Characterisation of pigment particles by scanning electron microscope and image analysis programs

Coating and filler pigments have strong influence to the properties of the paper. Filler content can be even over 30 % and pigment content in coating is about 85-95 weight percent. The physical and chemical properties of the pigments are different and the knowledge of these properties is important for optimising of optical and printing properties of the paper. The size and shape of pigment particles can be measured by different analysers which can be based on sedimentation, laser diffraction, changes in electric field etc. In this master's thesis was researched particle properties especially by scanning electron microscope (SEM) and image analysis programs. Research included nine pigments with different particle size and shape. Pigments were analysed by two image analysis programs (INCA Feature and Poikki), Coulter LS230 (laser diffraction) and SediGraph 5100 (sedimentation). The results were compared to perceive the effect of particle shape to the performance of the analysers. Only image analysis programs gave parameters of the particle shape. One part of research was also the sample preparation for SEM. Individual particles should be separated and distinct in ideal sample. Analysing methods gave different results but results from image analysis programs corresponded even to sedimentation or to laser diffraction depending on the particle shape. Detailed analysis of the particle shape required high magnification in SEM, but measured parameters described very well the shape of the particles. Large particles (ecd~1 µm) could be used also in 3D-modelling which enabled the measurement of the thickness of the particles. Scanning electron microscope and image analysis programs were effective and multifunctional tools for particle analyses. Development and experience will devise the usability of analysing method in routine use.

Theoretical Analysis and Numerical Simulation of Spectral Radiative Properties of Combustion Gases in Oxy/Air-Fired Combustion Systems

Energy efficiency is one of the major objectives which should be achieved in order to implement the limited energy resources of the world in a sustainable way. Since radiative heat transfer is the dominant heat transfer mechanism in most of fossil fuel combustion systems, more accurate insight and models may cause improvement in the energy efficiency of the new designed combustion systems. The radiative properties of combustion gases are highly wavelength dependent. Better models for calculating the radiative properties of combustion gases are highly required in the modeling of large scale industrial combustion systems. With detailed knowledge of spectral radiative properties of gases, the modeling of combustion processes in the different applications can be more accurate. In order to propose a new method for effective non gray modeling of radiative heat transfer in combustion systems, different models for the spectral properties of gases including SNBM, EWBM, and WSGGM have been studied in this research. Using this detailed analysis of different approaches, the thesis presents new methods for gray and non gray radiative heat transfer modeling in homogeneous and inhomogeneous H2O–CO2 mixtures at atmospheric pressure. The proposed method is able to support the modeling of a wide range of combustion systems including the oxy-fired combustion scenario. The new methods are based on implementing some pre-obtained correlations for the total emissivity and band absorption coefficient of H2O–CO2 mixtures in different temperatures, gas compositions, and optical path lengths. They can be easily used within any commercial CFD software for radiative heat transfer modeling resulting in more accurate, simple, and fast calculations. The new methods were successfully used in CFD modeling by applying them to industrial scale backpass channel under oxy-fired conditions. The developed approaches are more accurate compared with other methods; moreover, they can provide complete explanation and detailed analysis of the radiation heat transfer in different systems under different combustion conditions. The methods were verified by applying them to some benchmarks, and they showed a good level of accuracy and computational speed compared to other methods. Furthermore, the implementation of the suggested banded approach in CFD software is very easy and straightforward.

Political ideologies and attitudes towards income inequality in the US: a critical discourse analysis of CNN and Fox News opinion articles

