Age and size structure of gap-dynamic, old-growth boreal forest stands in Newfoundland

[Abstract]

Paperitehtaan kunnossapitoprosessien gap -analyysi

Tässä diplomityössä käsitellään paperitehtaan kunnossapitoprosessien hallintaa ja niiden uudistamista yrityksen strategisista lähtökohdista. Diplomityön tavoitteena on etsiä merkittävimmät poikkeamat toimintojen nykytilan ja strategiassa määritellyn tavoitetilan välillä, ja tämän perusteella esittää kehitysehdotuksia toimintojen parantamiseksi. Tutkimuksen kirjallisessa osassa tutkimusongelmaa käsitellään prosessien kuvaamisen, ydinprosessien määrittelemisen ja toimintamallimuutoksen käyttöönoton näkökulmasta. Lisäksi kirjallisissa lähteissä hyödynnetään kunnossapidon johtamisen ajatuksia. Diplomityön empiirisessä osassa toteutetaan haastattelututkimus kohdeyrityksen kunnossapito-organisaatiossa sekä benchmark -tyyppinen haastattelu ulkopuolisessa yrityksessä. Tutkimuksen tulokset osoittavat, että kunnossapitotoimintojen toteuttaminen on hajanaista niin yrityksen strategiaan kuin osastojen väliseen toimintaan suhteutettuna. Näiden tulosten perusteella suositellaan johdolle aktiivisempaa otetta toimintamallimuutoksen loppuunsaattamiseen.

Mapping out customer segments and marketing channels in the Finnish Homelift market

Työn tavoitteena oli saada selville ketkä ovat uuden tuotteen, eli kotihissin asiakkaat. Mitkä ovat tuotteen mahdollisuudet Suomen markkinoilla ja onko markkinoilla odotettavissa kasvua, sekä miten tähän mahdolliseen kasvuun päästäisiin käsiksi. Kotihissin ominaisuudet vaikuttavat siihen, että se on tarkoitettu asennettavaksi yksityisiin pientaloihin. Uuden tuotteen ansiosta KONE voi liittää nykyiseen vahvaan toimialaansa, eli kerrostaloihin, uuden aluevaltauksen; Pientalot. Tämä 'laajentuminen' tuo mukanaan kuluttajamarkkinoiden haasteet. Markkinatilanteen selvittämiseen käyttin jo olemassa olevaa tietoa hyväkseni; sanomalehdistä markkinatutkimuksiin. Asiakasryhmät kartoitin tutustumalla messutapahtumissa saatuihin kontakteihin. Päätutkimusmenetelmänä käytin haastatteluja. Niihin osallistui kaikkiaan 14 vastaajaa. He vasatsivat kysymyksiin ostomotiiveista ja tuotteesta. Eräs haastattelujen tärkeimmistä teemoista liittyi yhteydenpito- ja jakelukanaviin, joista 12 vastaajaa antoivat mielipiteitään. Työni tulokset viittaavat siihen, että markkinatilanne näyttää positiiviselta KONEen kannalta. Tutkimuksesta sain selville kotihissin asiakassegmentit ja myös miten nämä potentiaaliset asiakkaat saadaan tehokkaimmin tavoitettua.

Numerical and ExperimentalModelling of Gas Flow and Heat Transfer in the Air Gap of An Electric Machine

This work deals with the cooling of high-speed electric machines, such as motors and generators, through an air gap. It consists of numerical and experimental modelling of gas flow and heat transfer in an annular channel. Velocity and temperature profiles are modelled in the air gap of a high-speed testmachine. Local and mean heat transfer coefficients and total friction coefficients are attained for a smooth rotor-stator combination at a large velocity range. The aim is to solve the heat transfer numerically and experimentally. The FINFLO software, developed at Helsinki University of Technology, has been used in the flow solution, and the commercial IGG and Field view programs for the grid generation and post processing. The annular channel is discretized as a sector mesh. Calculation is performed with constant mass flow rate on six rotational speeds. The effect of turbulence is calculated using three turbulence models. The friction coefficient and velocity factor are attained via total friction power. The first part of experimental section consists of finding the proper sensors and calibrating them in a straight pipe. After preliminary tests, a RdF-sensor is glued on the walls of stator and rotor surfaces. Telemetry is needed to be able to measure the heat transfer coefficients at the rotor. The mean heat transfer coefficients are measured in a test machine on four cooling air mass flow rates at a wide Couette Reynolds number range. The calculated values concerning the friction and heat transfer coefficients are compared with measured and semi-empirical data. Heat is transferred from the hotter stator and rotor surfaces to the coolerair flow in the air gap, not from the rotor to the stator via the air gap, althought the stator temperature is lower than the rotor temperature. The calculatedfriction coefficients fits well with the semi-empirical equations and precedingmeasurements. On constant mass flow rate the rotor heat transfer coefficient attains a saturation point at a higher rotational speed, while the heat transfer coefficient of the stator grows uniformly. The magnitudes of the heat transfer coefficients are almost constant with different turbulence models. The calibrationof sensors in a straight pipe is only an advisory step in the selection process. Telemetry is tested in the pipe conditions and compared to the same measurements with a plain sensor. The magnitudes of the measured data and the data from the semi-empirical equation are higher for the heat transfer coefficients than thenumerical data considered on the velocity range. Friction and heat transfer coefficients are presented in a large velocity range in the report. The goals are reached acceptably using numerical and experimental research. The next challenge is to achieve results for grooved stator-rotor combinations. The work contains also results for an air gap with a grooved stator with 36 slots. The velocity field by the numerical method does not match in every respect the estimated flow mode. The absence of secondary Taylor vortices is evident when using time averagednumerical simulation.

