Empiirinen analyysi tilitoimiston liikeriskeistä ja niiden hallinnasta

Tämän tutkimuksen aiheena ovat tilitoimiston liikeriskit ja niiden hallinta. Tilitoimistot ovat merkittävässä asemassa tuottaessaan asiakasyrityksistään taloudellista tietoa paitsi yritykselle itselleen myös sen sidosryhmille sekä yhteiskunnalle. Tilitoimiston toimintaa ja samalla riskienhallintaa ohjaa erityisesti hyvä tilitoimistotapa, jonka noudattaminen auttaa ylläpitämään ammatillista arvostusta. Tilitoimiston liikeriskit voidaan jakaa henkilöstöriskeiksi, sopimus- ja vastuuriskeiksi sekä tietoriskeiksi, joihin kuuluvat myös väärinkäytösriskit. Sopimus- ja vastuuriskejä hallitaan kirjallisin toimeksiantosopimuksin vakiosopimusehtoja käyttämällä sekä vastuuvakuutuksin. Tietoriskien hallinnassa apuna ovat salas-sapitosopimukset, tietoturvatoimet ja ohjeet. Väärinkäytösriskejä hallitaan parhaiten ennaltaehkäisemällä. Henkilöstö on tilitoimistojen suurin resurssi, mutta samalla myös suurin riskitekijä. Henkilöstö on myös avainasemassa tilitoimistojen riskienhallinnan toteuttamisessa. Suurimpia henkilöstöön kohdistuvia riskejä ovat avainhenkilöihin, työhyvinvointiin, jaksamiseen, motivaatioon sekä työvoiman saatavuuteen kohdistuvat riskit. Näitä kaikkia pystytään hallitsemaan toimivalla henkilöstöhallinnolla ja varahenkilöjärjestelmillä. Tutkimuksen empiirinen osio toteutettiin satunnaisesti valittuihin eteläsuomalaisiin tilitoimistoihin suunnatulla kyselytutkimuksella. Tutkimustuloksista käy ilmi, että tilitoimistojen tieto-, sopimus- ja vastuuriskien hallinta on hyvällä tasolla, mutta että henkilöstöriskien hallinnassa on jonkin verran parantamisen varaa. Tutkimus vahvistaa myös, että pk-sektorilla toimivien tilitoimistojen kannattaa käyttää kokonaisvaltaista riskienhallintaa liikeriskiensä hallitsemiseen ja toiminnan laadun turvaamiseen.

Enhancing human security through crisis management : opportunities and challenges for learning

