Classification, comorbidity, heredity, and risk factors of female sexual dysfunctions

Female sexual dysfunctions, including desire, arousal, orgasm and pain problems, have been shown to be highly prevalent among women around the world. The etiology of these dysfunctions is unclear but associations with health, age, psychological problems, and relationship factors have been identified. Genetic effects explain individual variation in orgasm function to some extent but until now quantitative behavior genetic analyses have not been applied to other sexual functions. In addition, behavior genetics can be applied to exploring the cause of any observed comorbidity between the dysfunctions. Discovering more about the etiology of the dysfunctions may further improve the classification systems which are currently under intense debate. The aims of the present thesis were to evaluate the psychometric properties of a Finnish-language version of a commonly used questionnaire for measuring female sexual function, the Female Sexual Function Index (FSFI), in order to investigate prevalence, comorbidity, and classification, and to explore the balance of genetic and environmental factors in the etiology as well as the associations of a number of biopsychosocial factors with female sexual functions. Female sexual functions were studied through survey methods in a population based sample of Finnish twins and their female siblings. There were two waves of data collection. The first data collection targeted 5,000 female twins aged 33–43 years and the second 7,680 female twins aged 18–33 and their over 18–year-old female siblings (n = 3,983). There was no overlap between the data collections. The combined overall response rate for both data collections was 53% (n = 8,868), with a better response rate in the second (57%) compared to the first (45%). In order to measure female sexual function, the FSFI was used. It includes 19 items which measure female sexual function during the previous four weeks in six subdomains; desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain. In line with earlier research in clinical populations, a six factor solution of the Finnish-language version of the FSFI received supported. The internal consistencies of the scales were good to excellent. Some questions about how to avoid overestimating the prevalence of extreme dysfunctions due to women being allocated the score of zero if they had had no sexual activity during the preceding four weeks were raised. The prevalence of female sexual dysfunctions per se ranged from 11% for lubrication dysfunction to 55% for desire dysfunction. The prevalence rates for sexual dysfunction with concomitant sexual distress, in other words, sexual disorders were notably lower ranging from 7% for lubrication disorder to 23% for desire disorder. The comorbidity between the dysfunctions was substantial most notably between arousal and lubrication dysfunction even if these two dysfunctions showed distinct patterns of associations with the other dysfunctions. Genetic influences on individual variation in the six subdomains of FSFI were modest but significant ranging from 3–11% for additive genetic effects and 5–18% for nonadditive genetic effects. The rest of the variation in sexual functions was explained by nonshared environmental influences. A correlated factor model, including additive and nonadditive genetic effects and nonshared environmental effects had the best fit. All in all, every correlation between the genetic factors was significant except between lubrication and pain. All correlations between the nonshared environment factors were significant showing that there is a substantial overlap in genetic and nonshared environmental influences between the dysfunctions. In general, psychological problems, poor satisfaction with the relationship, sexual distress, and poor partner compatibility were associated with more sexual dysfunctions. Age was confounded with relationship length but had over and above relationship length a negative effect on desire and sexual satisfaction and a positive effect on orgasm and pain functions. Alcohol consumption in general was associated with better desire, arousal, lubrication, and orgasm function. Women pregnant with their first child had fewer pain problems than nulliparous nonpregnant women. Multiparous pregnant women had more orgasm problems compared to multiparous nonpregnant women. Having children was associated with less orgasm and pain problems. The conclusions were that desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain are separate entities that have distinct associations with a number of different biopsychosocial factors. However, there is also considerable comorbidity between the dysfunctions which are explained by overlap in additive genetic, nonadditive genetic and nonshared environmental influences. Sexual dysfunctions are highly prevalent and are not always associated with sexual distress and this relationship might be moderated by a good relationship and compatibility with partner. Regarding classification, the results supports separate diagnoses for subjective arousal and genital arousal as well as the inclusion of pain under sexual dysfunctions.

