Success factors of customer and supplier master data system

Especially in global enterprises, key data is fragmented in multiple Enterprise Resource Planning (ERP) systems. Thus the data is inconsistent, fragmented and redundant across the various systems. Master Data Management (MDM) is a concept, which creates cross-references between customers, suppliers and business units, and enables corporate hierarchies and structures. The overall goal for MDM is the ability to create an enterprise-wide consistent data model, which enables analyzing and reporting customer and supplier data. The goal of the study was defining the properties and success factors of a master data system. The theoretical background was based on literature and the case consisted of enterprise specific needs and demands. The theoretical part presents the concept, background, and principles of MDM and then the phases of system planning and implementation project. Case consists of background, definition of as is situation, definition of project, evaluation criterions and concludes the key results of the thesis. In the end chapter Conclusions combines common principles with the results of the case. The case part ended up dividing important factors of the system in success factors, technical requirements and business benefits. To clarify the project and find funding for the project, business benefits have to be defined and the realization has to be monitored. The thesis found out six success factors for the MDM system: Well defined business case, data management and monitoring, data models and structures defined and maintained, customer and supplier data governance, delivery and quality, commitment, and continuous communication with business. Technical requirements emerged several times during the thesis and therefore those can’t be ignored in the project. Conclusions chapter goes through these factors on a general level. The success factors and technical requirements are related to the essentials of MDM: Governance, Action and Quality. This chapter could be used as guidance in a master data management project.

Sovellusintegraation toteutus pk-yrityksen projektijärjestelmiin

Tässä diplomityössä käydään läpi lähestymistapoja sovellusintegraatioon ja niiden käyttöä yritysmaailmassa. Sovellusintegraatiolla tarkoitetaan prosessia jolla yhdistetään toimintoja tai tietoa kahdesta tai useammasta sovelluksesta ja luodaan yhtenäinen kokonaisuus toiminnallisuuksia tai tietoa. Sovellusintegraation toteuttamiseksi on olemassa erilaisia lähestymistapoja ja menetelmiä. Näillä prosesseilla pyritään linkittämään kaksi tai useampia sovelluksia toisiinsa. Sovellusintegraation avulla saadaan jo olemassa olevista järjestelmistä tietoa, pystytään hyödyntämään elektronista kaupankäyntiä, saadaan integroituja toimitusketjuja, ja saadaan jaettua tarpeelliset prosessit. Sovellusintegraatio on strateginen lähestymistapa monen tietojärjestelmän yhteensitomiseksi. Tietojen vaihto ja reaaliaikainen toiminta on tärkeää. Sovellusintegraation tuloksena käytettävissä oleva informaatio ja prosessit sisäisten- ja ulkoisten systeemien välillä tuottavat selkeää strategista etua. Työssä toteutettiin kohdeyritykselle järjestelmä jonka avulla voidaan siirtää työtunnit projektinhallintajärjestelmästä taloushallinnon järjestelmään.

Suunnittelukapasiteettien seurantamallin kehittäminen

The first main objective of this study was to develop a planning capacity management model for a chocolate and confectionary company in Finland. The second objective was to analyze how capacity updates would affect cost accounting practices. In addition, a creation of an update and maintenance process of planning capacities was determined as a sub-objective of developing the capacity management model. The thesis was started with analyzing the needs, requirements and constraints of the capacity management model and model’s connection with cost accounting. This was done by interviewing key officials like production planners, managers and controllers. A thorough literature review was also done at an early phase. Furthermore, internal systems and software architecture got to be acquainted with. The model was constructed as an Excel-based platform which will get its input data from Enterprise Resource Planning system and Production Performance Measurement system. The main purpose of the planning capacity management model is to make sure that the production planners can utilize more precise parameters but it also offers tools for the production managers to assess production performance and effectiveness at the product level. In addition to production planning, planning capacities are also tightly involved with cost accounting as many direct and indirect costs are allocated to the products utilizing planning capacities. For this reason, the linkage between product costing and capacity is also diversely examined in the thesis. Development suggestions conclude the report by giving some guidelines for more precise and consistent production planning and cost accounting between the factories.

