Innovative Culture – Searching for Innovativeness in a Construction Company

The purpose of the thesis is to study innovativeness in a context of the construction industry especially the front-end of the innovation process. The construction industry is often considered an old-fashioned manufacturing industry. Innovations and innovativeness are rarely linked to the industry. The construction industry, as well as other industries in Finland, is facing challenges such as productivity, the climate change and internationalization. The meaning of innovations is greater than ever in continuously changing markets, for standing out from competitors or increasing the competitiveness. Traditional production methods, tight building regulations, unique buildings, one-of-a-kind project organizations and highlighting the cheapest price in building contracts are particular challenges in the construction industry. The research questions of the thesis were: - What kind of factors shift the existing company culture towards innovativeness? - What are the phases of the front-end of the innovation process? - What kind of tools and methods enable managing the front-end of the innovation process? The theoretical part of the thesis bases on the literature review. The research methodology of the empirical part was the action research and qualitative approach. Empirical data was collected by the theme interviews from three companies. The results were practical methods and experiences from innovation activities of the companies. The results of the thesis can be clarified as follows: enhancement of the innovation activities requires support and commitment of the top management, innovative culture and innovation strategy. Innovativeness can be promoted by systematical methods for example collecting ideas from employees. Controlling and managing the front-end phase is essential to succeeding. Despite that managing the front-end is the most challenging part of the innovation process, development and management of that save companies’ money, resources and prevents useless investments. Further clarification and studies are needed to find out furthermore functional tools and methods to manage innovations and implementing them to the culture of the companies.

Developing the Sourcing with the Purchasing Tool in the Chemical Company

The aim of this research was to investigate Tikkurila Oyj's Vantaa factories' current status in procurement and to develop the reporting of purchases and purchase warehouses, and to measure the activities during the implementation of the new purchasing tool. The implemented purchasing tool was based on ABC-analysis. Based on its reports the importance of performance measurements for the operations of the company, and the purpose of getting transparency to the company's supply chain on the part of purchasing were examined. A successful purchase- and material operation calls for accurate knowledge and professional skills. The research proved that with a separate purchasing tool, that analyses the existing information of the company's production management system, it is possible to get added value to whole supply chain's needs. The analyses and reports of the purchasing tool enable a more harmonized purchasing process at the operative level, and create a basis for internal targets and to their follow-up. At the same time the analyses clarify the current status and development trends of procurement fresh to the management. The increase of the possibilities of exploitation of information technology enables a perfect transparency to the case company's purchase department.

Kuka suunnittelee mainokset? Tutkimus mainosalan kulisseista,yhteistyökäytännöistä ja ristiriidoista. Mainonnan suunnittelijan näkökulma

