A novel procedure for establishing clinching parameters for high strength steel sheet

The building industry has a particular interest in using clinching as a joining method for frame constructions of light-frame housing. Normally many clinch joints are required in joining of frames.In order to maximise the strength of the complete assembly, each clinch joint must be as sound as possible. Experimental testing is the main means of optimising a particular clinch joint. This includes shear strength testing and visual observation of joint cross-sections. The manufacturers of clinching equipment normally perform such experimental trials. Finite element analysis can also be used to optimise the tool geometry and the process parameter, X, which represents the thickness of the base of the joint. However, such procedures require dedicated software, a skilled operator, and test specimens in order to verify the finite element model. In addition, when using current technology several hours' computing time may be necessary. The objective of the study was to develop a simple calculation procedure for rapidly establishing an optimum value for the parameter X for a given tool combination. It should be possible to use the procedure on a daily basis, without stringent demands on the skill of the operator or the equipment. It is also desirable that the procedure would significantly decrease thenumber of shear strength tests required for verification. The experimental workinvolved tests in order to obtain an understanding of the behaviour of the sheets during clinching. The most notable observation concerned the stage of the process in which the upper sheet was initially bent, after which the deformation mechanism changed to shearing and elongation. The amount of deformation was measured relative to the original location of the upper sheet, and characterised as the C-measure. By understanding in detail the behaviour of the upper sheet, it waspossible to estimate a bending line function for the surface of the upper sheet. A procedure was developed, which makes it possible to estimate the process parameter X for each tool combination with a fixed die. The procedure is based on equating the volume of material on the punch side with the volume of the die. Detailed information concerning the behaviour of material on the punch side is required, assuming that the volume of die does not change during the process. The procedure was applied to shear strength testing of a sample material. The sample material was continuously hot-dip zinc-coated high-strength constructional steel,with a nominal thickness of 1.0 mm. The minimum Rp0.2 proof stress was 637 N/mm2. Such material has not yet been used extensively in light-frame housing, and little has been published on clinching of the material. The performance of the material is therefore of particular interest. Companies that use clinching on a daily basis stand to gain the greatest benefit from the procedure. By understanding the behaviour of sheets in different cases, it is possible to use data at an early stage for adjusting and optimising the process. In particular, the functionality of common tools can be increased since it is possible to characterise the complete range of existing tools. The study increases and broadens the amount ofbasic information concerning the clinching process. New approaches and points of view are presented and used for generating new knowledge.

Implementation of Signaling Gateway between Telephone Network and the Internet

Tässä diplomityössä perehdytään verkkoelementiltä, joka yhdistää H.323, MEGACO- ja ISUP-protokollia käyttävät tietoliikenneverkot toisiinsa, vaadittaviin ominaisuuksiin ja toiminnallisuuksiin. Tyypillisesti tällaista toiminnallisuutta tarvitaan IP- ja PSTN-verkkojen yhdistämisessä. Tarkastelu aloitetaan kuvaamalla PSTN-verkon signalointi ja rakenne, jatketaan kuvaamalla internet-protokollia käyttävä verkkoympäristö ja lopuksi perehdytään verkkoelementiltä vaadittaviin toiminnallisuuksiin, jotta PSTN ja MEGACO-pohjaiset verkot toimivat yhteen. Työn käytännöllisenä osuutena kuvataan osa viestisekvenssikaavioista, joita verkkoelementti toteuttaa puuttumatta kuitenkaan eri protokollien toimintaan viestien parametrien tasolla.

Wavelet Filter Parameterization for Compression of Spectral Images

Vaatimus kuvatiedon tiivistämisestä on tullut entistä ilmeisemmäksi viimeisen kymmenen vuoden aikana kuvatietoon perustuvien sovellutusten myötä. Nykyisin kiinnitetään erityistä huomiota spektrikuviin, joiden tallettaminen ja siirto vaativat runsaasti levytilaa ja kaistaa. Aallokemuunnos on osoittautunut hyväksi ratkaisuksi häviöllisessä tiedontiivistämisessä. Sen toteutus alikaistakoodauksessa perustuu aallokesuodattimiin ja ongelmana on sopivan aallokesuodattimen valinta erilaisille tiivistettäville kuville. Tässä työssä esitetään katsaus tiivistysmenetelmiin, jotka perustuvat aallokemuunnokseen. Ortogonaalisten suodattimien määritys parametrisoimalla on työn painopisteenä. Työssä todetaan myös kahden erilaisen lähestymistavan samanlaisuus algebrallisten yhtälöiden avulla. Kokeellinen osa sisältää joukon testejä, joilla perustellaan parametrisoinnin tarvetta. Erilaisille kuville tarvitaan erilaisia suodattimia sekä erilaiset tiivistyskertoimet saavutetaan eri suodattimilla. Lopuksi toteutetaan spektrikuvien tiivistys aallokemuunnoksen avulla.