Information integration and its impacts on logistics performance - Using information technology and systems to facilitate information integration

Fast changing environment sets pressure on firms to share large amount of information with their customers and suppliers. The terms information integration and information sharing are essential for facilitating a smooth flow of information throughout the supply chain, and the terms are used interchangeably in research literature. By integrating and sharing information, firms want to improve their logistics performance. Firms share information with their suppliers and customers by using traditional communication methods (telephone, fax, Email, written and face-to-face contacts) and by using advanced or modern communication methods such as electronic data interchange (EDI), enterprise resource planning (ERP), web-based procurement systems, electronic trading systems and web portals. Adopting new ways of using IT is one important resource for staying competitive on the rapidly changing market (Saeed et al. 2005, 387), and an information system that provides people the information they need for performing their work, will support company performance (Boddy et al. 2005, 26). The purpose of this research has been to test and understand the relationship between information integration with key suppliers and/or customers and a firm’s logistics performance, especially when information technology (IT) and information systems (IS) are used for integrating information. Quantitative and qualitative research methods have been used to perform the research. Special attention has been paid to the scope, level and direction of information integration (Van Donk & van der Vaart 2005a). In addition, the four elements of integration (Jahre & Fabbe-Costes 2008) are closely tied to the frame of reference. The elements are integration of flows, integration of processes and activities, integration of information technologies and systems and integration of actors. The study found that information integration has a low positive relationship to operational performance and a medium positive relationship to strategic performance. The potential performance improvements found in this study vary from efficiency, delivery and quality improvements (operational) to profit, profitability or customer satisfaction improvements (strategic). The results indicate that although information integration has an impact on a firm’s logistics performance, all performance improvements have not been achieved. This study also found that the use of IT and IS have a mediocre positive relationship to information integration. Almost all case companies agreed on that the use of IT and IS could facilitate information integration and improve their logistics performance. The case companies felt that an implementation of a web portal or a data bank would benefit them - enhance their performance and increase information integration.

Tiedonjaon ongelmat globaalissa jakeluketjussa

Työ on kirjallisuustutkimus ja sen tavoitteena on määrittää globaalin jakeluketjun tiedonjaon ongelmat sekä niiden ratkaisu- ja ehkäisymenetelmiä. Työ sisältää seitsemän eri ongelmatyyppiä, joihin löydettiin kolme ratkaisumenetelmää ja kolme ehkäisymenetelmää. Lisäksi työssä käsitellään ongelmia case-yrityksen näkökulmasta. Case-esimerkki toteutettiin haastatteluna. Tiedonjaon ongelmat johtuvat joko inhimillisistä tai teknisistä virheistä. Vakavimmat ongelmat johtuvat usein inhimillisistä syistä eikä tietojärjestelmän uusiminen välttämättä korjaa näitä ongelmia. Tietojärjestelmien oikeaoppinen käyttöönotto ja sisäistäminen antavat yritykselle huomattavia parannuksia tiedonjakoon jakeluketjussa. Tiedonjaon ongelmia ratkaistaessa täytyy usein hyödyntää useampia ratkaisumenetelmiä ja yrityksen liiketoimintamalli täytyy ottaa huomioon. Case-yrityksessä vakavimmat ongelmat liittyivät luottamukseen, kommunikointietiketin puutteeseen, tiedon hukkumiseen ja odottamattomiin tiedonkulun häiriöihin.

Maintaining supply performance during an ERP system implementation phase : case Cloetta Suomi Oy

