Innovation Process Management and System Modelling

Työn tavoitteena oli perehtyä innovaatiojohtamisen ja järjestelmän soveltamiseen prosessiteollisuuden toimintaympäristöön. Kirjallisuuslähteitä apuna käyttäen perehdyttiin liiketoimintaympäristön innovaatiojohtamiselle asettamiin vaatimuksiin ja erilaisiin innovaatiojärjestelmiin. Olennaisena osana innovaatiojohtamiseen liittyy sidosryhmien tarpeiden ja niiden tarjoamien resurssien huomioiminen toiminnassa. Myöskin tuotekehityksen menetelmät ja työkalut ovat omalta osaltaan merkittävässä asemassa toiminnan tehokkuutta arvioitaessa. Innovaatiojärjestelmä tulee sopeuttaa yrityksen toimintoihin ja sen erityispiirteet huomioonottaen siten, että toiminnan johtaminen prosessina tuo yritykselle ja sen sidosryhmille lisäarvoa. Innovaatiojärjestelmän luominen yritykselle on ainayksilöllinen prosessi ja siihen ei ole olemassa yleispätevää menetelmää, joka voitaisiin ottaa käyttöön sellaisenaan. Yritys, jonka liiketoiminta keskittyy kuitupohjaisten pakkausmateriaalien valmistamiseen, joutuu täyttämään toiminnassaan materiaalintoimittajien, omien tuotantoprosessiensa ja asiakkaiden sekä jopa loppukäyttäjien uusille tuotteille luomat odotukset. Innovaatiojohtamista sävyttää toiminnan tulosten suuri epävarmuus ja sen vaativien aineellisten ja henkisten resurssien mittavuus. Innovaatiotoiminnan johtaminen prosessina, käyttäen hyväksi järjestelmämallia, tavoittelee systemaattista ja asetettujen kriteerien täyttämää lähestymistapaa tuotekehityksen ja uusien liiketoimintainnovaatioiden alueella. Kehitetyn mallin tulee palvella monimutkaista liiketoimintaympäristöä, jokatoisaalta perustuu tehokkaaseen massatuotantoon ja toisaalta pyrkii erilaistumaan palvelemalla sekä huomioimalla asiakkaidensa tuotteille asettamat vaatimukset.

Innovation process management of complex consumer products and services in new innovation paradigm – case location based business

Innovation is the word of this decade. According to innovation definitions, without positive sales impact and meaningful market share the company’s product or service has not been an innovation. Research problem of this master thesis is to find out what is the innovation process of complex new consumer products and services in new innovation paradigm. The objective is to get answers to two research questions: 1) What are the critical success factors what company should do when it is implementing the paradigm change in mass markets consumer business with complex products and services? 2) What is the process or framework one firm could follow? The research problem is looked from one company’s innovation creation process, networking and organization change management challenges point of views. Special focus is to look the research problem from an existing company perspective which is entering new business area. Innovation process management framework of complex new consumer products and services in new innovation paradigm has been created with support of several existing innovation theories. The new process framework includes the critical innovation process elements companies should take into consideration in their daily activities when they are in their new business innovation implementing process. Case company location based business implementation activities are studied via the new innovation process framework. This case study showed how important it is to manage the process, look how the target market and the competition in it is developing during company’s own innovation process, make decisions at right time and from beginning plan and implement the organization change management as one activity in the innovation process. In the end this master thesis showed that all companies need to create their own innovation process master plan with milestones and activities. One plan does not fit all, but all companies can start their planning from the new innovation process what was introduced in this master thesis.

