Distributed document migration between ERP systems by means of messaging and event sourcing

This bachelor’s thesis, written for Lappeenranta University of Technology and implemented in a medium-sized enterprise (SME), examines a distributed document migration system. The system was created to migrate a large number of electronic documents, along with their metadata, from one document management system to another, so as to enable a rapid switchover of an enterprise resource planning systems inside the company. The paper examines, through theoretical analysis, messaging as a possible enabler of distributing applications and how it naturally fits an event based model, whereby system transitions and states are expressed through recorded behaviours. This is put into practice by analysing the implemented migration systems and how the core components, MassTransit, RabbitMQ and MongoDB, were orchestrated together to realize such a system. As a result, the paper presents an architecture for a scalable and distributed system that could migrate hundreds of thousands of documents over weekend, serving its goals in enabling a rapid system switchover.

The Design and Implementation of a SD Card File System

SD card (Secure Digital Memory Card) is widely used in portable storage medium. Currently, latest researches on SD card, are mainly SD card controller based on FPGA (Field Programmable Gate Array). Most of them are relying on API interface (Application Programming Interface), AHB bus (Advanced High performance Bus), etc. They are dedicated to the realization of ultra high speed communication between SD card and upper systems. Studies about SD card controller, really play a vital role in the field of high speed cameras and other sub-areas of expertise. This design of FPGA-based file systems and SD2.0 IP (Intellectual Property core) does not only exhibit a nice transmission rate, but also achieve the systematic management of files, while retaining a strong portability and practicality. The file system design and implementation on a SD card covers the main three IP innovation points. First, the combination and integration of file system and SD card controller, makes the overall system highly integrated and practical. The popular SD2.0 protocol is implemented for communication channels. Pure digital logic design based on VHDL (Very-High-Speed Integrated Circuit Hardware Description Language), integrates the SD card controller in hardware layer and the FAT32 file system for the entire system. Secondly, the document management system mechanism makes document processing more convenient and easy. Especially for small files in batch processing, it can ease the pressure of upper system to frequently access and process them, thereby enhancing the overall efficiency of systems. Finally, digital design ensures the superior performance. For transmission security, CRC (Cyclic Redundancy Check) algorithm is for data transmission protection. Design of each module is platform-independent of macro cells, and keeps a better portability. Custom integrated instructions and interfaces may facilitate easily to use. Finally, the actual test went through multi-platform method, Xilinx and Altera FPGA developing platforms. The timing simulation and debugging of each module was covered. Finally, Test results show that the designed FPGA-based file system IP on SD card can support SD card, TF card and Micro SD with 2.0 protocols, and the successful implementation of systematic management for stored files, and supports SD bus mode. Data read and write rates in Kingston class10 card is approximately 24.27MB/s and 16.94MB/s.

Semantiikan hyödyntäminen dokumenttienhallinnassa

Työn tavoitteena on etsiä asiakasyritykselle sähköteknisen dokumentoinnin hallintaan sopiva järjestelmäratkaisu vertailemalla insinööritoimistojen käyttämien suunnittelujärjestelmien ja yleisten dokumenttien hallintajärjestelmien soveltuvuutta asiakasympäristöön. Työssä tutkitaan sopivien metatietojen kuvaustapojen käyttökelpoisuutta sähköteknisen dokumentoinnin hallintaan esimerkkiprojektien avulla. Työn sisältö koostuu neljästä pääkohdasta. Ensimmäisessä jaksossa tarkastellaan dokumentin ominaisuuksia ja elinkaarta luonnista aktiivikäyttöön, arkistointiin ja hävitykseen. Samassa yhteydessä kerrotaan dokumenttienhallinnan perustehtävistä. Toisessa jaksossa käsitellään dokumenttien kuvailun tavoitteita, kuvailusuosituksia ja -standardeja sekä luonnollisen kielen käyttöä sisällönkuvailussa. Tarkastelukohteina suosituksista ovat W3C:n julkaisemat suositukset, Dublin Core, JHS 143 ja SFS-EN 82045. Kolmannessa jaksossa tarkastellaan teollisuuden dokumentoinnin ominaispiirteitä ja käyttötarkoitusta. Teollisuudessa on monia erilaisia järjestelmäympäristöjä tehtaan sisällä ja työssä kuvataan dokumenttienhallinnan integrointitarpeita muihin järjestelmiin. Viimeisessä jaksossa kuvaillaan erilaisia dokumentoinnin hallintaympäristöjä alkaen järeimmästä päästä tuotetiedon hallintajärjestelmistä siirtyen pienempiinsuunnittelujärjestelmiin ja lopuksi yleisiin dokumenttien hallintajärjestelmiin. Tässä osassa on myös luettelo ohjelmistotoimittajista. Työn tuloksena on laadittu valituista dokumenttityypeistä metatietokuvaukset kahden eri kuvaustavan (JHS 143 ja SFS-EN 82045) avulla ja on todettu molemmat kuvaustavat käyttökelpoisiksi sähköteknisen dokumentoinnin käsittelyyn.Nämä kuvaukset palvelevat asiakasta dokumenttienhallintaprojektin määrittelytyössä. Asiakkaalle on tehty myös vertailu sopivista järjestelmävaihtoehdoista hankintaa varten.

