Immateriellt kulturarv som begrepp och process : folkloristiska perspektiv på kulturarv i Finlands svenskbygder med folkmusik som exempel

Cultural heritage has become something of an in-word in recent times. Intangible cultural heritage, however, is a category that has received relatively little attention. This folkloristic study focuses on intangible cultural heritage as concept and as process. Folkloristics as a scholarly branch emphasizes non-material culture. Consequently, there is a big potential in bringing existing knowledge of folklore together with current scholarly theories concerning cultural heritage in order to expand the understanding of intangible cultural heritage. In this thesis cultural heritage is regarded as a symbolic construct, which is spoken of and discussed in specific ways. The study of intangible cultural heritage (Swe. kulturarv) as concept focuses on this area. For a cultural component to be experienced as intangible cultural heritage it is, however, not enough to discuss it in those terms. Instead, cultural heritage status needs to be acted out during lengthy processes. This is demonstrated by the study of intangible cultural heritage as process. As a consequence performativity appears crucial to an understanding of cultural heritage – when a sufficient number of people speak and act as if a cultural component has a special status, it will also be perceived as cultural heritage. In this dissertation intangible cultural heritage is studied through cultural analysis, more specifically through discourse analysis. The usage of the concept intangible cultural heritage within cultural organizations, in scholarly use and in the Swedish-speaking press in Finland is examined. Traditional music in the Swedish-speaking districts of Finland is used as a case study of intangible cultural heritage as process. The examination concerns how traditional music, an intangible cultural component, has been discussed, transformed, standardized and objectified in a cultural heritage process. Cultural heritage is generally used as a token of value so that certain cultural components, both intangible and tangible, which are discussed in terms of cultural heritage are perceived to be valuable and should therefore be safeguarded. Intangible cultural heritage depends on performance, that is practitioners use their bodies to act out their traditional knowledge through song, handicraft, storytelling and so on. Intangible cultural components can be transmitted to other individuals in a performance situation, and they can also be documented. In Finland documentation and subsequent filing in archives have been associated with safeguarding of intangible cultural heritage. If the aim of safeguarding is to uphold traditional practices, which is the case for among others UNESCO’s programs aimed at intangible cultural heritage, other efforts are called for: forms of safeguarding that support performance and transmission.

Karneval i klassrum – kunskap på hjul : en studie av elevers möten med clown analyserade med narrativ metod och poetisk etnografi

The aim of this study is to contribute to the knowledge about learning in and through art related to pupils’ study processes developing clown characters in secondary school. The pre understanding of this qualitative piece of micro ethnographic research is that the elaboration of clown has openness to play, creative activity and imagination. The art form clown inspires and motivates. The clown character creates a kind and friendly atmosphere, calls upon smile, which promotes learning. It is an art form promoting deep and personal reflection and evoking questions regarding identity formation. The pre understanding finally is that existential themes are brought to articulation in the art form clown. The problem formulation for the hermeneutic phenomenological study is an exploration of the meaning potential of an arts educational work with clown from the pupils’ as well as the teacher’s perspective. The study elaborates the following research questions: 1.) How are the pupils staging themselves in the work with clown? a) How are they constructing the clown character? b) How do they reflect upon their construction? c) What are the characteristics of the working process in the elaboration of clown? 2.) What is characteristic of the teacher’s contribution to the arts educational work? 3.) What is characteristic of the meaning making in the elaboration of clown? One group of 21 pupils and their drama teacher in a Swedish secondary school in six workshops (each one 90 minutes) elaborating the clown theme is the group under study through video observation, interviews, students’ logs and drawings, teacher log and researcher’s field notes. The theoretical framework comprises three perspectives on clown: a perspective on the culture of carnival, a drama education perspective and a performance perspective. Through a content analysis of texts about clown a set of characteristics for the clown is used as analytical concepts in the subsequent analysis of the pupils’ working process when they create three clown characters: August, the white clown and the bag lady. The results are presented as fictive narratives built on the video observations and the interviews. The presentation is brought to even more condensation through poetic ethnographic writing of haiku poems by the researcher. This ethnographic writing is idiomatic to the art form under study, and can be seen as a metaphorical meta commentary to the narratives. As a main result the researcher has developed a model describing the different aspects of the clown characters and the meaning potential of the clown as learning regarding exploration of identity and elaboration of existential questions regarding life, loneliness, love, religion and death.

