IFRS 9 ‘Financial instruments’: Anticipated effects of the standard change at Kesko Group

IFRS 9 Financial instruments presents the classification and measurement, the impairment and the hedge accounting requirements for accounting of financial instruments. The standard was set by the International Accounting Standards Board to replace IAS 39 Financial instruments: Recognition and Measurement on 1 January 2018. Hence, the long-criticized and complexly experienced requirements for accounting of financial instruments will undergo the most significant reform. This thesis addresses anticipated effects of IFRS 9, focusing on the challenges the new classification and measurement requirements bring forth in the case organization Kesko. This thesis was conducted as an action research, in which, a case study method was applied. The thesis was conducted with a twofold manner, which involved general analysis of IFRS 9 and further covered distinct ambitions related to the case organization. For the general part, empirical data was gathered by interviewing two IFRS experts from KPMG and PwC, while the interviews within the case organization constituted for the case study. Further, the literature on the IFRS 9 was such scant that the theoretical examination was merged with the IFRS experts’ quotations that also strived to contribute to the overall objective of reinforcing the body of research related to the subject. This thesis indicates that IFRS 9 will most fundamentally reform the impairment and the hedge accounting requirements of financial instruments. Regard to impairment, the changes are anticipated to increase the amount of loan-loss provisions, whereas the relaxed hedge accounting requirements are expected to encourage more companies to commence the application of hedge accounting. The thesis provides empirical support on that the term business model for managing financial assets, introduced in IFRS 9, is ably hard to comprehend and remains ambiguous. It goes on to argue that the most prominent issue in defining the business model for managing financial assets is the limits set in IFRS 9 for selling financial assets. In consideration of Kesko, this thesis finds that the key effects of IFRS 9 are anticipated to be the reshaping of the organization’s treasury policy and further examination of the possibility to apply hedge accounting for foreign exchange derivatives. What is more, the thesis presumes that complying the requirements of IFRS 9 Kesko will apply the hold to collect and sell model for managing financial assets in future.

Uudelleenkäytettävän kuljetuspakkauksen liiketoimintamalli

Tässä työssä tutkitaan uudelleenkäytettävän kuljetuspakkauksen liiketoimintamahdollisuutta. Esimerkkinä tutkimuksessa on todellinen tilanne Suomalaisen kalustealan yrityksen pakkausprosessista. Tavoitteena on laatia liiketoimintamalli, jota hyödyntämällä voidaan aloittaa liiketoimintakumppanuus pakkausten käytössä. Työssä tutkitaan pakkauksen ja pakkaamisen nykytilanne ja tutkitaan mahdollisia hyötyjä yleisesti, sekä mahdollisia liiketoimintamalleja pakkauksen käyttöönottoon. Nykytilassa pakkaaminen kertakäyttöpakkaukseen on kustannustehoton ja käytettävyydeltään ongelmallinen ratkaisu. Pakkauksen käyttöönotto mahdollistaa merkittävän parannuksen pakkausprosessiin. Työn tuloksena esitellään kolme liiketoiminta mallia. Yksi liiketoimintamalleista on perustellusti toimivin ja sitä ehdotetaan käyttöönotettavaksi uudelleenkäytettävän pakkauksen käytössä kalusteiden kuljettamiseen. Mallissa kuljetuspakkaus toimii ammattilaistyökaluna sisäisesti omistajansa, eli tuotteita valmistavan yrityksen, sekä kuljetusyrityksen kesken. Kapea-alaista ratkaisua perustellaan mm. selkeällä kulurakenteella ja kokemuksen puutteella konseptin ja tuotteen toimivuudesta. Malli mahdollistaa koealustan pakkauksen käytölle ja lisäkokemus pakkauksen todellisesta toimivuudesta voi muuttaa liiketoimintamallia jatkossa laajempialaiseksi.

