Older consumers adopting information and communication technology: Evaluating opportunities for health care applications

The purpose of this dissertation is to analyse older consumers' adoption of information and communication technology innovations, assess the effect of aging related characteristic, and evaluate older consumers' willingness to apply these technologies in health care services. This topic is considered important, because the population in Finland (as in other welfare states) is aging and thus offers a possibility for marketers, but on the other hand threatens society with increasing costs for healthcare. Innovation adoption has been under research from several aspects in both organizational and consumer research. In the consumer behaviour, several theories have been developed to predict consumer responses to innovation. The present dissertation carefully reviews previous research and takes a closer look at the theory of planned behaviour, technology acceptance model and diffusion of innovations perspective. It is here suggested that there is a possibility that these theories can be combined and complemented to predict the adoption of ICT innovations among aging consumers, taking the aging related personal characteristics into account. In fact, there are very few studies that have concentrated on aging consumers in the innovation research, and thus there was a clear indent for the present research. ICT in the health care context has been studied mainly from the organizational point of view. If the technology is thus applied for the communication between the individual end-user and service provider, the end-user cannot be shrugged off. The present dissertation uses empirical evidence from a survey targeted to 55-79 year old people from one city in Southern-Carelia. The empirical analysis of the research model was mainly based on structural equation modelling that has been found very useful on estimating causal relationships. The tested models were targeted to predict the adoption stage of personal computers and mobile phones, and the adoption intention of future health services that apply these devices for communication. The present dissertation succeeded in modelling the adoption behaviour of mobile phones and PCs as well as adoption intentions of future services. Perceived health status and three components behind it (depression, functional ability, and cognitive ability) were found to influence perception of technology anxiety. Better health leads to less anxiety. The effect of age was assessed as a control variable, in order to evaluate its effect compared to health characteristics. Age influenced technology perceptions, but to lesser extent compared to health. The analyses suggest that the major determinant for current technology adoption is perceived behavioural control, and additionally technology anxiety that indirectly inhibit adoption through perceived control. When focusing on future service intentions, the key issue is perceived usefulness that needs to be highlighted when new services are launched. Besides usefulness, the perception of online service reliability is important and affects the intentions indirectly. To conclude older consumers' adoption behaviour is influenced by health status and age, but also by the perceptions of anxiety and behavioural control. On the other hand, launching new types of health services for aging consumers is possible after the service is perceived reliable and useful.

Social competence and loneliness during the school years - Issues in assessment, interrelations and intergenerational transmission

