, Toth 2012). Phase 2 focused on defining competence in intensive and critical care nursing with the help of literature review (n=45 empirical studies) as well as competence requirements in intensive and critical care nursing with the help of experts (n=45 experts) in a Delphi study. In phase 3 the scale Intensive and Critical Care Nursing Competence Scale (ICCN-CS) was developed and tested twice (pilot test 1: n=18 students and n=12 nurses; pilot test 2: n=56 students and n=54 nurses). Finally, in phase 4, graduating nursing students’ competence was evaluated with ICCN-CS and BKAT version 7 (Toth 2012). In order to develop a valid assessment scale of competence for graduating nursing students and to evaluate and establish the competence of graduating nursing students, empirical data were retrieved at the same time from both graduating nursing students (n=139) and ICU nurses (n=431). Competence can be divided into clinical and general professional competence. It can be defined as a specific knowledge base, skill base, attitude and value base and experience base of nursing and the personal base of an intensive and critical care nurse. Personal base was excluded in this self-evaluation based scale. The ICCN-CS-1 consists of 144 items (6 sum variables). Finally, it became evident that the experience base of competence is not a suitable sum variable in holistic intensive and critical care competence scale for graduating nursing students because of their minor experience in this special nursing area. ICCN-CS-1 is a reliable and tolerably valid scale for use among graduating nursing students and ICU nurses Among students, basic competence of intensive and critical care nursing was self-rated as good by 69%, as excellent by 25% and as moderate by 6%. However, graduating nursing students’ basic biological and physiological knowledge and skills for working in intensive and critical care were poor. The students rated their clinical and professional competence as good, and their knowledge base and skill base as moderate. They gave slightly higher ratings for their knowledge base than skill base. Differences in basic competence emerged between graduating nursing students and ICU nurses. The students’ self-ratings of both their basic competence and clinical and professional competence were significantly lower than the nurses’ ratings. The students’ self-ratings of their knowledge and skill base were also statistically significantly lower than nurses’ ratings. However, both groups reported the same attitude and value base, which was excellent. The strongest factor explaining students’ conception of their competence was their experience of autonomy in nursing. Conclusions: Competence in intensive and critical care nursing is a multidimensional concept. Basic competence in intensive and critical care nursing can be measured with self-evaluation based scale but alongside should be used an objective evaluation method. Graduating nursing students’ basic competence in intensive and critical care nursing is good but their knowledge and skill base are moderate. Especially the biological and physiological knowledge base is poor. Therefore in future in intensive and critical care nursing education should be focused on both strengthening students’ biological and physiological knowledge base and on strengthening their overall skill base. Practical implications are presented for nursing education, practice and administration. In future, research should focus on education methods and contents, mentoring of clinical practice and orientation programmes as well as further development of the scale.

SOCIAL MEDIA IN INTERNATIONAL BRAND COMMUNICATION OF SMES - A multiple case study of small Finnish design-intensive companies

Social media is a rather new phenomenon which has revolutionised the world of online communication. However, academic research on how companies can benefit from social media is lacking. The research objective of this thesis was to examine the use of social media in international brand communication of small Finnish design-intensive companies. Therefore, this research contributes also to the research gap in SME branding. The focus was on communication targeted at consumers. The research was carried out as a mixed methods research employing the questionnaire and multiple case study methods. The questionnaire was used to gather preliminary information on Finnish design-intensive companies and to provide an eligible list of companies for deeper examination. Then, four case companies were studied in more depth. The empirical evidence of the case companies was mainly gathered through theme interviews. The results of the questionnaire shed light on the internationalisation of small Finnish designintensive companies. On average, the companies had internationalised rather quickly after they had been founded. However, the share of exports was rather low in most of the companies. The results revealed also that social media was already used widely in the exporting companies and the use can be expected to grow in future. The findings of the multiple case study suggest that branding activities in small Finnish designintensive companies are constrained by limited resources and skills. In addition, the branding activities are strongly guided by the vision and values of the entrepreneur(s) rather than extensive marketing research. The brand structure was simple in all case companies and they aimed at having a standardised brand image across markets. However, all case companies had faced a need for some adaptation of their international brand communication. Internationally important brand communication channels were international fairs, the internet, word-of-mouth and social media. Social media offered a cost-effective brand communication channel for the case companies. It was used for various purposes, such as creating brand awareness and affecting how the brand is perceived. The entrepreneurs found the use of social media to be rather easy and the case companies had not faced any major challenges. However, the companies had recognised that communication in social media requires consistency and planning. The planning was rather informal and stayed on a general level. Overall, the utilisation of social media in the case companies was limited by a lack of resources. It seemed to affect especially the follow-up of brand communication in social media which stayed rather superficial.

