Absorptive capacity and the effect of social integration mechanisms in knowledge utilization

Tiedosta on tullut määräävä tekijä yrityksensuorituskyvylle. Yritykset hankkivat aktiivisesti uutta tietoa ulkoisesta ympäristöstään ja tallentavat sitä tietokantoihinsa. Uusi tieto on innovaatioiden ja uusien ideoiden peruselementti. Uudet ideat pitää myös kaupallistaa, jotta niiden avulla voidaan hankkia kilpailuetua. Absorptiivisen kapasiteetin malli yhdistää tiedon prosessointiin liittyvät kyvykkyydet, jotka vaikuttavat yrityksen kykyyn hyödyntää tietoa tehokkaasti. Ennen kuin tietoa voidaan käyttää uusien tuotteiden ja palveluiden luomiseen, täytyy sitä jakaa yrityksessä ja muuttaa se yrityksen toimintaa palvelevaksi. Aiemmissa tutkimuksissa innovaatiot ovat vahvasti liitetty yrityksen kykyyn uudistua. Tämä pro gradu -tutkielma tutkii sosiaalisten integraatiomekanismien vaikutusta potentiaalisen absorptiivisen kapasiteetin muuttamiseen toteutuneeksi absorptiiviseksi kapasiteetiksi. Yksilöiden ja osastojen välisen yhteistyön sekä luottamuksen vaikutus tiedon sisäistämiseen tutkittiin. Tutkielma pohjautuu monikansallisessa yrityksessä keväällä 2006 suoritettuun uudistumiskyky-tutkimukseen. Tutkielma keskittyy yrityksen kykyyn uudistua uuden tiedon ja innovaatioiden avulla. Tutkielma on kvantitatiivinen tapaustutkimus. Tutkielmassa tehtyjen havaintojen mukaan sosiaaliset integraatiomekanismit ovat tärkeitä uuden tiedon hyödyntämisessä. Tiedon eksplisiittyyden havaitaan vaikuttavan tiedon muuttamiseen yritykselle hyödylliseksi resurssiksi.

Dehulling capacity and storability of naked oat

Selostus: Paljasjyväisen kauran kuoriutuvuus ja säilyvyys

Enhancing absorptive capacity in a non-research and development. An action research approach to converting individual observations into organisational awareness

The ability to recognize potential knowledge and convert it into business opportunities is one of the key factors of renewal in uncertain environments. This thesis examines absorptive capacity in the context of non-research and development innovation, with a primary focus on the social interaction that facilitates the absorption of knowledge. It proposes that everyone is and should be entitled to take part in the social interaction that shapes individual observations into innovations. Both innovation and absorptive capacity have been traditionally related to research and development departments and institutions. These innovations need to be adopted and adapted by others. This so-called waterfall model of innovations is only one aspect of new knowledge generation and innovation. In addition to this Science–Technology–Innovation perspective, more attention has been recently paid to the Doing–Using–Interacting mode of generating new knowledge and innovations. The amount of literature on absorptive capacity is vast, yet the concept is reified. The greater part of the literature links absorptive capacity to research and development departments. Some publications have focused on the nature of absorptive capacity in practice and the role of social interaction in enhancing it. Recent literature on absorptive capacity calls for studies that shed light on the relationship between individual absorptive capacity and organisational absorptive capacity. There has also been a call to examine absorptive capacity in non-research and development environments. Drawing on the literature on employee-driven innovation and social capital, this thesis looks at how individual observations and ideas are converted into something that an organisation can use. The critical phases of absorptive capacity, during which the ideas of individuals are incorporated into a group context, are assimilation and transformation. These two phases are seen as complementary: whereas assimilation is the application of easy-to-accept knowledge, transformation challenges the current way of thinking. The two require distinct kinds of social interaction and practices. The results of this study can been crystallised thus: “Enhancing absorptive capacity in practicebased non-research and development context is to organise the optimal circumstances for social interaction. Every individual is a potential source of signals leading to innovations. The individual, thus, recognises opportunities and acquires signals. Through the social interaction processes of assimilation and transformation, these signals are processed into the organisation’s reality and language. The conditions of creative social capital facilitate the interplay between assimilation and transformation. An organisation that strives for employee-driven innovation gains the benefits of a broader surface for opportunity recognition and faster absorption.” If organisations and managers become more aware of the benefits of enhancing absorptive capacity in practice, they have reason to assign resources to those practices that facilitate the creation of absorptive capacity. By recognising the underlying social mechanisms and structural features that lead either to assimilation or transformation, it is easier to balance between renewal and effective operations.