The analysis of bifurcations in the spatially distributed Langford system

In this thesis the bifurcational behavior of the solutions of Langford system is analysed. The equilibriums of the Langford system are found, and the stability of equilibriums is discussed. The conditions of loss of stability are found. The periodic solution of the system is approximated. We consider three types of boundary condition for Langford spatially distributed system: Neumann conditions, Dirichlet conditions and Neumann conditions with additional requirement of zero average. We apply the Lyapunov-Schmidt method to Langford spatially distributed system for asymptotic approximation of the periodic mode. We analyse the influence of the diffusion on the behavior of self-oscillations. As well in the present work we perform numerical experiments and compare it with the analytical results.

Työterveys- ja työturvallisuusjohtamisjärjestelmän (OHSAS 18001) kehittäminen

Yritykset kiinnittävät yhä enemmän huomiota toimintaansa ja sen tasoon. Viime vuosien aikana on keskitytty laatu- ja ympäristöasioiden lisäksi myös yrityksen työturvallisuuteen. Tähän ovat vaikuttaneet muun muassa kansainvälisten markkinoiden vaatimukset ja asiakkaiden kiinnostus. Tämä työ on osa Wärtsilä Finland Oy:n työterveys- ja työturvallisuusjärjestelmän kehittämisprojektia. Työn tavoitteena oli tunnistaa työterveys- ja työturvallisuusjohtamisjärjestelmään liittyvät vaatimukset OHSAS 18001 -spesifikaation mukaisesti. Tarkoituksena oli myös osittain kehittää työterveys- ja työturvallisuusjärjestelmää. Organisaation päämääränä on päästä Nolla tapaturmaa -ohjelman tavoitteeseen. Tämä tapahtuu eri keinoja käyttäen, kuten täyttämällä OHSAS 18001 -vaatimukset. OHSAS -vaatimuksista keskeiseen asemaan tässä työssä nousivat yrityksen riskien arviointi sekä tapaturmien tutkinta ja tilastointi. Riskien arviointi tehtiin pilottitehtaassa OHSAS 18001 -koulutukseen liittyvänä harjoituksena. Saatuja tuloksia voidaan pitää kohtalaisina kun huomioidaan, että kyseessä oli ensimmäinen riskien arviointikerta. Osa riskeistä jäi kuitenkin luultavasti havaitsematta, joten kehitystyötä on jatkettava. Tarkistusta ja kehittämistä vaativia asioita löytyi myös tapaturmien tutkimisen ja tilastoinnin saralta. Työn tuloksista voidaan todeta, että yrityksellä on käytössä joitakin OH&S -menettelyjä, mutta kehitettäviä osa-alueita on havaittavissa. Tulevaisuudessa olisi tärkeää, että yritys kehittäisi käyttöönotettua riskien arviointimenetelmää tai etsisi muita mahdollisia tapoja arvioida riskejä. Tätä kautta yrityksen on mahdollista päästä ennaltaehkäisevään työskentelynäkökulmaan ja edetä kohti Nolla tapaturmaa -ohjelman tavoitetta.

Nollapistekiinnittimen hyödyntäminen työkalun valmistuksessa ja muovausprosessissa

Tämä diplomityö tehtiin Lappeenrannan teknillisen yliopiston konetekniikan osastolle. Työn tavoitteena oli kartoittaa nollapistekiinnittimien tyyppejä ja toimintaperiaatteita sekä luoda muistilista liittyen nollapistekiinnittimen käyttöönottoon kiinnitysratkaisuna. Nollapistekiinnitin on konepajatekniikan kappaleenkiinnitin, joka tarjoaa tarkan paikoituksen, nopean asetusajan ja yksinkertaisen kappaleenvaihdon. Työssä tutkitaan nollapistekiinnittimien ominaisuuksia ja käyttökohteita, esitellään erityyppisiä nollapistekiinnittimiä ja vertaillaan niitä perinteisiin kiinnitysmenetelmiin. Työn kokeellisen osuuden tavoite oli tutkia nollapistekiinnittimen ominaisuuksia ja toimintaa ja pohtia mahdollisuuksia muovaustyökalun valmistuksessa ja kiinnittämisessä muovauspuristimeen. Kokeet tehtiin LTY:n konepajatekniikan laboratoriossa kesä- ja heinäkuussa 2010.