Väitöskirjassa tarkastellaan kouluikäisten lasten ja nuorten sosiaalisen kompetenssin ja yksinäisyyden mittaamista, yhteyksiä ja periytyvyyttä vanhemmilta heidän lapsilleen. Alakouluikäisten lasten tutkimusaineisto (n=985) koostuu lapsilta itseltään, heidän luokkatovereiltaan, opettajiltaan ja vanhemmiltaan vuosina 2000 - 2004 osana Merkitystä etsimässä – tutkimusprojektia (M. Vauras) kerätystä aineistosta. Mukana on itse-, toveri-, opettaja- ja vanhempien arviot lasten sosiaalisesta kompetenssista, seuranta-aineisto lasten yksinäisyydestä, opettajien arviot lasten motivationaalisesta orientaatiosta, standardoiduin testisarjoin arvioidut akateemiset taidot sekä lasten äitien ja isien arviot omasta yksinäisyydestään ja koetusta kyvykkyydestään toimia vanhempana. Yläkouluikäisten nuorten (n=386) aineisto koostuu vuosina 2006 – 2007 osana Sosioemotionaalinen oppiminen ja hyvinvointi yläkouluyhteisössä (P. M. Niemi) kerätystä nuorten yksinäisyyden, sosiaalisen ahdistuneisuuden ja sosiaalisen fobian seuranta-aineistosta. Mitattavuutta (päätavoite 1) tutkittiin erityisesti monitahoarviointien rakenteiden yhtenäisyyksiä, subjektiivisten arvioiden ajallista pysyvyyttä sekä mittareiden validiteettia ja reliabiliteettia testaamalla. Sosiaalisen kompetenssin ja yksinäisyyden keskinäisten yhteyksien lisäksi tarkasteltiin näiden yhteyttä alakoululaisten oppimiseen sekä yläkou¬lulaisten psykososiaaliseen hyvinvointiin (päätavoite 2). Kolmantena päätavoitteena oli selvittää yksinäisyyden mahdollista periytymistä vanhemmilta lapsille. Osana ensimmäistä päätavoitetta kehitettiin Monitahoarviointi sosiaalisesta kompetenssista (MASK) -arviointimenetelmä (artikkeli 1). Konfirmatorisen faktorianalyysin tulosten perusteella nelifaktorinen rakenne (prososiaalisuus sisältäen yhteistyötaidot ja empatiakyvyn sekä antisosiaalisuus sisältäen impulsiivisuuden ja häiritsevyyden) sopi sekä lasten itsensä, heidän luokkatovereidensa, opettajiensa että vanhempiensa tekemiin arviointeihin. Eri tahojen arviointien väliset korrelaatiot olivat tilastollisesti merkitseviä, joskin suhteellisen matalia, ts. eri tahojen näkökulmat lapsen sosiaalisesta kompetenssista ovat toisistaan eriäviä. Täten eri arvioitsijatahojen käyttäminen on kokonaisuuden tutkimisen kannalta tärkeää. Toisena mittaamiseen liittyvänä tavoitteena oli validoida Hozan, Bukowskin ja Beeryn (2000) sosiaalisen ja emotionaalisen yksinäisyyden mittari suomalaisille lapsille (artikkeli 3) ja nuorille (artikkeli 4) soveltuvaksi sekä tutkia, ovatko lasten ja nuorten arviot omasta yksinäisyydestään ajallisesti pysyviä. Alakoululaisten lasten osalta yksinäisyys, erityisesti sosiaalinen yksinäisyys osoittautui suhteellisen pysyväksi, mutta vahvistui entisestään yläkouluikäisten nuorten aineistoa tarkasteltaessa. Huomionarvoista sekä ala- että yläkoululaisten aineistoissa oli poikien kokema vahva emotionaalinen yksinäisyys. Molempien mittareiden osalta sekä validiteetti että reliabiliteetti todettiin hyväksyttäväksi ja niitä voidaan suositella lasten ja nuorten sosiaalisen kompetenssin ja yksinäisyyden arviointimenetelmiksi. Toisena päätavoitteena oli rakenneyhtälömallinnuksen keinoin tarkastella sosiaalisen kompetenssin ja yksinäisyyden yhteyksiä sekä keskenään (artikkelit 2 ja 3) että suhteessa lasten oppimiseen (artikkeli 2) ja nuorten psykososiaaliseen hyvinvointiin (artikkeli 4). Alakouluikäisten lasten osalta sosiaalinen kompetenssi oli yhteydessä pait¬si yksinäisyyteen myös opettajien oppilaistaan tekemiin motivationaalisen orientaation arvioihin sekä standardoiduin testien arvioituihin akateemisiin taitoihin. Yläkouluikäisten nuorten osalta yksinäisyys oli yhteydessä sosiaaliseen ahdistuneisuuteen ja sosiaaliseen fobiaan. Täten sosiaalisen kompetenssin voidaan katsoa olevan koululaisten hyvinvointia ja oppimista vahvistava, ja toisaalta yksinäisyyden nuorten psykososiaalista hyvinvointia heikentävä tekijä. Viimeisenä päätavoitteena mallinnettiin yksinäisyyden mahdollista periytyvyyttä. Ensimmäisessä vaiheessa periytyvyyttä tarkasteltiin koko perheen sisällä, vanhempien tai lasten sukupuolta erottelematta (artikkeli 2). Tässä rakenneyhtälömallissa vanhempien kokema yksinäisyys ennusti heikompaa kyvykkyydentunnetta vanhemmuudesta, joka edelleen ennusti lapsen heikompaa toveriarvioitua sosiaalista kompetenssia koulussa ja tätä kautta vahvempaa yksinäisyyden kokemusta. Toisessa mallissa eroteltiin äitien ja isien sekä tyttöjen ja poikien aineistot, jotta periytyvyyttä voitiin tarkastella äiti-tytär, äiti-poika, isä-tytär ja isä-poika dyadisuhteissa. Rakenneyhtälömallinnuksen tulosten perusteella sekä äitien että isien kokema yksinäisyys ennusti