Challenges of business process automation for small and medium enterprises

The aim of the study was to examine problems that small and medium enterprises are facing during the implementation of business process automation projects. Study reveals problems from the point of view of companies who are implementing automation projects and from the point of view of IT-integrators who are specifying in IT solutions for small and medium companies.

Integrating environmental aspects into product development process

Various regulations and customer requirements have made it necessary for Vacon Oyj to pay more attention to the environmental aspects in its processes. The main purpose of this master’s thesis project is to define how environmental aspects could be integrated into Vacon’s product development process. The aim is to find out the most important environmental aspects for the company to address, to examine how these could be taken into account during the development process and to map the critical factors that need consideration in order to ensure the successful integration of environmental aspects into the design process. Based on the customer requirements and evolving regulations the most important aspects for Vacon include minimizing the amount of harmful substances, improving the recyclability and energy efficiency of the product and moreover providing meaningful information related to these aspects. To tackle these issues, a new DfE process was developed, tasks in each phase were described and responsibilities were indicated. To ensure the success of the DfE process, management commitment, support of other processes and significant improvements in ways the information is managed are required. The developers should be provided with training and support. Environmental expertise and knowledge in-house should be developed and establishing meaningful environmental indicators is suggested.

Spectrometrical Monitoring of Laser Sintering Process of Ceramic Material

This thesis is done as a part of project called FuncMama that is a project between Technical Research Centre of Finland (VTT), Oulu University (OY), Lappeenranta University of Technology (LUT) and Finnish industrial partners. Main goal of the project is to manufacture electric and mechanical components from mixed materials using laser sintering. Aim of this study was to create laser sintered pieces from ceramic material and monitor the sintering event by using spectrometer. Spectrometer is a device which is capable to record intensity of different wavelengths in relation with time. In this study the monitoring of laser sintering was captured with the equipment which consists of Ocean Optics spectrometer, optical fiber and optical lens (detector head). Light from the sintering process hit first to the lens system which guides the light in to the optical fibre. Optical fibre transmits the light from the sintering process to the spectrometer where wavelengths intensity level information is detected. The optical lens of the spectrometer was rigidly set and did not move along with the laser beam. Data which was collected with spectrometer from the laser sintering process was converted with Excel spreadsheet program for result’s evaluation. Laser equipment used was IPG Photonics pulse fibre laser. Laser parameters were kept mainly constant during experimental part and only sintering speed was changed. That way it was possible to find differences in the monitoring results without fear of too many parameters mixing together and affecting to the conclusions. Parts which were sintered had one layer and size of 5 x 5 mm. Material was CT2000 – tape manufactured by Heraeus which was later on post processed to powder. Monitoring of different sintering speeds was tested by using CT2000 reference powder. Moreover tests how different materials effect to the process monitoring were done by adding foreign powder Du Pont 951 which had suffered in re-grinding and which was more reactive than CT2000. By adding foreign material it simulates situation where two materials are accidently mixed together and it was studied if that can be seen with the spectrometer. It was concluded in this study that with the spectrometer it is possible to detect changes between different laser sintering speeds. When the sintering speed is lowered the intensity level of light is higher from the process. This is a result of higher temperature at the sintering spot and that can be noticed with the spectrometer. That indicates it could be possible to use spectrometer as a tool for process observation and support the idea of having system that can help setting up the process parameter window. Also important conclusion was how well the adding of foreign material could be seen with the spectrometer. When second material was added a significant intensity level raise could be noticed in that part where foreign material was mixed. That indicates it is possible to see if there are any variations in the material or if there are more materials mixed together. Spectrometric monitoring of laser sintering could be useful tool for process window observation and temperature controlling of the sintering process. For example if the process window for specific material is experimentally determined to get wanted properties and satisfying sintering speed. It is possible if the data is constantly recorded that the results can show faults in the part texture between layers. Changes between the monitoring data and the experimentally determined values can then indicate changes in the material being generated by material faults or by wrong process parameters. The results of this study show that spectrometer could be one possible tool for monitoring. But to get in that point where this all can be made possible much more researching is needed.