The topic of the thesis is media discourse about current state if income inequality in the US, and political ideologies as influences behind the discourse. The data consists of four opinion articles, two from CNN and two from Fox News. The purpose of the study was to examine how media represents income inequality as an issue, and if the attitudes conveyed are concerned or indifferent. Previous studies have indicated that the level of income is often seen as a personal responsibility, and such perspective can be linked with Republican ideology. In contrast, the Democrats typically express more concern about the consequences of inequality. CNN has been previously considered to have a Democratic bias, and Fox News has been considered to have Republican bias, which is one reason why these two news channels were chosen as the sources of the data. The study is a critical discourse analysis, and the methods applied were sociocognitive approach, which analyzes the social and cognitive factors affecting the discourse, and appraisal framework, which was applied to scrutinize the expressed attitudes more closely by identifyind specific linguistic features. The appraisal framework includes studying such features as affect, judgment and appreciation, which offer a more detailed analysis on the attitudes present in the articles. The sociocognitive approach, additionally, offers a way of analyzing a more broad context affecting the articles. The findings were then compared, to see if there are differences between the articles, or between the news sites with alleged bias. The findings showed that CNN, with alleged Democratic bias, had a more symphatetic attitude towards income inequality, whereas Fox News, with more Republican views, showed clearly less concern towards the issue. Moreover, the Fox News articles had such dubious claims that the underlying ideology behind the articles could be even supporting of income inequality, as it allows the rich to pursue all the wealth they can without having to give anything away. The results, thus, suggest that the political ideologies may a significant effect on media discourse, which, in turn, may have a significant effect on the attitudes of the public towards great issues that could require prompt measures.

TV taskussa - tänään ja tulevaisuudessa

The objective of my thesis was to find out how mobile TV service will influence TV consumption behaviour of the Finns. In particular the study focuses on the consumption behaviour of a well educated urban people. For my thesis, I provided a detailed analysis of the study results of a large scale questionnaire research FinPilot from the year 2005 based on an assignment of Nokia Ltd. In order to deepen the study results, I focused on the above mentioned group of young people with good education. The goal of the FinPilot research was to give answers to the following questions: what kind of programs, in what kind of circumstances, and for which reasons are they watched when using the mobile television service. The results of the research consisted mainly of data like figures, graphics etc. The data was explaned from the helicopter perspective, for it gave additional value to the research and consequently to my own thesis. My study offered complementary, unique information about their needs as it was based on questionnaires supplemented by individual interviews of the group members, their free comments as well as group discussions. The study results proved that mobile TV service did not increase the total TV consumption time. The time used for watching the mobile TV was significantly shorter than the time for watching the traditional TV. According to my study, the young urban people with good education are more interested to adapt the mobile TV service than the average Finns. Being eager to utilize the added value offered by the mobile TVs they are a potential target group in launching and marketing processes. On the basis of the outcome of the thesis, the future of mobile TV service seems very promising. The content and the pricing, however, have to match the user's needs and expectations. All the study results prove that there exists a social order for mobile TV service.

A Model for Product Transfer Project

In this thesis a model for managing the product data in a product transfer project was created for ABB Machines. This model was then applied for the ongoing product transfer project during its planning phase. Detailed information about the demands and challenges in product transfer projects was acquired by analyzing previous product transfer projects in participating organizations. This analysis and the ABB Gate Model were then used as a base for the creation of the model for managing the product data in a product transfer project. The created model shows the main tasks during each phase in the project, their sub-tasks and relatedness on general level. Furthermore the model emphasizes need for detailed analysis of the situation during the project planning phase. The created model for managing the product data in a product transfer project was applied into ongoing project two main areas; manufacturing instructions and production item data. The results showed that the greatest challenge considering the product transfer project in previously mentioned areas is the current state of the product data. Based on the findings, process and resource proposals for both the ongoing product transfer project and the BU Machines were given. For manufacturing instructions it is necessary to create detailed process instructions in receiving organizations own language for each department so that the manufacturing instructions can be used as a training material during the training in sending organization. For production item data the English version of the bill of materials needs to be fully in English. In addition it needs to be ensured that bill of materials is updated and these changes implemented before the training in sending organization begins.