Solving the puzzle of mobile learning adoption

The dissertation seeks to explore how to improve users‘ adoption of mobile learning in current education systems. Considering the difference between basic and tertiary education in China, the research consists of two separate but interrelated parts, which focus on the use of mobile learning in basic and tertiary education contexts, respectively. In the dissertation, two adoption frameworks are developed based on previous studies. The frameworks are then evaluated using different technologies. Concerning mobile learning use in basic education settings, case study methodology is utilized. A leading provider of mobile learning services and products in China, Noah Ltd., is investigated. Multiple sources of evidence are collected to test the framework. Regarding mobile learning adoption in tertiary education contexts, survey research methodology is utilized. Based on 209 useful responses, the framework is evaluated using structural equation modelling technology. Four proposed determinants of intention to use are evaluated, which are perceived ease of use, perceived near-term usefulness, perceived ong-term usefulness and personal innovativeness. The dissertation provides a number of new insights for both researchers and practitioners. In particular, the dissertation specifies a practical solution to deal with the disruptive effects of mobile learning in basic education, which keeps the use of mobile learning away from the schools across such as European countries. A list of new and innovative mobile learning technologies is systematically introduced as well. Further, the research identifies several key factors driving mobile learning adoption in tertiary education settings. In theory, the dissertation suggests that since the technology acceptance model is initiated in work-oriented innovations by testing employees, it is not necessarily the best model for studying educational innovations. The results also suggest that perceived longterm usefulness for educational systems should be as important as perceived usefulness for utilitarian systems, and perceived enjoyment for hedonic systems. A classification based on the nature of systems purpose (utilitarian, hedonic or educational) would contribute to a better understanding of the essence of IT innovation adoption.

Riskivastuullisuus turvallisuuskasvatuksen kulttuurissa. Oppilaiden vastuullisuus, turvallisuustaju ja tuottamistoiminnan riskiraja peruskoulun käsityön opetuksessa

Riskit ja riskittömyys uhkaavat yksilöitä, käsityötä ja yhteiskuntaa. Käsityökasvatukselleon haaste toimia kulttuurissa, joka tavoittelee täyttä riskittömyyttä. Käsityössä kasvatetaan kekseliäisyyteen ja varautumaan sen aiheuttaman riskin kohtaamiseen sekä ottamaan siitä vastuuta. Tämän tutkimuksen tehtävänä on riskivastuullisuuden mallin rakentamiseksi selvittää, kuinka oppilaiden vastuullisuus selittää riskirajaa käsityön turvallisuuskasvatuksen kulttuurissa. Välinearvojen saavuttamiseksi on siedettävä välineriskiä, joka ei ylitä turvallisuuskulttuurin riskirajaa. Välinearvot ovat välineiden laatua lisääviä ominaisuuksia, joilla pyritään peittämään välineriskejä. Siedettävän riskin rajan ratkaisemiseen tarvitaan tietoa käsityön tuottamisesta ja todellisuutta havainnoivien tiedonalojen tietoa. Viime kädessä ratkaisu tehdään rakentavalla ajattelulla, johon kuuluu välinearvojen tavoittelua ohjaava käsityötaju ja välineriskeihin varautumista ohjaava turvallisuustaju. Käsityössä onnistuminen kannustaa kohti uusia haasteita ja epäonnistumisen riski asettuu mittasuhteisiinsa. Kekseliäässä käsityön kulttuurissa kokeillaan omia ja ympäröivän todellisuuden mahdollisuuksia ottamalla oivaltaen riskejä, jotka saavat aikaan rakentavan kokemuksen riskistä. Käsityö on riskioivallusten oppiaine. Tutkimustehtävän toteuttamiseksi tässä tutkimuksessa rakennetaan uusi riskivastuullisuuden malli, jossa vastuullisuus selittää riskirajaa. Mallin vastaavuutta selvitetään valtakunnallisesti peruskoulun käsityön 6. ja 9. luokan käsityön opetuksessa (n = 393). Aineisto on analysoitu rakenneyhtälöanalyysein konfirmatorisella faktorianalyysilla ja polkumallinnuksella. Tutkimusaineisto ja riskivastuullisuuden malli vastaavat toisiaan. Vastuullisuuden selitysosuus turvallisuustajun ja käsityötajun ratkaisemasta riskirajasta on mallin mukaan 35 %. Oppilaat osoittivat tuntevansa oman tuottamisensa vaikutuksia ja vastuuta niistä. Vastuullisuus osoittautui tärkeäksi riskirajan selittäjäksi, joten käsityön turvallisuuskasvatuksen kulttuuri voi kohota uudelle tasolle riskivastuulliseksi. Käsityön turvallisuuskasvatus on kokonaisvaltaista turvallisuustajun kasvatusta. Riskivastuullisuus luo turvallisuuskulttuuriin yhteisen käsityksen siedettävän riskin rajasta. Oppilaiden mahdollisuuksia kekseliääseen tutkivaan tuottamiseen on vahvistettava eikä rajoitettava. Riskivastuullisessa käsityön turvallisuuskasvatuksen kulttuurissa opettajan tehtävänä ei ole estää mitään tapahtumasta vaan saada mahdollisimman paljon tapahtumaan, sillä vastuullisuus kasvaa vastuuta ottamalla. Se on kasvatuksen – käsityökasvatuksen – keino turvallisuustyössä.