Software Test Process Development

In this thesis, the components important for testing work and organisational test process are identified and analysed. This work focuses on the testing activities in reallife software organisations, identifying the important test process components, observing testing work in practice, and analysing how the organisational test process could be developed. Software professionals from 14 different software organisations were interviewed to collect data on organisational test process and testing‐related factors. Moreover, additional data on organisational aspects was collected with a survey conducted on 31 organisations. This data was further analysed with the Grounded Theory method to identify the important test process components, and to observe how real‐life test organisations develop their testing activities. The results indicate that the test management at the project level is an important factor; the organisations do have sufficient test resources available, but they are not necessarily applied efficiently. In addition, organisations in general are reactive; they develop their process mainly to correct problems, not to enhance their efficiency or output quality. The results of this study allows organisations to have a better understanding of the test processes, and develop towards better practices and a culture of preventing problems, not reacting to them.

Delay reduction in courts of justice – possibilities and challenges of process improvement in professional public organizations

Delays in the justice system have been undermining the functioning and performance of the court system all over the world for decades. Despite the widespread concern about delays, the solutions have not kept up with the growth of the problem. The delay problem existing in the justice courts processes is a good example of the growing need and pressure in professional public organizations to start improving their business process performance.This study analyses the possibilities and challenges of process improvement in professional public organizations. The study is based on experiences gained in two longitudinal action research improvement projects conducted in two separate Finnish law instances; in the Helsinki Court of Appeal and in the Insurance Court. The thesis has two objectives. First objective is to study what kinds of factors in court system operations cause delays and unmanageable backlogs and how to reduce and prevent delays. Based on the lessons learned from the case projects the objective is to give new insights on the critical factors of process improvement conducted in professional public organizations. Four main areas and factors behind the delay problem is identified: 1) goal setting and performance measurement practices, 2) the process control system, 3) production and capacity planning procedures, and 4) process roles and responsibilities. The appropriate improvement solutions include tools to enhance project planning and scheduling and monitoring the agreed time-frames for different phases of the handling process and pending inventory. The study introduces the identified critical factors in different phases of process improvement work carried out in professional public organizations, the ways the critical factors can be incorporated to the different stages of the projects, and discusses the role of external facilitator in assisting process improvement work and in enhancing ownership towards the solutions and improvement. The study highlights the need to concentrate on the critical factors aiming to get the employees to challenge their existing ways of conducting work, analyze their own processes, and create procedures for diffusing the process improvement culture instead of merely concentrating of finding tools, techniques, and solutions appropriate for applications from the manufacturing sector

Assessing Organizational Cultural Fit prior to Integration in the M&A Process

Yritysostojen määrä on historiallisen suuri 2000-luvulla, vaikka melkein puolet niistä epäonnistuu. Aineettomilla tekijöillä, kuten organisaatiokulttuureilla, on keskeinen rooli yritysostojen onnistumisissa. Myös case yritys on aktiivinen yritysostoissa ja haluaa arvioida integraatioprosessinsa tehokkuutta. Siten diplomityön tarkoituksena on luoda työkalu organisaatiokulttuurien yhteensopivuuden arvioimiseksi, jotta ostopäätöksentekoa sekä integraation suunnittelua voitaisiin tukea paremmin yrityksessä. Diplomityö vastaakin kysymyksiin, kuten miten arvioida kulttuurista yhteensopivuutta ennen integraatiota integraatioprosessin parantamiseksi sekä mitkä ovat olleet kaikkein ongelmallisimmat ja toisaalta kaikkein menestyksekkäimmät kulttuuritekijät tutkitussa integraatiossa. Kulttuurisen yhteensopivuuden arviointi tulisi nähdä prosessina osana yrityskauppaa. Prosessin tulisi alkaa kulttuurisen integraation tavoitteiden määrittämisellä sekä organisaatiokulttuurin käsitteen ymmärtämisellä. Kulttuurianalyysi tulisi suorittaa työpajan avulla. Sen tulisi käsitellä ainakin yhdeksän kulttuurin osa-aluetta: innovatiivisuus, päätöksenteko, ihmissuuntautuneisuus, kommunikaatio, kontrolli, asiakassuuntautuneisuus, ajanhallinta, identifikaatio, sekä kollektivismi. Lisäksi kuhunkin dimensioon liittyvään kysymykseen tulisi vastata pisteillä yhdestä viiteen, jolloin voidaan piirtää kulttuurisen yhteensopivuuden kuvio. Tämän jälkeen johdon tulisi keskustella tuloksista vielä kerran tarkemmin ja lopulta koota tulokset kirjalliseksi raportiksi. Tutkitussa integraatiossa parhaiten integraatiota tukivat ihmissuuntautuneisuus sekä ajanhallinta (työn ja vapaa-ajan välinen tasapaino sekä tulevaisuus-suuntautuneisuus). Haasteellisimmat kulttuuritekijät koskivat päätöksentekoa, kommunikaatiota ja kontrollia, jotka vaikuttavat olevan tyypillisiä ongelmia ison yrityksen ostaessa pienemmän yrityksen.