Inhimilliseen turvallisuuteen kriisinhallinnan kautta – oppimisen mahdollisuuksia ja haasteita Kylmän sodan jälkeen aseelliset konfliktit ovat yleensä alkaneet niin sanotuissa hauraissa valtioissa ja köyhissä maissa, ne ovat olleet valtioiden sisäisiä ja niihin on osallistunut ei-valtiollisia aseellisia ryhmittymiä. Usein ne johtavat konfliktikierteeseen, jossa sota ja vakaammat olot vaihtelevat. Koska kuolleisuus konflikteissa voi jäädä alle kansainvälisen määritelmän (1000 kuollutta vuodessa), kutsun tällaisia konflikteja ”uusiksi konflikteiksi”. Kansainvälinen yhteisö on pyrkinyt kehittämään kriisinhallinnan ja rauhanrakentamisen malleja, jotta pysyvä rauhantila saataisiin aikaiseksi. Inhimillinen turvallisuus perustuu näkemykseen, jossa kunnioitetaan jokaisen yksilön ihmisoikeuksia ja jolla on vaikutusta myös kriisinhallinnan ja rauhanrakentamisen toteuttamiseen. Tutkimukseen kuuluu kaksi empiiristä osaa: Delfoi tulevaisuuspaneeliprosessin sekä kriisinhallintahenkilöstön haastattelut. Viisitoista eri alojen kriisinhallinta-asiantuntijaa osallistui paneeliin, joka toteutettiin vuonna 2008. Paneelin tulosten mukaan tulevat konfliktit usein ovat uusien konfliktien kaltaisia. Lisäksi kriisinhallintahenkilöstöltä edellytetään vuorovaikutus- ja kommunikaatiokykyä ja luonnollisesti myös varsinaisia ammatillisia valmiuksia. Tulevaisuuspaneeli korosti vuorovaikutus- ja kommunikaatiotaitoja erityisesti siviilikriisinhallintahenkilöstön kompetensseissa, mutta samat taidot painottuivat sotilaallisen kriisinhallinnan henkilöstön kompetensseissakin. Kriisinhallinnassa tarvitaan myös selvää työnjakoa eri toimijoiden kesken. Kosovossa työskennelleen henkilöstön haastatteluaineisto koostui yhteensä 27 teemahaastattelusta. Haastateltavista 9 oli ammattiupseeria, 10 reservistä rekrytoitua rauhanturvaajaa ja 8 siviilikriisinhallinnassa työskennellyttä henkilöä. Haastattelut toteutettiin helmi- ja kesäkuun välisenä aikana vuonna 2008. Haastattelutuloksissa korostui vuorovaikutus- ja kommunikaatiotaitojen merkitys, sillä monissa käytännön tilanteissa haastateltavat olivat ratkoneet ongelmia yhteistyössä muun kriisinhallintahenkilöstön tai paikallisten asukkaiden kanssa. Kriisinhallinnassa toteutui oppimisprosesseja, jotka usein olivat luonteeltaan myönteisiä ja informaalisia. Tällaisten onnistumisten vaikutus yksilön minäkuvaan oli myönteinen. Tällaisia prosesseja voidaan kuvata ”itseä koskeviksi oivalluksiksi”. Kriisinhallintatehtävissä oppimisella on erityinen merkitys, jos halutaan kehittää toimintoja inhimillisen turvallisuuden edistämiseksi. Siksi on tärkeää, että kriisinhallintakoulutusta ja kriisinhallintatyössä oppimista kehitetään ottamaan huomioon oppimisen eri tasot ja ulottuvuudet sekä niiden merkitys. Informaaliset oppimisen muodot olisi otettava paremmin huomioon kriisinhallintakoulutusta ja kriisinhallintatehtävissä oppimista kehitettäessä. Palautejärjestelmää olisi kehitettävä eri tavoin. Koko kriisinhallintaoperaation on saatava tarvittaessa myös kriittistä palautetta onnistumisista ja epäonnistumisista. Monet kriisinhallinnassa työskennelleet kaipaavat kunnollista palautetta työrupeamastaan. Liian rutiininomaiseksi koettu palaute ei edistä yksilön oppimista. Spontaanisti monet haastatellut pitivät tärkeänä, että kriisinhallinnassa työskennelleillä olisi mahdollisuus debriefing- tyyppiseen kotiinpaluukeskusteluun. Pelkkä tällainen mahdollisuus ilmeisesti voisi olla monelle myönteinen uutinen, vaikka tilaisuutta ei hyödynnettäisikään. Paluu kriisinhallintatehtävistä Suomeen on monelle haasteellisempaa kuin näissä tehtävissä työskentelyn aloittaminen ulkomailla. Tutkimuksen tulokset kannustavat tutkimaan kriisinhallintaa oppimisen näkökulmasta. On myös olennaista, että kriisinhallinnan palautejärjestelmiä kehitetään mahdollisimman hyvin edistämään sekä yksilöllistä että organisatorista oppimista kriisinhallinnassa. Kriisinhallintaoperaatio on oppimisympäristö. Kriisinhallintahenkilöstön kommunikaatio- ja vuorovaikutustaitojen kehittäminen on olennaista tavoiteltaessa kestävää rauhanprosessia, jossa konfliktialueen asukkaatkin ovat mukana.

Exploring the role and transformative potential of human rights in development practice and food security : case study from Malawi