The effects of ICT on school: teachers’ and students’ perspectives

The purpose of this study was to investigate the effects of information and communication technology (ICT) on school from teachers’ and students’ perspectives. The focus was on three main subject matters: on ICT use and competence, on teacher and school community, and on learning environment and teaching practices. The study is closely connected to the national educational policy which has aimed strongly at supporting the implementation of ICT in pedagogical practices at all institutional levels. The phenomena were investigated using a mixed methods approach. The qualitative data from three cases studies and the quantitative data from three statistical studies were combined. In this study, mixed methods were used to investigate the complex phenomena from various stakeholders’ points of view, and to support validation by combining different perspectives in order to give a fuller and more complete picture of the phenomena. The data were used in a complementary manner. The results indicate that the technical resources for using ICT both at school and at homes are very good. In general, students are capable and motivated users of new technology; these skills and attitudes are mainly based on home resources and leisuretime use. Students have the skills to use new kinds of applications and new forms of technology, and their ICT skills are wide, although not necessarily adequate; the working habits might be ineffective and even wrong. Some students have a special kind of ICT-related adaptive expertise which develops in a beneficial interaction between school guidance and challenges, and individual interest and activity. Teachers’ skills are more heterogeneous. The large majority of teachers have sufficient skills for everyday and routine working practices, but many of them still have difficulties in finding a meaningful pedagogical use for technology. The intensive case study indicated that for the majority of teachers the intensive ICT projects offer a possibility for learning new skills and competences intertwined in the work, often also supported by external experts and a collaborative teacher community; a possibility that “ordinary” teachers usually do not have. Further, teachers’ good ICT competence help them to adopt new pedagogical practices and integrate ICT in a meaningful way. The genders differ in their use of and skills in ICT: males show better skills especially in purely technical issues also in schools and classrooms, whereas female students and younger female teachers use ICT in their ordinary practices quite naturally. With time, the technology has become less technical and its communication and creation affordances have become stronger, easier to use, more popular and motivating, all of which has increased female interest in the technology. There is a generation gap in ICT use and competence between teachers and students. This is apparent especially in the ICT-related pedagogical practices in the majority of schools. The new digital affordances not only replace some previous practices; the new functionalities change many of our existing conceptions, values, attitudes and practices. The very different conceptions that generations have about technology leads, in the worst case, to a digital gap in education; the technology used in school is boring and ineffective compared to the ICT use outside school, and it does not provide the competence needed for using advanced technology in learning. The results indicate that in schools which have special ICT projects (“ICT pilot schools”) for improving pedagogy, these have led to true changes in teaching practices. Many teachers adopted student-centred and collaborative, inquiry-oriented teaching practices as well as practices that supported students' authentic activities, independent work, knowledge building, and students' responsibility. This is, indeed, strongly dependent on the ICT-related pedagogical competence of the teacher. However, the daily practices of some teachers still reflected a rather traditional teacher-centred approach. As a matter of fact, very few teachers ever represented solely, e.g. the knowledge building approach; teachers used various approaches or mixed them, based on the situation, teaching and learning goals, and on their pedagogical and technical competence. In general, changes towards pedagogical improvements even in wellorganised developmental projects are slow. As a result, there are two kinds of ICT stories: successful “ICT pilot schools” with pedagogical innovations related to ICT and with school community level agreement about the visions and aims, and “ordinary schools”, which have no particular interest in or external support for using ICT for improvement, and in which ICT is used in a more routine way, and as a tool for individual teachers, not for the school community.