Riskivastuullisuus turvallisuuskasvatuksen kulttuurissa. Oppilaiden vastuullisuus, turvallisuustaju ja tuottamistoiminnan riskiraja peruskoulun käsityön opetuksessa

Riskit ja riskittömyys uhkaavat yksilöitä, käsityötä ja yhteiskuntaa. Käsityökasvatukselleon haaste toimia kulttuurissa, joka tavoittelee täyttä riskittömyyttä. Käsityössä kasvatetaan kekseliäisyyteen ja varautumaan sen aiheuttaman riskin kohtaamiseen sekä ottamaan siitä vastuuta. Tämän tutkimuksen tehtävänä on riskivastuullisuuden mallin rakentamiseksi selvittää, kuinka oppilaiden vastuullisuus selittää riskirajaa käsityön turvallisuuskasvatuksen kulttuurissa. Välinearvojen saavuttamiseksi on siedettävä välineriskiä, joka ei ylitä turvallisuuskulttuurin riskirajaa. Välinearvot ovat välineiden laatua lisääviä ominaisuuksia, joilla pyritään peittämään välineriskejä. Siedettävän riskin rajan ratkaisemiseen tarvitaan tietoa käsityön tuottamisesta ja todellisuutta havainnoivien tiedonalojen tietoa. Viime kädessä ratkaisu tehdään rakentavalla ajattelulla, johon kuuluu välinearvojen tavoittelua ohjaava käsityötaju ja välineriskeihin varautumista ohjaava turvallisuustaju. Käsityössä onnistuminen kannustaa kohti uusia haasteita ja epäonnistumisen riski asettuu mittasuhteisiinsa. Kekseliäässä käsityön kulttuurissa kokeillaan omia ja ympäröivän todellisuuden mahdollisuuksia ottamalla oivaltaen riskejä, jotka saavat aikaan rakentavan kokemuksen riskistä. Käsityö on riskioivallusten oppiaine. Tutkimustehtävän toteuttamiseksi tässä tutkimuksessa rakennetaan uusi riskivastuullisuuden malli, jossa vastuullisuus selittää riskirajaa. Mallin vastaavuutta selvitetään valtakunnallisesti peruskoulun käsityön 6. ja 9. luokan käsityön opetuksessa (n = 393). Aineisto on analysoitu rakenneyhtälöanalyysein konfirmatorisella faktorianalyysilla ja polkumallinnuksella. Tutkimusaineisto ja riskivastuullisuuden malli vastaavat toisiaan. Vastuullisuuden selitysosuus turvallisuustajun ja käsityötajun ratkaisemasta riskirajasta on mallin mukaan 35 %. Oppilaat osoittivat tuntevansa oman tuottamisensa vaikutuksia ja vastuuta niistä. Vastuullisuus osoittautui tärkeäksi riskirajan selittäjäksi, joten käsityön turvallisuuskasvatuksen kulttuuri voi kohota uudelle tasolle riskivastuulliseksi. Käsityön turvallisuuskasvatus on kokonaisvaltaista turvallisuustajun kasvatusta. Riskivastuullisuus luo turvallisuuskulttuuriin yhteisen käsityksen siedettävän riskin rajasta. Oppilaiden mahdollisuuksia kekseliääseen tutkivaan tuottamiseen on vahvistettava eikä rajoitettava. Riskivastuullisessa käsityön turvallisuuskasvatuksen kulttuurissa opettajan tehtävänä ei ole estää mitään tapahtumasta vaan saada mahdollisimman paljon tapahtumaan, sillä vastuullisuus kasvaa vastuuta ottamalla. Se on kasvatuksen – käsityökasvatuksen – keino turvallisuustyössä.