Implementing an enterprise resource planning (ERP) system often means a major change to an organization and involves significant risks. It is typical that many of the ERP system implementations fail resulting in tremendous damage to the business. Moreover, running normal business operations during an ERP system implementation is far more complicated than normally. This thesis focuses on how an organization should manage the ERP system implementation process in order to maintain supply performance during the implementation phase. The theoretical framework in this thesis focuses on ERP system implementations with a critical success factor approach. Critical success factors can be divided into strategic and tactical level success factors. By considering these critical success factors, ERP system implementation project’s timeline and best practices of an ERP implementation, a critical success factor based ERP system implementation management framework is presented. The framework can be used as a theoretical framework when the goal is to avoid ERP system implementation phase issues that are driven by the ERP system implementation project and that may decrease organization’s supply performance. This thesis is a case study that was written on an assignment to a confectionary company Cloetta Suomi Oy. In order to collect data, interviews of the case company personnel were conducted. In addition, several other data collection methods were used throughout the research process. These data collection methods include examination of presentations and archival records as well as direct observations in case company meetings and in various work duties. The results of this thesis indicate that there are several factors that may decrease organization’s supply performance during the ERP system implementation. These issues are categorized under external and internal issues and further into six risk drivers that are suppliers, customers, products, staff, information systems and other projects. After the description and categorization of each issue, the thesis focuses on finding solutions on how to avoid or mitigate the impact of these issues on the organization’s supply performance. This examination leads to several operational activities that are also practical to business practitioners. It is also stated that a successful ERP system implementation that also causes minimal disturbance to organization’s supply performance during the ERP system implementation, is achieved by considering three levels of actions.

Accounting for competition, governance and accountability during institutional change in not-for-profit and public sector organisations

Purpose The aim of this thesis1 is to analyse theoretically how institutionalisation of competitive tendering2, governance and budgetary policies cannot be taken for granted to lead to accountability among institutional actors3. The nature of an institutionalised management accounting policy, its relevance as a source of power in organisational decision making, and in negotiating inter-organisational relationships, are also analysed. Practical motivation The practical motivation of the thesis is to show how practitioners and policy makers can institutionalise changes which improve the power of management accounting and control systems4 as a mechanism of accountability among institutional actors and in negotiating relationships with other organisations. Theoretical motivation and conceptual approach The theoretical motivation of the thesis is to extend the institutional framework of management accounting change proposed by Burns and Scapens (2000) by using the theories of critical realism, communicative action, negotiated order and the framework of circuits of power. The Burns and Scapens framework needs further theorisation to analyse the relationship between the institutionalisation of management accounting and accountability; and the relevance of management accounting information in negotiating in inter-organisational relationships. Methodology and field studies Field research took place in public and not-for-profit health care organisations and a municipality in Finland from 2008 to 2013. Data were gathered by document analysis, interviews, participation in meetings and observations. Findings The findings are explained in four different essays that show that institutionalisation of competitive tendering, governance and budgetary policies cannot be taken for granted to lead to accountability among institutional actors. The ways by which institutional actors think and act can be influenced by other institutional mechanisms, such as inter-organisational circuits of power and intraorganisational governance policies, independent of the institutional change process. The relevance of institutionalised management accounting policies in negotiating relationships between two or more organisations depends on processes and contexts through which institutional actors use management accounting information as a tool of communication, mutual understanding and power. Research limitations / implications The theoretical framework used can be applied validly in other studies. The empirical findings cannot be generalised directly to other organisations than the organisations analysed. Practical implications Competitive tendering and budgetary policies can be institutionalised to shape actions of institutional actors within an organisation. To lead to accountability, practitioners and policy makers should implement governance policies that increase the use of management accounting information in institutional actors’ thinking, actions and responsibility for their actions. To reach a negotiated order between organisations, institutionalised management accounting policies should be used as one of the tools of communication aiming to reach mutual agreement among institutional actors.

