Model for managing non-core ideas to new companies, products and services in a Finnish forest company

Suomalainen metsäteollisuus on muutoksen partaalla. Uutisissa on nähty miten metsäyrityksen sulkevat tehtaita ja paperikoneita. Suomalaisessa metsäteollisuudessa keskitytään tällä hetkellä lähinnä kulujen alentamiseen ja tuottavuuden parantamiseen. Edellytyssille, että suomalainen metsäteollisuus pysyy kilpailukykyisenä, ovat kuitenkinuudet innovaatiot ja toimialojen välinen yhteistyö. Työn tavoitteena oli luoda toimintamalli UPM-Kymmene Oyj:lle, minkä avulla ydinliiketoimintaan kuulumattomat tuote- ja palveluideat saataisiin hyödynnettyä. Aihe on erittäin ajankohtainen, mikäli halutaan pitää tuotanto jatkossakin Suomessa. Luotumalli painottaa pk-sektorin roolia ja potentiaalia kehittää UPM-Kymmeneltä peräisin olevia ja heidän ydinliiketointaan kuulumattomista tuote ja palveluideoistauusia yrityksiä, tuotteita ja palveluita. Malli edustaa uudenlaista ajattelutapaa ja sen käyttöönotto vaatii perinteisen yrityskulttuurin uudistamista UPM-Kymmenessä.

Managing Technologies in Research Organization: Framework for Research Surplus Portfolio

Avoimesta innovaatiosta ja innovaatioiden tehokkaasta hyödyntämisestä on tulossa tärkeitä osia yritysten T&K-prosesseihin. Diplomityön tarkoituksena on luoda viitekehys teknologioiden, jotka eivät kuulu yrityksen ydinliiketoimintaan, tehokkaampaan hallinnointiin tutkimusorganisaatiossa. Konstruktiivinen viitekehys on rakennettu pohjautuen aineettomien pääomien johtamisen ja portfolion hallinnoinnin teorioihin. Lisäksi työssä määritellään työkaluja jatekniikoita ylijäämäteknologioiden arviointiin. Uutta ylijäämäteknologioiden portfoliota voidaan hyödyntää hakukoneena, ideapankkina, kommunikaatiotyökaluna tai teknologioiden markkinapaikkana. Sen johtaminen koostuu tietojen dokumentoinnista järjestelmään, teknologioiden arvioinnista ja portfolion päivityksestä ja ylläpidosta.

Challenges in co-operation with Logistics Service Providers

Kiristyvä kilpailu ja korkean teknologian alalle tyypillisten nopeiden suhdannevaihteluiden tuomat haasteet ajavat yrityksiä etsimään uusia kehityskohteita ja kustannussäästöjä. Ydinosaamisen ulkopuolelle kuuluvan osa-alueen ulkoistamisella yritykset hakevat tehokkuutta ja kustannussäästöjä eri toimintoihinsa. Tässä työssä selvitetään tutkittavan yrityksen toteutuneita ulkoistamisprojekteja, niiden tuomia etuja ja haittoja. Tutkimuksen teoriaosuudessa käsitellään yleisesti ulkoistamiseen liittyviä asioita, sekä uppoudutaan erityisesti logistiikan ulkoistamisen tuomiin mahdollisuuksiin ja haasteisiin. Empiirinen osuus käsittää prosessikuvaukset tutkittavan yrityksen logistisista toiminnoista sekä yrityksen toteutuneista ulkoistamisprojekteista. Vertailut -kappaleessa pohditaan mitä logistiikan ulkoistaminen on tarkoittanut sekä kustannus että operatiivisessa mielessä.

Drivers and Barriers of Collaboration in the Value Chain of Paperboard-Packed Consumer Goods

