Performance Management of a Next Generation Network

Today's communication networks consist of numerous interdependent network components. To manage these networks and to ensure their reliable and efficient operation to meet the increasing customer usability demands, extensive network management tools are required from the service provider. The goal of this study was to adapt the Next Generation Network (NGN) providing VoIP services within a performance oriented network management system. This study focuses only on NGN network and the project was implemented as an assignment of the Network Operations Center of Elisa Corporation. The theoretical part of this study introduces the network environment of the Elisa NGN platform: its components and used signalling protocols as well as other exploitable communication protocols. In addition, the Simple Network Management Protocol (SNMP) is closely examined since it is commonly used as the basis of IP (Internet Protocol) network management. Also some primary applications enabled by the NGN technology are introduced. The empirical part of this study contains a short overview of the implemented network performance management system and its properties. The most crucial monitored MIB modules, SNMP parameters and implemented performance measurements are described. The trap topology and the role of the traps for management of the NGN platform are considered and finally, the conclusion based on the several disquisitions is made supported with suggestions for future improvements.

Sähköurakoitsijan langattoman mobiiliratkaisun sunnittelu ja toteuttaminen

Kandidaatintyön tavoitteena on suunnitella ja toteuttaa tehokkaampi ajanhallintajärjestelmä sähköalan yritykseen. Ajanhallinnan tehostaminen oli tarkoitus saavuttaa siirtämällä työtuntien seuranta paperilomakkeiden käytöstä sähköiseen tietokantaan johon syötetään tiedot langattomilla päätelaitteilla. Päätelaitteiksi valittiin kämmentietokoneet jotka käyttävät tiedonsiirtoon langatonta lähiverkkoa ja yrityksen ulkopuolella GSMkännykkäverkon datasiirto-ominaisuuksia. Ohjelmisto koottiin useista eri sovelluskomponenteista Groupware-ohjelmistopaketin käyttämisen sijaan. Useiden eri sovellusten käyttö osoittautui virheeksi koska näiden erilaiset käyttöliittymät ja vaihtelevat ominaisuudet hankaloittivat käyttöä. Työn tehokkuutta mitattaessa havaittiin että järjestelmän käyttöönotto oli lisännyt ajanhallintaan liittyvien tehtävien pituutta eikä tehostanut niitä. Tämä johtuu osittain useiden eri sovellusten käytöstä ja niiden ominaisuuksien puutteista.

International Partner Management in the Software Industry

The purpose of this research is to describe how the scope of internationalization affects partner management in software companies. The effects are analyzed separately for small and large companies. Partner management is described from three perspectives: who should manage partnerships, how they should be managed and how does the context affect the choice of management style. Inductive case study is selected as research design. Eventually four case companies are chosen. The findings reveal that the size of the company affects the volume whereas the scope of internationalization affects the choice of partner management activities. Companies with high scope of internationalization required a more formal yet flexible management system whereas companies with low scope of internationalization relied more on the informal relations and personal management.

Creating dynamic continuous improvement system for Larox Corporation

Today´s organizations must have the ability to react to rapid changes in the market. These rapid changes cause pressure to continuously find new efficient ways to organize work practices. Increased competition requires businesses to become more effective and to pay attention to quality of management and to make people to understand their work's impact on the final result. The fundamentals in continmuois improvement are systematic and agile tackling of indentified individual process constraints and the fact tha nothin finally improves without changes. Successful continuous improvement requires management commitment, education, implementation, measurement, recognition and regeneration. These ingredients form the foundation, both for breakthrough projects and small step ongoing improvement activities. One part of the organization's management system are the quality tools, which provide systematic methodologies for identifying problems, defining their root causes, finding solutions, gathering and sorting of data, supporting decision making and implementing the changes, and many other management tasks. Organizational change management includes processes and tools for managing the people in an organizational level change. These tools include a structured approach, which can be used for effective transition of organizations through change. When combined with the understanding of change management of individuals, these tools provide a framework for managing people in change,