Elintarviketehtaan tuotantolinjan kunnonvalvonnan kehittäminen

Tutkimuksen tavoitteena oli kunnonvalvontajärjestelmän kehittäminen nykyaikaiselle elintarviketeollisuuden tuotantolinjalle. Työssä etsittiin olemassa olevia kunnonvalvontamenetelmiä ja -sovelluksia erityisesti jäätelötuotantolaitteiden tarpeisiin. Kirjallisuudesta löydettiin sovelluksia lähinnä yksittäisille komponenteille ja kone-elimille. Tutkimuksen kohteena oleva tuotantolinja käytiin läpi toimintojen ja komponenttien osalta. Tehtaan laitekantaa ja valmiutta kunnonvalvonnan käyttöönotolle käsiteltiin yleisellä tasolla. Kunnonvalvontajärjestelmää kehitettäessä käytettiin hyväksi kirjallisuudesta löytyneitä menetelmiä, joista soveltuvimpia käytettiin kunnonvalvontametodien kartoittamiseen. Kunnonvalvontametodit muodostettiin toiminnanohjausjärjestelmästä ja linjan käyttöönotosta saatujen tietojen avulla. Tietoja käytettiin vika-vaikutusanalyysissä, joka oli pohjana komponentti- ja menetelmäkohtaisessa analyysissa. Kriittisiä ja tuotannon tehokkuuteen vaikuttavia koneenosia ja kokonaisuuksia tarkasteltiin kunnonvalvontamenetelmien soveltuvuuden avulla. Tutkimuksen edetessä kehitettiin kokonaisvaltaiset toiminnanohjausjärjestelmän avulla toimivat eritasoiset kunnonvalvontahypoteesit, joiden avulla linjan yksittäisten komponenttien kuntoa voidaan valvoa. Lisäksi tutkimuksessa kehitettiin uusia kunnonvalvontasovelluksia, joita on mahdollista käyttää myös tehtaan muilla linjoilla. Kunnonvalvontahypoteeseja käytettiin kokonaisen kunnonvalvontajärjestelmän luomiseen. Tehtaalla on mahdollisuus valita käyttöönotettavan kunnonvalvonnan taso hypoteesien sekä kunnossapitostrategian avulla.

Mitigating uncertainty in logistics outsourcing with ERP systems

Outsourcing is a common strategy for companies looking for cost savings and improvements in performance. This has been especially prevalent in logistics, where warehousing and transporting are typical targets for outsourcing. However, while the benefits from logistics outsourcing are clear on paper, there are several cases companies fail to reach these benefits. The most commonly cited reasons for this are poor information flow between the company and the third party logistics partner, and a lack of integration between the two partners. Uncertainty stems from lack of information, and it can cripple the whole outsourcing operation. This is where enterprise resource planning (ERP) systems step in, as they can have a significant role in improving the flow of information, and integration, which consequently mitigates uncertainty. The purpose of the study is to examine if ERP systems have an effect on a company's decision to outsource logistics operations. Along the rapid advancements in technology during the past decades, ERP systems have also evolved. Therefore, empirical research on the subject needs constant revision as it can quickly become outdated due to ERP systems having more advanced capabilities every year. The research was conducted using a qualitative single-case study of a Finnish manufacturing firm that had outsourced warehousing and transportation operations in the Swedish market. The empirical data was gathered with use of semi-structured interviews with three employees from the case company that were closely related to the outsourcing operation. The theoretical framework that was used to analyze the empirical data was based on Transaction Cost Economics theory. The results of the study were align with the theoretical framework, in that the ERP system of the case company was seen as an enabler for their logistics outsourcing operation. However, the full theoretical benefits from ERP systems concerning extended enterprise functionality and flexibility were not attained due to the case company having an older version of their ERP system. This emphasizes the importance of having up-to-date technology if you want to overcome the shortcomings of ERP systems in outsourcing situations.

Non-profit maximising organisations and the impact of privatisation, liberalisation, and public-sector reform

I denna avhandling analyserar jag både offentliga och privata företag och organisationer, inklusive universitet, särskilt när det existerar potentiell inre motivation. Jag behandlar både industriell produktion, inklusive infrastruktursektorer med vertikala relationer, och tjänstesektorn. Man tänker sig att ägandet kan påverka kostnadseffektiviteten dels genom olika storlek hos lönetillägg och andra förmåner för de anställda (eng. Internal Rent Capture), och dels via asymmetrisk information. Jag frågar dessutom om det finns andra faktorer än ägande och konkurrens som kan påverka prestandan hos kommersiella företag och ideella organisationer. Dessa frågeställningar aktualiseras av pågående reformer inom den offentliga sektorn, särskilt i samband med den så kallade nya offentliga förvaltningen (eng. New Public Management). Jag analyserar reformernas inverkan på hur bra en organisation fungerar och på den sociala välfärden. Analysen i denna avhandling är teoretisk, men resultaten är relaterade också till den empiriska litteraturen. Avhandlingen är uppdelad i del I och II. I del I sammanfattar jag avhandlingen och sätter den i ett sammanhang, medan del II består av fem redan publicerade essäer. De två första (I–II) är mera traditionella, i och med att de baserar sig på homo economicus (eng. the economic man), utan att beakta den inre motivationen. I essä I (publicerad 2008) bedömer vi fördelar och nackdelar av privatisering och avreglering innanför en sådan ram, men med en betoning också på icke återvinningsbara fasta kostnader och vertikala relationer. I essä II (publicerad 2012) fokuserar vi oss på vertikal separation, och konkurrensutsättning och privatisering i nätverksindustrier. I essäerna III–V vidgas perspektivet genom att införa potentiell inre motivation i en agentmodell. Analysen i essä III (publicerad 2014) tillämpas på offentligt ägande och privatisering. I essäerna IV och V (publicerade 2009 respektive 2013) utvidgas analysen till att även gälla kreativa branscher, särskilt arbete inom universiteten, där den inre motivationen hos de anställda kan tänkas vara avgörande. I dessa essäer tillämpas en analys som inbegriper ett intra-personellt spel inom ramen för en agentmodell med potentiell inre motivation. Vi analyserar sålunda avvägningen mellan ekonomiska incitament och inre motivation.