Value chain collaboration has been a prevailing topic for research, and there is a constantly growing interest in developing collaborative models for improved efficiency in logistics. One area of collaboration is demand information management, which enables improved visibility and decrease of inventories in the value chain. Outsourcing of non-core competencies has changed the nature of collaboration from intra-enterprise to cross-enterprise activity, and this together with increasing competition in the globalizing markets have created a need for methods and tools for collaborative work. The retailer part in the value chain of consumer packaged goods (CPG) has been studied relatively widely, proven models have been defined, and there exist several best practice collaboration cases. The information and communications technology has developed rapidly, offering efficient solutions and applications to exchange information between value chain partners. However, the majority of CPG industry still works with traditional business models and practices. This concerns especially companies operating in the upstream of the CPG value chain. Demand information for consumer packaged goods originates at retailers' counters, based on consumers' buying decisions. As this information does not get transferred along the value chain towards the upstream parties, each player needs to optimize their part, causing safety margins for inventories and speculation in purchasing decisions. The safety margins increase with each player, resulting in a phenomenon known as the bullwhip effect. The further the company is from the original demand information source, the more distorted the information is. This thesis concentrates on the upstream parts of the value chain of consumer packaged goods, and more precisely the packaging value chain. Packaging is becoming a part of the product with informative and interactive features, and therefore is not just a cost item needed to protect the product. The upstream part of the CPG value chain is distinctive, as the product changes after each involved party, and therefore the original demand information from the retailers cannot be utilized as such – even if it were transferred seamlessly. The objective of this thesis is to examine the main drivers for collaboration, and barriers causing the moderate adaptation level of collaborative models. Another objective is to define a collaborative demand information management model and test it in a pilot business situation in order to see if the barriers can be eliminated. The empirical part of this thesis contains three parts, all related to the research objective, but involving different target groups, viewpoints and research approaches. The study shows evidence that the main barriers for collaboration are very similar to the barriers in the lower part of the same value chain; lack of trust, lack of business case and lack of senior management commitment. Eliminating one of them – the lack of business case – is not enough to eliminate the two other barriers, as the operational model in this thesis shows. The uncertainty of the future, fear of losing an independent position in purchasing decision making and lack of commitment remain strong enough barriers to prevent the implementation of the proposed collaborative business model. The study proposes a new way of defining the value chain processes: it divides the contracting and planning process into two processes, one managing the commercial parts and the other managing the quantity and specification related issues. This model can reduce the resistance to collaboration, as the commercial part of the contracting process would remain the same as in the traditional model. The quantity/specification-related issues would be managed by the parties with the best capabilities and resources, as well as access to the original demand information. The parties in between would be involved in the planning process as well, as their impact for the next party upstream is significant. The study also highlights the future challenges for companies operating in the CPG value chain. The markets are becoming global, with toughening competition. Also, the technology development will most likely continue with a speed exceeding the adaptation capabilities of the industry. Value chains are also becoming increasingly dynamic, which means shorter and more agile business relationships, and at the same time the predictability of consumer demand is getting more difficult due to shorter product life cycles and trends. These changes will certainly have an effect on companies' operational models, but it is very difficult to estimate when and how the proven methods will gain wide enough adaptation to become standards.

Kumppanuusohjelman strateginen johtaminen - Monitapaustutkimus puolustushallinnossa

Puolustushallinnossa syntyi 2000-luvun alussa strateginen aie keskittyä ydintoimintoihin, ulkoistaa pääosa tukitoiminnoista ja saavuttaa kustannussäästöjä, jotka voitaisiin kohdentaa ydintoimintoihin. Puolustusministeriö perusti ulkoistamisen hallinnoimiseksi kumppanuusohjelman, mihin kuului lähes alusta alkaen kuusi hanketta, jotka ovat nyt toteuttamisvaiheessa. Näistä valittiin neljä tähän tutkimukseen: maavoimien materiaalin kunnossapito, puolustusvoimien ruokahuolto, puolustusvoimien vaatetushuolto ja puolustushallinnon talous- ja henkilöstöhallinto. Kumppanuusohjelman strategisen johtamisen tutkimus perustuupuolustusministeriön ja puolustusvoimien asiakirja-aineistoihin sekä puolustushallinnon ylimmän johdon ja hankejohtajien haastatteluihin. Kumppanuusohjelmaa ja -hankkeita on seurattu vuodesta 2000 vuoden 2010 kevääseen asti. Tarkastelu kohdistuu strategiaprosessiin ja strategian sisältöön ”puolustushallinnon konsernissa”, johon kuuluvat tässä tutkimuksessa puolustusministeriö, pääesikunta ja puolustushaarat. Tutkimuksen tulokset tukevat viitekehyksessä esitettyjä näkökohtia. Laajan kumppanuusohjelman hallinta edellyttää hyvää strategisen johtamisen otetta. Selkeät päämäärät ja tavoitteet luovat perustan strategiaprosessille. Kumppanuusohjelman strategia muotoutui tarkastelujakson aikana niin strategiaprosessien kuin strategian sisällön suhteen. Toimiva ohjausjärjestelmä on puolustushallinnon avaintoimintoja strategisessa johtamisessa. Resurssiperusteinen strategia osoittautui tärkeäksi ulkoistamisissa ja sosiaalinen pääoma, erityisesti yhteisymmärrys osoittautui tärkeäksi tekijäksi konsernijohtamisessa. Kumppanuusohjelman strategisen johtamisen toimivuuden kehittämiseksi kartoitettiin tekijöitä, jotka muodostuivat tehokkaan strategisen johtamisen esteiksi. Esteitä kartoitettiin kumppanuusohjelmasta ja -hankkeista. Tutkimuksen tärkein kontribuutio kohdistuu strategisen johtamisen kehittämiseen. Se on mahdollista hankkimalla konsernin johtotasoilla yhteisymmärryskehittämisohjelmasta ennen ohjelman käynnistämistä, ottamalla huomioon strategisen johtamisen perusteet, ottamalla käyttöön jatkuva strategiaprosessi ja turvaamalla riittävä osaaminen kumppanuusohjelmassa ja -hankkeissa.