Future consumers’ perceptions of sustainability, and their reflections on buying decisions

The purpose of this quantitative study is to study future consumers’ perception of sustainability in relation to business in general and specifically concerning the forest industry. The aim is to understand, what they feel is important for sustainable business and how the forest industry, in their opinion, is performing in this respect. Further, it aims to study how these perceptions reflect in their buying decisions. The research was conducted by a quantitative survey in two countries, Finland and Hong Kong, in the spring of 2015. All data used in the research is primary. The result indicate that consumers see sustainability issues important today and in the future. Sustainability is seen important both for business in general for the forest industry. The industry is considered sustainable now, but room for improvements exists. The appreciation of sustainability does not reflect to buying decisions, however. The buying of ecological products seems to be more up to chance than to intention. Consumers are not proactive in searching for more ecological or responsible options. Information needs to be taken to them. Ecologicalness as such is still not a strong selling point.

Kestävien arvoehdotelmien kommunikointi

Haastava taloustilanne ja kiristynyt kilpailu pakottaa yritykset kehittämään uusia keinoja kilpailukyvyn parantamiseksi. Työn tavoitteena on löytää toimivia ratkaisuja kestävien arvoehdotelmien kommunikoinnille. Tutkimus on tehty suomalaisten puhdasta teknologiaa tarjoavien pk-yritysten näkökulmasta. Työ pyrkii selvittämään kuinka cleantech-yritykset voivat havainnollistaa ja markkinoida ympäristöystävällisten ratkaisujen tuomia arvoja. Työ sisältää kirjallisuuskatsauksen ja empiriaosion, joka koostuu alan yritysten haastattelujen tuloksista ja näiden analysoinnista. Kirjallisuuskatsaus antaa kattavan kuvan siitä, minkälaista lisäarvoa cleantech-yritysten tarjoomat tuottavat asiakkaille. Yrityshaastattelujen avulla kartoitettiin kestävien arvoehdotelmien kommunikoinnin todellista nykytilaa Suomessa. Kirjallisuuskatsauksen ja haastattelujen pohjalta selviää, miten yritykset käytännössä demonstroivat ja kommunikoivat erilaisia asiakashyötyjä sekä siinä kohtaamansa suurimmat haasteet. Työssä selvitettiin erilaisia käytössä olevia kommunikointikeinoja ja niitä tukevia käytäntöjä, joiden pohjalta työn loppuun on koottu parhaat käytännöt suomalaisille cleantech-alan pk-yrityksille.

Asiakkaan osallistuminen innovaatio- ja tuotekehitysprosessiin

Tässä tutkimuksessa tarkastellaan asiakkaan ja valmistajan osallistumista yhteistoiminnalliseen innovaatio- ja tuotekehitysprosessiin ja sen vaikutuksia yritysten kilpailukykyyn. Asiakaslähtöinen avoin innovaatio- ja tuotekehitystoiminta on yksi merkittävä kilpailuedun lähde, sillä se mahdollistaa tuotevariaatioiden nopeamman lanseerauksen ja asiakastarpeiden huomioimisen tuotekehitystoiminnassa. Tämän empiirisen tutkimuksen tavoitteena oli selvittää millä tavoin kulutustavaroihin kuuluvien muoti- ja sportvaatteiden suunnittelussa yhteistoiminnallinen innovaatio- ja tuotekehitystoiminta on mahdollista toteuttaa ja miten sitä voidaan hallita. Tutkimus toteutettiin kvalitatiivisena tapaustutkimuksena. Empiirinen aineisto kerättiin teemahaastatteluina tapausorganisaatiosta. Yhteistoiminnallisesta kehittämisestä ei ole olemassa yhtä kattavaa teoriaa, jota voitaisiin hyödyntää. Tämän vuoksi yritysten on luotava itse yhteistoiminnallisen innovaation ja tuotekehityksen viitekehys, joka parhaiten palvelee liiketoiminnan tarpeita. Viitekehys ja käytettävät menetelmät sekä yhteistoiminnallisuutta tukevat työvälineet ovat riippuvaisia mm. toimialasta ja sen markkinatilanteesta, liiketoimintamalleista, yrityksen toimintaympäristöstä, asiakkaista ja kehittämisen kohteeksi valitusta tuotealueesta. Empiirinen tutkimus osoittaa, että yhteistoiminnallinen innovaatio voi olla kilpailuedun lähde sekä valmistajille että asiakkaalle, mutta vaatii aina yrityskohtaista sopeuttamista. Tutkimuksen mukaan hyvin johdettu yhteistyömalli, oikeat tuotevalinnat ja asiakasinformaation monipuolinen hyödyntäminen vaikuttavat positiivisesti kehittämisprojektin tuloksiin.

