Innovation Benchmark Study: Analysis of Innovation Processes in Finnish Companies

Liikevaihdon orgaaninen kasvu on ensisijainen tekijä ja haaste yritysjohdolle yrityksen omistaja-arvon kasvattamiseksi. Tutkimus tarkastelee suosivatko suomalaisyritykset pääasiallisesti olemassa olevaa liiketoimintaa palvelevia innovaatioita vai tukevatko nykyhetken toimintatavat myös uusia kasvua kiihdyttäviä radikaaleja innovaatioita. Lisäksi työ kartoitti suomalaisyritysten innovaatioprosessien kehitysalueita käyttäen itsearviointitutkimusta.Tulokset johtivat kolmeen johtopäätökseen. Tutkimus osoitti, että vastaajayritykset ovat keskittyneet innovaatiotoiminnassaan vahvasti ydinliiketoimintaansa, jättäen potentiaaliset kasvumahdollisuudet huomioimatta. Yritykset tavoittelevat maksimaalisia tuottoja keskittymällä tuotteidensa korkeaan suorituskykyyn. Lyhyen aikavälin epärealistiset tuotto-odotukset sekä projekteille suunnatut arviointikriteerit rajoittavat liiketoimintaa mullistavien radikaalien innovaatioiden kehittymistä organisaatiossa. Toiseksi, tutkimus osoitti, että suuri osa yrityksistä käyttää perinteisen projektien arviointi- ja kehitysprosessin lisäksi vaihtoehtoisia ja huonosti kontrolloitavissa olevia kehitysprosesseja, mikäli projektille annetaan kielteinen rahoituspäätös standardin prosessin sisällä. Kolmanneksi, suomalaisyritysten innovaatioprosesseissa paljastui merkittäviä puutteita mitattavien elementtien suhteen.

Developing Supply Management Processes in a Global Process Automation Organization

Tämän työn tarkoituksena on tutkia prosessien uudelleensuunnittelua ja erityisesti hankintaprosessien uudistamista kansainvälisessä prosessiautomaatioyrityksessä. Työn aihealuetta tutkitaan sekä henkilöstön, uuden teknologian että prosessien kehittämisen näkökulmasta. Prosessien kehittämisessä työkaluna on käytetty tunnettua laatutyökalua, Six Sigmaa. Työn päätavoitteena on luoda uudet toimintamallit kehitettäville prosesseille. Kirjallisuuden lisäksi työ perustuu kirjoittajan kokemuksiin ja havaintoihin projektitiimin jäsenenä. Prosessien kehittämistä tarkastellaan myös muutoksenhallinnan näkökulmasta. Tämä on alue, jota ei saisi koskaan jättää huomiotta kehityshankkeissa. Kehitettäessä liiketoimintaprosesseja muutoksenhallinta on menestyksen kannalta ensisijaisen tärkeää. Muutoksenhallintaa tutkitaan työssä sekä organisaation että yksilön kannalta. Tässä työssä esitellään lisäksi maailmanlaajuisesti tunnettu ja käytetty laatutyökalu, Six Sigma. Six Sigmaa on käytetty myös työn lopussa tarkasteltavassa case-osuudessa. Case-osuudessa prosesseja tutkitaan aina nykytilasta uusiin toimintamalleihin saakka. Prosesseja ja niiden suorituskykyä analysoidaan yhtäjaksoisesti kehitysprojektien edetessä.

Developing Launching Processes — A Case Study

New product launches are becoming more and more important to companies around the globe. Being first on the market is a good place to be, and it will mostly likely bring the best profits. Gaining that desired position requires a lot of work where cooperation inside as well as outside of the company need to be in line. This thesis discusses launching processes in a pharmaceutical firm. The topic is looked at from supply chain management's point of view where purchasing department's role is emphasized. Additionally, launching strategies related to launches are investigated and the idea of internal alignment is introduced. Moreover, the topic is examined in project and process management perspective; how with the tools of project and process management the launching processes could be improved. The main findings reveal that there are many improvement points in the current launching process. Problems in the areas of information exchange, leadership and internal alignment were discovered yet trust and confidence for the better future compound the interviewees. This study presents what are the most important factors for a successful product launch and how the current processes could be streamlined.