Motivational Influences on Transfer: Dimensions and Boundary Conditions

The focus of this dissertation is the motivational influences on transfer in higher education and professional training contexts. To estimate these motivational influences, the dissertation includes seven individual studies that are structured in two parts. Part I, Dimensions, aims at identifying the dimensionality of motivation to transfer and its structural relations with training-related antecedents and outcomes. Part II, Boundary Conditions, aims at testing the predictive validity of motivation theories used in contemporary training research under different study conditions. Data in this dissertation was gathered from multi-item questionnaires, which were analyzed differently in Part I and Part II. Studies in Part I employed exploratory and confirmatory factor analysis, structural equation modeling, partial least squares (PLS) path modeling, and mediation analysis. Studies in Part II used artifact distribution meta-analysis, (nested) subgroup analysis, and weighted least squares (WLS) multiple regression. Results demonstrate that motivation to transfer can be conceptualized as a three-dimensional construct, including autonomous motivation to transfer, controlled motivation to transfer, and intention to transfer, given a theoretical framework informed by expectancy theory, self-determination theory, and the theory of planned behavior. Results also demonstrate that a range of boundary conditions moderates motivational influences on transfer. To test the predictive validity of expectancy theory, social cognitive theory, and the theory of goal orientations under different study settings, a total of 17 boundary conditions were meta-analyzed, including age; assessment criterion; assessment source; attendance policy; collaboration among trainees; computer support; instruction; instrument used to measure motivation; level of education; publication type; social training context; SS/SMC bias; study setting; survey modality; type of knowledge being trained; use of a control group; and work context. Together, the findings cumulated in this thesis support the basic premise that motivation is centrally important for transfer, but that motivational influences need to be understood from a more differentiated perspective than commonly found in the literature, in order to account for several dimensions and boundary conditions. The results of this dissertation across the seven individual studies are reflected in terms of their implications for theory development and their significance for training evaluation and the design of training environments. Limitations and directions to take in future research are discussed.

Modelling of hydrogen stratification and gas mixing in containment using the APROS code

Hydrogen stratification and atmosphere mixing is a very important phenomenon in nuclear reactor containments when severe accidents are studied and simulated. Hydrogen generation, distribution and accumulation in certain parts of containment may pose a great risk to pressure increase induced by hydrogen combustion, and thus, challenge the integrity of NPP containment. The accurate prediction of hydrogen distribution is important with respect to the safety design of a NPP. Modelling methods typically used for containment analyses include both lumped parameter and field codes. The lumped parameter method is universally used in the containment codes, because its versatility, flexibility and simplicity. The lumped parameter method allows fast, full-scale simulations, where different containment geometries with relevant engineering safety features can be modelled. Lumped parameter gas stratification and mixing modelling methods are presented and discussed in this master’s thesis. Experimental research is widely used in containment analyses. The HM-2 experiment related to hydrogen stratification and mixing conducted at the THAI facility in Germany is calculated with the APROS lump parameter containment package and the APROS 6-equation thermal hydraulic model. The main purpose was to study, whether the convection term included in the momentum conservation equation of the 6-equation modelling gives some remarkable advantages compared to the simplified lumped parameter approach. Finally, a simple containment test case (high steam release to a narrow steam generator room inside a large dry containment) was calculated with both APROS models. In this case, the aim was to determine the extreme containment conditions, where the effect of convection term was supposed to be possibly high. Calculation results showed that both the APROS containment and the 6-equation model could model the hydrogen stratification in the THAI test well, if the vertical nodalisation was dense enough. However, in more complicated cases, the numerical diffusion may distort the results. Calculation of light gas stratification could be probably improved by applying the second order discretisation scheme for the modelling of gas flows. If the gas flows are relatively high, the convection term of the momentum equation is necessary to model the pressure differences between the adjacent nodes reasonably.