A Belief rule-based environmental responsibility assessment system for small and medium-sized enterprises

Various environmental management systems, standards and tools are being created to assist companies to become more environmental friendly. However, not all the enterprises have adopted environmental policies in the same scale and range. Additionally, there is no existing guide to help them determine their level of environmental responsibility and subsequently, provide support to enable them to move forward towards environmental responsibility excellence. This research proposes the use of a Belief Rule-Based approach to assess an enterprise’s level commitment to environmental issues. The Environmental Responsibility BRB assessment system has been developed for this research. Participating companies will have to complete a structured questionnaire. An automated analysis of their responses (using the Belief Rule-Based approach) will determine their environmental responsibility level. This is followed by a recommendation on how to progress to the next level. The recommended best practices will help promote understanding, increase awareness, and make the organization greener. BRB systems consist of two parts: Knowledge Base and Inference Engine. The knowledge base in this research is constructed after an in-depth literature review, critical analyses of existing environmental performance assessment models and primarily guided by the EU Draft Background Report on "Best Environmental Management Practice in the Telecommunications and ICT Services Sector". The reasoning algorithm of a selected Drools JBoss BRB inference engine is forward chaining, where an inference starts iteratively searching for a pattern-match of the input and if-then clause. However, the forward chaining mechanism is not equipped with uncertainty handling. Therefore, a decision is made to deploy an evidential reasoning and forward chaining with a hybrid knowledge representation inference scheme to accommodate imprecision, ambiguity and fuzzy types of uncertainties. It is believed that such a system generates well balanced, sensible and Green ICT readiness adapted results, to help enterprises focus on making improvements on more sustainable business operations.

A Segmentation Model for Hi-tech Business Markets

Segmentointi on strateginen työkalu, joka tehostaa yrityksen resurssien käyttöä ja siten vaikuttaa kaikkiin asiakkuuksiin liittyviin liiketoimintaprosesseihin. Työn tavoitteena oli muodostaa segmentointimalli (sisältää sekä segmentointiprosessin että kriteerit) yritysinternetmarkkinoille. Työn tuloksia voidaan kuitenkin tulkita ja soveltaa laajemmin korkean teknologian yrityspalvelumarkkinoille. Tämä tutkielma lisää tietämystämme ja tarjoaa uudenlaisen näkemyksen segmentointiin korkean teknologian yrityspalvelumarkkinoilla. Työssä kuvataan korkean teknologian ja yritys- sekä palvelumarkkinoinnin erityispiirteitä ja kuinka nämä tekijät vaikuttavat segmentointimallin. Tutkimuksessa selvitettiin kohdeyrityksen nykyiset segmentointikäytännöt henkilökohtaisin asiantuntijahaastatteluin. Haastatteluiden avulla luotiin kuva nykyisistä lähestymistavoista sekä niiden lähtökohdista, vahvuuksista ja haasteista. Haastatteluiden analysoinnin jälkeen perustettiin projekti segmentoinnin kehittämiseksi. Työ tuloksena luotiin segmentointimalli, joka tarjoaa vankan perustan segmentoinnin kehittämiselle jatkuvana prosessina. Työssä esitetään segmentoinnin integroimista yrityksen asiakkuuksiin liittyviin liiketoimintaprosesseihin, joka usein puuttuu aiemmista töistä, sekä informaationkulun tehostamista segmentoinnin hyödyntämiseksi tehokkaammin. Segmentointi on strateginen työkalu ja vaatii siksi ylemmän johdon tuen ja sitoutumisen. Oikein sovellettuna segmentointi tarjoaa liiketoiminnalle mahdollisuuden merkittäviin etuihin kuten asiakastyytyväisyyden ja kannattavuuden kehittämiseen.