Usability of laser–arc hybrid welding processes in industrial applications

Metal industries producing thick sections have shown increasing interest in the laser–arc hybrid welding process because of its clear advantages compared with the individual processes of autogenous laser welding and arc welding. One major benefit of laser–arc hybrid welding is that joints with larger gaps can be welded with acceptable quality compared to autogenous laser welding. The laser-arc hybrid welding process has good potential to extend the field of applications of laser technology, and provide significant improvements in weld quality and process efficiency in manufacturing applications. The objective of this research is to present a parameter set-up for laser–arc hybrid welding processes, introduce a methodical comparison of the chosen parameters, and discuss how this technology may be adopted in industrial applications. The research describes the principles, means and applications of different types of laser–arc hybrid welding processes. Conducted experiment processing variables are presented and compared using an analytical model which can also be used for predictive simulations. The main argument in this thesis is that profound understanding of the advanced technology of laser-arc hybrid welding will help improve the productivity of welding in industrial applications. Based on a review of the current knowledge base, important areas for further research are also identified. This thesis consists of two parts. The first part introduces the research topic and discusses laser–arc hybrid welding by characterizing its mechanism and most important variables. The second part comprises four research papers elaborating on the performance of laser– arc hybrid welding in the joining of metals. The study uses quantitative and qualitative research methods which include in-depth, interpretive analyses of results from a number of research groups. In the interpretive analysis, the emphasis is placed on the relevance and usefulness of the investigative results drawn from other research publications. The results of this study contribute to research on laser–arc hybrid welding by increasing understanding of how old and new perspectives on laser–arc hybrid welding are evidenced in industry. The research methodology applied permits continued exploration of how laser–arc hybrid welding and various process factors influence the overall quality of the weld. Thestudy provides a good foundation for future research, creates improved awareness of the laser–arc hybrid welding process, and assists the metal industry to maximize welding productivity.

Improvement of open innovation processes: case Nokia

Open innovation is becoming increasingly popular in academic literature and in business life, but even if people heard about it, they might not understand what it really is, they may over-estimate it thinking that it is savior or underestimate it, concentrating on limitations and risks. Current work sheds light on most important concepts of open innovation theory. Goal of current research is to offer business processes improvement for both inbound and outbound modes in case company. It is relevant as open innovation proved to affect firms‘ performance in general case and in case company, and Nokia planned to develop open innovation implementation since 2008 but still competitors succeed in it more, therefore analysis of current situation with open innovation in Nokia and recommendations how to improve it are topical. Case study method was used to answer the question ―How open innovation processes can be improved?‖. 11 in-depth interviews with Nokia senior managers and independent consultants were used to reach the goal of the thesis, as well as secondary sources. Results of current work are as-is and to-be models (process models of today and best practices models) of several open innovation modes, and recommendation for case company, which will be presented to company representatives and checked for practical applicability.

Advanced analysis and design methods for preparative chromatographic separation processes

Preparative liquid chromatography is one of the most selective separation techniques in the fine chemical, pharmaceutical, and food industries. Several process concepts have been developed and applied for improving the performance of classical batch chromatography. The most powerful approaches include various single-column recycling schemes, counter-current and cross-current multi-column setups, and hybrid processes where chromatography is coupled with other unit operations such as crystallization, chemical reactor, and/or solvent removal unit. To fully utilize the potential of stand-alone and integrated chromatographic processes, efficient methods for selecting the best process alternative as well as optimal operating conditions are needed. In this thesis, a unified method is developed for analysis and design of the following singlecolumn fixed bed processes and corresponding cross-current schemes: (1) batch chromatography, (2) batch chromatography with an integrated solvent removal unit, (3) mixed-recycle steady state recycling chromatography (SSR), and (4) mixed-recycle steady state recycling chromatography with solvent removal from fresh feed, recycle fraction, or column feed (SSR–SR). The method is based on the equilibrium theory of chromatography with an assumption of negligible mass transfer resistance and axial dispersion. The design criteria are given in general, dimensionless form that is formally analogous to that applied widely in the so called triangle theory of counter-current multi-column chromatography. Analytical design equations are derived for binary systems that follow competitive Langmuir adsorption isotherm model. For this purpose, the existing analytic solution of the ideal model of chromatography for binary Langmuir mixtures is completed by deriving missing explicit equations for the height and location of the pure first component shock in the case of a small feed pulse. It is thus shown that the entire chromatographic cycle at the column outlet can be expressed in closed-form. The developed design method allows predicting the feasible range of operating parameters that lead to desired product purities. It can be applied for the calculation of first estimates of optimal operating conditions, the analysis of process robustness, and the early-stage evaluation of different process alternatives. The design method is utilized to analyse the possibility to enhance the performance of conventional SSR chromatography by integrating it with a solvent removal unit. It is shown that the amount of fresh feed processed during a chromatographic cycle and thus the productivity of SSR process can be improved by removing solvent. The maximum solvent removal capacity depends on the location of the solvent removal unit and the physical solvent removal constraints, such as solubility, viscosity, and/or osmotic pressure limits. Usually, the most flexible option is to remove solvent from the column feed. Applicability of the equilibrium design for real, non-ideal separation problems is evaluated by means of numerical simulations. Due to assumption of infinite column efficiency, the developed design method is most applicable for high performance systems where thermodynamic effects are predominant, while significant deviations are observed under highly non-ideal conditions. The findings based on the equilibrium theory are applied to develop a shortcut approach for the design of chromatographic separation processes under strongly non-ideal conditions with significant dispersive effects. The method is based on a simple procedure applied to a single conventional chromatogram. Applicability of the approach for the design of batch and counter-current simulated moving bed processes is evaluated with case studies. It is shown that the shortcut approach works the better the higher the column efficiency and the lower the purity constraints are.