Informaation hallinta prosessiteollisuuden investointiprojektissa

Diplomityössä on tutkittu kohdeyrityksen, UPM-Kymmene Oyj Kymin tuotantoyksikön nykyisiä investointiprojektin tiedonhallinnan käytäntöjä. Nykytilan selvityksen ja haastatteluissa ilmenneiden tarpeiden perusteella on työssä esitelty uusi toimintamalli tulevia investointiprojekteja varten. Diplomityö perustuu aihepiirin kirjalliseen tarkasteluun ja yhteistyökumppaneiden haastatteluihin. Kirjallisuuden avulla on selvitetty dokumenttienhallinnan teoriaa ja tulevaisuuden näkymiä. Haastatteluilla on selvitetty Kymin tiedonhallinnan nykytilaa ja tulevia tarpeita. Haastatteluita on tehty Kymillä sisäisesti ja Kymin konsultti- ja laitetoimittajaosapuolten kanssa. Työssä käsitellään informaationhallintaa dokumenttienhallinnan ja erilaisten investointiprojektissa käsiteltävien dokumenttien pohjalta. Investointiprojektissa syntyvän talletettavan ja arkistoitavan dokumenttiaineiston lisäksi huomioidaan laitetietojen hallinta, mutta vain periaatteellisella tasolla. Investointiprojektin tiedonhallinnassa ehdotetaan siirryttävän perinteisestä eri projektiosapuolten keskinäisestä tiedonvaihdosta verkottuneeseen tiedonhallinnan malliin. Verkottuneessa tiedonhallinnassa toimitaan investointiprojektin osapuolten yhteisen tietovaraston avulla. Työn tuloksena syntynyt kohdeyrityksen toimintamalli koostuu useista eri osa-alueista, mikä mahdollistaa toimintamallin hyödyntämisen yksittäisiä osa-alueita kokonaisuudesta irrottamalla. Toimintamallia on mahdollista hyödyntää vastaavanlaisten tuotanto-laitosten investointiprojektien yhteydessä. Työssä toimintamallin käytännön sovellutus kohdeyrityksessä on esitetty käyttöönottoprojektina.

