Sustainability of palm oil production and opportunities for Finnish technology and know-how transfer

The global demand for palm oil is growing, thus prompting an increase in the global production particularly in Malaysia and Indonesia. Such increasing demand for palm oil is due to palm oil’s relatively cheap price and versatile advantage both in edible and non-edible applications. Along with the increasing demand for palm oil, particularly for the production of biofuel, is a heated debate on its sustainability. Ecological degradation, climate change and social issues are among the main sustainability issues pressing the whole palm oil industry today. Clean Development Mechanism (CDM) projects fulfilling the imperatives of the Kyoto Protocol are starting to gain momentum in Malaysia as reflected by the increasing registration of CDM projects in the palm oil mills. Most CDM projects in palm oil mills are on waste-to-energy, cocomposting, and methane recovery with the latter being the most common. The study on greenhouse gases (GHG) in the milling process points that biogas collection and energy utilisation has the greatest positive effect on GHG balance. On the other hand, empty fruit bunches (EFB) end-use as energy and high energy efficiency of the mill have the least effect on GHG balance of the mill. The range of direct GHG emissions from the palm oil mill is from 2.5 to 27 gCO2e/MJCPO, while the range of GHG emissions with all indirect and avoided emissions included is from -9 to 29 gCO2e/MJCPO. Comparing this GHG balance result with that of the EU RES-Directive suggests a further check on the values and emissions consideration of the latter.

On the effects of welding parameters on weld quality of plasma arc keyhole welding of structural steels

The possibility and the usefulness of applying plasma keyhole welding to structural steels with different compositions and material thicknesses, and in various welding positions has been examinated. Single pass butt welding with I groove in flat, horizontal vertical and vertical positions and root welding with V , Y and U grooves of thick plate material in flat position have been studied and the welds with high quality has been obtained. The technological conditions for successful welding are presented. The single and interactive effects of welding parameters on weld quality, especially on surface weld defects, geometrical form errors, internal defects and mechanical properties (strength, ductility, impact toughness, hardness and bendability) of weld joint, are presented. Welding parameter combinations providing the best quality welds are also presented.

Interaktiivisen asiakasrajapinnan mahdollistamat energiatehokkuutta tukevat toiminnot ja niiden kannattavuus

Automaattisen mittarinluvun yleistyminen ja asiakkaan verkkoliitynnässä käytettävän tekniikan kehittyminen luovat pohjan uudentyyppisen interaktiivisen asiakasrajanpinnan synnylle. Se voi osaltaan mahdollistaa asiakkaan entistä joustavamman sähköverkkoon liitynnän sekä nykyistä reaaliaikaisemmat ja tarkemmat mittaukset. Näiden pohjalle on mahdollista kehittää erilaisia energiatehokkuutta tukevia toimintoja ja niihin perustuvia palveluita. Tämän työn tarkoituksena on tutkia interaktiivisen asiakasrajapinnan mahdollistamia energiatehokkuutta tukevia toimintoja. Lupaavimpia toimintoja, niiden kannattavuutta ja potentiaalia energiatehokkuuden parantamisessa analysoidaan tarkemmin. Lisäksi tarkastellaan niihin tarvittavaa tekniikkaa, mittaustietoja ja tiedonsiirtoa. Nykyinen tekniikka mahdollistaa useiden erilaisten energiatehokkuutta tukevien toimintojen toteuttamisen. Tässä työssä käsiteltiin tarkemmin energiayhtiön AMR-pohjaista tasehallintaa ja sähkön pienkuluttajien hintaohjausta. AMR-pohjaisen tasehallinnan havaittiin olevan oikein kohdennettuna kannattavaa. Sähkön hintaohjaus voi laajassa mittakaavassa toteutettuna olla kannattavaa, mutta yksittäiskohteissa sen toteutuksen kustannukset ovat liian suuret. Suurimpia ongelmia energiatehokkuutta tukevien toimintojen toteutuksen kannalta muodostavat usein kiinteät kustannukset sekä yleisten rajapin-tavaatimusten ja toimintamallien puute. Tuotteiden standardointi, sarjatuotanto sekä tekniikan kehittyminen voivat mahdollistaa kiinteiden kustannusten huomattavan pienenemisen ja tätä kautta toimintojen kustannustehokkuuden paranemisen. Kehittämällä uusia yhteisiä toimintamalleja ja tuotteita voidaan käytettävissä olevaa tekniikkaa hyödyntää tehokkaammin. Myös uudet näköpiirissä olevat nopeammat ja luotettavammat tiedonsiirtotekniikat voivat mahdollistaa reaaliaikaisemmat mittaustietojen ja signaalien välitykset, mikä usein parantaa toimintojen tehokkuutta ja kannattavuutta.