Avhandlingen är en analys av den roll som mänskliga rättigheter spelar i utvecklingssamarbete i allmänhet och tre matsäkerhetsprojekt i Malawi i synnerhet. Författaren undersöker huruvida mänskliga rättigheter kan bidra till samhälleliga förändringsprocesser. Undersökningen har en diskursiv syn på mänskliga rättigheter; rättigheter ses som sociala konstruktioner skapade av människor, konstruktioner som förändras i takt med att aktörerna ger dem ny mening. Människorättsbaserade utvecklingsstrategier riktar uppmärksamheten mot olika aktörers skyldigheter samt vikten av att mänskliga rättigheter inte kränks genom utvecklingspolitiska beslut. En analys som utgår från mänskliga rättigheter kan leda till att nya frågor lyfts fram: vem har skyldigheter, vem har rättigheter, och varför förverkligas inte dessa? Fokus flyttas till hur politiska, ekonomiska och juridiska strukturer kan förändras så att de främjar mänskliga rättigheter. Författaren använder empiriskt material från Malawi för att visa vilken roll mänskliga rättigheter och så kallade människorättsprinciper spelar inom tre projekt: (1) ett mathjälpsprojekt; (2) ett rättighetsbaserat projekt med fokus på att stärka strategier för livsuppehälle; (3) ett juridiskt projekt inom ramen för vilket man skapat ett lagförslag om rätten till föda. Analysen visar att det rättighetsbaserade projektet strävade efter den mest djupgående samhälleliga förändringen. Människorättsprinciperna ansvarighet och deltagande handlade inte endast om verksamheten inom projektet utan man strävade även efter att stärka dessa principer mellan medborgare och myndigheter. Rättigheter, som ett sätt att tala, tänka och handla, inte som abstrakta juridiska normer, påverkade de lokala aktörernas sätt att kräva bl.a. tjänster av lokala myndigheter. Teoretiskt kan man säga att det rättighetsbaserade projektet representerar ett aktörsperspektiv på mänskliga rättigheter där aktörernas egna uppfattningar om vad de är berättigade till samt krav på myndigheters ansvar formade vilken mening rättigheterna kom att få.

Configuration management process improvement : a case study of a Pan-Nordic insurance company

Configuration management is often seen as an enabler for the main IT Service Management (ITSM) processes such as Incident and Problem management. A decent level of quality of IT configuration data is required in order to carry out routines of these processes. This case study examines the state of configuration management in a multinational organization and aims at identification of methods for its improvement. The author has stayed five months with this company in order to collect different sources of evidence and to make observations. The main source of data for this study is interviews with some of the key employees of the assigned organization who are involved into the ITSM processes. This study concludes the maturity level of the existing configuration management process to be repeatable but intuitive, and outlines the principal requirements for its improvement. A match between the requirements identified in the organization and the requirements stated in the ISO/IEC 20000 standard indicates the possibility of adopting ITIL guidelines as a method for configuration management process improvement. The outcome of the study presents a set of recommendations for improvement that considers the process, the information model and the information system for configuration management in the case organization.

Developing customer need based services in personal security service industry

The purpose of this thesis is to examine how services can be developed and how the voice of the customer can be incorporated to the strategic planning of services. Furthermore, the objective is to investigate the methods of customer need analysis and service bundling. The data is collected from secondary and primary sources by reviewing the existing academic literature and by conducting in-depth interviews and surveys. The main findings of this research indicate that the service development in personal security service industry should be conducted through a formalized process and the process should begin with setting the strategic objectives. Moreover, the voice of the customer should be incorporated into all stages of the development process, especially into the front-end of the process. Furthermore, the information on customer needs should be gathered in a manner tailored for the purposes of service development.

Lean daily management, visual management and continuous improvement

This thesis was part of lean adaptation project started at Outotec Lappeenranta factory in early 2013. The purpose of this thesis was to develop and propose lean tools that could be used in daily management, visual management and continuous improvement. This thesis was “outsiders” view, and as such, did not study the current processes deeply. As result of this thesis, two different Daily Management -boards were designed, one for parallel processes and one for sequential processes. In addition, methods of doing continuous improvement and daily task accountability were framed and standard work for the leaders outlined. The tools presented in this thesis are general tools which support work in lean environment. They are visual and, if used correctly, they provide a basis from which continuous improvement can be done. Lean philosophy emphasizes the deep understanding of the current situation and it would be against the lean principles to blindly implement anything developed “on the outside”. The tools presented should be reviewed and modified further by the people working on the factory floor.

A cyber security architecture for military networks using a cognitive network approach

Cyber security is one of the main topics that are discussed around the world today. The threat is real, and it is unlikely to diminish. People, business, governments, and even armed forces are networked in a way or another. Thus, the cyber threat is also facing military networking. On the other hand, the concept of Network Centric Warfare sets high requirements for military tactical data communications and security. A challenging networking environment and cyber threats force us to consider new approaches to build security on the military communication systems. The purpose of this thesis is to develop a cyber security architecture for military networks, and to evaluate the designed architecture. The architecture is described as a technical functionality. As a new approach, the thesis introduces Cognitive Networks (CN) which are a theoretical concept to build more intelligent, dynamic and even secure communication networks. The cognitive networks are capable of observe the networking environment, make decisions for optimal performance and adapt its system parameter according to the decisions. As a result, the thesis presents a five-layer cyber security architecture that consists of security elements controlled by a cognitive process. The proposed architecture includes the infrastructure, services and application layers that are managed and controlled by the cognitive and management layers. The architecture defines the tasks of the security elements at a functional level without introducing any new protocols or algorithms. For evaluating two separated method were used. The first method is based on the SABSA framework that uses a layered approach to analyze overall security of an organization. The second method was a scenario based method in which a risk severity level is calculated. The evaluation results show that the proposed architecture fulfills the security requirements at least at a high level. However, the evaluation of the proposed architecture proved to be very challenging. Thus, the evaluation results must be considered very critically. The thesis proves the cognitive networks are a promising approach, and they provide lots of benefits when designing a cyber security architecture for the tactical military networks. However, many implementation problems exist, and several details must be considered and studied during the future work.