Application of electrokinetic Fenton process for the remediation of soil contaminated with HCB

Electrokinetic remediation coupled with Fenton oxidation, widely called as Electrokinetic Fenton process is a potential soil remediation technique used for low permeable soil. The applicability of the process has been proved with soil contaminated with a wide range of organic compounds from phenol to the most recalcitrant ones such as PAHs and POPs. This thesis summarizes the major findings observed during an Electrokinetic Fenton Process study conducted for the remediation of low permeable soil contaminated with HCB, a typical hydrophobic organic contaminant. Model low permeable soil, kaolin, was artificially contaminated with HCB and subjected to Electrokinetic Fenton treatments in a series of laboratory scale batch experiments. The use of cyclodextrins as an enhancement agent to mobilize the sorbed contaminant through the system was investigated. Major process hindrances such as the oxidant availability and treatment duration were also addressed. The HCB degradation along with other parameters like soil pH, redox and cumulative catholyte flow were analyzed and monitored. The results of the experiments strengthen the existing knowledge on electrokinetic Fenton process as a promising technology for the treatment of soil contaminated with hydrophobic organic compounds. It has been demonstrated that HCB sorbed to kaolin can be degraded by the use of high concentrations of hydrogen peroxide during such processes. The overall system performances were observed to be influenced by the point and mode of oxidant delivery. Furthermore, the study contributes to new knowledge in shortening the treatment duration by adopting an electrode polarity reversal during the process.

Process approach in quality management - Case: ECO process development in EMS industry

The aim of the thesis was to study quality management with process approach and to find out how to utilize process management to improve quality. The operating environment of organizations has changed. Organizations are focusing on their core competences and networking with suppliers and customers to ensure more effective and efficient value creation for the end customer. Quality management is moving from inspection of the output to prevention of problems from occurring in the first place and management thinking is changing from functional approach to process approach. In the theoretical part of the thesis, it is studied how to define quality, how to achieve good quality, how to improve quality, and how to make sure the improvement goes on as never ending cycle. A selection of quality tools is introduced. Process approach to quality management is described and compared to functional approach, which is the traditional way to manage operations and quality. The customer focus is also studied, and it is presented, that to ensure long term customer commitment, organization needs to react to changing customer requirements and wishes by constantly improving the processes. In the experimental part the theories are tested in a process improvement business case. It is shown how to execute a process improvement project starting from defining the customer requirements, continuing to defining the process ownership, roles and responsibilities, boundaries, interfaces and the actual process activities. The control points and measures are determined for the process, as well as the feedback and corrective action process, to ensure continual improvement can be achieved and to enable verification that customer requirements are fulfilled.