Development of Collaborative Product Structure Management

The purpose of this thesis is to develop an environment or network that enables effective collaborative product structure management among stakeholders in each unit, throughout the entire product lifecycle and product data management. This thesis uses framework models as an approach to the problem. Framework model methods for development of collaborative product structure management are proposed in this study, there are three unique models depicted to support collaborative product structure management: organization model, process model and product model. In the organization model, the formation of product data management system (eDSTAT) key user network is specified. In the process model, development is based on the case company’s product development matrix. In the product model framework, product model management, product knowledge management and design knowledge management are defined as development tools and collaboration is based on web-based product structure management. Collaborative management is executed using all these approaches. A case study from an actual project at the case company is presented as an implementation; this is to verify the models’ applicability. A computer assisted design tool and the web-based product structure manager, have been used as tools of this collaboration with the support of the key user. The current PDM system, eDSTAT, is used as a piloting case for key user role. The result of this development is that the role of key user as a collaboration channel is defined and established. The key user is able to provide one on one support for the elevator projects. Also the management activities are improved through the application of process workflow by following criteria for each project milestone. The development shows effectiveness of product structure management in product lifecycle, improved production process by eliminating barriers (e.g. improvement of two-way communication) during design phase and production phase. The key user role is applicable on a global scale in the company.

Use Of Systems Approach with Total Quality Management in Industrial Organizations

The objective of the work has been to study why systems thinking should be used in combination with TQM, what are the main benefits of the integration and how it could best be done. The work analyzes the development of systems thinking and TQM with time and the main differences between them. The work defines prerequisites for adopting a systems approach and the organizational factors which embody the development of an efficient learning organization. The work proposes a model based on combination of an interactive management model and redesign to be used for application of systems approach with TQM in practice. The results of the work indicate that there are clear differences between systems thinking and TQM which justify their combination. Systems approach provides an additional complementary perspective to quality management. TQM is focused on optimizing operations at the operational level while interactive management and redesign of organization are focused on optimization operations at the conceptual level providing a holistic system for value generation. The empirical study demonstrates the applicability of the proposed model in one case study company but its application is tenable and possible also beyond this particular company. System dynamic modeling and other systems based techniques like cognitive mapping are useful methods for increasing understanding and learning about the behavior of systems. The empirical study emphasizes the importance of using a proper early warning system.

Konfiguraationhallinta IT-palvelutoimittajan liiketoiminnassa

Tutkimuksessa selvitetään millainen tietotekniikan liiketoiminta-alalla toimivan palvelutoimittajan konfiguraationhallinnan järjestelmän tulisi olla, ja mitä erilaisia tekijöitä sen suunnittelussa, käyttöönotossa ja hallinnassa pitää ottaa huomioon. Case-tutkimuksessa kartoitetaan vastaavia tekijöitä sovellushallintapalveluja toimittavan yksikön näkökulmasta. Yritysten toiminta perustuu nykyisin ITIL-ohjeistukseen, joka määrittelee yhdeksi ydintoiminnokseen konfiguraationhallinnan prosessin. Tämän prosessin perustana toimii erityinen CMDB-tietokanta. Tutkimuksessa tarkastellaan aluksi CMDB:n suunnitteluvaiheessa huomioon otettavia tekijöitä. Lisäksi tarkastellaan käytön mukanaan tuomia hyötyjä yritykselle ja myös haasteita, joihin käyttöönottoprojektin on pystyttävä vastaamaan. Tarkka tavoitteiden asettaminen, johdon ja henkilöstön sitoutuminen sekä vaiheittainen osa kerrallaan tapahtuva käyttöönotto ovat ne tekijät, joilla haasteisiin voidaan vastata. Hyvällä muutoshallinnalla voidaan varmistaa jatkuvan palvelun vaiheessa se, että järjestelmän tiedot pysyvät ajan tasalla ja oikeina.