Segmentation model for small and medium size business sector: Case Oy Compaq Computer Ab

Markkinasegmentointi nousi esiin ensi kerran jo 50-luvulla ja se on ollut siitä lähtien yksi markkinoinnin peruskäsitteistä. Suuri osa segmentointia käsittelevästä tutkimuksesta on kuitenkin keskittynyt kuluttajamarkkinoiden segmentointiin yritys- ja teollisuusmarkkinoiden segmentoinnin jäädessä vähemmälle huomiolle. Tämän tutkimuksen tavoitteena on luoda segmentointimalli teollismarkkinoille tietotekniikan tuotteiden ja palveluiden tarjoajan näkökulmasta. Tarkoituksena on selvittää mahdollistavatko case-yrityksen nykyiset asiakastietokannat tehokkaan segmentoinnin, selvittää sopivat segmentointikriteerit sekä arvioida tulisiko tietokantoja kehittää ja kuinka niitä tulisi kehittää tehokkaamman segmentoinnin mahdollistamiseksi. Tarkoitus on luoda yksi malli eri liiketoimintayksiköille yhteisesti. Näin ollen eri yksiköiden tavoitteet tulee ottaa huomioon eturistiriitojen välttämiseksi. Tutkimusmetodologia on tapaustutkimus. Lähteinä tutkimuksessa käytettiin sekundäärisiä lähteitä sekä primäärejä lähteitä kuten case-yrityksen omia tietokantoja sekä haastatteluita. Tutkimuksen lähtökohtana oli tutkimusongelma: Voiko tietokantoihin perustuvaa segmentointia käyttää kannattavaan asiakassuhdejohtamiseen PK-yritys sektorilla? Tavoitteena on luoda segmentointimalli, joka hyödyntää tietokannoissa olevia tietoja tinkimättä kuitenkaan tehokkaan ja kannattavan segmentoinnin ehdoista. Teoriaosa tutkii segmentointia yleensä painottuen kuitenkin teolliseen markkinasegmentointiin. Tarkoituksena on luoda selkeä kuva erilaisista lähestymistavoista aiheeseen ja syventää näkemystä tärkeimpien teorioiden osalta. Tietokantojen analysointi osoitti selviä puutteita asiakastiedoissa. Peruskontaktitiedot löytyvät mutta segmentointia varten tietoa on erittäin rajoitetusti. Tietojen saantia jälleenmyyjiltä ja tukkureilta tulisi parantaa loppuasiakastietojen saannin takia. Segmentointi nykyisten tietojen varassa perustuu lähinnä sekundäärisiin tietoihin kuten toimialaan ja yrityskokoon. Näitäkään tietoja ei ole saatavilla kaikkien tietokannassa olevien yritysten kohdalta.

Social ventures : the development of the theory of sustainable contributive advantage and initial empirical tests