Improvement of wet and dry web properties in papermaking by controlling water and fiber quality

Pappersindustrin står inför många utmaningar och bör uppfylla krav som ställs av t.ex. marknadstrender och slutanvändare. Snabbare och effektivare processer ställer även större krav på pappersbanans mekaniska egenskaper. Avbrott i produktionen sker inte enbart pga. låg styrka utan orsaken kan även vara en för låg spänning i pappersbanan. De flesta problemen sker vid våtpressen och/eller i början av torkpartiet då papprets torrhalt är 30-70 %. Spänningen hålls inte konstant efter töjning, utan sjunker pga. papprets relaxering, som till största delen sker då pappret flyttas från pressen till torkpartiet. Ur forskningssynvinkel öppnar en smidigt fungerande verksamhet med potentiella energibesparingar upp möjligheterna för förbättring av befintliga processer. I detta arbete undersöktes hur olika faktorer inverkar på fibernätverkets avvattning, initiala våtstyrka och relaxering samt också på slutproduktens mekaniska egenskaper och ytegenskaper. I första delen ändrades processvattnets egenskaper, såsom pH, konduktivitet och ytspänning. Ytspänningen varierades genom tillsatts av ett nonjoniskt ytaktivt ämne, s.k. surfaktant. Fiberegenskaperna modifierades också. Fibern maldes antingen genom en mild eller genom en hård process. Effekten av finmaterial undersöktes genom att tillsätta finmaterial till den ursprungliga massan eller genom att avlägsna finmaterialet från den malda massan. I den sista delen användes en hemicellulosa, som finns i stora mängder i gran, som tillsatsmedel. Förutom naturliga galaktoglukomannaner (GGM), tillverkades också en katjoniserad, en karboximetylerad samt en iminerad, amfifil GGM. Dessa användes i pappersmassa eller sprayades på ytan av ett nybildat ark. Resultaten, som erhölls i denna avhandling, bildar en värdefull kunskapsbas, som kan användas för kontroll och reglering av pappersmaskinens körbarhet och papperskvalitet.

Service Blueprinting in Irregularity Service Improvement, case Swissport Finland Ltd

The trend of concentrating to core competencies leads to outsourcing of non-core activities. One such activity is logistics, where the responsibility is given to third-party service providers. This means the service provider acts as an intermediary between the buyer and the end customer. This thesis concentrates on depicting the operational environment of one such service provider, Swissport Finland Ltd, and the improvement of their checked baggage irregularity service. The tools used for this work were service blueprinting, an illustrative method for service mapping, and failure modes and effects analysis. The theoretical part of the thesis offers a framework for using these tools for logistics services, while the empirical part consists of a study mostly qualitative in nature. Action research method was used for the service improvement research. According to the results of this study the combination of service blueprinting and FMEA can be used successfully for irregularity service improvement. The most important result was an enhanced irregularity process that has been found to alleviate earlier problems.