Tutkimus kuvaa tapahtumia mainonnan suunnittelun kulissien takana ja niiden vaikutusta suunnittelutyöhön mainonnan suunnittelijan näkökulmasta. Lähestymistapa on systeemiteoreettinen: tutkimuksessa tarkastellaan sekä mainostoimiston suunnittelijoiden, projektijohtajien ja muiden mainonnan suunnitteluun osallistuvien keskinäistä vuorovaikutusta että mainostoimiston ja mainoksia tilaavan asiakkaan vuorovaikutuksen asettamia rajoja ja mahdollisuuksia. Keskeinen työväline on Kurt Lewinin kentän käsite. Tutkimuksessa se konkretisoituu esitystavaksi mainonnan suunnittelun olennaisista piirteistä, jotka ovat toisistaan riippuvaisia. Tutkimusta pohjustaa ajatus mainonnan suunnittelun perusrakenteesta, joka on riippumaton taloudellisista, yhteiskunnallisista tai mainostoimialan liiketoimintaympäristön muutoksista. Mainostoimistossa työtä tehdään usein ryhmässä. Ydinryhmä muodostuu kirjoittavan ja visuaalisen suunnittelijan työparista, mutta projektijohtaja on avainasemassa hoitaessaan yhteydenpitoa mainostoimiston asiakkaaseen. Tutkimustyötä viitoittivat kysymykset mainonnan suunnittelijoiden tehtävästä ja asemasta, työssä koetuista haasteista sekä osuudesta ja vastuusta lopullisissa töissä. Keskiössä ovat suunnittelutyötä raamittavat haasteet, jotka ohjaavat suunnittelijoiden kykyjä ja haluja toteuttaa luovuuttaan. Tutkimus ammentaa teoreettisia aineksia työnjaon ja tiimityön käsitteiden ohella vallan tilanteisuudesta ja suhteista sekä sosiaalisen pääoman ja luottamuksen moniaineksisuudesta. Tutkimuksen aineisto kerättiin syksyllä 2008 ja alkuvuodesta 2009 haastattelemalla suomalaisten mainostoimistojen suunnittelijoita. Haastatteluaineisto koostuu kymmenestä ryhmähaastattelusta, johon kuhunkin osallistui 3–4 suunnittelijaa. Muu aineisto sisältää toimialan tilastoja ja julkaisuja sekä yksityisiä sähköpostikirjeenvaihtoja ja keskusteluja mainosammattilaisten kanssa. Haastatteluaineisto analysoitiin Milesin ja Hubermannin aineistolähtöisen sisällönanalyysin avulla ja sitä täydennettiin retorisella diskurssianalyysilla. Analyysin alkuvaiheessa koemetodina sovellettiin Straussin ja Corbinin aineistolähtöisen teorian (grounded theory) kolmivaiheista koodausta. Tutkimuksen tuloksena on malli mainonnan suunnittelun kentän jännitteistä, jotka johtavat toimimaan tietyllä tavalla. Mainonnan suunnittelijan tehtävinä näyttäytyvät vaikuttaminen, asiakkaan tarpeiden tunnistaminen ja tyydyttäminen sekä omakohtainen menestyminen. Suunnittelijan asema näyttää työssä koettujen haasteiden kautta häilyvän asiantuntijuuden ja alihankkijuuden välimaastossa. Työn henkilökohtaisina haasteina piirtyvät tarmokkuuden ja jatkuvan oivaltamisen vaateet. Ulkoisina tekijöinä talouden, teknologian ja sen myötä median murros sekä haastaa että kehittää: alituiseen kiireeseen näytetään verhoavan pulmia, joiden todellinen alkuperä paikantuu muualle. Keskeiset ristiriidat ja toiminnan edellytykset ilmenevät juuri yhteistyössä: mainostoimiston sisäinen yhteistyö ja asiakkaan antama palaute ovat merkittäviä tekijöitä luottamuksen taustalla. Siten avoin ja vastavuoroinen kommunikaatio piirtyy olennaiseksi asetettujen tavoitteiden saavuttamisessa ja asiakkaan menestymisessä. Mainonnan suunnittelussa tärkeäksi kysymykseksi nousevat portinvartijoiden roolit. Mainostoimiston sisäisessä työskentelyssä projektijohtajat hallinnoivat suunnitteluresursseja, välittävät tietoa asiak kaalta suunnittelijalle ja päinvastoin sekä tekevät tärkeimmät päätökset. Asiakkaan puolella mainoksia tilaava asiakashenkilö hallinnoi valjastamiaan resursseja, mutta varsinainen päätöksenteko tapahtuu tämän esimiehen toimesta. Tulosten valossa on perusteltua uskoa, että mainonnan suunnittelijat kokevat oman työnsä arvon alentuneen ja päätösvaltansa vähentyneen. Mainostoimialan murroksen kannalta tutkimus tuo esiin uudenlaisen tiimityön ymmärtämisen ja korostaa yksilöiden vahvuuksien tunnistamisen merkitystä. Kiristyvässä taloudessa se suuntaa huomion sekä mainostoimistojen että niiden asiakasyritysten sisäisten ja ulkoisten resurssien tehokkaaseen ja tuottavaan hyödyntämiseen ja organisoimiseen. Sosiologisesti tutkimus tarjoaa yhdenlaisen näkökulman ryhmätyön ulottuvuuksiin ja työelämän yhteistyöhaasteiden pohtimiseen. Siten tutkimuksen tuloksilla voi nähdä arvoa myös muiden kuin mainosalan yhteistyökäytäntöjentarkasteluun.

Strategic Orientation of Knowledge Management: Influence on Company's Performance

Nowadays, the huge part of the most important research is done in the area of interaction of two or more fields of research. They open doors for new ideas and help to find that was not possible to find before, explain simple things, which was missed because of narrow vision. This research investigates the interconnection of strategy study and knowledge management. Well-known researches (e.g. Michael Zack, 2003) point out that organization should align its' knowledge management to strategy to gain success. But this is not well developed area yet. This research contributes to the growing knowledge of knowledge management - strategy alignment. The research tests the relation between strategic orientation of knowledge management and performance of the company. It also investigates the nature of strategy typology influence on strategic orientation of knowledge management. These two points have critical importance for development of this area. Moreover, it has management implication for those practitioners, who cares about sustainable success of their company based on knowledge.

Electric propulsion system in a modern sports car

In this thesis an electric propulsion system is designed on a device level using Cadence ORCAD. The vehicle belongs to the Helsinki Metropolia University of Applied Sci-ences and it is to compete in the Automotive X-Prize competition held in the USA. In this thesis the electric propulsion system and related electric safety measures are designed. Also electro-magnetic compatibility and interferences present in the system are examined by examining the birth mechanisms and transmission paths of interference. Per device effects of interference and solutions to minimize them were examined and proposed. Suitability of permanent magnet synchronous machines for passenger vehicle use was examined by examining the torque production capability of the motor and the torque requirements of the vehicle. Also a short overview of history of electric vehicles is given.