Outsourcing Challenges in Russia

The study focuses on the key factors in outsourcing from the viewpoint of manufacturing companies operating in Russia. The goal has been to give an overview of the different kinds of challenges companies might face in the case of outsourcing. Of particular interest are the possible risks which might originate from the subcontract relationship, as well as managing these risks. The empirical material for this qualitative interview study was collected from three large-scale manufacturing companies operating in food industry in Russia. Two of the interviewed companies were local Russian actors, and one was an international firm. According to the respondents, a big challenge is to find a suitable supplier in the Russian markets. If there are suppliers available, they may often not be capable of operating as outsourcing partners. The most common problems faced with suppliers are unstable quality and arbitrary pricing. Whether the suppliers are capable to offer activities which satisfy the company’s own and the end customers’ requirements, seems to be the biggest concern in the interviewed companies. This quality risk is managed by the strategy of multiple sourcing. Single sourcing is seen as an impossible option. The interviewed companies have no organised risk management with their external suppliers.

Literature review on permanent magnet generators design and dynamic behavior

This paper is a literature review which describes the construction of state of the art of permanent magnet generators and motors constructing and discusses the current and possible application of these machines in industry. Permanent magnet machines are a well-know class of rotating and linear electric machines used for many years in industrial applications. A particular interest for permanent magnet generators is connected with wind mills, which seem to be becoming increasingly popular nowadays. Geared and direct-driven permanent magnet generators are described. A classification of direct-driven permanent magnet generators is given. Design aspects of permanent magnet generators are presented. Permanent magnet generators for wind turbines designs are highlighted. Dynamics and vibration problems of permanent magnet generators covered in literature are presented. The application of the Finite Element Method for mechanical problems solution in the field of permanent magnet generators is discussed.

Menestyksekkäät yliopistopelin pelaajat? Tutkimus nopeasti ja nuorena valmistumisesta

Succestul players of the university game? A study about the short duration of master’s degree studies and graduating at a young age The duration of studies has long been a topic of conversation. It was first mentioned in 1883, but the discussion has been quite active and topical for the last fifty years. During that time, there have been numerous committees, working groups for the Ministry of Education, and revisions to the structure of the master’s degree program. All of these have focused on lowering the duration of studies as well as the age at which students graduate. These two factors have been regarded as indicators of efficiency. Achieving these goals is seen to promote the successful transition from studies to work. In addition, the greater time that people spend working is thought to help with the fiscal burden of an aging population. The reasons for prolonged study seem to be: students working during the course of their studies; the actual workload of the studies, which sometimes does not correlate with the calculated workload; problems with the students’ course selections and with their financial support from the government; issues in teaching; and problems with university funding. This study focuses on students’ study experiences, their progress, and the university itself. Of particular interest was the students’ use of different resources—cultural, social, and economical capital. Participants in the study had graduated from the University of Turku between the years of 1999 and 2001 and were divided into two groups: prompt graduates, those who graduated among the fastest 18th percent in their faculty; and those who graduated at a slower pace. A survey (N=499) and interviews (N=69) were among the methods used, along with a compilation of statistics on the students’ duration of studies, the number of modules studied, and marks obtained. Bourdieu’s theory about fields and the games people play in those fields formed the theoretical background of this study. The university was seen to form a playing field with historically and politically changeable rules. The students playing in this field were considered to possess different economical, social, and cultural resources, which they use more or less successfully. Some of the strategies used by students result in gra¬duating at a young age and/or a short duration of study; some do not. This study divided the age of graduation and the duration of study into separate games. This allowed the study to determine the relationship between these two factors and to examine their similarities and differences. The study also focused on the idea of success. Short duration of studies and a young graduation age can be considered, be some, an indication of success in navigating the university field. This study aimed to see if this concept held true or whether these seeming indicators of success have negative side effects. The main result of this study is that, even though the games of duration and age have similarities, they are sufficiently diverse to be considered separate games, which need different resources. To graduate with a short duration of studies, it is important for a student to successfully view and navigate the university field, tailoring one’s studies and extracurricular activities to suit the individual. In the game of youth, the background of the student seemed to be of greater importance. The youngest graduates had spent more time with their parents, who also had higher educational qualifications. They also had higher achievement in their previous studies. This seems to indicate that their background allowed them to assimilate a better understanding of the school and university fields and that playing the university game was natural for them. As for the aspect of success, it seems that there are many ways to define the term. Youth on graduation and short duration of studies can be seen as two indicators of success. Both revealed negative and positive outcomes, even though short duration of studies seemed more often to be connected with positive outcomes. However, it seems that the best indicator for success is the way in which students organize study into their lives to support and suit their needs and abilities to realize a meaningful life and a successful entry into the field of work.