management as a part of product lifecycle management

Tässä työssä käsitellään maailmanlaajuisen paperi- ja sellutehtaille laitteita toimittavan yrityksen Andritz:in dokumenttien hallintaa, keskittyen lähinnä yrityksen service- liiketoiminnan ja tuotteen elinkaaren hallinnan tarpeisiin. Tarkoituksena on selvittää kuinka aikaisemmin yritykselle muihin tarkoituksiin valittu dokumenttien hallinta-järjestelmä sopii Service-liiketoiminnan tarpeisiin. Työ perustuu kirjallisuutteen sekä tekijän työn ohella sekä haastatteluin keräämään näkemykseen liiketoiminnasta tällä alalla. Työssä käsitellään yleisellä tasolla dokumenttien hallintajärjestelmiä, niiden rakennetta ja perusominaisuuksia, sekä esitellään markkinoilla olevia erityylisiä ratkaisuja. Työssä esitellään myös Andritz:in dokumenttien hallinnan nykytilaa, tuotteen elinkaaren päävaiheet, dokumenttien hallinnan merkitys niissä ja nykyisin käytössä oleva dokumenttien hallintajärjestelmä. Näiden rinnalla pyritään tuomaan esille Service- liiketoiminnan erityispiirteet ja tarpeet dokumenttien hallinnalle niiden kannalta. Työhön on sisällytetty myös käytännön esimerkki dokumenttien hallinnasta suuressa käynnissä olevassa projektissa. Projektissa käytetään dokumenttihotelli palvelua dokumenttien projektin aikaiseen hallintaan. Hotellissa olevat dokumentit tulee siirtää myös Andritzin omaan järjestelmään, tämä siirto on tehty osana työtä.

Sähköverkkoyhtiön dokumenttien hallinta

Työssä on tutkittu sähköverkkoyhtiön dokumenttien hallintaa, pääosin keskittymällä käytännön dokumentoinnin tilaan ja sen kehittämiseen. Tutkimus perustuu kirjallisuuteen ja haastatteluihin. Kirjallisuuden avulla on selvitetty työn aihepiirin teoriaa. Haastattelujen avulla on kartoitettu dokumentoinnin nykytilaa ja siihen liittyviä ongelmia sekä alalla yleisesti käytössä olevia toimintatapoja. Työssä on käyty läpi dokumenttien hallinnan perusperiaatteet, menetelmät ja dokumentoinnin rooli sähköverkkoyhtiössä. Erityisesti huomiota on kiinnitetty Helsingin Energian HelenVerkko liiketoiminnon dokumentointiin selvittämällä nykytilaa sekä eri yksiköiden vastuualueita ja toimintatapoja. Myös sähköverkkoyhtiön palveluntuottajien roolia on pohdittu dokumentoinnin kannalta. Nykytilanselvityksen perusteella on koottu dokumenttiluettelo, josta ilmenee mitä dokumentteja HelenVerkossa on käytössä. Työssä on esitelty yleisellä tasolla dokumenttienhallintajärjestelmiin liittyviä toiminnallisuuksia sekä kuvattu muutamia referenssiympäristöjä järjestelmien käytöstä. Työn tuloksena on kuvattu sähköverkkoyhtiölle suositeltava dokumenttien hallinnan toimintatapa sekä kuvattu projektisuunnitelman muodossa, miten kyseisessä esimerkkitapauksessa nykytilasta päästään tavoitetilaan. Dokumenttienhallintaprojektin tavoitteena on kehittää HelenVerkon dokumenttien hallintaa toimivammaksi ja käyttöönottaa dokumenttienhallintajärjestelmä.