The requirements and needs of global data usage in product lifecycle management

This study was done for ABB Ltd. Motors and Generators business unit in Helsinki. In this study, global data movement in large businesses is examined from a product data management (PDM) and enterprise resource planning (ERP) point-of-view. The purpose of this study was to understand and map out how a large global business handles its data in a multiple site structure and how it can be applied in practice. This was done by doing an empirical interview study on five different global businesses with design locations in multiple countries. Their master data management (MDM) solutions were inspected and analyzed to understand which solution would best benefit a large global architecture with many design locations. One working solution is a transactional hub which negates the effects of multisite transfers and reduces lead times. Also, the requirements and limitations of the current MDM architecture were analyzed and possible reform ideas given.  

Competitive advantage through proprietary erp implementation: analysis of the project Väinämö

In the market where companies similar in size and resources are competing, it is challenging to have any advantage over others. In order to stay afloat company needs to have capability to perform with fewer resources and yet provide better service. Hence development of efficient processes which can cut costs and improve performance is crucial. As business expands, processes become complicated and large amount of data needs to be managed and available on request. Different tools are used in companies to store and manage data, which facilitates better production and transactions. In the modern business world the most utilized tool for that purpose is ERP - Enterprise Resource Planning system. The focus of this research is to study how competitive advantage can be achieved by implementing proprietary ERP system in the company; ERP system that is in-house created, tailor made to match and align business needs and processes. Market is full of ERP software, but choosing the right one is a big challenge. Identifying the key features that need improvement in processes and data management, choosing the right ERP, implementing it and the follow-up is a long and expensive journey companies undergo. Some companies prefer to invest in a ready-made package bought from vendor and adjust it according to own business needs, while others focus on creating own system with in-house IT capabilities. In this research a case company is used and author tries to identify and analyze why organization in question decided to pursue the development of proprietary ERP system, how it has been implemented and whether it has been successful. Main conclusion and recommendation of this research is for companies to know core capabilities and constraints before choosing and implementing ERP system. Knowledge of factors that affect system change outcome is important, to make the right decisions on strategic level and implement on operational level. Duration of the project in the case company has lasted longer than anticipated. It has been reported that in cases of buying ready product from vendor, projects are delayed and completed over budget as well. In general, in case company implementation of proprietary ERP has been successful both from business performance figures and usability of system by employees. In terms of future research, conducting a study to calculate statistically ROI of both approaches; of buying ready product and creating own ERP will be beneficial.