The molecular mechanisms and evolutionary significance of plumage colour variation in pied flycatchers (Ficedula hypoleuca)

A common feature of natural populations is that individuals differ in morphology, physiologyand behavior (i.e .phenotype). A thorough understanding of the molecular mechanisms and evolutionary forces behind this phenotypic variation is a prerequisite for understanding evolution.This thesis examines the molecular mechanism and the roles of the different evolutionary forces in plumage colour variation in pied flycatchers (Ficedulahypoleuca). Malepied flycatchers exhibit marked variation in both pigmentary and structural plumage colourand the trait has repeatedly been suggested to be of adaptive significance. An examination of plumage colour variation on reproductive output trevealed that structural colouration, and more specifically the degree of ultraviolet (UV) reflectance had an effect on number of young sired. Paternity analyses of breeding males revealed that males that had been cuckolded by their social mate tended to be less UV reflectant than males that had not been cuckolded.Neither pigment-based norstructural colouration was found to affect the probability of siring young in other nests. Phenotypic differentiation was found to be markedly greater than differentiation at neutralgenetic markers across the pied flycatcher breeding range. Furthermore patterns of differentiationin phenotypes and selectively neutral genes were not uniform. Outlier tests searching for genomic footprints of selection revealed elevated levels of genetic divergence in a gene associated with feather development (and thus potentially structural colouration) and ultraviolet vision. Th eobserved differentiation in allelic frequencies was particularly pronounced in the Spanish piedflycatcher populations. Examining gene expression during feather development indicated that the TYRP1 gene (known to be involved in the production of black pigment) may be relevant in generating phenotypic variation in pied flycatcher plumage. Also, energy homeostasis related genesfeatured prominently among the genes found to be expressed in one extreme phenotype but not the other. This is of particular interest in light of what is known about the pleiotropy ofthe melanocortin system which underlies brown-black pigment production. The melanocortinsystem is also associated with energy homeostasis (among a number of other physiological functions) and thus the results could be pointing to the signalling function of brown-blackplumage. Plumage colour variation in pied flycatchers, both structural and pigmentary, can thus beconcluded to be exhibiting signals of non-neutral evolution. Structural colouration was found to play a role in sexual selection and putative signals of selection were further detected in acandidate gene for this trait. Evidence for non-neutral evolution of pigmentary colouration was also detected. These findings, together with the fact that preliminary evidence for an energy balance associated signalling function for plumage was found, present good starting points for further investigations into the meaning and mechanisms of plumage colour variation in piedflycatchers.

On convergence of transforms based on parabolic scaling

This thesis studies properties of transforms based on parabolic scaling, like Curvelet-, Contourlet-, Shearlet- and Hart-Smith-transform. Essentially, two di erent questions are considered: How these transforms can characterize H older regularity and how non-linear approximation of a piecewise smooth function converges. In study of Hölder regularities, several theorems that relate regularity of a function f : R2 → R to decay properties of its transform are presented. Of particular interest is the case where a function has lower regularity along some line segment than elsewhere. Theorems that give estimates for direction and location of this line, and regularity of the function are presented. Numerical demonstrations suggest also that similar theorems would hold for more general shape of segment of low regularity. Theorems related to uniform and pointwise Hölder regularity are presented as well. Although none of the theorems presented give full characterization of regularity, the su cient and necessary conditions are very similar. Another theme of the thesis is the study of convergence of non-linear M ─term approximation of functions that have discontinuous on some curves and otherwise are smooth. With particular smoothness assumptions, it is well known that squared L2 approximation error is O(M-2(logM)3) for curvelet, shearlet or contourlet bases. Here it is shown that assuming higher smoothness properties, the log-factor can be removed, even if the function still is discontinuous.