Structural studies on enzymes of biotechnological and biomedical interest

Structural studies of proteins aim at elucidating the atomic details of molecular interactions in biological processes of living organisms. These studies are particularly important in understanding structure, function and evolution of proteins and in defining their roles in complex biological settings. Furthermore, structural studies can be used for the development of novel properties in biomolecules of environmental, industrial and medical importance. X-ray crystallography is an invaluable tool to obtain accurate and precise information about the structure of proteins at the atomic level. Glutathione transferases (GSTs) are amongst the most versatile enzymes in nature. They are able to catalyze a wide variety of conjugation reactions between glutathione (GSH) and non-polar components containing an electrophilic carbon, nitrogen or sulphur atom. Plant GSTs from the Tau class (a poorly characterized class) play an important role in the detoxification of xenobiotics and stress tolerance. Structural studies were performed on a Tau class fluorodifen-inducible glutathione transferase from Glycine max (GmGSTU4-4) complexed with GSH (2.7 Å) and a product analogue Nb-GSH (1.7 Å). The three-dimensional structure of the GmGSTU4-4-GSH complex revealed that GSH binds in different conformations in the two subunits of the dimer: in an ionized form in one subunit and a non-ionized form in the second subunit. Only the ionized form of the substrate may lead to the formation of a catalytically competent complex. Structural comparison between the GSH and Nb-GSH bound complexes revealed significant differences with respect to the hydrogen-bonding, electrostatic interaction pattern, the upper part of -helix H4 and the C-terminus of the enzyme. These differences indicate an intrasubunit modulation between the G-and Hsites suggesting an induced-fit mechanism of xenobiotic substrate binding. A novel binding site on the surface of the enzyme was also revealed. Bacterial type-II L-asparaginases are used in the treatment of haematopoietic diseases such as acute lymphoblastic leukaemia (ALL) and lymphomas due to their ability to catalyze the conversion of L-asparagine to L-aspartate and ammonia. Escherichia coli and Erwinia chrysanthemi asparaginases are employed for the treatment of ALL for over 30 years. However, serious side-effects affecting the liver and pancreas have been observed due to the intrinsic glutaminase activity of the administered enzymes. Structural studies on Helicobacter pylori L-asparaginase (HpA) were carried out in an effort to discover novel L-asparaginases with potential chemotherapeutic utility in ALL treatment. Detailed analysis of the active site geometry revealed structurally significant differences between HpA and other Lasparaginases that may be important for the biological activities of the enzyme and could be further exploited in protein engineering efforts.

JNK, a versatile regulator of kinesin-1 transport and cytoskeleton dynamics

C-Jun N-terminal kinase (JNK) is traditionally recognized as a crucial factor in stress response and inducer of apoptosis upon various stimulations. Three isoforms build the JNK subfamily of MAPK; generally expressed JNK1 and JNK2 and brain specific JNK3. Degenerative potency placed JNK in the spotlight as potential pharmacological option for intervention. Unfortunately, adverse effects of potential drugs and observation that expression of only JNK2 and JNK3 are induced upon stress, restrained initial enthusiasm. Notably, JNK1 demonstrated atypical high constitutive activity in neurons that is not responsive to cellular stresses and indicated existence of physiological activity. This thesis aimed at revealing the physiological functions of JNK1 in actin homeostasis through novel effector MARCKS-Like 1 (MARCKSL1) protein, neuronal trafficking mediated by major kinesin-1 motor protein and microtubule (MT) dynamics via STMN2/SCG10. The screen for novel physiological JNK substrates revealed specific phosphorylation of C-terminal end of MARCKSL1 at S120, T148 and T183 both ex vivo and in vitro. By utilizing site-specific mutagenesis, various actin dynamics and migrations assays we were able to demonstrate that JNK1 phosphorylation specifically facilitates F-actin bundling and thus filament stabilisation. Consecutively, this molecular mechanism was proved to enhance formation of filopodia; cell surface projections that allow cell sensing surrounding environment and migrate efficiently. Our results visualize JNK dependent and MARCKSL1 executed induction of filopodia in neurons and fibroblast indicating general mechanism. Subsequently, inactivation of JNK action on MARCKSL1 shifts cellular actin machinery into lamellipodial dynamic arrangement. Tuning of actin cytoskeleton inevitably melds with cell migration. We observed that both active JNK and JNK pseudo-phosphorylated form of MARCKSL1 reduce actin turnover in intact cells leading to overall diminished cell motility. We demonstrate that tumour transformed cells from breast, prostate, lung and muscle-derived cancers upregulate MARCKSL1. We showed on the example of prostate cancer PC-3 cell line that JNK phosphorylation negatively controls MARCKSL1 ability to induce migration, which precedes cancer cell metastasis. The second round of identification of JNK physiological substrates resulted in detection of predominant motor protein kinesin-1 (Kif5). Mass spectrometry detailed analysis showed evident endogenous phosphorylation of kinesin-1 on S176 within motor domain that interacts with MT. In vitro phosphorylation of bacterially expressed kinesin heavy chain by JNK isoforms displayed higher specificity of JNK1 when compared to JNK3. Since, JNK1 is constitutively active in neurons it signified physiological aspect of kinesin-1 regulation. Subsequent biochemical examination revealed that kinesin-1, when not phosphorylated on JNK site, exhibits much higher affinity toward MTs. Expression of the JNK non-phosphorable kinesin-1 mutant in intact cells as well as in vitro single molecule imaging using total internal reflection fluorescence microscopy indicated that the mutant loses normal speed and is not able to move processively into proper cellular compartments. We identify novel kinesin-1 cargo protein STMN2/SCG10, which along with known kinesin-1 cargo BDNF is showing impaired trafficking when JNK activity is inhibited. Our data postulates that constitutive JNK activity in neurons is crucial for unperturbed physiologically relevant transport of kinesin-1 dependant cargo. Additionally, my work helps to validate another novel physiological JNK1 effector STMN2/SCG10 as determinant of axodendritic neurites dynamics in the developing brain through regulation of MT turnover. We show successively that this increased MT dynamics is crucial during developmental radial migration when brain layering occurs. Successively, we are able to show that introduction of JNK phosphorylation mimicking STMN2/SCG10 S62/73D mutant rescues completely JNK1 genetic deletion migration phenotype. We prove that STMN2/SCG10 is predominant JNK effector responsible for MT depolymerising activity and neurite length during brain development. Summarizing, this work describes identification of three novel JNK substrates MARCKSL1, kinesin-1 and STMN2/SCG10 and investigation of their roles in cytoskeleton dynamics and cargo transport. This data is of high importance to understand physiological meaning of JNK activity, which might have an adverse effect during pharmaceutical intervention aiming at blocking pathological JNK action.