Indicent reporting in shipping. Experiences and best practices for the Baltic Sea

Incident and near miss reporting is one of the proactive tools of safety management. By analyzing incidents and near misses and by corrective actions, severe accidents can potentially be avoided. Near miss and incident reporting is widely used in many riskprone industries such as aviation or chemical industry. In shipping incident and near miss reporting is required by the mandatory safety management system International Safety Management Code (ISM Code). However, in several studies the conclusion has been that incidents are reported poorly in the shipping industry. The aim of this report is to highlight the best practices for incident reporting in shipping and to support the shipping industry in the better utilization of incident reporting information. The study consists of three parts: 1) voluntary, shared reporting systems in shipping (international experiences), 2) interview study at four shipping companies in Sweden and in Finland (best practices), 3) expert workshop on incident reporting (problems and solutions). Preconditions for a functional reporting system are an existing no blame culture, commitment of the top management, feedback, good communication, training and an easy-to-use system. Although preconditions are met, problems can still appear, for example due to psychological, interpersonal or nationality-related reasons. In order to keep the reporting system functioning, the shipping company must be committed to maintain and develop the system and to tackle the problems. The whole reporting process from compiling, handling and analyzing a report, creating corrective actions and implementing them has to be handled properly in order to gain benefits from the reporting system. In addition to avoiding accidents, the functional reporting system can also offer other benefits by increasing safety awareness, by improving the overall safety and working conditions onboard, by enhancing team work and communication onboard and between ships and the land-based organization of shipping companies. Voluntary shared reporting systems are supported in the shipping industry in principle, but their development in the Baltic Sea is still in its infancy and the potential benefits of sharing the reports have not been realized. On the basis of this study we recommend that a common reporting system be developed for the Baltic Sea area which all the ships operating in the area could use regardless of their flag. Such a wider system could prevent some of the problems related to the current national systems. There would be more incident cases available in the database and this would support anonymity and thus encourage shipping companies to report to a shared database more frequently. A shared reporting system would contribute to the sharing of experiences and to the wider use of incident information in the shipping industry.

Loviisan ydinvoimalaitoksen kaapelireittien tiedonhallinnan kehittäminen paloriskitutkimusta varten

Tässä diplomityössä kehitetään Loviisan voimalaitoksen todennäköisyyspohjaisen paloriskianalyysin kaapelitietokantaa tulevaisuuden haasteita varten. Tietokannan kehittämistä varten tutustutaan todennäköisyyspohjaiseen riskianalyysiin varsin-kin paloriskianalyysin osalta. Käytännönläheisempää kehittämistä varten tutustu-taan voimalaitoksella nykyisin käytössä oleviin kaapelitietokantoihin: paloriski-tutkimusta varten laadittuun PSA-ELTIEen, kunnossapidon tiedonhallintajärjes-telmä LOMAXiin, sähkö- ja automaatiosuunnitteluyksikköjen arkistoihin sekä automaatiouudistuksen tietokantaan. Tietokannan käytännönläheisempien ominai-suuksien selvittämiseksi voimalaitoksella kokeiltiin kenttätarkastusmenetelmää, joka on ensisijainen kaapelikartoitusmenetelmä. Tietokantoihin tutustumisen perusteella vaihtoehtoisiksi tulevaisuuden tietokan-noiksi mietittiin LOMAXia, PSA-ELTIEtä tai uutta tietokantaa. Tulevaisuuden tietokantavaihtoehdoksi on päädytty ehdottamaan LOMAXia, joka vaatii vähem-män muutoksia muihin vaihtoehtoihin nähden. Tällainen laajalti käytössä oleva yhteinen tietokanta mahdollistaa sen, että tiedot ovat helpommin ja varmemmin kaikkien niitä tarvitsevien käytettävissä ja asiantuntijoiden muokattavissa, millä myös varmistetaan tietojen oikeellisuutta ja pysymistä ajan tasalla. Tulevaan LOMAX päivitykseen on ehdotettu tarpeellisia tietokenttien lisäyksiä ja kaapeli-hierarkian parantamista kaapelitietokannaksi käyttöönottamista varten.