Modelling the simultaneous effects of intellectual capital and knowledge management on the organisational performance of Finnish companies

The aim of this study was to contribute to the current knowledge-based theory by focusing on a research gap that exists in the empirically proven determination of the simultaneous but differentiable effects of intellectual capital (IC) assets and knowledge management (KM) practices on organisational performance (OP). The analysis was built on the past research and theoreticised interactions between the latent constructs specified using the survey-based items that were measured from a sample of Finnish companies for IC and KM and the dependent construct for OP determined using information available from financial databases. Two widely used and commonly recommended measures in the literature on management science, i.e. the return on total assets (ROA) and the return on equity (ROE), were calculated for OP. Thus the investigation of the relationship between IC and KM impacting OP in relation to the hypotheses founded was possible to conduct using objectively derived performance indicators. Using financial OP measures also strengthened the dynamic features of data needed in analysing simultaneous and causal dependences between the modelled constructs specified using structural path models. The estimates were obtained for the parameters of structural path models using a partial least squares-based regression estimator. Results showed that the path dependencies between IC and OP or KM and OP were always insignificant when analysed separate to any other interactions or indirect effects caused by simultaneous modelling and regardless of the OP measure used that was either ROA or ROE. The dependency between the constructs for KM and IC appeared to be very strong and was always significant when modelled simultaneously with other possible interactions between the constructs and using either ROA or ROE to define OP. This study, however, did not find statistically unambiguous evidence for proving the hypothesised causal mediation effects suggesting, for instance, that the effects of KM practices on OP are mediated by the IC assets. Due to the fact that some indication about the fluctuations of causal effects was assessed, it was concluded that further studies are needed for verifying the fundamental and likely hidden causal effects between the constructs of interest. Therefore, it was also recommended that complementary modelling and data processing measures be conducted for elucidating whether the mediation effects occur between IC, KM and OP, the verification of which requires further investigations of measured items and can be build on the findings of this study.

The Impact of Service Quality and Relationship Quality on Customer Loyalty in Business-to-Business Context

The main objective of this Master’s Thesis was to examine the interrelations of service quality and relationship quality (customer satisfaction, trust and commitment), and find out are they antecedents for customer loyalty in business-to-business context. Literature review revealed some research gaps concerning these focal concepts, which should be studied more closely. The theoretical basis for this research was collected for evaluating a strategic increase of customer’s perceptions of service quality and relationship quality as well as customer loyalty in business-to-business environment, and it was tested empirically in a sample of 164 corporate customers, who responded to the Internet-based survey. The measures, used in the survey, were first assessed by using confirmatory factor analysis (CFA), and then the hypothesized relationships were further verified using structural equation modeling (SEM) in LISREL 8.80. There was found support for a half of the hypothesized construct relations. The results of the research confirm the direct influence of trust and commitment on customer loyalty. Also, service quality turned out to have an indirect impact on customer loyalty through trust. No support, however, was offered for the proposed impact of customer satisfaction on loyalty in this case. The research provides managerially relevant and actionable results that may help service providers execute more specific customer relationship quality strategies that lead to higher customer loyalty.

