Den vårdande och helande bilden: möten med bildkonst i vårdandets värld

Denna vårdvetenskapliga avhandling syftar till att avtäcka och belysa en vårdande och helande dimension vid existentiellt lidande patienters möten med bildkonst inom vårdkontext. Kunskapssökandet sker i två studier. Den första (studie I) är en ikonografi sk tolkning av konstnären Matthias Grünewalds (ca 1460–1528) senmedeltida altarskåpsmålningar. I studien uttolkas lidandets uttryck och narrativa budskap samt symboliska gestaltningar av vårdande och helande i valda delar av detta s.k. Isenheimaltares bildprogram. Tolkningen utgår från rekonstruktionen av altarskåpets ursprungskontext, det medeltida Isenheimklostret, där svårt sjuka och döende patienter vårdades. I studie två (II) fortsätter sökandet i den moderna hospicevårdens kontext med hjälp av en kvalitativ intervjustudie som utforskar patienters meningsskapande vid möten med självvald bildkonst (oljemålningar och akvareller av fi nländska konstnärer som donerats till det sjukhus där intervjustudien gjordes). Forskningsansatsen är inspirerad av Hans-Georg Gadamers (1901–2002) hermeneutik. Vidare används några nyare tolkningsteoretiska ansatser inom bildkonstens område. Forskningens tolkningsresultat visar att bildkonsten har potentialer såväl på ett miljöestetiskt plan som på en djupare individuell symbolnivå. Som designkomponent i vårdmiljöns rumsliga gestaltning bygger bildkonsten in estetiska, etiska och andliga kvaliteter utifrån tidsmässiga och kulturella koder. I den medeltida klostervårdens kontext sammanföll bildkonstens dekorativa betydelse med andliga och helande syften. När det gäller självvalda konstverk i den moderna vårdkontexten bidrar de till det enskilda patientrummets atmosfär på ett unikt sätt utifrån patientens personlighet och behov. På en fördjupad mötesnivå, i samspel med bildens symboliska funktion, sker en inlevelsemässig förfl yttning in i bildens värld. Betraktarens inlevelse aktiveras till en transcenderande rörelse som går bortom det faktiska rummets och den reella tidens gränser. Vid resor i konstens bildvärld spelas minnesvärda händelser upp från det förgångna, men även framtiden kommer betraktaren till mötes. I en existentiell livssituation söker människan i konstverkets bildinnehåll efter symbolisk mening som kan ge svar på lidandets frågor. Bilderna iscensätter då helande motbilder som utgör korrektiv i symboliska former när olika existentiella förluster hotar. När livet förbleknats av sjukdom besvarar bildvärlden den lidandes blick med lysande violer som blommar upp, ger livskraft och bekräftar personens värdighet mitt i det förvissnande människolivet. När ångest och otrygghet nalkas inbjuds betraktaren till besök i landskap som utvidgar sjukhusrummets väggar mot hemgårdens trygghet. Där livet hotas av förgänglighet tar bildvärlden människan med sig till naturens eviga återfödelse. Upplevelsen av att vara delaktig i ett större och heligt sammanhang öppnar vägen ut ur lidandets avskurenhet. I medeltidens vårdkontext erbjöd den sakrala bilden en kollektiv och helande Symbolon som genom sin representationskraft synliggjorde det osynliga. Vid bildmöten i den moderna hospicevårdens kontext var det naturteman som gläntade på dörren till ”det hemliga rummet i djupet av hjärtat”. Forskningen antyder att även om meningsskapandet i ett bildmöte är avhängigt tidsepok, betraktarens förförståelse och kulturella kontext samt typen av bilder kan bildsymboliken, generellt förstådd som den saknade formen eller det saknade livssammanhanget, framvisa en helande och hoppingivande ordning i lidandets kaos.

Immobilization of Burkholderia cepacia Lipase: Kinetic Resolution in Organic Solvents, Ionic Liquids and in Their Mixtures

Immobilization of Burkholderia cepacia Lipase: Kinetic Resolution in Organic Solvents, Ionic Liquids and in Their Mixtures Biocatalysis opens the door to green and sustainable processes in synthetic chemistry allowing the preparation of single enantiomers, since the enzymes are chiral and accordingly able to catalyze chemical reactions under mild conditions. Immobilization of enzymes enhances process robustness, often stabilizes and activates the enzyme, and enables reuse of the same enzyme preparation in multiple cycles. Although hundreds of variations of immobilization methods exist, there is no universal method to yield the highly active, selective and stable enzyme catalysts. Therefore, new methods need to be developed to obtain suitable catalysts for different substrates and reaction environments. Lipases are the most widely used enzymes in synthetic organic chemistry. The literature part together with the experimental part of this thesis discusses of the effects of immobilization methods mostly used to enhance lipase activity, stability and enantioselectivity. Moreover, the use of lipases in the kinetic resolution of secondary alcohols in organic solvents and in ionic liquids is discussed. The experimental work consists of the studies of immobilization of Burkholderia cepacia lipase (lipase PS) using three different methods: encapsulation in sol-gels, cross-linked enzyme aggregates (CLEAs) and supported ionic liquids enzyme catalysts (SILEs). In addition, adsorption of lipase PS on celite was studied to compare the results obtained with sol-gels, CLEAs and SILEs. The effects of immobilization on enzyme activity, enantioselectivity and hydrolysis side reactions were studied in kinetic resolution of three secondary alcohols in organic solvents, in ionic liquids (ILs), and in their mixtures. Lipase PS sol-gels were shown to be active and stable catalysts in organic solvents and solvent:IL mixtures. CLEAs and SILEs were highly active and enantioselective in organic solvents. Sol-gels and SILEs were reusable in several cycles. Hydrolysis side reaction was suppressed in the presence of sol-gels and CLEAs.