Organization of the marketing communication activities after fusion - the integration and the decision making processes

This master’s thesis was made in order to gain answers to the question of how the integration of the marketing communications and the decision making related to it in a geographically dispersed service organization could be improved in a situation where an organization has gone through a merger. The effects of the organizational design dimensions towards the integration of the marketing communications and the decision making related to it was the main focus. A case study as a research strategy offered a perfect frames for an exploratory study and the data collection was conducted by semi-structured interviews and observing. The main finding proved that from the chosen design dimensions, decentralization, coordination and power, could be found specific factors that in a geographically dispersed organization are affecting the integration of the marketing communications negatively. The effects can be seen mostly in the decision making processes, roles and in the division of responsibility, which are affecting the other dimensions and by this, the integration. In a post-merger situation, the coordination dimension and especially the information asymmetry and the information flow seem to have a largest affect towards the integration of the marketing communications. An asymmetric information distribution with the lack of business and marketing education resulted in low self-assurance and at the end in fragmented management and to the inability to set targets and make independent decisions. As conclusions it can be stated, that with the organizational design dimensions can the effects of a merger towards the integration process of the marketing communications to be evaluated.

Improving business processes in a globally dispersed make-to-order supply chain. Case study on outbound logistics in a Multinational Corporation

The purpose of this thesis is to find out how outbound logistics process can be improved by reducing unnecessary waste in a globally dispersed make-to-order (MTO) supply chain. The research problem was addressed by a multinational corporation that aims to find a solution for reducing unnecessary waste in their outbound logistics process. The focus is on customized products that are delivered via sea transportation. Theoretical framework for improving outbound logistics processes in globally dispersed MTO supply chain was created based on business process management, Porter’s value chain theory, value stream mapping and current reality tree. The empirical research was conducted by using constructive approach due to its ability to research a practical problem and to improve the existing practices. The data was collected from ten semi-structured interviews and three non-participant observations. By analysing the data and applying the theoretical framework, five types of waste were detected in the process that were seen to derive from six root causes. Practical solution was constructed to reduce the waste in the process by combining the existing literature with the ideas raising from empirical data. The results of this thesis suggest that a MNC with a globally dispersed MTO supply chain can improve its outbound logistics process by applying activities that enhance internal and external integration, collaboration and coordination, and increase predictability of the process. This research has practical relevance both for the case company as well as for other MNCs with globally dispersed MTO supply chains that aim to improve their outbound logistics processes. This research contributes to the BPM and CRA research by providing an evidence for their applicability in the new context.

Materiaalitietokanta prosessilaitetoimituksen laitevalintojen tukena

In this master's thesis, material characteristics which includes material database will be developed, through which will be managed process device deliveries device selections. The analysed bulk materials exact values serve as basic data when choosing glass- and dried product industry raw material equipment solutions. In this study, the material database function structure will be divided into classified bulk materials characteristics and process device guidelines and planning which they are based on. In order to achieve the best possible advantage in use of the material database, the raw material handling with the process equipment has to be controlled with the help of database bulk material information. With the help of material database, the personnel of the company will find the needed material and device information to implement the processes. The structure of the database enables adding of information, and hence the database will be always kept updated. The material database uses free PhpOpenDatabase software programme, which adapts itself flexibly with the software and requirements of the company. The material frame and considered features of the material database were determined by the requirements of the company's device technology. National and international classifications were used as help. The collected material information was analysed and the correspondence between internal study results and found classifications were determined. As presented before, on the grounds of chosen and specified material features, also the controllability of device selecting and solutions was improved with device-specific screening and planning guidelines. As material frame of the material database was chosen ANSI/CEMA Standard 550. Its almost 1000 bulk materials form an extensive database frame. Over 600 of these raw materials have been determined according to classification. However, the most important ones are the materials of glass- and dried material plants, which consist of the last part of material frame. The analysis will be sustained and material information will be completed primarily of material part with test run in one's own material laboratory.