Fluid flow in T-junction of pipes

The aim of this work is to study flow properties at T-junction of pipe, pressure loss suffered by the flow after passing through T-junction and to study reliability of the classical engineering formulas used to find head loss for T-junction of pipes. In this we have compared our results with CFD software packages with classical formula and made an attempt to determine accuracy of the classical formulas. In this work we have studies head loss in T-junction of pipes with various inlet velocities, head loss in T-junction of pipes when the angle of the junction is slightly different from 90 degrees and T-junction with different area of cross-section of the main pipe and branch pipe. In this work we have simulated the flow at T-junction of pipe with FLUENT and Comsol Multiphysics and observed flow properties inside the T-junction and studied the head loss suffered by fluid flow after passing through the junction. We have also compared pressure (head) losses obtained by classical formulas by A. Vazsonyi and Andrew Gardel and formulas obtained by assuming T-junction as combination of other pipe components and observations obtained from software experiments. One of the purposes of this study is also to study change in pressure loss with change in angle of T-junction. Using software we can have better view of flow inside the junction and study turbulence, kinetic energy, pressure loss etc. Such simulations save a lot of time and can be performed without actually doing the experiment. There were no real life experiments made, the results obtained completely rely on accuracy of software and numerical methods used.

Challenges and Means for the Front End Activities of Software Development

The front end of innovation is regarded as one of the most important steps in building new software products or services, and the most significant benefits in software development can be achieved through improvements in the front end activities. Problems in the front end phase have an impact on customer dissatisfaction with delivered software, and on the effectiveness of the entire software development process. When these processes are improved, the likelihood of delivering high quality software and business success increases. This thesis highlights the challenges and problems related to the early phases of software development, and provides new methods and tools for improving performance in the front end activities of software development. The theoretical framework of this study comprises two fields of research. The first section belongs to the field of innovation management, and especially to the management of the early phases of the innovation process, i.e. the front end of innovation. The second section of the framework is closely linked to the processes of software engineering, especially to the early phases of the software development process, i.e. the practice of requirements engineering. Thus, this study extends the theoretical knowledge and discloses the differences and similarities in these two fields of research. In addition, this study opens up a new strand for academic discussion by connecting these research directions. Several qualitative business research methodologies have been utilized in the individual publications to solve the research questions. The theoretical and managerial contribution of the study can be divided into three areas: 1) processes and concepts, 2) challenges and development needs, and 3) means and methods for the front end activities of software development. First, the study discloses the difference and similarities between the concepts of the front end of innovation and requirements engineering, and proposes a new framework for managing the front end of the software innovation process, bringing business and innovation perspectives into software development. Furthermore, the study discloses managerial perceptions of the similarities and differences in the concept of the front end of innovation between the software industry and the traditional industrial sector. Second, the study highlights the challenges and development needs in the front end phase of software development, especially challenges in communication, such as linguistic problems, ineffective communication channels, a communication gap between users/customers and software developers, and participation of multiple persons in software development. Third, the study proposes new group methods for improving the front end activities of software development, especially customer need assessment, and the elicitation of software requirements.

Current-phase relation in graphene Josephson junction

In this thesis, we present the results of high-frequency measurements on superconductor-graphene-superconductor junctions. We obtained the relation between the supercurrent through the junction and the superconducting phase. The relation allowed us to extract true critical current and to determine the transport regime of graphene in our SGS-junction samples at the Dirac point and away from it. An experimental temperature dependence of the current-phase relation is presented. We have calculated theoretical supercurrent-phase relation in the case of ballistic and diffusive junction. For the diffusive case, we have considered short and long limits where the coherence length is larger or smaller than the sample length, respectively.

Information exchange and disruption risk in multimodal maritime supply chains

Supply chains are becoming increasingly dependent on information ex-change in today’s world, and any disruption can cause severe repercus-sions to the flow of materials in the chain. The speed, accuracy and amount of information are key factors. The aim in this thesis is to address a gap in the research by focusing on information exchange and the risks related to it in a multimodal wood supply chain operating between the Baltic States and Finland. The study involved interviewing people engaged in logistics management in the supply chain in question. The main risk the interviewees identified arose from the sea logistics system, which held a lot of different kinds of information. The threat of breakdown in the Internet connection was also found to hinder the operations significantly. A vulnerability analysis was carried out in order to identify the main actors and channels of infor-mation flow in the supply chain. The analysis revealed that the most important and therefore most vulnerable information-exchange channels were those linking the terminal superintendent, the operative managers and the mill managers. The study gives a holistic picture of the investigated supply chain. Information-exchange-related risks varied greatly. One of the most frequently mentioned was the risk of information inaccuracy, which was usually due to the fact that those in charge of the various functions did not fully understand the consequences for the entire chain.