Muotoilun lisääminen teräskalusteisiin Salvagninin S4+P4 – linjan avulla

Diplomityössä tavoitteena on esitellä Salvagninin S4+P4–linjan ja työkalujen ominaisuuksia muotoilun lisäämiseksi teräskalusteisiin. Lähtökohtana on muotoilun ja massaräätälöinnin tehokkaampi lisääminen ja hyödyntäminen nykyisessä tuotevalikoimassa. Teoriaosuudessa käydään lyhyesti läpi ohutlevyjen valmistukseen liittyvät kriittiset rajoitukset levytyökeskuksella. Teoriaosuudessa esitellään laajemmin Salvagninin–linjan ja työkalujen ominaisuuksia ja rajoituksia sekä vertaillaan linjan eroja perinteisiin revolverilevytyökeskuksiin. Lisäksi pohditaan muiden kriittisten työvaiheiden asettamia rajoituksia tuotteiden muotoilun lisäämiseksi. Käytännön osuudessa esitetään teollisten muotoilijoiden suunnitelmat uusiksi ovimalleiksi. Uusien tuotteiden valmistuksesta esitellään tehdyt testiajot ja niiden pohjalta kuvataan arvioinnit niiden valmistettavuudesta. Diplomityön tuloksena syntyi uusien ovimallien kustannustehokkaat ja Salvagninin– linjaan optimoidut valmistusohjeet. Tutkimustulosten mahdollisuuksien lisäksi esitettiin myös eräitä jatkokehitysehdotuksia uusien tuotteiden suunnitteluun.

Ride Comfort of Automatic Elevator Doors

Ride comfort of elevators is one of the quality criteria valued by customers. The objective of this master’s thesis was to develop a process to measure the ride comfort of automatic elevator doors. The door’s operational noise was chosen as a focus area and other kinds of noise for example caused by pressure differences in the elevator shaft were excluded. The thesis includes a theory part and an empirical part. In the first part theories of quality management, measuring of quality and acoustics are presented. In the empirical part the developed ride comfort measuring process is presented, different operational noise sources are analyzed and an example is presented of how this measuring process can be used to guide product development. To measure ride comfort a process was developed where a two-room silent room was used as a measuring environment and EVA-625 device was used in the actual measuring of door noise. A-weighted decibels were used to scale noise pressure levels and the door movement was monitored with an accelerometer. This enabled the connection between the noise and noise sources which in turn helped to find potential ride comfort improvement ideas. The noise isolation class was also measured with the Ivie-measuring system. Measuring of door ride comfort gives feedback to product development and to managing current product portfolio. Measuring enables the continuous improvement of elevator door ride comfort. The measuring results can also be used to back up marketing arguments for doors.

Introduction of the T-10 static line parachuting capability to the NH90 helicopter

The purpose of this study was to investigate the suitability of the Finnish Defence Forces’ NH90 helicopter for parachuting operations with the T-10 static line parachute system. The work was based on the Army Command’s need to compensate for the reduction in the outsourced flight hours for the military static line parachuting training. The aim of the research was to find out the procedures and limitations with which the NH90 IOC+ or FOC version helicopter could be used for static line parachutist training with the T-10B/MC1-1C parachutes. The research area was highly complicated and non-linear. Thus analytical methods could not be applied with sufficient confidence, even with present-day computing power. Therefore an empirical research method was selected, concentrating on flight testing supported with literature study and some calculated estimations. During three flights and 4.5 flight hours in Utti, Finland on 1720 September 2012, a total of 44 parachute drops were made. These consisted of 16 dummy drops and 28 paratrooper jumps. The test results showed that when equipped with the floor mounted PASI-1 anchor line, the deflector bar of the NHIndustries’ Parachuting Kit and Patria’s floor protection panels the Finnish NH90 variant could be safely used for T-10B/MC1-1C static line parachuting operations from the right cabin door at airspeed range of 5080 KIAS (90–150 km/h). The ceiling mounted anchor lines of the NHI’s Parachuting Kit were not usable with the T-10 system. This was due to the static lines’ unsafe behaviour in slipstream when connected to the cabin ceiling level. In conclusion, the NH90 helicopter can be used to meet the Army Command’s requirement for an additional platform for T-10 static line parachutist training. Material dropping, the effect of additional equipment and jumping from the rear ramp should be further studied.