The Effects of Service Quality, Customer Satisfaction and Customer Perceived Value on Behavioral Intentions

The intent of this research was to develop a model that describes the extent to which customer behavioral intentions are influenced by service quality, customer satisfaction and customer perceived value in the business-to-business service context. Research on customer behavioral intentions is quite fragmented and no generalized model has been presented. Thus, there was need for empirical testing. This study builds on the services marketing theory and assesses the relationships between the identified constructs. The data for the empirical analysis was collected via a quantitative online survey and a total of 226 usable responses were obtained for further analysis. The model was tested in an employment agency service setting. The measures used in this survey were first assessed by using confirmatory factor analysis (CFA) after which the hypothesized relationships were further verified using structural equation modeling (SEM) in LISREL 8.80. The analysis identified that customer satisfaction played a pivotal role in the model as it was the only direct antecedent of customer behavioral intentions, however, customer perceived value showed a strong indirect impact on buying intentions via customer satisfaction. In contrast to what was hypothesized, service quality and customer perceived value did not have a direct positive effect on behavioral intentions. Also, a contradicting finding with current literature was that sacrifice was argued to have a direct but positive impact on customer perceived value. Based on the findings in this study, managers should carefully think of their service strategies that lead to their customers’ favorable behavioral intentions.

Factors Affecting Consumer Investment Intentions. Empirical Evidence from Finland

The thesis aims to build a theoretical model to explain consumer investment intentions in stocks and investment funds. The model examines the relationships between subjective investment knowledge, expected sacrifice, expected investment value, compatibility, perceived behavioral control and investment intentions. The data was collected via web-based survey and consisted of 45- to 65-year-old Finnish consumers (n=154). Confirmatory factor analysis (CFA), structural equation modeling (SEM) and t-tests were applied in analyzing the data. The results suggest that among average household consumers expected investment value consists of three dimensions, namely, economic, functional, and emotional, whereas expected sacrifice consists of effort, financial risk, source risk, and psychological risk. Two structural models were assessed, one for stock investments and one for investment funds. Whereas the models presented somewhat different outcomes, in both models compatibility had an essential role in explaining consumer investment intentions. Compatibility was affected by expected investment value and expected sacrifice. Subjective investment knowledge impacted consumers’ evaluations of the value and sacrifices. The effect of perceived behavioral control on investment intentions was rather small, however significant. Moreover, the results suggest that there are significant differences between consumers with no investment experience and consumers with investment experience in subjective investment knowledge, the dimensions of expected sacrifices and expected investment value, perceived behavioral control, compatibility and investment intentions.

Structural modelling of liquid ZrO2 and glassy B2O3 by using AB INITIO Molecular Dynamics method

Atomic structure of ZrO2 and B2O3 was investigated in this work. New data under extreme conditions (T = 3100 K) was obtained for the liquid ZrO2 structure. A fractional number of boron was investigated for glassy structure of B2O3. It was shown that it is possible to obtain an agreement for the fractional number between NMR and DFT techniques using a suitable initial configuration.

Minimization of the experimental workload for the prediction of pollutants propagation in rivers. Mathematical modelling and knowledge re-use

The present thesis in focused on the minimization of experimental efforts for the prediction of pollutant propagation in rivers by mathematical modelling and knowledge re-use. Mathematical modelling is based on the well known advection-dispersion equation, while the knowledge re-use approach employs the methods of case based reasoning, graphical analysis and text mining. The thesis contribution to the pollutant transport research field consists of: (1) analytical and numerical models for pollutant transport prediction; (2) two novel techniques which enable the use of variable parameters along rivers in analytical models; (3) models for the estimation of pollutant transport characteristic parameters (velocity, dispersion coefficient and nutrient transformation rates) as functions of water flow, channel characteristics and/or seasonality; (4) the graphical analysis method to be used for the identification of pollution sources along rivers; (5) a case based reasoning tool for the identification of crucial information related to the pollutant transport modelling; (6) and the application of a software tool for the reuse of information during pollutants transport modelling research. These support tools are applicable in the water quality research field and in practice as well, as they can be involved in multiple activities. The models are capable of predicting pollutant propagation along rivers in case of both ordinary pollution and accidents. They can also be applied for other similar rivers in modelling of pollutant transport in rivers with low availability of experimental data concerning concentration. This is because models for parameter estimation developed in the present thesis enable the calculation of transport characteristic parameters as functions of river hydraulic parameters and/or seasonality. The similarity between rivers is assessed using case based reasoning tools, and additional necessary information can be identified by using the software for the information reuse. Such systems represent support for users and open up possibilities for new modelling methods, monitoring facilities and for better river water quality management tools. They are useful also for the estimation of environmental impact of possible technological changes and can be applied in the pre-design stage or/and in the practical use of processes as well.