SOCIAL MEDIA IN INTERNATIONAL BRAND COMMUNICATION OF SMES - A multiple case study of small Finnish design-intensive companies

Social media is a rather new phenomenon which has revolutionised the world of online communication. However, academic research on how companies can benefit from social media is lacking. The research objective of this thesis was to examine the use of social media in international brand communication of small Finnish design-intensive companies. Therefore, this research contributes also to the research gap in SME branding. The focus was on communication targeted at consumers. The research was carried out as a mixed methods research employing the questionnaire and multiple case study methods. The questionnaire was used to gather preliminary information on Finnish design-intensive companies and to provide an eligible list of companies for deeper examination. Then, four case companies were studied in more depth. The empirical evidence of the case companies was mainly gathered through theme interviews. The results of the questionnaire shed light on the internationalisation of small Finnish designintensive companies. On average, the companies had internationalised rather quickly after they had been founded. However, the share of exports was rather low in most of the companies. The results revealed also that social media was already used widely in the exporting companies and the use can be expected to grow in future. The findings of the multiple case study suggest that branding activities in small Finnish designintensive companies are constrained by limited resources and skills. In addition, the branding activities are strongly guided by the vision and values of the entrepreneur(s) rather than extensive marketing research. The brand structure was simple in all case companies and they aimed at having a standardised brand image across markets. However, all case companies had faced a need for some adaptation of their international brand communication. Internationally important brand communication channels were international fairs, the internet, word-of-mouth and social media. Social media offered a cost-effective brand communication channel for the case companies. It was used for various purposes, such as creating brand awareness and affecting how the brand is perceived. The entrepreneurs found the use of social media to be rather easy and the case companies had not faced any major challenges. However, the companies had recognised that communication in social media requires consistency and planning. The planning was rather informal and stayed on a general level. Overall, the utilisation of social media in the case companies was limited by a lack of resources. It seemed to affect especially the follow-up of brand communication in social media which stayed rather superficial.

Integrating the export distribution channels after an acquisition

This thesis is based on studying integration synergies in a merger or acquisition situation with the interest in distribution channel integration. M&As seem to be forever popular and nowadays companies often use them as a certain kind of strategy to develop their business. M&As have attracted research for decades and also distribution in M&As has been found interesting. Moreover, research often concentrates to the horizontal M&A´s potential synergies that emerge in the integration process and so is the case also in this study as the core issue is to study the integration of the distribution channels and its potential synergies. This study concentrates on a single case, an acquisition which took place in 2011. The case consists of two Finnish companies operating in the same business field. Both of the companies are very export orientated, which gives this study its export view. As the companies operate in the same field this acquisition falls into the categorization of horizontal acquisition. The objective of the thesis is to study how the export channels could be integrated after an acquisition? This research question is divided again to three sub-questions asking how the distribution channels of the acquirer and acquired company are organized, what is pursued by the post-acquisition distribution channel integration and what are the integration challenges especially from the logistics point-of-view. The framework was built from the basis of the literature used in this thesis. The framework combines M&A process and distribution channels to a one united model which presents the progress of this thesis. The study was carried out as a qualitative research and as a holistic single case study. The data used in the research includes two interviews, other material from the case companies and also material of the companies collected by the author independently from different sources. There were many motives for the acquisition as usual. From the research results one can find that the integration process is still very ongoing and the synergies have not yet been fully discovered but also they are there to be found. The concentration of the research was in the export distribution which proved to be meaningful since the exports markets of the case companies were found to be quite complementary. The research results brought up also other issues concerning the post-acquisition integration process rather than the distribution channels and export. M&As are always a risky business. The final result can never be predicted. No matter how good the merging companies look on paper the practice is not the same. The acquisition process of this case has not ended yet and there lies potential synergy benefits to be discovered if enough effort is used to go through the process right.

Heading for Open Science: Filling the Knowledge Gap

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Repository Junction Broker

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Integrating Use of Customer Information Throughout Multiple Sales Channels to Create Customer Competence

Customer knowledge management (CKM) practices enable organizations to create customer competence with systematic use of customer information that is integrated throughout the organization. Nonetheless, organizations are not able to fully exploit the vast amount of data available. Previous research on use of customer information is limited especially in a multichannel environment. The aim of this study was to identify the main obstacles for utilizing customer information efficiently across multiple sales channels. The study was conducted as a single case study in order to gain deeper understanding of the research problem. The empirical findings indicate that lack of CKM practices and a common goal are major challenges obstructing effective utilization of customer information. Furthermore, decentralized organizational structure and insufficient analytical skills create obstacles for information sharing and capabilities to process information and create new knowledge. The implications of the study suggest that in order to create customer competence organizations should shift their focus from technology to the organizational factors affecting use of information and implement CKM practices throughout the organization.