Supporting knowledge creation and sharing in the early phases of the strategic innovation process

The driving forces of technology and globalization continuously transform the business landscape in a way which undermines the existing strategies and innovations of organizations. The challenge for organizations is to establish such conditions where they are able to create new knowledge for innovative business ideas in interaction between other organizations and individuals. Innovation processes continuously need new external stimulations and seek new ideas, new information and knowledge locating more and more outside traditional organizational boundaries. In several studies, the early phases of the innovation process have been considered as the most critical ones. During these phases, the innovation process can emerge or conclude. External knowledge acquirement and utilization are noticed to be important at this stage of the innovation process giving information about the development of future markets and needs for new innovative businessideas. To make it possible, new methods and approaches to manage proactive knowledge creation and sharing activities are needed. In this study, knowledge creation and sharing in the early phases of the innovation process has been studied, and the understanding of knowledge management in the innovation process in an open and collaborative context advanced. Furthermore, the innovation management methods in this study are combined in a novel way to establish an open innovation process and tested in real-life cases. For these purposes two complementary and sequentially applied group work methods - the heuristic scenario method and the idea generation process - are examined by focusing the research on the support of the open knowledge creation and sharing process. The research objective of this thesis concerns two doctrines: the innovation management including the knowledge management, and the futures research concerning the scenario paradigm. This thesis also applies the group decision support system (GDSS) in the idea generation process to utilize the converged knowledge during the scenario process.

Integrating Group Support Systems to innovation process of a forest company

The objective of this study was to analyze the effects of Group Support Systems (GSS) to overall efficiency of innovation process. Overall efficiency was found to be a sum of meeting efficiency, product effectiveness, and learning efficiency. These components were studied in various working situations common in early stages of innovation process. In the empirical part of this study, the suitability of GSS at the forest company was assessed. The basics for this study were idea generation meetings held at LUT and results from the surveys done after the sessions. This data combined with the interviews and theoretical background was used to analyze suitability of this technology to organizational culture at the company. The results of this study are divided to theory and case level. On theory level GSS was found to be a potentially valuable tool for innovation managers, especially at the first stages of the process. On case level, GSS was found to be a suitable tool at Stora Enso for further utilization. A five step implementation proposal was built to illustrate what would be the next stages of GSS implementation, if technology was chosen for further implementation.

The Innovation Process – Aiming towards Innovativeness in a Construction Company

The bachelor’s thesis concentrates on the innovativeness in the construction industry. The purpose of the thesis is to define the innovation as a concept reflected on a context of the construction industry. The second objective is to examine how the construction companies could foster and increase the innovativeness. The third objective was to find out tools, methods and phases of the front-end of the innovation process. The construction industry is often considered as a traditional and an old-fashioned manufacturing industry. The innovation or the innovativeness rarely linked to the construction industry. Productivity is a common problem in the construction industry. The construction industry needs to increase the productivity to compete in a globalized world. The productivity can be increased by the innovation. The thesis based on a literature review. The findings from the literature include a description of the innovation as a concept, the innovative culture and the innovation process as a context of the construction industry. The phases of the front-end of the innovation process were explained. Customers centered approach was taken into account in the innovation process. The required tools and methods for managing the front-end of the innovation process were illustrated. The thesis ensures the importance of the innovation facing challenges of the construction industry. Managing the front-end of the innovation is the most important aspect to stand out from the less innovative companies. To take a full advantage of the innovation companies cannot fear of changes. The innovation process requires a full support of the top management of the company. Taking into consideration a theoretical aspect of the thesis a further research is required to respond practical needs of the company. Tools and methods should be considered according the company’s needs and activities. Company’s existing state and culture should be examined before implementing the front-end of the innovation process to ensure the functionality.

Challenges of user-driven innovations on late stages of innovation process: evidence from ICT companies

The goal of this thesis is to study user-driven innovations and user involvement throughout the innovation process in context of B2B companies. Significant emphasis in the analysis put onto the late stages of innovation process and commercialization of innovations. Thesis includes detailed review of theoretical concepts and underlying frameworks of innovation process, lead users and user-driven innovations. The empirical part of the thesis consist of interviews of the four companies from ICT industry, followed by the comprehensive analysis and comparison of the results. The presented findings indicate common challenges, which ICT companies face, when shifting towards innovation by users paradigm. Linkages and connections among current situation and theoretical frameworks presented in the discussion part of the thesis allow to draw practical managerial implications. The results of the research emphasize valuable insights and challenges of user interactions within innovation process as well as output and participation related benefits for the companies and users. The research points out current state of the user involvement techniques and tools used for user interactions as well as suggests the possibilities for improvement in the future.