Developing the measurement and management of knowledge: applying the constructive research approach in a knowledge intensive service environment

Intellectual assets have attained continuous attention in the academic field, as they are vital sources of competitive advantage and organizational performance in the contemporary knowledge intensive business environment. Intellectual capital measurement is quite thoroughly addressed in the accounting literature. However, the purpose of the measurement is to support the management of intellectual assets, but the reciprocal relationship between measurement and management has not been comprehensively considered in the literature. The theoretical motivation for this study rose from this paradox, as in order to maximise the effectiveness of knowledge management the two initiatives need to be closely integrated. The research approach of this interventionist case study is constructive. The objective is to develop the case organization’s knowledge management and intellectual capital measurement in a way that they would be closely integrated and the measurement would support the management of intellectual assets. The case analysis provides valuable practical considerations about the integration and related issues as the case company is a knowledge intensive organization in which the know-how of the employees is the central competitive asset and therefore, the management and measurement of knowledge are essential for its future success. The results suggest that the case organization is confronting challenges in managing knowledge. In order to appropriately manage knowledge processes and control the related risks, support from intellectual capital measurement is required. However, challenges in measuring intellectual capital, especially knowledge, could be recognized in the organization. By reflecting the knowledge management situation and the constructed strategy map, a new intellectual measurement system was developed for the case organization. The construction of the system as well as its indicators can be perceived to contribute to the literature, emphasizing of the importance of properly considering the organization’s knowledge situation in developing an intellectual capital measurement system.

Immediate Decision-Making and Information Needs in Intensive Care Coordination

The aim of this study was to develop a theoretical model for information integration to support the deci¬sion making of intensive care charge nurses, and physicians in charge – that is, ICU shift leaders. The study focused on the ad hoc decision-making and immediate information needs of shift leaders during the management of an intensive care unit’s (ICU) daily activities. The term ‘ad hoc decision-making’ was defined as critical judgements that are needed for a specific purpose at a precise moment with the goal of ensuring instant and adequate patient care and a fluent flow of ICU activities. Data collection and research analysis methods were tested in the identification of ICU shift leaders’ ad hoc decision-making. Decision-making of ICU charge nurses (n = 12) and physicians in charge (n = 8) was observed using a think-aloud technique in two university-affiliated Finnish ICUs for adults. The ad hoc decisions of ICU shift leaders were identified using an application of protocol analysis. In the next phase, a structured online question¬naire was developed to evaluate the immediate information needs of ICU shift leaders. A national survey was conducted in all Finnish, university-affiliated hospital ICUs for adults (n = 17). The questionnaire was sent to all charge nurses (n = 515) and physicians in charge (n = 223). Altogether, 257 charge nurses (50%) and 96 physicians in charge (43%) responded to the survey. The survey was also tested internationally in 16 Greek ICUs. From Greece, 50 charge nurses out of 240 (21%) responded to the survey. A think-aloud technique and protocol analysis were found to be applicable for the identification of the ad hoc decision-making of ICU shift leaders. During one day shift leaders made over 200 ad hoc decisions. Ad hoc decisions were made horizontally, related to the whole intensive care process, and vertically, concerning single intensive care incidents. Most of the ICU shift leaders’ ad hoc decisions were related to human resources and know-how, patient information and vital signs, and special treatments. Commonly, this ad hoc decision-making involved several multiprofessional decisions that constituted a bundle of immediate decisions and various information needs. Some of these immediate information needs were shared between the charge nurses and the physicians in charge. The majority of which concerned patient admission, the organisation and management of work, and staff allocation. In general, the information needs of charge nurses were more varied than those of physicians. It was found that many ad hoc deci-sions made by the physicians in charge produced several information needs for ICU charge nurses. This meant that before the task at hand was completed, various kinds of information was sought by the charge nurses to support the decision-making process. Most of the immediate information needs of charge nurses were related to the organisation and management of work and human resources, whereas the information needs of the physicians in charge mainly concerned direct patient care. Thus, information needs differ between professionals even if the goal of decision-making is the same. The results of the international survey confirmed these study results for charge nurses. Both in Finland and in Greece the information needs of charge nurses focused on the organisation and management of work and human resources. Many of the most crucial information needs of Finnish and Greek ICU charge nurses were common. In conclusion, it was found that ICU shift leaders make hundreds of ad hoc decisions during the course of a day related to the allocation of resources and organisation of patient care. The ad hoc decision-making of ICU shift leaders is a complex multi-professional process, which requires a lot of immediate information. Real-time support for information related to patient admission, the organisation and man¬agement of work, and allocation of staff resources is especially needed. The preliminary information integration model can be applied when real-time enterprise resource planning systems are developed for intensive care daily management