Rikottujen ikkunoiden nollatoleranssi. Tutkimus New Yorkin rikoksentorjunnan uuskonservatiivi-mallista Suomessa

Väitöskirja on kriminologista kontrollin ja rikoksentorjunnan tutkimusta sekä poliisitutkimusta. Kohteena on ympäri maailmaa levinnyt nollatoleranssiksi kutsuttu järjestyspoliisistrategia. Strategiaa kokeiltiin vuosituhannen vaihteessa vuoden kestäneessä järjestyksenvalvonnan hankkeessa Tampereella. Vaikka kyseessä oli kokeilu, niin tutkimuksessa osoitetaan toimintatavan olleen ja olevan pitkälti kiinteä osa perinteistä suomalaisen järjestyspoliisin toimintaperiaatetta. Artikkeliväitöskirja sisältää viisi vuosina 1998–2005 julkaistua kirjoitusta. Kokoavan yhteenvetoartikkelin tutkimusongelmat ovat seuraavat: Millaisia ovat Yhdysvaltojen ja Suomen järjestyspoliisitoiminnan nollatoleranssien mekanismien, kontekstien ja vaikutusten keskeiset erot ja yhtäläisyydet? Millainen on Tampereen nollatoleranssikokeilu ja New Yorkin rikottujen ikkunoiden nollatoleranssi rikoksentorjunnan arvioinnin ja moraalisäätelyn esimerkkeinä? Tampereen kokeilun prosessi- ja vaikuttavuusarviointitutkimus koostaa tutkimuksen empiirisen aineiston. Hankkeen alku- ja loppumittauksena toimi lomakekysely tamperelaisille (2 x n2000). Lisäksi analyysissä käytettiin kansalaiskyselyn uhrikyselyä, poliisin rikos- ja päivystyskeskustilastoja, Tilastokeskuksen tilastoja, hankkeen suoritelomakkeita sekä rangaistusvaatimus- ja rikesakkolomakkeita sekä kouluterveystutkimuksia. Tampereen poliiseille tehtiin lomakekysely ja teemahaastatteluja. Sosiaali-, nuoriso- ja vapaaehtoistyöntekijöitä sekä yli viisikymmentä tamperelaista nuorta sekä kymmenkunta tamperelaista aikuista haastateltiin. Yhdysvaltojen osalta nojaudutaan verrattain suureen määrään julkaistua korkeatasoista ja ajankohtaista kriminologista tutkimusta. New Yorkiin ja Yhdysvaltoihin sovelletussa hallintavalta- ja moraalisäätelyanalyysissa rikotut ikkunat -teoria osoittautuu uuskonservatiiviseksi moraaliprojektiksi, joka opastaa kaupunkeja hankkimaan itselleen oikeuden tiukkaan järjestyksenvalvontaan. Aiemmin sen oli estänyt kansalaisoikeusmyönteinen lakien tulkinta. New Yorkissa ja Tampereella syntyi useita kielteisiä sivu- ja vastavaikutuksia, kuten ongelmien siirtymistä (displacement). Tämä on yksi keskeinen tulos tilannetorjunnan ja kontrollin tehostamisen ja kohdistamisen hankkeissa. Tulokset haastavat arvioimaan kriittisesti, ovatko kaikki lapsiin ja nuoriin kohdistuvat varhaisen puuttumisen hankkeet seuraustensa perusteella oikeutettuja.

Cutting of Frozen Wood

The objective of this master's thesis was to develop a system for measuring the cutting forces of frozen wood. In northern parts of the world cuttingof frozen wood is one of the major problem. During winter and early spring the temperature inside the wood cells will fall below Zero degrees that strongly influences on the properties of the wood. These variations of properties will effects on the blade nomenclature while cutting the frozen wood. However the end results will cause uneven cutting forces. Cutting forces, Chip formation, wearing of the blade and the quality of the machined surface are difficult task. In this project we are attempting to find the variation of cutting forces and properties of frozen wood at four different temperatures (-20 , -10, 0 and + 10 degrees). The linear planning machine was used for measuring the cuttingforces. The cutting was done parallel to the long axis of wood due to the nature of pine wood and the structure of the plane. A considerable amount of work andtime was used for collecting and processing the numerical information from the sensors of the measuring system. There were some alterations suggested to the construction of the plane and the sensor system.