Describing and Analyzing Information Technology through Total Quality Management and Process Management: Case Stora Enso Newsprint

Laatu on osaltaan vahvistamassa asemaansa liike-elämässä yritysten kilpaillessa kansainvälisillä markkinoilla niin hinnalla kuin laadulla. Tämä suuntaus on synnyttänyt useita laatuohjelmia, joita käytetään ahkerasti yritysten kokonais- valtaisen laatujohtamisen (TQM) toteuttamisessa. Laatujohtaminen kattaa yrityksen kaikki toiminnot ja luo vaatimuksia myös yrityksen tukitoimintojen kehittämiselle ja parantamiselle. Näihin lukeutuu myös tämän tutkimuksen kohde tietohallinto (IT). Tutkielman tavoitteena oli kuvata IT prosessin nykytila. Tutkielmassa laadittu prosessikuvaus pohjautuu prosessijohtamisen teoriaan ja kohdeyrityksen käyttämään laatupalkinto kriteeristöön. Tutkimusmenetelmänä prosessin nykytilan selvittämiseksi käytettiin teemahaastattelutta. Prosessin nykytilan ja sille asetettujen vaatimusten selvittämiseksi haastateltiin IT prosessin asiakkaita. Prosessianalyysi, tärkeimpien ala-prosessien tunnistaminen ja parannusalueiden löytäminen ovat tämän tutkielman keskeisemmät tulokset. Tutkielma painottui IT prosessin heikkouksien ja parannuskohteiden etsimiseen jatkuvan kehittämisen pohjaksi, ei niinkään prosessin radikaaliin uudistamiseen. Tutkielmassa esitellään TQM:n periaatteet, laatutyökaluja sekä prosessijohtamisen terminologia, periaatteet ja sen systemaattinen toteutus. Työ antaa myös kuvan siitä, miten TQM ja prosessijohtaminen niveltyvät yrityksen laatutyössä.

The Early Phases of Innovation Process - Case: New Wireless E-Business Opportunities in Forest Industry

Tutkimuksen tavoitteena oli soveltaa innovaatioprosessiteorioita käytäntöön konteksti huomioonottaen, koska langattoman sähköisen liiketoiminnan nopeat muutokset, metsäteollisuuden erityispiirteet ja ei-kaupallisuus asettavat erityistarpeita innovoinnille. Painopiste on prosessin aikaisissa vaiheissa, koska ne ovat kriittisiä koko innovaatioprosessin menestymisen kannalta. Tähtäimenä oli löytää yrityssektorille uusia langattomia sähköisen liiketoiminnan mahdollisuuksia, jotka hyödyttävät tutkimuksessa mukanaolevaa yritystä. Tutkimuksessa käytettiin konstruktiivista tutkimusotetta ja metodeina sähköistä aivomyrskyä, tarkistuslistaa sekä GDSS- ja postikyselyä.Tutkimuksen tuloksena on esitetty innovaatioprosessin aikaiset vaiheet kirjallisuudesta, metsäteollisuuden erityispiirteet ja innovaatioprosessisovellus. Lisäksi tämä tutkimus tuotti uusia sähköisen liiketoiminnan ideoita, suoritti niille seulonnan ja kävi läpi alustavan tutkimuksen.

Innovation process development and business process integration - a multiple case study

The main objective of this study was to find out the bases for innovation model formulation in an existing organization based on cases. Innovation processes can be analyzed based on their needs and based on their emphasis on the business model development or R&D. The research was conducted in energy sector within one company by utilizing its projects as cases for the study. It is typical for the field of business that development is slow, although the case company has put emphasis on its innovation efforts. Analysis was done by identifying the cases’ needs and comparing them. The results were that because of the variances in the needs of the cases, the applicability of innovation process models varies. It was discovered that by dividing the process into two phases, a uniform model could be composed. This model would fulfill the needs of the cases and potential future projects as well.

Innovation Process and Organizational Adoption of Disruptive Innovation: Empirical Evidence from Finnish Bio-Economy Companies.