Siirtymätalouksien tutkimuslaitoksen (BOFIT) kokoelma

Suomen Pankin kirjastolla on erilliskokoelma Siirtymätalouksien tutkimuslaitoksessa, BOFITissa. Kokoelma on painottunut siirtymätalouksia käsittelevään tieteelliseen kirjallisuuteen, tilasto- ja kausijulkaisuihin. Kokoelmaa on kartutettu 1980-luvulta lähtien ja siihen sisältyy merkittävä määrä nimekkeitä, joita ei ole hankittu muihin suomalaisiin kirjastoihin. Kokoelmaa on rajattu sekä aihepiireiltään että maantieteellisesti kulloistenkin tutkimuspainopisteiden mukaisesti. Kokoelman keskeinen aihealue on makrotalous ja erityisinä painopisteinä ovat rahatalous, talouspolitiikka ja talousuudistukset. Paljon kirjallisuutta löytyy myös raha- ja valuuttapolitiikasta, pankkitoiminnasta ja kansainvälisistä taloussuhteista. Maantieteellisinä painopisteinä ovat tällä hetkellä erityisesti Venäjä ja Kiina. Vanhempaa aineistoa löytyy myös Baltian sekä Itä-Euroopan maista, Neuvostoliitosta sekä Suomen idänkaupasta. Kirjakokoelma sisältää n. 5300 nimekettä, lehtikokoelma n. 150 nimekettä. Artikkeliviitteitä löytyy n. 2300 vuodesta 1990 lähtien. Kokoelma sisältää tiedot myös kaikesta BOFITin omasta julkaisutuotannosta. Suurin osa kokoelmasta on englanninkielistä.

Porous silicon optical filters in gas sensing applications

In this thesis, the gas sensing properties of porous silicon-based thin-film optical filters are explored. The effects of surface chemistry on the adsorption and desorption of various gases are studied in detail. Special emphasis is placed on investigating thermal carbonization as a stabilization method for optical sensing applications. Moreover, the possibility of utilizing the increased electrical conductivity of thermally carbonized porous silicon for implementing a multiparametric gas sensor, which would enable simultaneous monitoring of electrical and optical parameters, is investigated. In addition, different porous silicon-based optical filter-structures are prepared, and their properties in sensing applications are evaluated and compared. First and foremost, thermal carbonization is established as a viable method to stabilize porous silicon optical filters for chemical sensing applications. Furthermore, a multiparametric sensor, which can be used for increasing selectivity in gas sensing, is also demonstrated. Methods to improve spectral quality in multistopband mesoporous silicon rugate filters are studied, and structural effects to gas sorption kinetics are evaluated. Finally, the stability of thermally carbonized optical filters in basic environments is found to be superior in comparison to other surface chemistries currently available for porous silicon. The results presented in this thesis are of particular interest for developing novel reliable sensing systems based on porous silicon, e.g., label-free optical biosensors.

Julkisten tukitoimien vaikutus sähköautojen yleistymiseen

Tässä kandidaatintyössä tutkittiin julkisten toimijoiden asettamia sähköautojen yleistymistavoitteita kymmenessä maassa. Tutkimus toteutettiin kirjallisuusselvityksenä. Tavoitteena oli selvittää sähköautojen yleistymiseen vaikuttavia tekijöitä. Erityisenä kiinnostuksen kohteena olivat julkishallintojen sähköauton hankintaan kohdistamat kannustimet eri maissa ja se, onko kannustimien voimakkuudella havaittavissa olevaa vaikutusta sähköautojen yleistymiseen. Tutkimuksessa luotiin myös katsaus sähköautojen myyntiin ja yleistymisodotuksiin Suomessa ja verrattiin niitä muihin maihin. Tutkimuksessa havaittiin, että kannustimien voimakkuudella ei ole selvää yhteyttä sähköautojen yleistymiseen. On mahdollista, että kannustimet vaikuttavat positiivisesti sähköautojen myyntiin. Vaikuttavia tekijöitä on kuitenkin muitakin, ja niiden vaikutus voi olla suurempi kuin julkisten kannustimien. Suomessa sähköautojen myynti on samassa suuruusluokassa kuin Keski-Euroopassa, mutta merkittävästi jäljessä muita Pohjoismaita. Myös kannustimien voimakkuudella mitattuna Suomi häviää muille Pohjoismaille ja lisäksi useille Euroopan maille. Voimakkaammat tukimuodot voisivat kasvattaa sähköautojen myyntiä Suomessa, mutta julkisen talouden alijäämäisyys ei luultavasti mahdollista nykyistä voimakkaampien tukien käyttöönottoa.