Practical applications of a systematic approach to the chemical abatement of pollutants in water and air

The present dissertation is devoted to the systematic approach to the development of organic toxic and refractory pollutants abatement by chemical decomposition methods in aqueous and gaseous phases. The systematic approach outlines the basic scenario of chemical decomposition process applications with a step-by-step approximation to the most effective result with a predictable outcome for the full-scale application, confirmed by successful experience. The strategy includes the following steps: chemistry studies, reaction kinetic studies in interaction with the mass transfer processes under conditions of different control parameters, contact equipment design and studies, mathematical description of the process for its modelling and simulation, processes integration into treatment technology and its optimisation, and the treatment plant design. The main idea of the systematic approach for oxidation process introduction consists of a search for the most effective combination between the chemical reaction and the treatment device, in which the reaction is supposed to take place. Under this strategy,a knowledge of the reaction pathways, its products, stoichiometry and kinetics is fundamental and, unfortunately, often unavailable from the preliminary knowledge. Therefore, research made in chemistry on novel treatment methods, comprisesnowadays a substantial part of the efforts. Chemical decomposition methods in the aqueous phase include oxidation by ozonation, ozone-associated methods (O3/H2O2, O3/UV, O3/TiO2), Fenton reagent (H2O2/Fe2+/3+) and photocatalytic oxidation (PCO). In the gaseous phase, PCO and catalytic hydrolysis over zero valent ironsare developed. The experimental studies within the described methodology involve aqueous phase oxidation of natural organic matter (NOM) of potable water, phenolic and aromatic amino compounds, ethylene glycol and its derivatives as de-icing agents, and oxygenated motor fuel additives ¿ methyl tert-butyl ether (MTBE) ¿ in leachates and polluted groundwater. Gas-phase chemical decomposition includes PCO of volatile organic compounds and dechlorination of chlorinated methane derivatives. The results of the research summarised here are presented in fifteenattachments (publications and papers submitted for publication and under preparation).

Converter-flux-based current control of voltage source PWM rectifiers - analysis and implementation

Pulsewidth-modulated (PWM) rectifier technology is increasingly used in industrial applications like variable-speed motor drives, since it offers several desired features such as sinusoidal input currents, controllable power factor, bidirectional power flow and high quality DC output voltage. To achieve these features,however, an effective control system with fast and accurate current and DC voltage responses is required. From various control strategies proposed to meet these control objectives, in most cases the commonly known principle of the synchronous-frame current vector control along with some space-vector PWM scheme have been applied. Recently, however, new control approaches analogous to the well-established direct torque control (DTC) method for electrical machines have also emerged to implement a high-performance PWM rectifier. In this thesis the concepts of classical synchronous-frame current control and DTC-based PWM rectifier control are combined and a new converter-flux-based current control (CFCC) scheme is introduced. To achieve sufficient dynamic performance and to ensure a stable operation, the proposed control system is thoroughly analysed and simple rules for the controller design are suggested. Special attention is paid to the estimationof the converter flux, which is the key element of converter-flux-based control. Discrete-time implementation is also discussed. Line-voltage-sensorless reactive reactive power control methods for the L- and LCL-type line filters are presented. For the L-filter an open-loop control law for the d-axis current referenceis proposed. In the case of the LCL-filter the combined open-loop control and feedback control is proposed. The influence of the erroneous filter parameter estimates on the accuracy of the developed control schemes is also discussed. A newzero vector selection rule for suppressing the zero-sequence current in parallel-connected PWM rectifiers is proposed. With this method a truly standalone and independent control of the converter units is allowed and traditional transformer isolation and synchronised-control-based solutions are avoided. The implementation requires only one additional current sensor. The proposed schemes are evaluated by the simulations and laboratory experiments. A satisfactory performance and good agreement between the theory and practice are demonstrated.