This thesis attempts to fill gaps in both a theoretical basis and an operational and strategic understanding in the areas of social ventures, social entrepreneurship and nonprofit business models. This study also attempts to bridge the gap in strategic and economic theory between social and commercial ventures. More specifically, this thesis explores sustainable competitive advantage from a resource-based theory perspective and explores how it may be applied to the nonmarket situation of nonprofit organizations and social ventures. It is proposed that a social value-orientation of sustainable competitive advantage, called sustainable contributive advantage, provides a more realistic depiction of what is necessary in order for a social venture to perform better than its competitors over time. In addition to providing this realistic depiction, this research provides a substantial theoretical contribution in the area of economics, social ventures, and strategy research, specifically in regards to resource-based theory. The proposed model for sustainable contributive advantage uses resource-based theory and competitive advantage in order to be applicable to social ventures. This model proposes an explanation of a social venture’s ability to demonstrate consistently superior performance. In order to determine whether sustainable competitive advantage is in fact, appropriate to apply to both social and economic environments, quantitative analyses are conducted on a large sample of nonprofit organizations in a single industry and then compared to similar quantitative analyses conducted on commercial ventures. In comparing the trends and strategies between the two types of entities from a quantitative perspective, propositions are developed regarding a social venture’s resource utilization strategies and their possible impact on performance. Evidence is found to support the necessity of adjusting existing models in resource-based theory in order to apply them to social ventures. Additionally supported is the proposed theory of sustainable contributive advantage. The thesis concludes with recommendations for practitioners, researchers and policy makers as well as suggestions for future research paths.

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance This thesis deals with enabling change in universities, more explicitly enhancing education for sustainable development with tools for quality assurance. Change management is a discipline within management that was developed in the 1980s because business changed from being predictable to unpredictable. The PEST mnemonic is a method to categorize factors enabling change; such as political, economic, socio-cultural and technological factors, which all affect higher education. A classification of a change, in either hard or soft, can help understanding the type of change that an organization is facing. Hard changes are more applied to problems that have clear objectives and indicators, with a known cause of the problem. Soft changes are applied to larger problems that affect the entire organization or beyond it. The basic definition for sustainable development is: the future generations should have similar opportunities as the previous. The UN has set as a global goal an integration of education for sustainable development (ESD) at all levels of education during 2005- 2014. The goal is set also in universities, the graduates of which are future leaders for all labor markets. The objective for ESD in higher education is that graduates obtain the competence to take economic, social and environmental costs and benefits into account when making decisions. Knowledge outcomes should aim for systematic and holistic thinking, which requires cross disciplinary education. So far, the development of ESD has not achieved its goals. The UN has identified a need for more transdisclipnary research in ESD. A joint global requirement for universities is quality assurance, the aim of which is to secure and improve teaching and learning. Quality, environmental and integrated management systems are used by some universities for filling the quality assurance requirements. The goal of this thesis is to open up new ways for enhancing ESD in universities, beyond the forerunners; by exploring how management systems could be used as tools for promoting ESD. The thesis is based on five studies. In the first study, I focus on if and how tools for quality assurance could be benefitted for promoting ESD. It is written from a new perspective, the memetic, for reaching a diversity of faculty. A meme is an idea that diffuses from brain to brain. It can be applied for cultural evolution. It is a theory that is based on the evolutionary theory by Darwin, applied for social sciences. In the second Paper, I present the results from the development of the pilot process model for enhancing ESD with management systems. The development of the model is based on a study that includes earlier studies, a survey in academia and an analysis of the practice in 11 universities in the Nordic countries. In the third study, I explore if the change depends on national culture or if it is global. It is a comparative study on both policy and implementation level, between the Nordic countries and China. The fourth study is a single case study based on change management. In this study, I identify what to consider in order to enable the change: enhancing ESD with tools for quality assurance in universities. In the fifth Paper, I present the results of the process model for enhancing ESD with management systems. The model was compared with identified drivers and barriers for enhancing ESD and for implementing management systems. Finally, the process model was piloted and applied for identifying sustainability aspects in curricula. Action research was chosen as methodology because there are not already implemented approaches using quality management for promoting ESD, why the only way to study this is to make it happen. Another reason for choosing action research is since it is essential to involve students and faculty for enhancing ESD. Action based research consists of the following phases: a) diagnosing, b) planning action, c) taking action and d) evaluating action. This research was made possible by a project called Education for Sustainable Development in Academia in the Nordic countries, ESDAN, in which activities were divided into these four phases. Each phase ended with an open seminar, where the results of the study were presented. The objective for the research project was to develop a process for including knowledge in sustainable development in curricula, which could be used in the quality assurance work. Eleven universities from the Nordic countries cooperated in the project. The aim was, by applying the process, to identify and publish examples of relevant sustainability aspects in different degree programs in universities in the Nordic countries. The project was partly financed by the Nordic Council of Ministers and partly by the participating pilot universities. Based on the results of my studies, I consider that quality, environmental and integrated management systems can be used for promoting ESD in universities. Relevant sustainability aspects have been identified in different fields of studies by applying the final process model. The final process model was compared with drivers and barriers for enhancing ESD and for implementing management systems in universities and with succeeding with management systems in industry. It corresponds with these, meaning that drivers are taken into account and barriers tackled. Both ESD and management systems in universities could be considered successful memes, which can reflect an effective way of communication among individuals. I have identified that management systems could be used as tools for hard changes and to support the soft change of enhancing ESD in universities with management system. Based on the change management study I have summarized recommendations on what to consider in order to enable the studied change. The main practical implications of the results are that the process model could be applied for assessment, benchmarking and communication of ESD, connected to quality assurance, when applied. This is possible because the information can be assembled in one picture, which facilitates comparison. The memetic approach can be applied for structuring. It is viable to make comparative studies between cultures, for getting insight in special characteristics of the own culture. Action based research is suitable for involving faculty. Change management can be applied for planning a change, which both enhancing ESD and developing management systems are identified to be.