Recovery of biomass-derived valuable compounds using chromatographic and membrane separations

Utilization of biomass-based raw materials for the production of chemicals and materials is gaining an increasing interest. Due to the complex nature of biomass, a major challenge in its refining is the development of efficient fractionation and purification processes. Preparative chromatography and membrane filtration are selective, energy-efficient separation techniques which offer a great potential for biorefinery applications. Both of these techniques have been widely studied. On the other hand, only few process concepts that combine the two methods have been presented in the literature. The aim of this thesis was to find the possible synergetic effects provided by combining chromatographic and membrane separations, with a particular interest in biorefinery separation processes. Such knowledge could be used in the development of new, more efficient separation processes for isolating valuable compounds from complex feed solutions that are typical for the biorefinery environment. Separation techniques can be combined in various ways, from simple sequential coupling arrangements to fully-integrated hybrid processes. In this work, different types of combined separation processes as well as conventional chromatographic separation processes were studied for separating small molecules such as sugars and acids from biomass hydrolysates and spent pulping liquors. The combination of chromatographic and membrane separation was found capable of recovering high-purity products from complex solutions. For example, hydroxy acids of black liquor were successfully recovered using a novel multistep process based on ultrafiltration and size-exclusion chromatography. Unlike any other separation process earlier suggested for this challenging separation task, the new process concept does not require acidification pretreatment, and thus it could be more readily integrated into a pulp-mill biorefinery. In addition to the combined separation processes, steady-state recycling chromatography, which has earlier been studied for small-scale separations of high-value compounds only, was found a promising process alternative for biorefinery applications. In comparison to conventional batch chromatography, recycling chromatography provided higher product purity, increased the production rate and reduced the chemical consumption in the separation of monosaccharides from biomass hydrolysates. In addition, a significant further improvement in the process performance was obtained when a membrane filtration unit was integrated with recycling chromatography. In the light of the results of this work, separation processes based on combining membrane and chromatographic separations could be effectively applied for different biorefinery applications. The main challenge remains in the development of inexpensive separation materials which are resistant towards harsh process conditions and fouling.

„Und frei erklär' ich alle meine Knechte“ : Höflichkeit als Ausdruck sozialer Utopie in Schillers Drama Wilhelm Tell.