Capital Structure and Firm Growth: R&D Intensive Companies

The purpose of this study is to examine and explain firm`s growth impact on capital structure decision-making in research and development intensive companies. Many studies claim that R&D has a pivotal impact on capital structure decisions, but corporate finance theories have often failed to explain these observed patterns. As sales growth is an important concept and objective for R&D firms, it is logical to assume that it plays a vital role in capital structure decisions. This study applies nomothetic research approach. The theoretical part employs a formal conceptual analysis in order to develop the propositions that are tested with empirical data. The empirical part consists of the analysis of three companies; the data is obtained from the annual reports over the period 2003 – 2008. The companies operate in IT- or ICT-industry and are publicly listed. The method for analyzing the case data is based on the financial indicators, which are obtained from the financials of the case companies. These economic indicators describe the capital structure and the financial decision-making of the firms. The method relates to the quantitative studies. Yet, this study extends the analysis beyond the indicators. Specifically, this study addresses the question of what is behind the economic indicators, therefore combining aspects of quantitative and qualitative analysis. The firms examined in this study seem to prefer internal finance during growth. However, external finance seems to be a catalyst for sales growth. Firms strongly prefer equity financing. In growth, the use of equity per capital either increases or stays in a constant level. Over the period 2003 – 2008, the firms were often associated to equity related transactions and short-term debt. Short-term debt was used as a substitute of long-term debt and equity. The case firms also adjusted their capital structure – these adjustments were carried out with short-term debt or equity. The case data also provides implications for the growth signal theory that was developed in this study. Based on the econometric indicators, arguments can be made that equity investors are `attracted` to growing R&D firms. This is because growth helps investors perceive the true type of firm. The findings of this study are best explained by the trade-off theory and the pecking order theory. These corporate finance theories are considered as mainstream. Little support can be found to the implications of the signaling theory and market timing theory.

The role of customer perspective in organizational renewal. A comparative case study of knowledge-intensive business services.

The objective of this thesis was to study organizational renewal from the customer orientation perspective. Customer orientation is divided into customer relationship management and customer knowledge, which both are important components of customer related organizational renewal capabilities. The study was conducted in knowledge intensive business service firms, which are required to renew their strategy, operations and processes constantly in order to gain and sustain competitive advantage. In the empirical research, two companies were studied, both offering services to their customers. The analysis was done in two phases; first each case was analyzed individually and then the cases were compared in a cross-case analysis. The most important finding was that customer orientation is considered important but it is not being utilized for organizational renewal in full capacity.

Balancing creativity and risk intelligence in professional knowledge-intensive business services

The main strengths of professional knowledge-intensive business services (P-KIBS) are knowledge and creativity which needs to be fostered, maintained and supported. The process of managing P-KIBS companies deals with financial, operational and strategic risks. That is why it is reasonable to apply risk management techniques and frameworks in this context. A significant challenge hides in choosing reasonable ways of implementing risk management, which will not limit creative ability in organization, and furthermore will contribute to the process. This choice is related to a risk intelligent approach which becomes a justified way of finding the required balance. On a theoretical level the field of managing both creativity and risk intelligence as a balanced process remains understudied in particular within KIBS industry. For instance, there appears to be a wide range of separate models for innovation and risk management, but very little discussion in terms of trying to find the right balance between them. This study aims to shed light on the importance of well-managed combination of these concepts. The research purpose of the present study is to find out how the balance between creativity and risk intelligence can be managed in P-KIBS. The methodological approach utilized in the study is strictly conceptual without empirical aspects. The research purpose can be achieved through answering the following research supporting questions: 1. What are the characteristics and role of creativity as a component of innovation process in a P-KIBS company? 2. What are the characteristics and role of risk intelligence as an approach towards risk management process implementation in a P-KIBS company? 3. How can risk intelligence and creativity be balanced in P-KIBS? The main theoretical contribution of the study conceals in a proposed creativity and risk intelligence stage process framework. It is designed as an algorithm that can be applied on organizational canvas. It consists of several distinct stages specified by actors involved, their roles and implications. Additional stage-wise description provides detailed tasks for each of the enterprise levels, while combining strategies into one. The insights driven from the framework can be utilized by a vast range of specialists from strategists to risk managers, and from innovation managers to entrepreneurs. Any business that is designing and delivering knowledge service can potentially gain valuable thoughts and expand conceptual understanding from the present report. Risk intelligence in the current study is a unique way of emphasizing the role of creativity in professional knowledge-intensive industry and a worthy technique for making profound decisions towards risks.