Uuden täydennysyhteistyömallin toteuttaminen: vaikutukset toimittajayritykseen

Pärjätäkseen nykypäivän kiristyvässä kilpailussa yritysten on kuuluttava kilpailukykyiseen toimitusketjuun ja toimittava yhteistyössä muiden yritysten kanssa. Yksi tunnetuimmista yhteistyömenetelmistä on täydennysyhteistyö, jossa toimittaja vastaa toimitusten suunnittelusta ilman perinteistä tilaus-toimitus-prosessia. Täydennysyhteistyöstä käytetään eri nimityksiä toimialasta ja toimitusketjun portaasta riippuen, mutta yleisellä tasolla on kyse samoista periaatteista: toimittajalla on vastuu varaston täydentämisestä ja sillä on käytössään täydennyspäätöksiin tarvittavaa tietoa. Työssä tarkastellaan tapausta, jossa toimittaja on ottanut käyttöön uuden täydennysyhteistyöhön liittyvän toimintatavan ja täydennystoimitusten laskentaan käytettävän työkalun. Tavoitteena on selvittää uuden täydennysyhteistyömallin käyttöönoton vaikutukset toimittajan näkökulmasta. Kirjallisuuskatsauksen avulla kartoitetaan täydennystoimitusten suunnitteluun vaikuttavat tekijät. Työssä kuvataan vanha ja uusi täydennysyhteistyömalli ja niitä vertaillaan keskenään. Uuden tyädennysyhteistyömallin vaikutuksia tutkitaan kolmella tasolla: yhteistyön mahdollistajat, suunnittelu ja prosessit sekä suorituskyky. Tutkimuksen perusteella uuden täydennysyhteistyömallin etuja ovat muun muassa tiedon käsittelyn nopeus ja helppous. Puutteeksi koetaan toimitussuunnitelman muuttamisen hankaluus työkalussa. Vaikka lähes kaikkien tutkimusotoksen tuotteiden keskimääräiset varastotasot olivat alentuneet uuden täydennysyhteistyömallin käyttöönoton jälkeen, varastotavoitteiden saavuttaminen ei ollut parantunut. Tuloksiin vaikuttavat useattekijät, joista tärkeimpiä ovat kysynnän vaihtelu ja volyymi sekä varastotavoite. Lisäksi ennustetarkkuus vaikuttaa toimitusten suunnitteluun ja siten varastonsuorituskykyyn.

Osaaminen tietämyksen tukena kehitettäessä aikuisopiston työprosesseja

Osaaminen voi muodostua ongelmaksi yritysten kilpailukyvylle, jos siihen ei kiinnitetä huomiota jo strategiasuunnittelusta lähtien. Vaikka asiakkaiden muuttuneet odotukset kyettäisiinkin kohdentamaan ennen kilpailijoita, saattaa olla, että siihen ei pystytä vastaamaan, jos ei ehditä oppimaan uutta tai uudella tavalla. Diplomityön tavoitteena on laatia Etelä-Karjalan aikuisopistollehenkilöstön osaamisen kehittämiskuvaus siitä, kuinka strategian määrittämisestälähtien voidaan henkilöstön osaamista parantaa ja pyrkiä luomaan kilpailuetua markkinoilla. Henkilöstön osaamisen kehittäminen tulee olla suunnitelmallista, tarvittaessa yksilön, ryhmän ja organisaation edut huomioivaa, riittävän yksinkertaista ja konkreettista, jotta suunnitelma voidaan toteuttaa, seurata ja edelleenkehittää. Työn teoriaosassa on kuvattu vision ja strategian merkitystä osaamisen kehittämiseen. Lisäksi on tarkasteltu yksilön oppimista, oppimisen prosessia ja sen kehittymistä organisaation kyvykkyydeksi. Osaamisen infrastruktuuria on lähestytty organisaatiokulttuurin, sitouttamisen ja kehittämisjärjestelmän näkökulmasta. Empiirisessä osuudessa on tuotu esiin aikuisopiston henkilöstön osaamisen kehittämisen tavoitteet, nykyiset käytännöt, kehittämisen vaihtoehdot sekä jatkotoimenpiteet. Osaaminen on aikuisopiston henkilöstön ammattitaidon perusta. Osaamistarpeen määrittämisen tulee keskittyä aikuisopiston ydinosaamisen kehittämiseen. Henkilöstö tulisi nähdä motivoinnin ja sitouttamisen kautta inhimillistä tietopääomaa kasvattavana tekijänä, johon voidaan sujuvasti liittää aineeton pääoma (data, informaatio jne.) sekä strateginen reservi, kuten kilpailuetua tuottava innovointitoiminta.