The Control of the Edge Shrinkage in Board

Tämän diplomityön tavoitteena oli löytää prosessiparametrejä nestepakkauskartongin reuna-alueiden kuivatuskutistuman hallintaan ja saada tuotteen reuna-alueiden sileystaso paremmaksi. Tarkoituksena oli parantaa reuna-alueiden painettavuusominaisuuksia sekä saada koneen poikkisuunnassa laadultaan parempi tuote. Työn kirjallisuusosassa on tarkasteltu työn kannalta nestepakkauskartongin kriittisimpiä ominaisuuksia, sileyttä ja jäykkyyttä. Lisäksi kirjallisuusosassa on tarkasteltu kuitujen ominaisuuksia, sylinterikuivatusta ja kuivatuskutistumaa. Kokeellisessa osassa on etsitty esitutkimuksella prosessiparametrejä, jotka ovat aiheuttaneet poikkisuunnan sileyserojen kasvun kartonkikoneen investoinnin jälkeen. Suoria korrelaatioita prosessiparametrien ja kuivatuskutistuman välille ei löydetty. Kokeellisen osan tehdasmittakaavaisissa koeajoissa tutkittiin kahdeksan eri parametrin vaikutusta kuivatuskutistumaan, jotka perustuivat kirjallisuuteen. Tutkituista parametreistä huulisuihkun iskukulman muutoksella sekä konesuuntaisella kuivatusprofiililla ei ollut vaikutusta kuivatuskutistumaan. Runkokerroksen mäntysellun korvaaminen koivusellulla vähensi kuivatuskutistumaa ja lisäsi sileyttä, mutta tuotteen palstautumislujuus ei tällöin ollut riittävä. Retentiokemikaalien reseptimuutoksilla pinta- ja taustakerroksen välillä, kuivatusosan nollatason laskulla ja perälaatikkosakeuksien pienentämisellä oli vähän vaikutusta kuivatuskutistumaan. Vaikutus reuna-alueiden sileyteen oli kuitenkin vähemmän kuin 10 %. Diplomityön perusteella kuivatusosan nopeuseroilla ja kuivatusviirojen kireyksillä oli suurin vaikutusta kuivatuskutistumaan ja reuna-alueiden sileystasoon. Lisäämällä nopeuseroja ja kiristämällä kuivatusviiroja reuna-alueiden sileyttä pystyttiin parantamaan yli 20 %.

On Short Exponential Sums Involving Fourier Coefficients of Holomorphic Cusp Forms

By an exponential sum of the Fourier coefficients of a holomorphic cusp form we mean the sum which is formed by first taking the Fourier series of the said form,then cutting the beginning and the tail away and considering the remaining sum on the real axis. For simplicity’s sake, typically the coefficients are normalized. However, this isn’t so important as the normalization can be done and removed simply by using partial summation. We improve the approximate functional equation for the exponential sums of the Fourier coefficients of the holomorphic cusp forms by giving an explicit upper bound for the error term appearing in the equation. The approximate functional equation is originally due to Jutila [9] and a crucial tool for transforming sums into shorter sums. This transformation changes the point of the real axis on which the sum is to be considered. We also improve known upper bounds for the size estimates of the exponential sums. For very short sums we do not obtain any better estimates than the very easy estimate obtained by multiplying the upper bound estimate for a Fourier coefficient (they are bounded by the divisor function as Deligne [2] showed) by the number of coefficients. This estimate is extremely rough as no possible cancellation is taken into account. However, with small sums, it is unclear whether there happens any remarkable amounts of cancellation.

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

Impact of unsymmetrical loads in distribution networks

Since it is virtually impossible to balance loads in three-phase system, unbalance in a varying degree exists almost in all distribution networks. The aim of the thesis is to analyze the impact of this unbalance subject to different configurations of distribution system and winding connection of the supplying transformer. Also impact of the voltage unbalance on the equipment is investigated. In order to make the investigation more visual, the following calculations have been conducted: - Unsymmetrical load in four-wire star connected network - Unsymmetrical load in four-wire star connected network with broken zero conductor (or three-wire network). - Unsymmetrical load when the supplying transformer is so-called zigzag transformer. PDF created

On the Application of Beam on Elastic Foundation Theory to the Analysis of Stiffened Plate Strips