Treatment of Fe-containing Acid Mine Waters in Fixed Bed Adsorption Column with Calcite Side-Stone

The acid mining drainage is considered the most significant environmental pollution problem around the world for the extensive formation acidic leachates containing heavy metals. Adsorption is widely used methods in water treatment due to it easy operation and the availability of a wide variety of commercial adsorbent (low cost). The primary goal of this thesis was to investigate the efficiency of neutralizing agents, CaCO3 and CaSiO3, and metal adsorption materials with unmodified limestone from Company Nordkalk Oy. In addition to this, the side materials of limestone mining were tested for iron adsorption from acidic model solution. This study was executed at Lappeenranta University of Technology, Finland. The work utilised fixed-bed adsorption column as the main equipment and large fluidized column. Atomic absorption spectroscopy (AAS) and x-ray diffraction (XRD) was used to determine ferric removal and the composition of material respectively. The results suggest a high potential for the studied materials to be used a low cost adsorbents in acid mine drainage treatment. From the two studied adsorbents, the FS material was more suitable than the Gotland material. Based on the findings, it is recommended that further studies might include detailed analysis of Gotland materials.

Pääomasijoittamisen tehostaminen suomalaisen pkt-sektorin kehittämisessä

Tutkimuksen tavoitteena oli kehittää systemaattinen toimintamalli sekä luoda suorituskyvyn esi-merkkimittaristo pääomasijoittajan toiminnan tehostamiseksi. Pääomasijoittajan tärkein tehtävä on pyrkiä kasvattamaan sijoituskohdeyrityksen osakkeiden ja siten omistaja-arvoa keskipitkällä aika-jänteellä. Strategioiden kehittämistä ja toteuttamista on tutkittu sangen laajasti, mutta käytännölli-sempi lähestymiskulma hallitustyöskentelyn vaikutuksista sekä strategioiden toteutuksen varmis-tamisesta on jäänyt näissä aikaisemmissa tutkimuksissa vähemmälle huomiolle. Varsinainen perusta omistaja-arvolle ja sen kasvattamiselle suomalaisen pkt-yrityksen pääomasi-joittamisessa luodaan hyvien ja tulevaisuuden kasvupotentiaalia omaavien kohdeyritysten etsimisellä, riittävän tarkalla analysoinnilla sekä sijoitushetken kohtuullisella arvostuksella. Sijoitusaikana ei enää pystytä korjaamaan mahdollisia alkuvaiheen epäonnistumisia. Kun kohdeyhtiöön on valittu ammattitaitoinen ja motivoitunut hallitus, tulee pääomasijoittajan panostaa valittujen strategioiden toteuttamiseen havainnollisilla ja tehokkailla työkaluilla. Ne mahdollistavat kohdeyrityksen visioiden ja arvojen jakamisen edelleen helpommin ymmärrettäviksi avainmittareiksi ja –tavoitteiksi kaikille organisaatiotasoille. Suorituskyvyn mittaamisen ja analysoinnin päätehtävä sekä suurissa että pienissäkin yrityksissä on yritysjohdon päätöksenteon tukeminen luotettavan, säännöllisen ja riittävän tarkan informaation tuottamisella huolellisesti valituista mittauskohteista. Suorituskyvyn analysointi auttaa myös hahmottamaan paremmin kokonaisnäkemystä yrityksen menestykseen vaikuttavista tekijöistä sekä niiden välisistä syy-yhteyksistä. Alunperin suuryritysten tarpeisiin kehitetyt suorituskyvyn analysointi- ja mittausmenetelmät ovat poikkeuksetta liian monimutkaisia ja raskaita vastatakseen pienempien yritysten vaatimuksia. Liiketoiminnan seuraamisessa ja ohjaamisessa pkt-yrityksen hallituksen tulee ottaa perinteisten taloudellisten mittareiden lisäksi mukaan myös keskeisimpiä, ei-taloudellisia seurattavia asioita, joiden avulla muodostuu ajantasaisempi kuva kohdeyhtiön kilpailukyvystä sekä menestyksestä. Pääomasijoittajan toimintamallissa esitellään kansainvälisesti käytössä olevia menetelmiä strategian jalkauttamiseen, yrityksen liiketoimintamallin kehittämiseen sekä suorituskyvyn johtamisen tukemiseen. Pkt-yrityksille pyrittiin luomaan yksinkertainen mallimittaristo suorituskyvyn analysointiin ja yrityksen johtamisen tueksi. Sijoituskohdeyritysten hallituksilla on jo tällä hetkellä käytettävissään erilaisia kuukausittaisia taloudellisia tunnuslukuja sekä tilikauden tuloksestakin jotain ennakkotietoa. Näiden pohjalle olisi varsin yksinkertaista rakentaa myös yrityksen sisäisiä prosesseja, asiakkuustyöskentelyä, myyntiä ja markkinointia sekä toiminnan yleistä systemaattisuutta kuvaavia mittareita.