Five Baltic Ports Togehter: Forecasts, Trends and Recommendations

The ports of Stockholm, Tallinn, Helsinki, Naantali and Turku play key roles in making the Central Baltic region accessible. Effective, competitive, eco-friendly and safe port procedures and solutions for the transportation of goods are of major importance for trade in the Baltic Sea region. This report presents the most essential results and recommendations of the PENTA project, which focused on how ports could better comprehend and face current and future challenges facing carriage of goods by sea. Each of the four work packages (WPs) of the PENTA project analysed the changes from a different perspective. WP2 focused on traffic flows between the PENTA ports. Its main emphasis was on the ports, shipowners, and logistics companies that are the key parties in freight transport and on the changes affecting the economy of those ports. In WP3 noise as an environmental challenge for ports was investigated and the analysis also shed light on the relationship between the port and the city. In WP4 procedures related to safety, security and administrative procedures were researched. The main emphasis was on identifying the requirements for the harmonisation of those procedures. Collaboration is highlighted throughout this report. In order to prepare for the future, it was found that ports need to respond to growing competition, increasing costs and shifts in customer demand by strengthening their existing partnerships with other actors in the maritime cluster. Cargo and passenger transport are the main sources of income for most ports. Cargo traffic between the PENTA ports is expected to grow steadily in the future and the outlook for passenger traffic is positive. However, to prepare for the future, ports should not only secure the core activities which generate revenue but also seek alternative ways to make profit. In order to gain more transit traffic, it is suggested that ports conduct a more thorough study of the future requirements for doing business with Russia. The investigation of noise at ports revealed two specific dilemmas that ports cannot solve alone. Firstly, the noise made by vessels and, secondly, the relationship between the port and the surrounding city. Vessels are the most important single noise source in the PENTA ports and also one of the hardest noise sources to handle. Nevertheless, port authorities in Finland and Sweden are held responsible for all noise in the port area, including noise produced by vessels, which is noise the port authority can only influence indirectly. Building housing by waterfront areas close to ports may also initiate disagreements because inhabitants may want quiet areas, whereas port activities always produce some noise from their traffic. The qualitative aspects of the noise question, cooperating with the stakeholders and the communicating of issues related to noise are just as important. We propose that ports should follow the logic of continuous improvement in their noise management. The administrative barriers discussed in this report are mainly caused by differences in international and national legislation, variations in the customs procedures of each country, the incompatibility of the IT systems used in maritime transport, noncompliance with regulations regarding dangerous goods, and difficulties in applying Schengen regulations to vessels from non-EU countries. Improving the situation is out of the hands of the ports to do alone and requires joint action on a variety of levels, including the EU, national authorities and across administrative borders.

Characterization Of Process Efficiency Improvement In Laser Additive Manufacturing

Laser additive manufacturing (LAM), known also as 3D printing, has gained a lot of interest in past recent years within various industries, such as medical and aerospace industries. LAM enables fabrication of complex 3D geometries by melting metal powder layer by layer with laser beam. Research in laser additive manufacturing has been focused in development of new materials and new applications in past 10 years. Since this technology is on cutting edge, efficiency of manufacturing process is in center role of research of this industry. Aim of this thesis is to characterize methods for process efficiency improvements in laser additive manufacturing. The aim is also to clarify the effect of process parameters to the stability of the process and in microstructure of manufactured pieces. Experimental tests of this thesis were made with various process parameters and their effect on build pieces has been studied, when additive manufacturing was performed with a modified research machine representing EOSINT M-series and with EOS EOSINT M280. Material used was stainless steel 17-4 PH. Also, some of the methods for process efficiency improvements were tested. Literature review of this thesis presents basics of laser additive manufacturing, methods for improve the process efficiency and laser beam – material- interaction. It was observed that there are only few public studies about process efficiency of laser additive manufacturing of stainless steel. According to literature, it is possible to improve process efficiency with higher power lasers and thicker layer thicknesses. The process efficiency improvement is possible if the effect of process parameter changes in manufactured pieces is known. According to experiments carried out in this thesis, it was concluded that process parameters have major role in single track formation in laser additive manufacturing. Rough estimation equations were created to describe the effect of input parameters to output parameters. The experimental results showed that the WDA (width-depth-area of cross-sections of single track) is correlating exponentially with energy density input. The energy density input is combination of the input parameters of laser power, laser beam spot diameter and scan speed. The use of skin-core technique enables improvement of process efficiency as the core of the part is manufactured with higher laser power and thicker layer thickness and the skin with lower laser power and thinner layer thickness in order to maintain high resolution. In this technique the interface between skin and core must have overlapping in order to achieve full dense parts. It was also noticed in this thesis that keyhole can be formed in LAM process. It was noticed that the threshold intensity value of 106 W/cm2 was exceeded during the tests. This means that in these tests the keyhole formation was possible.