Hissien tasonovien palotestauspalveluiden arviointi.

Elevator landing doors are fire tested to measure their fire resistance. The objective of this master’s thesis was to create a method to evaluate the fire tests and the organizations that provide these testing services. The main focus area was in creating accurate evaluation criteria and weighting the criteria. The thesis was formed by first presenting the reader with the literature review of the closest related theories. The theories which were chosen were systematic decision making, supplier selection, and make or buy and outsourcing theories. In the empirical section the created process of evaluating fire testing is presented, with analysis of the current situation of fire testing processes and evaluation methods. Evaluating fire testing services required two types of criteria to be formed, technical criteria to evaluate the technical requirements, and service criteria to evaluate the organization which was offering the testing service. These criteria formed the core for the evaluation process which consisted of five different phases that were developed based on the literature review. The process was tested to create best practices and to make improvement proposals accordingly. Systematical process for evaluating fire testing helps to recognize the most important technical and service related aspects. The created criteria can be also used in future to benchmark and monitor the situation of fire testing. The results of the process can be used when deciding whether to outsource the service or to keep it in-house.

Introduction of the T-10 static line parachuting capability to the NH90 helicopter

The purpose of this study was to investigate the suitability of the Finnish Defence Forces’ NH90 helicopter for parachuting operations with the T-10 static line parachute system. The work was based on the Army Command’s need to compensate for the reduction in the outsourced flight hours for the military static line parachuting training. The aim of the research was to find out the procedures and limitations with which the NH90 IOC+ or FOC version helicopter could be used for static line parachutist training with the T- 10B/MC1-1C parachutes. The research area was highly complicated and non-linear. Thus analytical methods could not be applied with sufficient confidence, even with present-day computing power. Therefore an empirical research method was selected, concentrating on flight testing supported with literature study and some calculated estimations. During three flights and 4.5 flight hours in Utti, Finland on 17−20 September 2012, a total of 44 parachute drops were made. These consisted of 16 dummy drops and 28 paratrooper jumps. The test results showed that when equipped with the floor mounted PASI-1 anchor line, the deflector bar of the NHIndustries’ Parachuting Kit and Patria’s floor protection panels the Finnish NH90 variant could be safely used for T-10B/MC1-1C static line parachuting operations from the right cabin door at airspeed range of 50−80 KIAS (∼90–150 km/h). The ceiling mounted anchor lines of the NHI’s Parachuting Kit were not usable with the T-10 system. This was due to the static lines’ unsafe behaviour in slipstream when connected to the cabin ceiling level. In conclusion, the NH90 helicopter can be used to meet the Army Command’s requirement for an additional platform for T-10 static line parachutist training. Material dropping, the effect of additional equipment and jumping from the rear ramp should be further studied.

Inneming van Tavasthus in Finlant

Täydellinen nimeke: Inneming van Tavasthus in Finlant, door den Graef van Apraxin etc. nevens de groote nederlage der Zweden, met verlies hunner Trommels en Velt tekenen, en een groot getal van Krygs benden; voorgevallen den 6 van Wynmaent 1713 = Tavasthusa in Finlandia expugnata a Comite Apraxino etc. cum magna clade Suecorum, et jactura tympanorum et vexillorum, multarumque copiarum militarium 6 die Oct: an: 1713.

Russiae et Novae Zemlae maritimae

Julkaisussa: Atlas van zeevaert en koophandel door de geheele weereldt

Hemisphère septentrional pour voir plus distinctoment les terres arctiques

Julkaisussa: Atlas van zeevaert en koophandel door de geheele weereldt

Magnum Mare del Zur cum insula California = De groote Zuyd-Zee en 't eylandt California

Julkaisussa: Atlas van zeevaert en koophandel door de geheele weereldt

Nova et accuratissima totius terrarum orbis tabula = Nieuwe en allernaeukeurigste weereldt-kaert

Julkaisussa: Atlas van zeevaert en koophandel door de geheele weereldt

Mare Balticum : nieuwe pascaert van de Oost Zee

Julkaisussa: Atlas van zeevaert en koophandel door de geheele weereldt

Nova & accuratissima totus terrarum orbis tabula nautica variationum magneticarum index juxta observationes anno 1700 habitas

Julkaisussa: Atlas van zeevaert en koophandel door de geheele weereldt

Totius Europae littora novissime edita : pascaert vertoonende alle de see-custen van Europa

Julkaisussa: Atlas van zeevaert en koophandel door de geheele weereldt