Entrepreneurship Education in Basic and Upper Secondary Education – Measurement and Empirical Evidence

The starting point of this study is to direct more attention to the teacher and those entrepreneurship education practices taking place in formal school to find out solutions for more effective promotion of entrepreneurship education. For this objective, the strategy-level aims of entrepreneurship education need to be operationalised into measurable and understandable teacher-level practices. Furthermore, to enable the effective development of entrepreneurship education in basic and upper secondary level education, more knowledge is needed of the state of affairs of entrepreneurship education in teaching. The purpose of the study is to increase the level of understanding of teachers’ entrepreneurship education practices, and through this to develop entrepreneurship education. This study builds on the literature on entrepreneurship education and especially those elements referring to the aims, resources, benefits, methods, and practises of entrepreneurship education. The study comprises five articles highlighting teachers’ role in entrepreneurship education. In the first article the concept of entrepreneurship and the teachers role in reflection upon his/hers approaches to entrepreneurship education are considered. The second article provides a detailed analysis of the process of developing a measurement tool to depict the teachers’ activities in entrepreneurship education. The next three articles highlight the teachers’ role in directing the entrepreneurship education in basic and upper secondary level education. Furthermore, they analyse the relationship between the entrepreneurship education practises and the teachers’ background characteristics. The results of the study suggest a wide range of conclusions and implications. First, in spite of many outspoken aims connected to entrepreneurship education, teachers have not set any aims for themselves. Additionally, aims and results seem to mix. However, it is possible to develop teachers’ target orientation by supporting their reflection skills, and through measurement and evaluation increase their understanding of their own practices. Second, applying a participatory action process it is possible to operationalise teachers’entrepreneurship education practices. It is central to include the practitioners’ perspective in the development of measures to make sure that the concepts and aims of entrepreneurship education are understood. Third, teachers’ demographic or tenure-related background characteristics do not affect their entrepreneurship education practices, but their training related to entrepreneurship education, participation in different school-level or regional planning, and their own capabilities support entrepreneurship education. Fourth, a large number of methods are applied to entrepreneurship education, and the most often used methods were different kinds of discussions, which seem to be an easy, low-threshold way for teachers to include entrepreneurship education regularly in their teaching. Field trips to business enterprises or inviting entrepreneurs to present their work in schools are used fairly seldom. Interestingly, visits outside the school are more common than visitors invited to the school. In line, most of the entrepreneurship education practices take place in a classroom. Therefore it seems to be useful to create and encourage teachers towards more in-depth cooperation with companies (e.g. via joint projects) and to network systematically. Finally, there are plenty of resources available for entrepreneurship education, such as ready-made materials, external stakeholders, support organisations, and learning games, but teachers have utilized them only marginally.