Software Licensing: Implementing Electronic Licensing in Medical Technology Company

The purpose of this thesis is to examine software licensing, how a software developer can benefit from it and to define specifications for licensing system of software based medical technology product. The thesis has been divided into theoretical and empirical parts. In the theoretical part the concept of software licensing and different aspects that are connected to it are examined with a help of research material. On the ground of this research, in the empirical part, a licensing system for a medical software product called iCentral is designed. The empirical part is based on interviews, questionnaire and on authors own experience gained while working for the case-company.The thesis has great practical importance for the case-company by proposing both an ideal, and more importantly, practical implementation for a licensing system of a product. Thesis shows that electronic licensing is a viable option to sell medical technology products without a need to revise existing procedures or the enterprise resource system in the case company.

Electric field measurements using scanning electron microscope

The main idea of this diploma work is to study electric field distribution on the micro level. For this purpose a silicon edgeless detector was chosen as the object of investigation and scanning electron microscope as an investigation tool. Silicon edgeless detector is an important part of installation for studying proton-proton interactions in TOTEM experiment at Large Hadron Collider. For measurement of electric field distribution inside scanning electron microscope a voltage contrast method was applied.

Utilization of a Time Domain Simulator in the Technical and Economic Analysis of a Wind Turbine Electric Drive Train

The amount of installed wind power has been growing exponentially during the past ten years. As wind turbines have become a significant source of electrical energy, the interactions between the turbines and the electric power network need to be studied more thoroughly than before. Especially, the behavior of the turbines in fault situations is of prime importance; simply disconnecting all wind turbines from the network during a voltage drop is no longer acceptable, since this would contribute to a total network collapse. These requirements have been a contributor to the increased role of simulations in the study and design of the electric drive train of a wind turbine. When planning a wind power investment, the selection of the site and the turbine are crucial for the economic feasibility of the installation. Economic feasibility, on the other hand, is the factor that determines whether or not investment in wind power will continue, contributing to green electricity production and reduction of emissions. In the selection of the installation site and the turbine (siting and site matching), the properties of the electric drive train of the planned turbine have so far been generally not been taken into account. Additionally, although the loss minimization of some of the individual components of the drive train has been studied, the drive train as a whole has received less attention. Furthermore, as a wind turbine will typically operate at a power level lower than the nominal most of the time, efficiency analysis in the nominal operating point is not sufficient. This doctoral dissertation attempts to combine the two aforementioned areas of interest by studying the applicability of time domain simulations in the analysis of the economicfeasibility of a wind turbine. The utilization of a general-purpose time domain simulator, otherwise applied to the study of network interactions and control systems, in the economic analysis of the wind energy conversion system is studied. The main benefits of the simulation-based method over traditional methods based on analytic calculation of losses include the ability to reuse and recombine existing models, the ability to analyze interactions between the components and subsystems in the electric drive train (something which is impossible when considering different subsystems as independent blocks, as is commonly done in theanalytical calculation of efficiencies), the ability to analyze in a rather straightforward manner the effect of selections other than physical components, for example control algorithms, and the ability to verify assumptions of the effects of a particular design change on the efficiency of the whole system. Based on the work, it can be concluded that differences between two configurations can be seen in the economic performance with only minor modifications to the simulation models used in the network interaction and control method study. This eliminates the need ofdeveloping analytic expressions for losses and enables the study of the system as a whole instead of modeling it as series connection of independent blocks with no lossinterdependencies. Three example cases (site matching, component selection, control principle selection) are provided to illustrate the usage of the approach and analyze its performance.

Production planning development in global manufacturing company

Larox Corporation is a provider of full service filtration in solid and liquid separation. Larox develops, designs, manufactures and supplies industrial filters. By Larox’s continuous development principle, a project for more efficient production was started. At the same time production planning was taken under review. Aim for this Master’s thesis was to find software designed for production planning purposes replacement for old Microsoft Excel based method. In this Master’s thesis current way of production planning was thoroughly analyzed and improvement targets were specified and also requirements for new software were assigned. Primary requirements for new software were possibility to production scheduling, planning, follow-up and also for long-time capacity planning and tracking. Also one demand was that new software should have data link to Larox’s current ERP-system. Result of this Master’s thesis was to start using Larox’s ERP-system also for production planning purposes. New mode of operation fulfils all requirements which were placed to new system. By using new method of production planning, production planners can get more easier and reliable data than from current system.