Defining a Performance Measurement System for Technology Marketing Team by Using the Balanced Scorecard Method

This thesis was produced for the Technology Marketing unit at the Nokia Research Center. Technology marketing was a new function at Nokia Research Center, and needed an established framework with the capacity to take into account multiple aspects for measuring the team performance. Technology marketing functions had existed in other parts of Nokia, yet no single method had been agreed upon for measuring their performance. The purpose of this study was to develop a performance measurement system for Nokia Research Center Technology Marketing. The target was that Nokia Research Center Technology Marketing had a framework for separate metrics; including benchmarking for starting level and target values in the future planning (numeric values were kept confidential within the company). As a result of this research, the Balanced Scorecard model of Kaplan and Norton, was chosen for the performance measurement system for Nokia Research Center Technology Marketing. This research selected the indicators, which were utilized in the chosen performance measurement system. Furthermore, performance measurement system was defined to guide the Head of Marketing in managing Nokia Research Center Technology Marketing team. During the research process the team mission, vision, strategy and critical success factors were outlined.

Marketing of Lappeenranta University of Technology energy auditing services

The objective of this study was to find out how LUT Energy should start marketing its energy audit services, what would be the optimal pricing policy for its services and how LUT Energy could manage customer expectations towards quality of its auditing services. In order to answer these questions, a quantitative survey questionnaire was sent by e-mail to 56 companies from the regions of South Karelia and Kymenlaakso. The empirical data of the study was the answers and opinions of the companies, previous researches about energy efficiency and articles and presentations about the current situation in the energy efficiency market. The results of the study were that there is a great potential for energy audit services and also the legislation requires companies to improve their energy efficiency. To start marketing its services, LUT Energy should first clarify its service concept and divide its service offering into two offers. It should also clarify the marketing message it wants to send its customers and then do the marketing with the help of three-way-model. The best pricing policy for the service would be that the price is proportioned to the future savings. In order to ensure the quality of its services, LUT Energy has to make sure that both dimensions of the quality are managed properly and to fade out customer expectations towards the quality the auditing work has to be monitored.

Expectations and Experiences of International Students in Information Technology Department

Education in Finland plays a significant role. International students are becoming an essential part of Finnish Educational system. The study was meant to examine their expectations and experiences in a Finnish University. As a case, Lappeenranta University of Technology (LUT) was chosen and, in particular, Information Technology (IT) Department. The main objectives of the study were to examine students’ satisfaction of their study experiences, their evaluation of the teaching quality of courses and last but not least the cultural impact on those. Data for the study were mainly collected with the help of three Internet surveys from a sample of 50 students – currently studying at LUT or already graduated. Response rate from questionnaire to questionnaire varied, however, still close to average and was considered as good and relevant enough. The study was initially meant as qualitative, however, a number of quantitative data analysis methods were used as well. Most of students’ expectations appear to become true, majority of students are satisfied with their experiences. Results show that teaching quality in LUT is evaluated as ‘good’. Nevertheless, students prefer particular courses to the other ones. In conclusion, it can be said that culture does affect students’ expectations, experiences, perception of the world, however, cultural differences do not cause any serious problems.