Service Blueprinting in Irregularity Service Improvement, case Swissport Finland Ltd

The trend of concentrating to core competencies leads to outsourcing of non-core activities. One such activity is logistics, where the responsibility is given to third-party service providers. This means the service provider acts as an intermediary between the buyer and the end customer. This thesis concentrates on depicting the operational environment of one such service provider, Swissport Finland Ltd, and the improvement of their checked baggage irregularity service. The tools used for this work were service blueprinting, an illustrative method for service mapping, and failure modes and effects analysis. The theoretical part of the thesis offers a framework for using these tools for logistics services, while the empirical part consists of a study mostly qualitative in nature. Action research method was used for the service improvement research. According to the results of this study the combination of service blueprinting and FMEA can be used successfully for irregularity service improvement. The most important result was an enhanced irregularity process that has been found to alleviate earlier problems.

Työntekijäinnovaatioiden johtaminen osuuskaupassa

Innovatiivisuutta tarvitaan kaikilla elämän aloilla. Työntekijäinnovaatioiden on todettu olevan yksi tekijä saavuttaa kilpailuetua. Työntekijöillä on läheinen kontakti materiaaleihin, markkinoihin, asiakkaisiin ja käyttäjiin, joten heillä on ajankohtaista, kokemusperäistä tietoa ja taitoa yrityksen kehittämiseen. Tämän tutkielman tarkoituksena on osallistua innovatiivisesta organisaatiokulttuurista käytyyn tieteelliseen keskusteluun tuomalla innovaatiot osuustoiminnan yhteyteen. Tutkimus on toteutettu laadullisena tapaustutkimuksena. Aineistonkeruumenetelmänä on käytetty teemahaastattelua. Tutkimuksen empiirinen aineisto on kerätty kuudessa parihaastattelussa kohdeorganisaatiossa marraskuussa 2015. Tutkimuksen tulosten perusteella voidaan sanoa, että osuustoiminnan ydinideat periaatteineen ja arvoineen tukevat innovatiivisen organisaatiokulttuurin luomista asiakasomisteisessa osuuskunnassa. Innovatiivisen organisaatiokulttuurin tekijät puolestaan tukevat yrityksessä työntekijäinnovaatioita. Kun osuuskunnan sidosryhmien, kuten henkilöstön, tietoisuus osuustoiminnan ydinideoista tarkentuu, kehittämisen tarkoituksenmukaisuus ja mielekkyys lisääntyvät.

Sobriae cogitationes circa ideas nonnullas Thomae Hobbesii philosophi Malmesburgensis, de numine ejusque cultu, nec non de libertate, necessitate, casuve fortuito

Dedikaatio: Johannes Nylander, Hindrich Schröder [ruots. pr.], Petrus Hipping.

Technology selection and group decision support systems: Case studies on supporting strategic technology selection processes

The objective of the dissertation is to increase understanding and knowledge in the field where group decision support system (GDSS) and technology selection research overlap in the strategic sense. The purpose is to develop pragmatic, unique and competent management practices and processes for strategic technology assessment and selection from the whole company's point of view. The combination of the GDSS and technology selection is approached from the points of view of the core competence concept, the lead user -method, and different technology types. In this research the aim is to find out how the GDSS contributes to the technology selection process, what aspects should be considered when selecting technologies to be developed or acquired, and what advantages and restrictions the GDSS has in the selection processes. These research objectives are discussed on the basis of experiences and findings in real life selection meetings. The research has been mainly carried outwith constructive, case study research methods. The study contributes novel ideas to the present knowledge and prior literature on the GDSS and technology selection arena. Academic and pragmatic research has been conducted in four areas: 1) the potential benefits of the group support system with the lead user -method,where the need assessment process is positioned as information gathering for the selection of wireless technology development projects; 2) integrated technology selection and core competencies management processes both in theory and in practice; 3) potential benefits of the group decision support system in the technology selection processes of different technology types; and 4) linkages between technology selection and R&D project selection in innovative product development networks. New type of knowledge and understanding has been created on the practical utilization of the GDSS in technology selection decisions. The study demonstrates that technology selection requires close cooperation between differentdepartments, functions, and strategic business units in order to gather the best knowledge for the decision making. The GDSS is proved to be an effective way to promote communication and co-operation between the selectors. The constructs developed in this study have been tested in many industry fields, for example in information and communication, forest, telecommunication, metal, software, and miscellaneous industries, as well as in non-profit organizations. The pragmatic results in these organizations are some of the most relevant proofs that confirm the scientific contribution of the study, according to the principles of the constructive research approach.

Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.

Non-Markovianity and Quantum Correlations in Qubit-Systems

In this Thesis I discuss the exact dynamics of simple non-Markovian systems. I focus on fundamental questions at the core of non-Markovian theory and investigate the dynamics of quantum correlations under non-Markovian decoherence. In the first context I present the connection between two different non-Markovian approaches, and compare two distinct definitions of non-Markovianity. The general aim is to characterize in exemplary cases which part of the environment is responsible for the feedback of information typical of non- Markovian dynamics. I also show how such a feedback of information is not always described by certain types of master equations commonly used to tackle non-Markovian dynamics. In the second context I characterize the dynamics of two qubits in a common non-Markovian reservoir, and introduce a new dynamical effect in a wellknown model, i.e., two qubits under depolarizing channels. In the first model the exact solution of the dynamics is found, and the entanglement behavior is extensively studied. The non-Markovianity of the reservoir and reservoirmediated-interaction between the qubits cause non-trivial dynamical features. The dynamical interplay between different types of correlations is also investigated. In the second model the study of quantum and classical correlations demonstrates the existence of a new effect: the sudden transition between classical and quantum decoherence. This phenomenon involves the complete preservation of the initial quantum correlations for long intervals of time of the order of the relaxation time of the system.

Enhancing absorptive capacity in a non-research and development. An action research approach to converting individual observations into organisational awareness

The ability to recognize potential knowledge and convert it into business opportunities is one of the key factors of renewal in uncertain environments. This thesis examines absorptive capacity in the context of non-research and development innovation, with a primary focus on the social interaction that facilitates the absorption of knowledge. It proposes that everyone is and should be entitled to take part in the social interaction that shapes individual observations into innovations. Both innovation and absorptive capacity have been traditionally related to research and development departments and institutions. These innovations need to be adopted and adapted by others. This so-called waterfall model of innovations is only one aspect of new knowledge generation and innovation. In addition to this Science–Technology–Innovation perspective, more attention has been recently paid to the Doing–Using–Interacting mode of generating new knowledge and innovations. The amount of literature on absorptive capacity is vast, yet the concept is reified. The greater part of the literature links absorptive capacity to research and development departments. Some publications have focused on the nature of absorptive capacity in practice and the role of social interaction in enhancing it. Recent literature on absorptive capacity calls for studies that shed light on the relationship between individual absorptive capacity and organisational absorptive capacity. There has also been a call to examine absorptive capacity in non-research and development environments. Drawing on the literature on employee-driven innovation and social capital, this thesis looks at how individual observations and ideas are converted into something that an organisation can use. The critical phases of absorptive capacity, during which the ideas of individuals are incorporated into a group context, are assimilation and transformation. These two phases are seen as complementary: whereas assimilation is the application of easy-to-accept knowledge, transformation challenges the current way of thinking. The two require distinct kinds of social interaction and practices. The results of this study can been crystallised thus: “Enhancing absorptive capacity in practicebased non-research and development context is to organise the optimal circumstances for social interaction. Every individual is a potential source of signals leading to innovations. The individual, thus, recognises opportunities and acquires signals. Through the social interaction processes of assimilation and transformation, these signals are processed into the organisation’s reality and language. The conditions of creative social capital facilitate the interplay between assimilation and transformation. An organisation that strives for employee-driven innovation gains the benefits of a broader surface for opportunity recognition and faster absorption.” If organisations and managers become more aware of the benefits of enhancing absorptive capacity in practice, they have reason to assign resources to those practices that facilitate the creation of absorptive capacity. By recognising the underlying social mechanisms and structural features that lead either to assimilation or transformation, it is easier to balance between renewal and effective operations.