Timing of Capacity Change: Models for Capital Intensive Industry

The suitable timing of capacity investments is a remarkable issue especially in capital intensive industries. Despite its importance, fairly few studies have been published on the topic. In the present study models for the timing of capacity change in capital intensive industry are developed. The study considers mainly the optimal timing of single capacity changes. The review of earlier research describes connections between cost, capacity and timing literature, and empirical examples are used to describe the starting point of the study and to test the developed models. The study includes four models, which describe the timing question from different perspectives. The first model, which minimizes unit costs, has been built for capacity expansion and replacement situations. It is shown that the optimal timing of an investment can be presented with the capacity and cost advantage ratios. After the unit cost minimization model the view is extended to the direction of profit maximization. The second model states that early investments are preferable if the change of fixed costs is small compared to the change of the contribution margin. The third model is a numerical discounted cash flow model, which emphasizes the roles of start-up time, capacity utilization rate and value of waiting as drivers of the profitable timing of a project. The last model expands the view from project level to company level and connects the flexibility of assets and cost structures to the timing problem. The main results of the research are the solutions of the models and analysis or simulations done with the models. The relevance and applicability of the results are verified by evaluating the logic of the models and by numerical cases.

The Reflections of Strategic Orientation on profitability - A resource-based study in pulp and paper industry

Tutkielman tavoitteena oli analysoida erilaisia strategisia orientaatioita sellu- ja paperiteollisuudessa. Sellu- ja paperiteollisuus on kohtaamassa strategisia haasteita, jotka ulottuvat syvälle sen rakenteisiin. Yritykset ovat valinneet erilaisia lähestymistapoja organisoidessaan tuotantoa ja kansainvälistä arvoketjuaan tässä muuttuvassa ympäristössä. Tutkimukseen valittiin 30 suurinta sellu- ja paperiteollisuudessa toimivaa yritystä ja mahdollisia syitä kannattavuuseroihin yritysten välillä analysoitiin. Yritysten strategista orientaatiota tarkasteltiin vertailemalla muun muassa seuraavia tekijöitä: vertikaalinen integraatioaste, tuotevalikoiman laajuus, tuotantokapasiteetin levinneisyys ja tuotantokapasiteetin ikä. Kannattavuutta mitattiin erilaisilla talouden tunnusluvuilla (liikevoitto, oman pääoman tuotto-%, koko pääoman tuotto-%). Tulosten mukaan yrityksiä voidaan ryhmitellä strategisen orientaation perusteella ja ryhmien välillä on kannattavuuseroja.

Impact of Investment Strategies on Performance in Pulp and Paper Industry

The main objective of this study was to examine, what kind of investment strategies the leading European and North American pulp and paper industry companies (PPI) used in 1991-2003, and how the selected strategies affected their performance. The investment strategies were categorised in three classes including mergers and acquisitions, investments in new capacity and investments in existing capacity. The results showed that mergers and acquisitions represented the largest share of total investments in 1991-2003 followed by investments in existing capacity. PPI companies changed investment strategies over time by increasing the share of mergers and acquisitions, which decreased investments in new capacity especially among North American companies. According to the results, good asset quality and investments in new and existing capacity provided better profitability than often expensive acquisitions. Also the capacity decreases had a positive impact on profitability. Average asset quality and profitability were higher among European companies. The study concluded that in the long term the available value creating investment opportunities should limit capital expenditure levels, not the relation of capital expenditure to depreciation.