Dokumentinhallinta verkottuneessa teollisuusympäristössä

Dokumentinhallintajärjestelmien kehittyessä vuosi vuodelta voi yritykselle tulla aiheelli-seksi vaihtaa jo käytössä oleva dokumentinhallinjärjestelmä uuteen. Tällaisessa tilanteessa katsotaan uuden järjestelmän hyödyn olevan suurempi kuin dokumentinhallinjärjestelmän vaihdosta koituvat kustannukset. Myös yhtiön sisäisen rakenteen tai toimintamallien muu-tos voi aiheellistaa dokumentinhallintajärjestelmän vaihtoon. Suurimpia haasteita dokumentinhallijärjestelmästä toiseen siirtymisessä oli dokumentin mukana tulevien ominaisuuksien (attributes) muuntamisessa uuden dokumentinhallijärjes-telmän mukaisiksi. Ominaisuuksien muuttamisella optimoidaan hyötyä, jota dokumentin-hallintajärjestelmän vaihdosta saadaan. Tämä kuitenkin pidentää dokumentinhallijärjestel-mien siirtoaikaa. Jotta siirtoaikaa voitaisiin lyhentää, oli luotava muunnostaulukoita joiden mukaan teknisten dokumenttien ominaisuuksia muutetaan uuteen muotoon. Näitä muunnostaulukoita tulkit-sevat pääasiassa muunnokseen kehitetyt ohjelmat, mutta vaikeissa tapauksissa muunnok-sen joutuu hoitamaan ihminen. Siirron yhteydessä päätavoitteena on kuitenkin informaati-on säilyminen tai jopa sen kasvattaminen, vaikka se työtä hidastaisikin. Kasvavassa teollisuusyrityksessä teknisten dokumenttien versiointivauhti on kova ja koska dokumentteja versioi yleensä myös jokin ulkopuolinen taho, on dokumenttien liikenne suurta myös yrityksen dokumentinhallintajärjestelmän ulkopuolella. Dokumentit voivat liikkua joko kahden eri verkossa olevan dokumentinjärjestelmän välillä tai dokumenteilla voi olla jokin ulkoinen sijoituspaikka versioinnin aikana. Täten on yrityksen otettava huo-mioon myös dokumentinhallijärjestelmän ulkopuolinen dokumentinhallinta.

Tuotannon kehitysinvestointiprojektien läpivientimalli

Tämän diplomityön tarkoituksena oli tutkia ja etsiä kehityskohteita kohdeyrityksen kehitysinvestointiprojektien toimintamallissa. Diplomityön tavoitteena oli tutkia nykyistä investointikäytäntöä ja luoda eri linjastoissa tehtäville kehitysinvestointiesityksille edellytykset tukea yhteisesti yrityksen tulevia suhdannenäkymiä ja strategiaa. Työn tavoitteena oli myös pyrkiä välillisesti kasvattamaan investointiin sijoitettavan pääoman tuottoprosenttia pienentämällä kustannuksia huolellisen valmistelun keinoin jo investointiprojektin kehityksen alkuvaiheessa. Työkaluksi tähän todettiin olevan läpivientimalli. Tutkimusmenetelminä käytettiin kvantitatiivisia ja kvalitatiivisia tiedonkeruumenenelmiä. Näistä ylemmän johdon ja keskijohdon haastattelut, sekä omat kokemukset yrityksen käytännöistä vuosilta 2004-2008 näyttelivät pääroolia. Työn tuotoksena laadittiin aiheeseen liittyvä ohjeistus ja läpivientimalli osaksi yrityksen laatujärjestelmää. Malli sijoitettiin template tyyppisesti dokumentinhallinnointiohjelmistoon. Työn tuloksena on esitetty kehitysinvestointiprojektien läpivientimalli siten, että se tukee yrityksen strategiaa kestävän kehityksen ympäröimänä. Työlle asetetut tavoitteet saavutettiin sille tarkoitetussa aikavälissä.

The intrinsic mechanisms of softwood fiber damage in brown stock fiber line unit operations Lappeenranta 2010

The effects of pulp processing on softwood fiber properties strongly influence the properties of wet and dry paper webs. Pulp strength delivery studies have provided observations that much of the strength potential of long fibered pulp is lost during brown stock fiber line operations where the pulp is merely washed and transferred to the subsequent processing stages. The objective of this work was to study the intrinsic mechanisms which maycause fiber damage in the different unit operations of modern softwood brown stock processing. The work was conducted by studying the effects of industrial machinery on pulp properties with some actions of unit operations simulated in laboratory scale devices under controlled conditions. An optical imaging system was created and used to study the orientation of fibers in the internal flows during pulp fluidization in mixers and the passage of fibers through the screen openings during screening. The qualitative changes in fibers were evaluated with existing and standardized techniques. The results showed that each process stage has its characteristic effects on fiber properties: Pulp washing and mat formation in displacement washers introduced fiber deformations especially if the fibers entering the stage were intact, but it did not decrease the pulp strength properties. However, storage chests and pulp transfer after displacement washers contributed to strength deterioration. Pulp screening proved to be quite gentle, having the potential of slightly evening out fiber deformations from very deformed pulps and vice versa inflicting a marginal increase in the deformation indices if the fibers were previously intact. Pulp mixing in fluidizing industrial mixers did not have detrimental effects on pulp strength and had the potential of slightly evening out the deformations, provided that the intensity of fluidization was high enough to allow fiber orientation with the flow and that the time of mixing was short. The chemical and mechanical actions of oxygen delignification had two distinct effects on pulp properties: chemical treatment clearly reduced pulp strength with and without mechanical treatment, and the mechanical actions of process machinery introduced more conformability to pulp fibers, but did not clearly contribute to a further decrease in pulp strength. The chemical composition of fibers entering the oxygen stage was also found to affect the susceptibility of fibers to damage during oxygen delignification. Fibers with the smallest content of xylan were found to be more prone to irreversibledeformations accompanied with a lower tensile strength of the pulp. Fibers poor in glucomannan exhibited a lower fiber strength while wet after oxygen delignification as compared to the reference pulp. Pulps with the smallest lignin content on the other hand exhibited improved strength properties as compared to the references.

Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

Diet, microbes and gut immune responses in the pathogenesis of experimental type 1 diabetes

Type 1diabetes (T1D) is an autoimmune disease, which is influenced by a variety of environmental factors including diet and microbes. These factors affect the homeostasis and the immune system of the gut. This thesis explored the altered regulation of the immune system and the development of diabetes in non-obese diabetic (NOD) mice. Inflammation in the entire intestine of diabetes-prone NOD mice was studied using a novel ex-vivo imaging system of reactive oxygen and nitrogen species (RONS), in relation to two feeding regimens. In parallel, gut barrier integrity and intestinal T-cell activation were assessed. Extra-intestinal manifestations of inflammation and decreased barrier integrity were sought for by studying peritoneal leukocytes. In addition, the role of pectin and xylan as dietary factors involved in diabetes development in NOD mice was explored. NOD mice showed expression of RONS especially in the distal small intestine, which coincided with T-cell activation and increased permeability to macromolecules. The introduction of a casein hydrolysate (hydrolysed milk protein) diet reduced these phenomena, altered the gut microbiota and reduced the incidence of T1D. Extra-intestinally, macrophages appeared in large numbers in the peritoneum of NOD mice after weaning. Peritoneal macrophages (PM) expressed high levels of interleukin-1 receptor associated kinase M (IRAK-M), which was indicative of exposure to ligands of toll-like receptor 4 (TLR-4) such as bacterial lipopolysaccharide (LPS). Intraperitoneal LPS injections activated T cells in the pancreatic lymph nodes (PaLN) and thus, therefore potentially could activate islet-specific T cells. Addition of pectin and xylan to an otherwise diabetes-retarding semisynthetic diet affected microbial colonization of newly-weaned NOD mice, disturbed gut homeostasis and promoted diabetes development. These results help us to understand how diet and microbiota impact the regulation of the gut immune system in a way that might promote T1D in NOD mice.

Brain imaging studies in severe somatization

Somatization was described 4000 years ago but the pathophysiology of the, phenomenon is unknown. The aim of this investigation was to explore whether central nervous system (CNS) pathology is associated with severe somatization which was operationalized as somatization disorder (SD) and undifferentiated somatoform disorder. The study sample consisted of severely somatizing people who were included into the study after a multi-phase screening procedure in order to exclude psychiatric comorbidities and physical illnesses. Diagnosis of somatization disorder or undifferentiated sofatoform disorder were set according to Diagnostic and Statistical Manual of Mental Disorders 4th ed. (DSM-IV). The first study explored the regional cerebral metabolic rate of glucose (rCMRGlc) in severely somatizing females and found it to be reduced in several regions of the brain compared to healthy controls. The second study observed brain morphology with magnetic resonance imaging (MRI) based on the findings from the first study and showed enlarged caudate nuclei in somatizing women compared to healthy volunteers. The third study investigated temperament factors and brain metabolism, and their association with severe somatization. Low caudate and putamen metabolism, low novelty seeking as well as high harm avoidance were found to be associated with severe somatization in women, reduced caudate metabolism having the strongest association. The last study is a report of man with left-side gradient of multiple symptoms of unknown origin in the body. The examination revealed a hypermetabolic nucleus putamen on the contralateral side. All the main results reported in these four articles are original findings. The results suggest that CNS pathology is involved in the pathophysiology of severe somatization.