A Business continuity management maturity model : the search for an ISO 22301 Compliant BCM Maturity model

BCM (business continuity Management) is a holistic management process aiming at ensuring business continuity and building organizational resilience. Maturity models offer organizations a tool for evaluating their current maturity in a certain process. In the recent years BCM has been subject to international ISO standardization, while the interest of organizations to bechmark their state of BCM agains standards and the use of maturity models for these asessments has increased. However, although new standards have been introduced, very little attention has been paid to reviewing the existing BCM maturity models in research - especially in the light of the new ISO 22301 standard for BCM. In this thesis the existing BCM maturily models are carefully evaluated to determine whetherthey could be improved. In order to accomplish this, the compliance of the existing models to the ISO 22301 standard is measured and a framework for assessing a maturitymodel´s quality is defined. After carefully evaluating the existing frameworks for maturity model development and evaluation, an approach suggested by Becker et al. (2009) was chosen as the basis for the research. An additionto the procedural model a set of seven research guidelines proposed by the same authors was applied, drawing on the design-science research guidelines as suggested by Hevner et al. (2004). Furthermore, the existing models´ form and function was evaluated to address their usability. Based on the evaluation of the existing BCM maturity models, the existing models were found to have shortcomings in each dimension of the evaluation. Utilizing the best of the existing models, a draft version for an enhanced model was developed. This draft model was then iteratively developed by conducting six semi-structured interviews with BCM professionals in finland with the aim of validating and improving it. As a Result, a final version of the enhanced BCM maturity model was developed, conforming to the seven key clauses in the ISO 22301 standard and the maturity model development guidelines suggested by Becker et al. (2009).

Net working capital estimation model in project business

The objective of this Master’s thesis is to develop a model which estimates net working capital (NWC) monthly in a year period. The study is conducted by a constructive research which uses a case study. The estimation model is designed in the need of one case company which operates in project business. Net working capital components should be linked together by an automatic model and estimated individually, including advanced components of NWC for example POC receivables. Net working capital estimation model of this study contains three parts: output template, input template and calculation model. The output template gets estimate values automatically from the input template and the calculation model. Into the input template estimate values of more stable NWC components are inputted manually. The calculate model gets estimate values for major affecting components automatically from the systems of a company by using a historical data and made plans. As a precondition for the functionality of the estimation calculation is that sales are estimated in one year period because the sales are linked to all NWC components.