My dissertation is an interdisciplinary study of the relationship between the Swiss peasants and nobles in Friedrich Schiller’s play Wilhelm Tell (1804). Changes to this relationship are of particular interest. Communication in the play is examined via a micro-analysis based on Penelope Brown’s and Stephen C. Levinson’s theoretical framework Politeness: Some universals in language usage. (1978, 1987). Brown and Levinson distinguish between positivepoliteness and negative-politeness strategies and their distinction is useful for my argument, since they claim that the use of positive-politeness strategies reflects the speaker’s intention to minimize the distance between the interlocutors (Brown and Levinson 1987: 103). Negative-politeness strategies, by contrast, result in social distancing (Brown and Levinson 1987: 130). In accordance with Brown’s and Levinson’s theory, it can be argued that the distribution of positive-politeness and negative-politeness strategies reflects changes in the distance between the fictional interlocutors as representatives of their social classes in Wilhelm Tell. The analysis of the communication in the play highlights that existing conflicts within the social groups are resolved and replaced with solidarity (cf. ‘Claim ’common ground’ and ‘Claim in-group membership with H’) before the peasants and noblemen appear on stage simultaneously in III, 3. In the scene in question, Geßler forces Tell to shoot the apple off his son’s head. Although both nobles and peasants are present, they do not communicate with each other. Thus, communication between the social classes occurs for the first time in IV, 2. This scene is crucial with regard to the changes in the relationship between the social classes in the play. The younger generation, with Rudenz as a representative of the nobility and Melchthal as a representative of the peasants, break with the prevailing conventions and initiate a new type of cooperation based on mutual helping and equality in the right and the duty to protect the country from the violent oppressors representing Habsburg (cf. ‘Convey that S and H are cooperators’, ‘Claim reflexivity’ and ‘Claim reciprocity’). The linguistic analysis reveals the crucial role of the Swiss nobility in the development of the social utopia, as well as the non-contribution of Wilhelm Tell. In fact, Tell never communicates with the Swiss noblemen. The role of the nobility and the role of Wilhelm Tell are further investigated in a comparison between Schiller’s Wilhelm Tell and four of Schiller’s historical sources. These sources, which contain earlier, non-dramatic versions of the establishment of the Swiss Confederation, are the following: Kronica von der loblichen Eydtgnoschaft compiled by Petermann Etterlin (1507), Gemeiner loblicher Eydgnoschafft Stetten Landen vnd Völckeren Chronik wirdiger thaaten beschreybung (1548) written by Johann Stumpf, Chronicon Helveticum of Aegidius Tschudi (the publication of Iselin from 1734 and 1736) and Johannes von Müller’s Geschichten schweizerischer Eidgenossenschaft (1786). Thecomparison sheds light on the fact that both Tschudi and von Müller emphasize unity among the Swiss and cooperation in their attempt to defeat the enemy. However, Schiller has reinforced the role of the nobility in the cooperation. In addition, the comparison between Schiller’s play and the historical sources reveals profound differences with regard to the role of Wilhelm Tell. In all of Schiller’s sources, Tell is present at Rütli, whereas he is absent from Rütli in Schiller’s play. In the play in general, Tell is conspicuously separated from the other peasants. Explanations of my linguistic results, which correspond to the above mentioned differences between the roles of the figures in Wilhelm Tell and the depictions in Schiller’s sources, are found by comparing the path of Schiller’s Swiss towards an egalitarian perspective with the kind of social evolution depicted by the German philosopher Johann Benjamin Erhard in his essay Über das Recht des Volks zu einer Revolution (1795). Aiming at considering Schiller’s social utopia within the larger cultural framework of the German response to the French Revolution, the comparison suggests that both authors depict the need for social change in terms of a change in social hierarchies (Erhard 1970: 95-96, cf. Foi 2005: 225). Erhard’s essay thus helps explain the political intention of Schiller’s play to keep the ideals of the French Revolution as crucial aims but profoundly change the means towards freedom and equality. In his attempt to claim the political resistance of the nobles and peasants as just, however, Schiller sacrificed the figure of Wilhelm Tell. Guilty of the murder of Geßler, Tell was no longer suitable for the righteous revolution imagined by Schiller (cf. Bloch 2008: 215 and Schulz 2005: 228). This explains Tell’s absence in the Rütli scene, his isolation in the plot, as well as his non-contribution to the social utopia. Together, the linguistic analysis and contextualisation of Schiller’s play support my hypothesis that Wilhelm Tell describes a process of change in the relationship between peasants and nobles. The interdisciplinary approach to the topic proved to be fruitful for all areas of the research involved.

Beyond the Cosmological Principle

Simplifying the Einstein field equation by assuming the cosmological principle yields a set of differential equations which governs the dynamics of the universe as described in the cosmological standard model. The cosmological principle assumes the space appears the same everywhere and in every direction and moreover, the principle has earned its position as a fundamental assumption in cosmology by being compatible with the observations of the 20th century. It was not until the current century when observations in cosmological scales showed significant deviation from isotropy and homogeneity implying the violation of the principle. Among these observations are the inconsistency between local and non-local Hubble parameter evaluations, baryon acoustic features of the Lyman-α forest and the anomalies of the cosmic microwave background radiation. As a consequence, cosmological models beyond the cosmological principle have been studied vastly; after all, the principle is a hypothesis and as such should frequently be tested as any other assumption in physics. In this thesis, the effects of inhomogeneity and anisotropy, arising as a consequence of discarding the cosmological principle, is investigated. The geometry and matter content of the universe becomes more cumbersome and the resulting effects on the Einstein field equation is introduced. The cosmological standard model and its issues, both fundamental and observational are presented. Particular interest is given to the local Hubble parameter, supernova explosion, baryon acoustic oscillation, and cosmic microwave background observations and the cosmological constant problems. Explored and proposed resolutions emerging by violating the cosmological principle are reviewed. This thesis is concluded by a summary and outlook of the included research papers.