Pp2a: At The Crossroads Between Growth and Defence In Plants

Living organisms manage their resources in well evolutionary-preserved manner to grow and reproduce. Plants are no exceptions, beginning from their seed stage they have to perceive environmental conditions to avoid germination at wrong time or rough soil. Under favourable conditions, plants invest photosynthetic end products in cell and organ growth to provide best possible conditions for generation of offspring. Under natural conditions, however, plants are exposed to a multitude of environmental stress factors, including high light and insufficient light, drought and flooding, various bacteria and viruses, herbivores, and other plants that compete for nutrients and light. To survive under environmental challenges, plants have evolved signaling mechanisms that recognise environmental changes and perform fine-tuned actions that maintain cellular homeostasis. Controlled phosphorylation and dephosphorylation of proteins plays an important role in maintaining balanced flow of information within cells. In this study, I examined the role of protein phosphatase 2A (PP2A) on plant growth and acclimation under optimal and stressful conditions. To this aim, I studied gene expression profiles, proteomes and protein interactions, and their impacts on plant health and survival, taking advantage of the model plant Arabidopsis thaliana and the mutant approach. Special emphasis was made on two highly similar PP2A-B regulatory subunits, B’γ and B’ζ. Promoters of B’γ and B’ζ were found to be similarly active in the developing tissues of the plant. In mature leaves, however, the promoter of B’γ was active in patches in leaf periphery, while the activity of B’ζ promoter was evident in leaf edges. The partially overlapping expression patterns, together with computational models of B’γ and B’ζ within trimeric PP2A holoenzymes suggested that B’γ and B’ζ may competitively bind into similar PP2A trimmers and thus influence each other’s actions. Arabidopsis thaliana pp2a-b’γ and pp2a-b’γζ double mutants showed dwarfish phenotypes, indicating that B’γ and B’ζ are needed for appropriate growth regulation under favorable conditions. However, while pp2a-b’γ displayed constitutive immune responses and appearance of premature yellowings on leaves, the pp2a-b’γζ double mutant supressed these yellowings. More detailed analysis of defense responses revealed that B’γ and B’ζ mediate counteracting effects on salicylic acid dependent defense signalling. Associated with this, B’γ and B’ζ were both found to interact in vivo with CALCIUM DEPENDENT PROTEIN KINASE 1 (CPK1), a crucial element of salicylic acid signalling pathway against pathogens in plants. In addition, B’γ was shown to modulate cellular reactive oxygen species (ROS) metabolism by controlling the abundance of ALTERNATIVE OXIDASE 1A and 1D in mitochondria. PP2A B’γ and B’ζ subunits turned out to play crucial roles in the optimization of plant choices during their development. Taken together, PP2A allows fluent responses to environmental changes, maintenance of plant homeostasis, and grant survivability with minimised cost of redirection of resources from growth to defence.