Design of an Event Based Messaging System

B2B document handling is moving from paper to electronic networks and electronic domain very rapidly. Moving, handling and transforming large electronic business documents requires a lot from the systems handling them. This paper explores new technologies such as SOA, event-driven systems and ESB and a scalable, event-driven enterprise service bus is created to demonstrate these new approaches to message handling. As an end result, we have a small but fully functional messaging system with several different components. This is the first larger Java-project done in-house, so on the side we developed our own set of best practices of Java development, setting up configurations, tools, code repositories and class naming and much more.

Imaging and Characterisation of Dirt Particles in Pulp and Paper

Dirt counting and dirt particle characterisation of pulp samples is an important part of quality control in pulp and paper production. The need for an automatic image analysis system to consider dirt particle characterisation in various pulp samples is also very critical. However, existent image analysis systems utilise a single threshold to segment the dirt particles in different pulp samples. This limits their precision. Based on evidence, designing an automatic image analysis system that could overcome this deficiency is very useful. In this study, the developed Niblack thresholding method is proposed. The method defines the threshold based on the number of segmented particles. In addition, the Kittler thresholding is utilised. Both of these thresholding methods can determine the dirt count of the different pulp samples accurately as compared to visual inspection and the Digital Optical Measuring and Analysis System (DOMAS). In addition, the minimum resolution needed for acquiring a scanner image is defined. By considering the variation in dirt particle features, the curl shows acceptable difference to discriminate the bark and the fibre bundles in different pulp samples. Three classifiers, called k-Nearest Neighbour, Linear Discriminant Analysis and Multi-layer Perceptron are utilised to categorize the dirt particles. Linear Discriminant Analysis and Multi-layer Perceptron are the most accurate in classifying the segmented dirt particles by the Kittler thresholding with morphological processing. The result shows that the dirt particles are successfully categorized for bark and for fibre bundles.

Neurobiology of pathological gambling. Brain imaging and epidemiological studies

Pathological gambling, a form of behavioral addiction, refers to maladaptive, compulsive gambling behavior severely interfering with an individual’s normal life. The prevalence of pathological gambling has been estimated to be 1–2% in western societies. The reward deficiency hypothesis of addiction assumes that individuals that have, or are prone, to addictions have blunted mesolimbic dopamine reward signaling, which leads to compulsive reward seeking in an attempt to compensate for the malfunctioning brain reward network. In this research project, the effects of gambling were measured using brain [11C] raclopride PET during slot machine gambling and possible brain structural changes associated with pathological gambling using MRI. The subjects included pathological gamblers and healthy volunteers. In addition, impulse control disorders associated with Parkinson’s disease were investigated by using brain [18F]fluorodopa PET and conducting an epidemiological survey. The results demonstrate mesolimbic dopamine release during gambling in both pathological gamblers and healthy volunteers. Striatal dopamine was released irrespective of the gambling outcome, whether the subjects won or not. There was no difference in gambling induced dopamine release between pathological gamblers and control subjects, although the magnitude of the dopamine release correlated with gambling related symptom severity in pathological gamblers. The results also show that pathological gambling is associated with extensive abnormality of brain white matter integrity, as measured with diffusion tensor imaging, similar to substance-addictions. In Parkinson’s disease patients with impulse control disorders, enhanced brain [18F] fluorodopa uptake in the medial orbitofrontal cortex was observed, indicating increased presynaptic monoamine function in this region, which is known to influence signaling in the mesolimbic system and reward processing. Finally, a large epidemiological survey in Finnish Parkinson’s disease patients showed that compulsive behaviors are very common in Parkinson disease and they are strongly associated with depression. These findings demonstrate the role of dopamine in pathological gambling, without support for the concept of reward deficiency syndrome.