The main objective of this thesis is to show that plate strips subjected to transverse line loads can be analysed by using the beam on elastic foundation (BEF) approach. It is shown that the elastic behaviour of both the centre line section of a semi infinite plate supported along two edges, and the free edge of a cantilever plate strip can be accurately predicted by calculations based on the two parameter BEF theory. The transverse bending stiffness of the plate strip forms the foundation. The foundation modulus is shown, mathematically and physically, to be the zero order term of the fourth order differential equation governing the behaviour of BEF, whereas the torsion rigidity of the plate acts like pre tension in the second order term. Direct equivalence is obtained for harmonic line loading by comparing the differential equations of Levy's method (a simply supported plate) with the BEF method. By equating the second and zero order terms of the semi infinite BEF model for each harmonic component, two parameters are obtained for a simply supported plate of width B: the characteristic length, 1/ λ, and the normalized sum, n, being the effect of axial loading and stiffening resulting from the torsion stiffness, nlin. This procedure gives the following result for the first mode when a uniaxial stress field was assumed (ν = 0): 1/λ = √2B/π and nlin = 1. For constant line loading, which is the superimposition of harmonic components, slightly differing foundation parameters are obtained when the maximum deflection and bending moment values of the theoretical plate, with v = 0, and BEF analysis solutions are equated: 1 /λ= 1.47B/π and nlin. = 0.59 for a simply supported plate; and 1/λ = 0.99B/π and nlin = 0.25 for a fixed plate. The BEF parameters of the plate strip with a free edge are determined based solely on finite element analysis (FEA) results: 1/λ = 1.29B/π and nlin. = 0.65, where B is the double width of the cantilever plate strip. The stress biaxial, v > 0, is shown not to affect the values of the BEF parameters significantly the result of the geometric nonlinearity caused by in plane, axial and biaxial loading is studied theoretically by comparing the differential equations of Levy's method with the BEF approach. The BEF model is generalised to take into account the elastic rotation stiffness of the longitudinal edges. Finally, formulae are presented that take into account the effect of Poisson's ratio, and geometric non linearity, on bending behaviour resulting from axial and transverse inplane loading. It is also shown that the BEF parameters of the semi infinite model are valid for linear elastic analysis of a plate strip of finite length. The BEF model was verified by applying it to the analysis of bending stresses caused by misalignments in a laboratory test panel. In summary, it can be concluded that the advantages of the BEF theory are that it is a simple tool, and that it is accurate enough for specific stress analysis of semi infinite and finite plate bending problems.

Magnetic and transport properties of II-V diluted magnetic semiconductors doped with manganese and nickel

This thesis is devoted to investigations of three typical representatives of the II-V diluted magnetic semiconductors, Zn1-xMnxAs2, (Zn1-xMnx)3As2 and p-CdSb:Ni. When this work started the family of the II-V semiconductors was presented by only the compounds belonging to the subgroup II3-V2, as (Zn1-xMnx)3As2, whereas the rest of the materials mentioned above were not investigated at all. Pronounced low-field magnetic irreversibility, accompanied with a ferromagnetic transition, are observed in Zn1-xMnxAs2 and (Zn1-xMnx)3As2 near 300 K. These features give evidence for presence of MnAs nanosize magnetic clusters, responsible for frustrated ground magnetic state. In addition, (Zn1-xMnx)3As2 demonstrates large paramagnetic response due to considerable amount of single Mn ions and small antiferromagnetic clusters. Similar paramagnetic system existing in Zn1-xMnxAs2 is much weaker. Distinct low-field magnetic irreversibility, accompanied with a rapid saturation of the magnetization with increasing magnetic field, is observed near the room temperature in p- CdSb:Ni, as well. Such behavior is connected to the frustrated magnetic state, determined by Ni-rich magnetic Ni1-xSbx nanoclusters. Their large non-sphericity and preferable orientations are responsible for strong anisotropy of the coercivity and saturation magnetization of p- CdSb:Ni. Parameters of the Ni1-xSbx nanoclusters are estimated. Low-temperature resistivity of p-CdSb:Ni is governed by a hopping mechanism of charge transfer. The variable-range hopping conductivity, observed in zero magnetic field, demonstrates a tendency of transformation into the nearest-neighbor hopping conductivity in non-zero magnetic filed. The Hall effect in p-CdSb:Ni exhibits presence of a positive normal and a negative anomalous contributions to the Hall resistivity. The normal Hall coefficient is governed mainly by holes activated into the valence band, whereas the anomalous Hall effect, attributable to the Ni1-xSbx nanoclusters with ferromagnetically ordered internal spins, exhibits a low-temperature power-law resistivity scaling.