Optimization of short term power trading between Russia, Finland and Baltic countries

Russian and Baltic electricity markets are in the process of reformation and development on the way for competitive and transparent market. Nordic market also undergoes some changes on the way to market integration. Old structure and practices have been expired whereas new laws and rules come into force. The master thesis describes structure and functioning of wholesale electricity markets, cross-border connections between different countries. Additionally methods of cross-border trading using different methods of capacity allocation are disclosed. The main goal of present thesis is to study current situation at different electricity markets and observe changes coming into force as well as the capacity and electricity balances forecast in order to optimize short term power trading between countries and estimate the possible profit for the company.

Position sensorless electrically excited synchronous motor drive for industrial use based on direct flux linkage and torque control

Synchronous machines with an AC converter are used mainly in large drives, for example in ship propulsion drives as well as in rolling mill drives in steel industry. These motors are used because of their high efficiency, high overload capacity and good performance in the field weakening area. Present day drives for electrically excited synchronous motors are equipped with position sensors. Most drives for electrically excited synchronous motors will be equipped with position sensors also in future. This kind of drives with good dynamics are mainly used in metal industry. Drives without a position sensor can be used e.g. in ship propulsion and in large pump and blower drives. Nowadays, these drives are equipped with a position sensor, too. The tendency is to avoid a position sensor if possible, since a sensor reduces the reliability of the drive and increases costs (latter is not very significant for large drives). A new control technique for a synchronous motor drive is a combination of the Direct Flux Linkage Control (DFLC) based on a voltage model and a supervising method (e.g. current model). This combination is called Direct Torque Control method (DTC). In the case of the position sensorless drive, the DTC can be implemented by using other supervising methods that keep the stator flux linkage origin centered. In this thesis, a method for the observation of the drift of the real stator flux linkage in the DTC drive is introduced. It is also shown how this method can be used as a supervising method that keeps the stator flux linkage origin centered in the case of the DTC. In the position sensorless case, a synchronous motor can be started up with the DTC control, when a method for the determination of the initial rotor position presented in this thesis is used. The load characteristics of such a drive are not very good at low rotational speeds. Furthermore, continuous operation at a zero speed and at a low rotational speed is not possible, which is partly due to the problems related to the flux linkage estimate. For operation in a low speed area, a stator current control method based on the DFLC modulator (DMCQ is presented. With the DMCC, it is possible to start up and operate a synchronous motor at a zero speed and at low rotational speeds in general. The DMCC is necessary in situations where high torque (e.g. nominal torque) is required at the starting moment, or if the motor runs several seconds at a zero speed or at a low speed range (up to 2 Hz). The behaviour of the described methods is shown with test results. The test results are presented for the direct flux linkage and torque controlled test drive system with a 14.5 kVA, four pole salient pole synchronous motor with a damper winding and electric excitation. The static accuracy of the drive is verified by measuring the torque in a static load operation, and the dynamics of the drive is proven in load transient tests. The performance of the drive concept presented in this work is sufficient e.g. for ship propulsion and for large pump drives. Furthermore, the developed methods are almost independent of the machine parameters.

Sales and Operations Planning Implementation

The master’s thesis focused on implementing a sales and operations planning process. The main objectives were to create planning methods and tools for the implementation. The ultimate goal of the process, beyond this master’s thesis, is to balance the supply of products with customer demand, with optimized profitability. The theoretical part focused on giving a thorough view on the sales and operations planning process. The basis for a monthly planning cycle was identified. Methods, tools, and metrics for demand forecasting and operations planning were also introduced. Based on the theoretical part, a method for forecasting, a forecast spreadsheet, and a forecast accuracy metric were designed. A spreadsheet tool and methods were also designed for the monthly planning of production volumes, capacity, and inventory. The implementation progress was reviewed for two product families for three months. The sales and operations planning process was able to successfully identify a demand peak for the product families. Suggestions for the future of sales and operations planning were also made.