Non-Markovian dynamics and quantum information probes

This Thesis discusses the phenomenology of the dynamics of open quantum systems marked by non-Markovian memory effects. Non-Markovian open quantum systems are the focal point of a flurry of recent research aiming to answer, e.g., the following questions: What is the characteristic trait of non-Markovian dynamical processes that discriminates it from forgetful Markovian dynamics? What is the microscopic origin of memory in quantum dynamics, and how can it be controlled? Does the existence of memory effects open new avenues and enable accomplishments that cannot be achieved with Markovian processes? These questions are addressed in the publications forming the core of this Thesis with case studies of both prototypical and more exotic models of open quantum systems. In the first part of the Thesis several ways of characterizing and quantifying non-Markovian phenomena are introduced. Their differences are then explored using a driven, dissipative qubit model. The second part of the Thesis focuses on the dynamics of a purely dephasing qubit model, which is used to unveil the origin of non-Markovianity for a wide class of dynamical models. The emergence of memory is shown to be strongly intertwined with the structure of the spectral density function, as further demonstrated in a physical realization of the dephasing model using ultracold quantum gases. Finally, as an application of memory effects, it is shown that non- Markovian dynamical processes facilitate a novel phenomenon of timeinvariant discord, where the total quantum correlations of a system are frozen to their initial value. Non-Markovianity can also be exploited in the detection of phase transitions using quantum information probes, as shown using the physically interesting models of the Ising chain in a transverse field and a Coulomb chain undergoing a structural phase transition.

Novel virtual environment and real-time simulation based methods for improving life-cycle efficiency of non-road mobile machinery

Virtual environments and real-time simulators (VERS) are becoming more and more important tools in research and development (R&D) process of non-road mobile machinery (NRMM). The virtual prototyping techniques enable faster and more cost-efficient development of machines compared to use of real life prototypes. High energy efficiency has become an important topic in the world of NRMM because of environmental and economic demands. The objective of this thesis is to develop VERS based methods for research and development of NRMM. A process using VERS for assessing effects of human operators on the life-cycle efficiency of NRMM was developed. Human in the loop simulations are ran using an underground mining loader to study the developed process. The simulations were ran in the virtual environment of the Laboratory of Intelligent Machines of Lappeenranta University of Technology. A physically adequate real-time simulation model of NRMM was shown to be reliable and cost effective in testing of hardware components by the means of hardware-in-the-loop (HIL) simulations. A control interface connecting integrated electro-hydraulic energy converter (IEHEC) with virtual simulation model of log crane was developed. IEHEC consists of a hydraulic pump-motor and an integrated electrical permanent magnet synchronous motorgenerator. The results show that state of the art real-time NRMM simulators are capable to solve factors related to energy consumption and productivity of the NRMM. A significant variation between the test drivers is found. The results show that VERS can be used for assessing human effects on the life-cycle efficiency of NRMM. HIL simulation responses compared to that achieved with conventional simulation method demonstrate the advances and drawbacks of various possible interfaces between the simulator and hardware part of the system under study. Novel ideas for arranging the interface are successfully tested and compared with the more traditional one. The proposed process for assessing the effects of operators on the life-cycle efficiency will be applied for wider group of operators in the future. Driving styles of the operators can be analysed statistically from sufficient large result data. The statistical analysis can find the most life-cycle efficient driving style for the specific environment and machinery. The proposed control interface for HIL simulation need to be further studied. The robustness and the adaptation of the interface in different situations must be verified. The future work will also include studying the suitability of the IEHEC for different working machines using the proposed HIL simulation method.

Energy aware software for many-core systems

Many-core systems provide a great potential in application performance with the massively parallel structure. Such systems are currently being integrated into most parts of daily life from high-end server farms to desktop systems, laptops and mobile devices. Yet, these systems are facing increasing challenges such as high temperature causing physical damage, high electrical bills both for servers and individual users, unpleasant noise levels due to active cooling and unrealistic battery drainage in mobile devices; factors caused directly by poor energy efficiency. Power management has traditionally been an area of research providing hardware solutions or runtime power management in the operating system in form of frequency governors. Energy awareness in application software is currently non-existent. This means that applications are not involved in the power management decisions, nor does any interface between the applications and the runtime system to provide such facilities exist. Power management in the operating system is therefore performed purely based on indirect implications of software execution, usually referred to as the workload. It often results in over-allocation of resources, hence power waste. This thesis discusses power management strategies in many-core systems in the form of increasing application software awareness of energy efficiency. The presented approach allows meta-data descriptions in the applications and is manifested in two design recommendations: 1) Energy-aware mapping 2) Energy-aware execution which allow the applications to directly influence the power management decisions. The recommendations eliminate over-allocation of resources and increase the energy efficiency of the computing system. Both recommendations are fully supported in a provided interface in combination with a novel power management runtime system called Bricktop. The work presented in this thesis allows both new- and legacy software to execute with the most energy efficient mapping on a many-core CPU and with the most energy efficient performance level. A set of case study examples demonstrate realworld energy savings in a wide range of applications without performance degradation.