Web 2.0 technology assisted global knowledge network as an organizations key asset

Aim of the Thesis is to study and understand the theoretical concept of Metanational corporation and understand how the Web 2.0 technologies can be used to support the theory. Empiric part of the study compares the theory to the case company’s current situation Goal of theoretical framework is to show how the Web 2.0 technologies can be used in the three levels of the Metanational corporation. In order to do this, knowledge management and more accurately knowledge transferring is studied to understand what is needed from the Web 2.0 technologies in the different functions and operations of the Metanational corporation. Final synthesis of the theoretical framework is to present a model where the Web 2.0 technologies are placed on the levels of the Metanational corporation. Empirical part of the study is based on interviews made in the case company. Aim of the interviews is to understand the current state of the company related to the theoretical framework. Based on the interviews, the differences between the theoretical concept and the case company are presented and studied. Finally the study presents the found problem areas, and where the adoption of the Web 2.0 tools is seen as beneficiary, based on the interviews and theoretical framework.

Mobile technology, gender and development in Africa, India and Bangladesh

Presenting

Software Licensing: Implementing Electronic Licensing in Medical Technology Company

The purpose of this thesis is to examine software licensing, how a software developer can benefit from it and to define specifications for licensing system of software based medical technology product. The thesis has been divided into theoretical and empirical parts. In the theoretical part the concept of software licensing and different aspects that are connected to it are examined with a help of research material. On the ground of this research, in the empirical part, a licensing system for a medical software product called iCentral is designed. The empirical part is based on interviews, questionnaire and on authors own experience gained while working for the case-company.The thesis has great practical importance for the case-company by proposing both an ideal, and more importantly, practical implementation for a licensing system of a product. Thesis shows that electronic licensing is a viable option to sell medical technology products without a need to revise existing procedures or the enterprise resource system in the case company.

Regional potential for collaborative implementation of small CHP plants in bioenergy technology

This thesis is a preliminary study targeting South-Eastern Finland. The objective was to find out the financial and functional readiness and willingness of the small and medium-sized enterprises of the region to manufacture and sell distributed bioenergy solutions collaboratively as a business network. In this case these solutions mean small-scale (0.5 - 3 MW) woodchips-operated combined heat and power (CHP) plants. South-Eastern Finland has suffered from a decline in the recent years, mostly due to the problems of the traditionally strong industrial know-how area of the region, the paper industry. Local small and medium-sized companies will have to find new ways to survive the toughening competition. A group of 40 companies from suitable industries were selected and financial and comparative analysis was performed on them. Additionally 19 managing directors of the companies were selected for an interview to find out their views on networking, its requirements, advantages and the general interest in it. The studied companies were found to be generally in fairly good financial condition and in that sense, fit for networking activities. The interviews revealed that the companies were capable of producing all the needed elements for the plants in question, and the managers appeared to be very interested in and have a positive attitude towards such business networks. Thus it can be said that the small and medium-sized companies of the region are capable of and interested in manufacturing small bio-CHP plants as a production network.

Choice of Business Process Modeling Methodology - Case Northern Dimension Research Centre (NORDI) in Lappeenranta University of Technology

The main outcome of the master thesis is innovative solution, which can support a choice of business process modeling methodology. Potential users of this tool are people with background in business process modeling and possibilities to collect required information about organization’s business processes. Master thesis states the importance of business process modeling in implementation of strategic goals of organization. It is made by revealing the place of the concept in Business Process Management (BPM) and its particular case Business Process Reengineering (BPR). In order to support the theoretical outcomes of the thesis a case study of Northern Dimension Research Centre (NORDI) in Lappeenranta University of Technology was conducted. On its example several solutions are shown: how to apply business process modeling methodologies in practice; in which way business process models can be useful for BPM and BPR initiatives; how to apply proposed innovative solution for a choice of business process modeling methodology.