Utilizing online demand generation in an engineering company

Työn tarkoituksena on selvittää miten sähköistä kysynnän herättämistä voidaan hyödyntää Mantsinen Group Ltd Oy:ssä siten, että sillä pystytään tukemaan myyntiä. Lisäksi sähköisen kysynnän herättämisen tehokkuutta tutkitaan, jotta saadaan selville onko se kannattavaa ja kuinka hyvin se sopii yritykselle. Kysynnän herättämisjärjestelmän käyttö on määritelty kirjallisuuteen perustuen ja sen jälkeen järjestelmän käyttö on aloitettu. Sähköisen kysynnän herättämisen tehokkuus mitataan kolmen kuukauden tarkastelujakson todellisella datalla. Sähköisen kysynnän herättämisen sopivuutta arvioidaan perustuen sen kustannustehokkuuteen ja tuloksiin. Työn tulokset osoittavat, että sähköinen kysynnän herättäminen on kannattavaa ja se sopii yritykselle. Sillä voidaan parhaiten tukea myyntiä järjestelmän tuottaessa laadukkaita myyntimahdollisuuksia tasaisena virtana myynnille. Myös aiemmin manuaalisesti tehtyjä työtehtäviä voidaan automatisoida ja näin vähentää myyjien työtaakkaa.

Traffic flow development at North European company level with respect of China and Russia

The aim of the thesis is to analyze traffic flows and its development from North European companies` point of view to China and Russia using data from logistics questionnaire. Selected North European companies are large Finnish and Swedish companies. The questionnaire was sent via email to the target group. The study is based on the answers got from respondent companies from years 2006, 2009 and 2010. In the thesis Finnish Talouselämä newspaper and Swedish Affärsdata are used as a database to find the target companies for the survey. Respondents were most often logistics managers in companies. In the beginning of the thesis concepts of transportation logistics is presented, including container types, trade terms, axel loads in roads and in railways. Also there is information about warehousing types and terminals. After that, general information of Chinese and Russian transportation logistics is presented. Chinese and Russian issues are discussed in two sections. In both of them it is analyzed economic development, freight transport and trade balance. Some practical examples of factory inaugurations in China and Russia are presented that Finnish and Swedish companies have completed. In freight transport section different transportation modes, logistics outsourcing and problems of transportation logistics is discussed. The results of the thesis show that transportation flows between Europe and China is changing. Freight traffic from China to European countries will strengthen even more from the current base. When it comes to Russia and Europe, traffic flows seem to be changing from eastbound traffic to westbound traffic. It means that in the future it is expected more freight traffic from Russia to Europe. Some probable reasons for that are recent factory establishments in Russia and company interviews support also this observation. Effects of the economic recession are mainly seen in the lower transportation amounts in 2009.

Developing the service offering of an industrial company

The purpose of this thesis was to determine, what kind of service offering the case company should provide to its customers in the Australian market. For this, a model for analysing the competitive environment was developed. In the model, three players were considered: customers, competitors and the case company. Benchmarking was used in identifying competitors’ offerings currently available in the market. Experts inside the case company were consulted for determining the customer need. The competitors’ offerings were analysed on the basis of Pekkarinen et al.’s (2009) framework, dividing the offerings to services supporting the supplier’s product (SSP), supporting the client (SSC), supporting the client’s network (SSN), supporting mutual actions (SSM) and benefit and risk sharing elements. After this, they were compared to the competitive environment in order to identify areas where the case company can differentiate itself from its competitors in the Australian market. On the basis of the company’s key success factors, and the Finnish service concept currently in use, some additional offerings were suggested for the case company in order to further outperform its competitors in the market. Finally, on the basis of the suggested offerings and competitors’ offerings, a service concept was suggested for the case company to introduce in the Australian market.

Internationalization of an SME through FDI as mode of entry - Case Real Estate Company

This study examines international entry of an SME to Brazil using foreign direct investment as a mode of entry. The case company discussed is a small real estate investment company that has operated in Finland and has recently internationalized to Brazil. The work examines how does an SME internationalize, what entry mode is advisable to use and it gives a brief insight of the Brazilian market today.

Creating a Performance Measurement System for Accounting Services of Large Paper Company

The main objective of this research is creating a performance measurement system for accounting services of a large paper industry company. In this thesis there are compared different performance measurement system and then selected two systems, which are presented and compared more detailed. Performance Prism system is the used framework in this research. Performance Prism using success maps to determining objectives. Model‟s target areas are divided into five groups: stakeholder satisfaction, stakeholder contribution, strategy, processes and capabilities. The measurement system creation began by identifying stakeholders and defining their objectives. Based on the objectives are created success map. Measures are created based on the objectives and success map. Then is defined needed data for measures. In the final measurement system, there are total just over 40 measures. Each measure is defined specific target level and ownership. Number of measures is fairly large, but this is the first version of the measurement system, so the amount is acceptable.