Prosessiteollisuuden sekoittimen elinkaariarviointi

Työn tavoitteena oli tehdä elinkaariarviointi (LCA) prosessiteollisuuden sekoittimelle Helmix HF-80 ja analysoida LCA-tulokset, vaikutus ilmaston lämpenemisen potentiaalin (GWP) suhteen, sekä tutkia GWP-vaikutuksen pienentämisen mahdollisuuksia. Tutkittavan sekoittimen mahdolliset käyttökohteet ovat sellu- ja paperiteollisuus, raskaiden jätenesteiden käsittely, sekä muut teollisuusalueet, joissa käytetään tämän tyyppisiä laitteita. Työssä on muun muassa käsitelty sekoitusprosessit, sekoituslaitteiden tyypit, niiden rakenteiden ominaisuudet, käyttötarkoitus, toimintaperiaatteet, sekä sellu- ja paperi-teollisuudessa käytettävien sekoittimien yleiskatsaus. Työssä on myös kuvattu elinkaariarviointi (LCA) -menetelmä ja sen käyttötarkoitus. Tärkeimmistä tuloksista voi mainita sen, että sekoittimen (ilman säiliötä, sähkömoottoria ja vaihteistoa) kokoelinkaaren ilmastonlämpenemisen potentiaali (GWP) on noin 750 000 kg CO2-Equiv. Sekoittimen tuotanto- ja kierrätysaikana syntyy vain 1200 kg CO2-Equiv. ja suurin osa 748 000 kg CO2-Equiv. johtuu sähköenergian kulutuksesta käytön aikana. Käyttöajan vaikutusta voisi pienentää arvoksi 0 kg CO2-Equiv. käyttämällä pelkästään uusiutuvaa energiaa. Jos tuotantoaikana käytetty energia myös korvataan uusiutuvalla energialla, niin GWP-arvo koko elinkaaren aikana laskee arvoon 1006 kg CO2eqv., mikä on vain 0,13 % saaduista tuloksista. Suurin osa tästä arvosta liittyy sekoittimen materiaalin, tässä tapauksessa ruostumattoman teräksen tuotantoon.

Cohesion Metrics for Improving Software Quality

Abstract Software product metrics aim at measuring the quality of software. Modu- larity is an essential factor in software quality. In this work, metrics related to modularity and especially cohesion of the modules, are considered. The existing metrics are evaluated, and several new alternatives are proposed. The idea of cohesion of modules is that a module or a class should consist of related parts. The closely related principle of coupling says that the relationships between modules should be minimized. First, internal cohesion metrics are considered. The relations that are internal to classes are shown to be useless for quality measurement. Second, we consider external relationships for cohesion. A detailed analysis using design patterns and refactorings confirms that external cohesion is a better quality indicator than internal. Third, motivated by the successes (and problems) of external cohesion metrics, another kind of metric is proposed that represents the quality of modularity of software. This metric can be applied to refactorings related to classes, resulting in a refactoring suggestion system. To describe the metrics formally, a notation for programs is developed. Because of the recursive nature of programming languages, the properties of programs are most compactly represented using grammars and formal lan- guages. Also the tools that were used for metrics calculation are described.

The Role of HR Management in the Corporate Matrix System

The successful performance of company in the market relates to the quality management of human capital aiming to improve the company's internal performance and external implementation of the core business strategy. Companies with matrix structure focusing on realization and development of innovation and technologies for the uncertain market need to select thoroughly the approach to HR management system. Human resource management has a significant impact on the organization and use a variety of instruments such as corporate information systems to fulfill their functions and objectives. There are three approaches to strategic control management depending on major impact on the major interference in employee decision-making, development of skills and his integration into the business strategy. The mainstream research has focus only on the framework of strategic planning of HR and general productivity of firm, but not on features of organizational structure and corporate software capabilities for human capital. This study tackles the before mentioned challenges, typical for matrix organization, by using the HR control management tools and corporate information system. The detailed analysis of industry producing and selling electromotor and heating equipment in this master thesis provides the opportunity to improve system for HR control and displays its application in the ERP software. The results emphasize the sustainable role of matrix HR input control for creating of independent project teams for matrix structure who are able to respond to various uncertainties of the market and use their skills for improving performance. Corporate information systems can be integrated into input control system by means of output monitoring to regulate and evaluate the processes of teams, using key performance indicators and reporting systems.