Teollisuuden ja yhdyskuntien energiatehokkuusselvitykset, auditoinnit 2008–2010

Nykypäivänä energiansäästötavoitteet ovat haasteena yhä useammalle energiankuluttajalle. Tavoitteisiin päästäkseen yritykset ja kunnalliset energiankuluttajat kaipaavat usein apua kannattavien energiansäätökeinojen löytämiseksi. Erilaiset energiakatselmukset vastaavat tähän tarpeeseen ja ovat esimerkki tuloksellisesta energiansäästöstä. Lappeenrannan teknillinen yliopisto on tutkinut energiatehokkuutta pitkään erilaisissa projekteissa teollisuuden kanssa yhteistyössä. Osa LUT:n energiatehokkuustutkimusta ovat energia-auditoinnit yrityksille ja kunnille, joita LUT Energian projektin puitteissa alettiin kehittää vuoden 2008 syksyllä. Energia-auditointien fokuksena on pyritty pitämään pumppausprosessien energiatehokkuuden optimointia, sillä aihetta on tutkittu yliopistolla laajasti. Pumppausprosesseissa on todettu olevan merkittävä energiansäästöpotentiaali: pumppauksen kuluttamasta energiasta voi olla mahdollista säästää jopa 50 % erilaisilla laite- ja säästötaparatkaisuilla. Pumppausprosessien energia-auditointeja on tehty teollisuuden pumppauskohteisiin kuin myös kunnallisiin vesi-huoltolaitoksiin. Lisäksi energia-auditointien puitteissa on tutkittu energiansäästömahdollisuuksia rakennuksissa. Energiansäästökohteita etsitään sekä lämpö- että sähköenergian osalta. Energia-auditoinneissa pumppausten osalta energiansäästöpotentiaalia on todettu olevan etenkin suuren kokoluokan pumpuissa, joilla on pitkä vuosittainen käyttöaika. Myös pumppujen säätötavalla on suuri merkitys energiankulutukseen. Rakennusten osalta on pyritty selvittämään, kuinka energiankulutus jakautuu eri kulutusryhmien kesken. Säästökohteita on löydetty muun muassa rakennusten tiiviydestä, ilmanvaihdosta kuin valaistuksestakin. Monia auditointien asiakkaita on kiinnostanut etenkin led-teknologian hyödyntäminen yleisvalaistuksessa sekä muut keinot säästää valaistuksen energiankulutuksessa. Pyrkimyksenä on kehittää energia-auditointeja projektin aikana saavutettujen kokemusten avulla sekä myös liiketaloudellisessa mielessä opinnäytetutkielmien avulla. Menestyksekäs palveluliiketoiminta edellyttää määriteltyjä toimintatapoja, riittävän tarkkaa palvelujen rajausta ja koko energia-auditointiprosessin kehittämistä aina asiakassuhteen luomisesta sen jatko-hoitoon saakka.

Commercializing technology in transitional economies. Case: Nanotechnology in Russia

The aim of the study is to find out “What are the challenges to overcome for the successful nanotechnology commercialization in Russia?” Working closely with the case country was definitely an advantage when it comes to the understanding of the research subject. The thesis is divided to two parts: first part examines the concept of technology commercialization and identifies unique aspects of the process in context of nanotechnology. Second part is dedicated to an empirical research, investigating current status of nanotechnology commercialization in Russia. For the purpose of this study, Russian and international scientists, researchers, entrepreneurs, industry and government representatives were interviewed systematically during 2007 – 2009. Based on the research done it can be concluded that immense public funding provides necessary support for the development of Russian nanotechnology industry. However, investments alone do not address important structural shortcomings of a national innovation system, which in turn slow down the progress. Taking into consideration gap between science and business and challenging IPR legislation, expected significant economic impact in Russia may be overestimated. Nevertheless it should be noted that development of nanotechnology is advancing rapidly and therefore, the state of commercialization is changing accordingly, even while this lines are written.