LVDC power distribution system: computational modelling

In the doctoral dissertation, low-voltage direct current (LVDC) distribution system stability, supply security and power quality are evaluated by computational modelling and measurements on an LVDC research platform. Computational models for the LVDC network analysis are developed. Time-domain simulation models are implemented in the time-domain simulation environment PSCAD/EMTDC. The PSCAD/EMTDC models of the LVDC network are applied to the transient behaviour and power quality studies. The LVDC network power loss model is developed in a MATLAB environment and is capable of fast estimation of the network and component power losses. The model integrates analytical equations that describe the power loss mechanism of the network components with power flow calculations. For an LVDC network research platform, a monitoring and control software solution is developed. The solution is used to deliver measurement data for verification of the developed models and analysis of the modelling results. In the work, the power loss mechanism of the LVDC network components and its main dependencies are described. Energy loss distribution of the LVDC network components is presented. Power quality measurements and current spectra are provided and harmonic pollution on the DC network is analysed. The transient behaviour of the network is verified through time-domain simulations. DC capacitor guidelines for an LVDC power distribution network are introduced. The power loss analysis results show that one of the main optimisation targets for an LVDC power distribution network should be reduction of the no-load losses and efficiency improvement of converters at partial loads. Low-frequency spectra of the network voltages and currents are shown, and harmonic propagation is analysed. Power quality in the LVDC network point of common coupling (PCC) is discussed. Power quality standard requirements are shown to be met by the LVDC network. The network behaviour during transients is analysed by time-domain simulations. The network is shown to be transient stable during large-scale disturbances. Measurement results on the LVDC research platform proving this are presented in the work.

The improvement of enclosure protection class of power electronics device

Tässä diplomityössä tutkittiin vaihtoehtoja tehoelektroniikkalaitteiden kotelointiluokan kehittämiseksi. Haasteena paremman suojauksen suunnittelussa on laitteiden tuottama suuri määrä lämpöä, joka vaatii tehokkaan jäähdytyksen. Työn tuloksena saatu prototyyppi IP33 luokkaa varten täyttää standardissa SFS-EN 60529+A1 asetetut vaatimukset kyseiselle kotelointiluokalle. Rakenteessa ja valmistettavuudessa havaittiin muutama ongelma, jotka ovat korjattavissa pienillä muutoksilla. Korkeampia suojausluokkia varten testattiin IP54-luokiteltujen filtterituulettimien vaikutusta laitteen jäähdytykseen. Testien perusteella jäähdytysteho on riittävä ja filtterituulettimet todettiin toimivaksi ratkaisuksi korkeammille suojausluokille. Työn perusteella voidaan todeta, että nykyiset laitteet voidaan muokata vastaamaan IP33 luokan vaatimuksia kohtuullisen pienillä muutoksilla. Tätä korkeammat suojausluokat vaatisivat niin suuria muutoksia designiin, että todennäköisesti täysin uuden laitteen suunnittelu olis kannattavin vaihtoehto.

Lean Six Sigma in a Manufacturing Lead Time Improvement Project

The objective of this research is to demonstrate the use of Lean Six Sigma methodology in a manufacturing lead time improvement project. Moreover, the goal is to develop working solutions for the target company to improve its manufacturing lead time. The theoretical background is achieved through exploring the literature of Six Sigma, Lean and Lean Six Sigma. The development will be done in collaboration with the related stakeholders, by following the Lean Six Sigma improvement process DMAIC and by analyzing the process data from the target company. The focus of this research is in demonstrating how to use Lean Six Sigma improvement process DMAIC in practice, rather than in comparing Lean Six Sigma to other improvement methodologies. In order to validate the manufacturing system’s current state, improvement potential and solutions, statistical tools such as linear regression analysis were used. This ensured that all the decisions were as heavily based on actual data as possible. As a result of this research, a set of solutions were developed and implemented in the target company. These solutions included batch size reduction, bottleneck shift, first-in first-out queuing and shifting a data entry task from production planners to line workers. With the use of these solutions, the target company was able to reduce its manufacturing lead time by over one third.

Linking supplier delivery risk to outbound delivery service performance improvement

Customer satisfaction should be the main focus for all of the parts of the business. Usually supply chain behind the business is in a key role when this focus is pursued especially in repair service business. When focusing on the materials that are needed to make repairs to equipment under service contracts, the time aspect of quality is critical. Do late deliveries from supplier have an effect on the service performance of repairs when distribution center of a centralized purchasing unit is acting as a buffer between suppliers and repair service business? And if so, how should the improvement efforts be prioritized? These are the two main questions that this thesis focuses on. Correlation and linear regression was tested between service levels of supplier and distribution center. Percentage of on-time deliveries were compared to outbound delivery service level. It was found that there is statistically significant correlation between inbound and outbound operations success. The other main question of the thesis, improvement prioritization, was answered by creating material availability based supplier classification and additional to that, by developing the decision process for the analysis of most critical suppliers. This was built on a basis of previous supplier and material classification methods.