The thesis aims to build a coherent view and understanding of the innovation process and organizational technology adoption in Finnish bio-economy companies with a focus on innovations of a disruptive nature. Disruptive innovations are exceptional hence in order to create generalizations and a unified view of the subject the perspective is also on less radical innovations. Other interests of the thesis are how ideas are discovered and generated and how the nature of the innovation and size of the company affect the technology adoption and innovation process. The data was collected by interviewing six small and six large Finnish bio-economy companies. The results suggest companies regardless of size consider innovation as a core asset in the competitive markets. Organizations want to be considered innovators and early adopters yet these qualities are limited by certain, mainly resource-based factors. In addition the industry, scalability and Finland’s geographical location when seeking funding provide certain challenges. The innovation process may be considered relatively similar whether the idea or technology stems from an internal or external source suggesting the technology adoption process can in fact be linked to the innovation process theories. Thus the thesis introduces a new theoretical model which based on the results of the study and the theories of technology adoption and innovation process aims on characterizing how ideas and technology from both external and internal sources generate into innovations. The innovation process is in large bio-economy companies most often similar to or a modified version of the stage-gate model, while small companies generally have less structured processes. Nevertheless the more disruptive the innovation, the less it fits in the structured processes. This implies disruptive innovation cannot be put in a certain mould but it is rather processed case-by-case.

Developing Supply Chain Process Management and Measurement in Global Manufacturing Company

The objective of this research is to create a current state analysis of pulp supply chain processes from production planning to deliveries to customers. A cross-functional flowchart is being used to model these processes. These models help finding key performance indicators (KPIs) which enable examinations of the supply chain efficiency. Supply chain measures in different processes reveal the changes need processes that affect the whole supply chain and its efficiency and competitiveness. Structure of pulp supply chain differs from most of the other supply chains. The fact that there are big volumes of bulk products, small product variations and supply forecasts are made for the year ahead make the difference. This factor brings different benefits but also challenges when developing supply chain. This thesis divides pulp supply chain in three different main categories: production planning, warehousing and transportation. It provides tools for estimating the functionality of supply chain as well as developing the efficiency for different functions of supply chain. By having a better understanding of supply chain processes and measurement the whole supply chain structure can be developed significantly.

Innovation Project Portfolio Management

Companies today are forced to innovate in order to remain within business. Such innovation projects undertaken by the companies are defined in this study as creative ideas which have been managed through “Stage-Gate” innovation process. This process is used to manage innovation projects as they proceed from being newly created to ready for launching/implementing. This has ensured that the companies manage the innovation project right. However, with so many new creative ideas the companies can come up within limited resources, the companies must rely on Innovation Project Portfolio Management (IPPM) to ensure that they are managing only the right innovation projects. Although, there are many tools and techniques available for use within Project Portfolio Management, there is still no consensus on which are the most effective and no standard framework has been established especially for IPPM. Thus, this study proposes a practical framework for which individual innovative organization can follow as a guideline to manage its innovation project portfolio. The study theoretically first addresses the key differences between project portfolio management of innovation projects and other traditional projects - one of which is the stage nature of innovation projects due to their unclear objectives from the beginning compare to clearly established objectives of traditional projects. Secondly, different tools and techniques which can be used are examined based on the three goals of IPPM: (1) Maximizing the Value of Innovation Project Portfolio: Financial Methods, Decision Trees, Scoring Models and Checklists; (2) Balancing Innovation Project Portfolio: Visual Representations; and (3) Aligning Innovation Project Portfolio with Strategy: Bottom-Up (Scoring Models with Strategic Criteria) and Top-Down (Strategic Buckets). Finally, the two approaches in which IPPM can be integrated with Stage-Gate innovation process are discussed: (1) Gates- Dominated; and (2) Portfolio Reviews-Dominated. Practically, this study investigates IPPM of a case organization, and through analysis of the case study results proposes a practical framework for case organization to improve its current management of innovation project portfolio. This framework is then generalized to propose a final practical framework or guideline for which an innovative organization can follow to manage its innovation project portfolio.