Acidic dissolution of iron oxides and regeneration of a ceramic filter medium

The dewatering of iron ore concentrates requires large capacity in addition to producing a cake with low moisture content. Such large processes are commonly energy intensive and means to lower the specific energy consumption are needed. Ceramic capillary action disc filters incorporate a novel filter medium enabling the harnessing of capillary action, which results in decreased energy consumption in comparison to traditional filtration technologies. As another benefit, the filter medium is mechanically and chemically more durable than, for example, filter cloths and can, thus, withstand harsh operating conditions and possible regeneration better than other types of filter media. In iron ore dewatering, the regeneration of the filter medium is done through a combination of several techniques: (1) backwashing, (2) ultrasonic cleaning, and (3) acid regeneration. Although it is commonly acknowledged that the filter medium is affected by slurry particles and extraneous compounds, published research, especially in the field of dewatering of mineral concentrates, is scarce. Whereas the regenerative effect of backwashing and ultrasound are more or less mechanical, regeneration with acids is based on chemistry. The chemistry behind the acid regeneration is, naturally, dissolution. The dissolution of iron oxide particles has been extensively studied over several decades but those studies may not necessarily be directly applicable in the regeneration of the filter medium which has undergone interactions with the slurry components. The aim of this thesis was to investigate if free particle dissolution indeed correlates with the regeneration of the filter medium. For this purpose, both free particle dissolution and dissolution of surface adhered particles were studied. The focus was on acidic dissolution of iron oxide particles and on the study of the ceramic filter medium used in the dewatering of iron ore concentrates. The free particle dissolution experiments show that the solubility of synthetic fine grained iron oxide particles in oxalic acid could be explained through linear models accounting for the effects of temperature and acid concentration, whereas the dissolution of a natural magnetite is not so easily explained by such models. In addition, the kinetic experiments performed both support and contradict the work of previous authors: the suitable kinetic model here supports previous research suggesting solid state reduction to be the reaction mechanism of hematite dissolution but the formation of a stable iron oxalate is not supported by the results of this research. Several other dissolution mechanisms have also been suggested for iron oxide dissolution in oxalic acid, indicating that the details of oxalate promoted reductive dissolution are not yet agreed and, in this respect, this research offers added value to the community. The results of the regeneration experiments with the ceramic filter media show that oxalic acid is highly effective in removing iron oxide particles from the surface of the filter medium. The dissolution of those particles did not, however, exhibit the expected behaviour, i.e. complete dissolution. The results of this thesis show that although the regeneration of the ceramic filter medium with acids incorporates the dissolution of slurry particles from the surface of the filter medium, the regeneration cannot be assessed purely based upon free particle dissolution. A steady state, dependent on temperature and on the acid concentration, was observed in the dissolution of particles from the surface even though the limit of solubility of free iron oxide particles had not been reached. Both the regeneration capacity and efficiency, with regards to the removal of iron oxide particles, was found to be temperature dependent, but was not affected by the acid concentration. This observation further suggests that the removal of the surface adhered particles does not follow the dissolution of free particles, which do exhibit a dependency on the acid concentration. In addition, changes in the permeability and in the pore structure of the filter medium were still observed after the bulk concentration of dissolved iron had reached a steady state. Consequently, the regeneration of the filter medium continued after the dissolution of particles from the surface had ceased. This observation suggests that internal changes take place at the final stages of regeneration. The regeneration process could, in theory, be divided into two, possibly overlapping, stages: (1) dissolution of surface-adhered particles, and (2) dissolution of extraneous compounds from within the pore structure. In addition to the fundamental knowledge generated during this thesis, tools to assess the effects of parameters on the regeneration of the ceramic filter medium are needed. It has become clear that the same tools used to estimate the dissolution of free particles cannot be used to estimate the regeneration of a filter medium unless only a robust characterisation of the order of regeneration efficiency is needed.

Not Going it Alone: The US National Agenda for Digital Stewardship and Repositories

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014