An examination of factors influencing ERP key-user satisfaction: A qualitative case study

Several companies are trying to improve their operation efficiency by implementing an enterprise resource planning (ERP) system that makes it possible to control the resources of the company in real time. However, the success of the implementation project is not a foregone conclusion; a significant part of these projects end in a failure, one way or another. Therefore it is important to investigate ERP system implementation more closely in order to increase understanding about factors influencing ERP system success and to improve the probability of a successful ERP implementation project. Consequently, this study was initiated because a manufacturing case company wanted to review the success of their ERP implementation project. To be exact, the case company hoped to gain both information about the success of the project and insight for future implementation improvement. This study investigated ERP success specifically by examining factors that influence ERP key-user satisfaction. User satisfaction is one of the most commonly applied indicators of information system success. The research data was mainly collected by conducting theme interviews. The subjects of the interviews were six key-users of the newly implemented ERP system. The interviewees were closely involved in the implementation project. Furthermore, they act as representative users that utilize the new system in everyday business processes. The collected data was analyzed by thematizing. Both data collection and analysis were guided by a theoretical frame of reference. This frame was based on previous research on the subject. The results of the study aligned with the theoretical framework to large extent. The four principal factors influencing key-user satisfaction were change management, contractor service, key-user’s system knowledge and characteristics of the ERP product itself. One of the most significant contributions of the research is that it confirmed the existence of a connection between change management and ERP key-user satisfaction. Furthermore, it discovered two new sub-factors influencing contractor service related key-user satisfaction. In addition, the research findings indicated that in order to improve the current level of key-user satisfaction, the case company should pay special attention to system functionality improvement and enhancement of the key-users’ knowledge. During similar implementation projects in the future, it would be important to assure the success of change management and contractor service related processes.

Improving productivity by developing knowledge management practices for a consulting company

The objective of the research was to identify knowledge conversion states in consultancy sales and delivery processes for the company’s one business unit, to know where to store certain types of information and knowledge, and to create best practices for the company’s knowledge management activities in the selected business processes. The used research methodology was action research. The current business processes were analyzed by interviewing people involved in them. The results were documented and catego- rized, and based on them the target states of the processes were developed. Knowledge man- agement activities were integrated to the business processes. The main findings of the research were that roles and responsibilities in the processes were not clear to people, information systems did not fully support individuals and time was wasted searching for information and knowledge. There were also many variations of how the processes actually realized, which affected the overall quality of the process. The conclusions of the research were that knowledge management activities should be high- lighted in businesses where knowledge workers are the main assets of the company. Knowledge management practices can be supported by company culture, leadership and in- formation systems. However, one main factor is each individual’s willingness to share knowledge. By integrating knowledge management activities to business processes and hav- ing information systems supporting knowledge management, individual productivity can be improved.

Replacing traditional ERP with EAI - the next generation’s ERP

Organizations often consider investing in a new Enterprise Resource Planning (ERP) system as a way to enhance their business processes, as it allows integrating information used by multiple different departments into a harmonized computing system. The hope of gaining significant business benefits, such as reducing operating costs, is the key reason why organizations have decided to invest in ERP systems since 1990’s. Still, all ERP projects do not end up in success, and deployment of ERP system does not necessarily guarantee the results people were waiting for. This research studies why organizations invest in ERP, but also what downsides ERP projects currently have. Additionally Enterprise Application Integrations (EAI) as next generation’s ERP solutions are studied to challenge and develop traditional ERP. The research questions are: What are the weaknesses in traditional ERP deployment in today’s business? How does the proposed next generation’s ERP answer to these weaknesses? At the beginning of the thesis, as an answer to the first research question, the basics of ERP implementation are introduced with both the pros and cons of investing in ERP. Key concepts such as IS integration and EAI are also studied. Empirical section of the thesis focuses on answering the second research question from the integration approach. A qualitative research is executed by interviewing five experienced IT professionals about EAI benefits, limitations, and problems. The thematic interview and questionnaire follow the presented ERP main elements from literature. The research shows that adopting traditional ERP includes multiple downsides, e.g. inflexibility and requiring big investments in terms of money. To avoid these critical issues, organizations could find a solution from integrations between their current IS. Based on the empirical study a new framework for the next generation’s ERP is created, consisting of a model and a framework that deal with various features regarding IS adoption. With this framework organizations can assess whether they should implement EAI or ERP. The model and framework suggest that there are multiple factors IT managers needs to consider when planning their IT investments, including their current IS, role of IT in the organization, as well as new system’s flexibility, investment level, and number of vendors. The framework created in the thesis encourages IT management to assess holistically their i) organization, ii) its IT, and iii) solution requirements in order to determine what kind of IS solution would suit their needs the best.