Environmental inFluences on the Adoption of Open Innovation: Analysis of Structural, Institutional and Cultural Impacts

The concept of open innovation has recently gained widespread attention, and is particularly relevant now as many firms endeavouring to implement open innovation, face different sets of challenges associated with managing it. Prior research on open innovation has focused on the internal processes dealing with open innovation implementation and the organizational changes, already taking place or yet required in companies order to succeed in the global open innovation market. Despite the intensive research on open innovation, the question of what influences its adoption by companies in different contexts has not received much attention in studies. To fill this gap, this thesis contribute to the discussion on open innovation influencing factors by bringing in the perspective of environmental impacts, i.e. gathering data on possible sources of external influences, classifying them and testing their systemic impact through conceptual system dynamics simulation model. The insights from data collection and conceptualization in modelling are used to answer the question of how the external environment affects the adoption of open innovation. The thesis research is presented through five research papers reflecting the method triangulation based study (conducted at initial stage as case study, later as quantitative analysis and finally as system dynamics simulation). This multitude of methods was used to collect the possible external influence factors and to assess their impact (on positive/negative scale rather than numerical). The results obtained throughout the thesis research bring valuable insights into understanding of open innovation influencing factors inside a firm’s operating environment, point out the balance required in the system for successful open innovation performance and discover the existence of tipping point of open innovation success when driven by market dynamics and structures. The practical implications on how firms and policy-makers can leverage environment for their potential benefits are offered in the conclusions.

Simulation methods in the modelling of bioaffinity assays

Computational model-based simulation methods were developed for the modelling of bioaffinity assays. Bioaffinity-based methods are widely used to quantify a biological substance in biological research, development and in routine clinical in vitro diagnostics. Bioaffinity assays are based on the high affinity and structural specificity between the binding biomolecules. The simulation methods developed are based on the mechanistic assay model, which relies on the chemical reaction kinetics and describes the forming of a bound component as a function of time from the initial binding interaction. The simulation methods were focused on studying the behaviour and the reliability of bioaffinity assay and the possibilities the modelling methods of binding reaction kinetics provide, such as predicting assay results even before the binding reaction has reached equilibrium. For example, a rapid quantitative result from a clinical bioaffinity assay sample can be very significant, e.g. even the smallest elevation of a heart muscle marker reveals a cardiac injury. The simulation methods were used to identify critical error factors in rapid bioaffinity assays. A new kinetic calibration method was developed to calibrate a measurement system by kinetic measurement data utilizing only one standard concentration. A nodebased method was developed to model multi-component binding reactions, which have been a challenge to traditional numerical methods. The node-method was also used to model protein adsorption as an example of nonspecific binding of biomolecules. These methods have been compared with the experimental data from practice and can be utilized in in vitro diagnostics, drug discovery and in medical imaging.

Modelling of ultrasound assisted mixing in Newtonian and non-Newtonian liquids

The purpose of this work is to obtain a better understanding of behaviour of possible ultrasound appliance on fluid media mixing. The research is done in the regard to Newtonian and non-Newtonian fluids. The process of ultrasound appliance on liquids is modelled in COMSOL Multiphysics software. The influence of ultrasound using is introduced as waveform equation. Turbulence modelling is fulfilled by the k-ε model in Newtonian fluid. The modeling of ultrasound assisted mixing in non-Newtonian fluids is based on the power law. To verify modelling results two practical methods are used: Particle Image Velocimetry and measurements of mixing time. Particle Image Velocimetry allows capturing of velocity flow field continuously and presents detailed depiction of liquid dynamics. The second way of verification is the comparison of mixing time of homogeneity. Experimentally achievement of mixing time is done by conductivity measurements. In modelling part mixing time is achieved by special module of COMSOL Multiphysics – the transport of diluted species. Both practical and modelling parts show similar radial mechanism of fluid flow under ultrasound appliance – from the horn tip fluid moves to the bottom and along the walls goes back. Velocity profiles are similar in modelling and experimental part in the case of Newtonian fluid. In the case of non-Newtonian fluid velocity profiles do not agree. The development track of ultrasound-assisted mixing modelling is presented in the thesis.