The Forms and Functions of Multilingual Practices in Early Modern School Drama from the King‟s School, Canterbury

Käsittelen tutkimuksessani monikielisyyden ilmenemistä Canterburyn katedraalikoulun oppilaiden 1600-luvun loppupuoliskolla esittämissä näytelmissä, jotka löytyvät käsikirjoituksesta Lit.Ms.E41 (Canterburyn katedraalin arkisto). Tämä käsikirjoitus sisältää puheita ja näytelmiä, joiden kielinä ovat englanti, latina ja vähemmissä määrin myös kreikka. Useissa näytelmissä esiintyy koodinvaihtoa näiden kielten välillä, ja tutkielmassani selvitän, millaisia syntaktisia ilmenemismuotoja ja pragmaattisia merkityksiä koodinvaihdolla on. Teoreettinen viitekehykseni on yhdistelmä filologista ja lingvististä lähestymistapaa. Olen sisällyttänyt tutkielmaani aiemman koodinvaihdon tutkimuksen lisäksi Brownin ja Levinsonin kohteliaisuusteorian, jonka avulla erityisesti puhujien välisiin sosiaalisiin suhteisiin liittyviä koodinvaihdon funktioita voidaan luokitella. Koska historiallinen koodinvaihto on tutkimusaiheena vielä melko tuore, käsittelen perusteellisesti erilaisia metodologisia ratkaisuja. Valitsemani metodi yhdistää perinteisen filologisen lähiluvun pragmaattiseen analyysiin, jonka kautta työssäni vaikuttavat muun muassa rationaalisuuden ja empatian käsitteet. Analyysini perusteella kävi ilmi, että erityisen yleinen koodinvaihdon funktio on mahdollistaa intertekstuaalisuus, jolla edelleen voidaan ilmaista esimerkiksi solidaarisuutta eli sosiaalista läheisyyttä tai loukata puhuteltavaa. Solidaarisuus oli myös ilman intertekstuaalisuutta yleinen koodinvaihdon funktio. Näiden lisäksi koodinvaihdon funktioita olivat muun muassa kasvoja uhkaavat teot, eufemismit, stilistiset efektit sekä diskurssin avustaminen. Syntaktisten ilmenemismuotojen osalta keskeisin havainto oli, että koodinvaihdon ja lainaamisen erottaminen ei ole tarpeellista tai edes kannattavaa kaikissa tilanteissa. Lisäksi voitiin todeta, että valittu metodi soveltui hyvin aineiston analysoimiseen, ja sitä tulisi soveltaa mahdollisuuksien mukaan laajempaan materiaaliin sekä muiden pragmaattisten ilmiöiden tutkimiseen.

Modelling of calciner in post-combustion carbon capture process

Climate change has given an impetus to research and developed new technologies to reduce significantly carbon dioxide emissions in energy production in the developed countries. The major pollution source, fossil fuels, will be used as an energy source for many decades, which provides the demand for carbon capture and storage technologies. Over recent years many new technologies has been developed and one of the most promising is calcium-looping in post-combustion carbon capture process, which use carbonation-calcination cycle to capture carbon dioxide from the flue gas of a combustion process. First pilot plant for calcium-looping process has been built in Oviedo, Spain. In this study, a three-dimensional model has been created for the calciner, which is one of the two fluidized bed reactors needed for the process. The calciner is a regenerator where the captured carbon dioxide is removed from the calcium material and then collected after the reactor. Thesis concentrates in creating the calciner 3D-model frame with CFB3D-program and testing the model with two different example cases. Used input parameters and calciner geometry are Oviedo pilot plant design parameters. The calculation results give information about the process and show that pilot plant calciner should perform as planned. This Master’s Thesis is done in participation to EU FP7 project CaOling.

Earnings management in the process of preparing corporate financial reports

Earnings management (EM) literature examines managers’ use of judgment in financial reporting and in structuring transactions to alter financial reports for a specific reason. Mainstream EM literature strongly concentrates on statistical research methodologies and it is driven by positive accounting theory. Although EM occurs in the process of preparing corporate financial reports, that process has so far largely remained a “black box” in prior literature. The purpose of this study is to analyze what EM is, how and why it unfolds and how it is intertwined in the process of preparing corporate financial reports. In order to meet the needs of the study, a qualitative case study method will be used. The contribution of this study is threefold. First, it indicates that the concept of EM is not as unam-biguous as the prior literature has assumed. I find that EM is socially constructed and more open to interpretation than absolutely dichotomous conception given by previous studies. Second, this study contributes to our knowledge of the role and the importance of actors involved in conducting EM, indicating that EM is much more actor-dependent than the prior literature has assumed. Third, this study broadens our knowledge base with regard to the processes and potential for EM in academic research.