Model-Based Management

Tämä kandidaatintyö on kirjallisuustutkimus, joka selventää lukijalle mitä tarkoittaa käsite Model-Based Management (MBM). Työssä tarkastellaan keskeisiä suuntauksia, joihin MBM pohjautuu. Lisäksi tutkitaan miksi MBM on kehittynyt ja miten sitä voidaan hyödyntää yrityksissä. Nykyiset käytössä olevat johtamismallit ovat aikaansa jäljessä, eivätkä ne hyödynnä nykyteknologian luomia mahdollisuuksia. Teknologian kehityksen myötä tiedonsaanti on helpottunut ja monipuolistunut. Globalisaation seurauksena organisaatioiden toimintaympäristöt ovat monimutkaistuneet ja organisaatioiden rakenteet ovat muuttuneet. Tiedonsaannin helppous yhdistettynä yritysten monimutkaisiin rakenteisiin aiheuttaa ongelmia yrityksen johtamisen ja hallinnan kannalta. Johtajat eivät kykene ymmärtämään kokonaisuuksia, joiden kanssa he ovat tekemisissä. Kokonaisuuksien ymmärtämisessä hyödynnetään systeemiajattelua ja mallintamista. Malleja on käytetty yrityksissä jo pitkään johtamisen apuna. MBM pohjautuu siihen, että mallit ovat johtamisen lähtökohta. Mallit auttavat ymmärtämään kokonaisuuksia ja hahmottamaan eri tekijöiden yhteyksiä toisiinsa. MBM:n näkökulmasta organisaation rakenteiden mallintaminen on elintärkeää sen toimintakyvyn kannalta.

Advanced Islandora Workshop

Workshop at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Waste Management in Commercial Activity: State-of-the-Art and the Potential Innovation in the Urban Areas of Hanoi, Vietnam

As the rapid development of the society as well as the lifestyle, the generation of commercial waste is getting more complicated to control. The situation of packaging waste and food waste – the main fractions of commercial waste in different countries in Europe and Asia is analyzed in order to evaluate and suggest necessary improvements for the existing waste management system in the city of Hanoi, Vietnam. From all waste generation sources of the city, a total amount of approximately 4000 tons of mixed waste is transported to the composting facility and the disposal site, which emits a huge amount of 1,6Mt of GHG emission to the environment. Recycling activity is taking place spontaneously by the informal pickers, leads to the difficulty in managing the whole system and uncertainty of the overall data. With a relative calculation, resulting in only approximately 0,17Mt CO2 equivalent emission, incinerator is suggested to be the solution of the problem with overloaded landfill and raising energy demand within the inhabitants.

Financial controlling and management in recovered paper joint ventures

The objective of this Master’s thesis is to examine financial functions, controlling and management in joint ventures of Manufacturing Corporation Oyj Recovered Paper business area. This case study investigated the current situation of financial functions and find out causes that have led the situation. Current situation of financial functions in joint ventures is variable. The most of the companies is outsourced at least some tasks. However, narrow reporting and problems in reliability are the biggest lack of financial controlling and management. The result of study consists of two parts: short-term and long-term improvement. Short-term improvement includes selected solution to outsource all routine financial tasks to new outsourcing partner and improve financial functions. Long-term improvements aim to create better controlling and management system to joint ventures. It is formed corporate governance and performance measurement. In this study it developed new Balanced Scorecard (BSC) for recovered paper joint ventures. Dimensions of BSC are quality, delivery (time), price and financial controlling and management. Earlier researched are showed problems in success of joint venture relationships. Similar results are obtained in this study. In future research, suitable of developed Balanced Scorecard for other industries could be studied

The Design and Implementation of a SD Card File System

SD card (Secure Digital Memory Card) is widely used in portable storage medium. Currently, latest researches on SD card, are mainly SD card controller based on FPGA (Field Programmable Gate Array). Most of them are relying on API interface (Application Programming Interface), AHB bus (Advanced High performance Bus), etc. They are dedicated to the realization of ultra high speed communication between SD card and upper systems. Studies about SD card controller, really play a vital role in the field of high speed cameras and other sub-areas of expertise. This design of FPGA-based file systems and SD2.0 IP (Intellectual Property core) does not only exhibit a nice transmission rate, but also achieve the systematic management of files, while retaining a strong portability and practicality. The file system design and implementation on a SD card covers the main three IP innovation points. First, the combination and integration of file system and SD card controller, makes the overall system highly integrated and practical. The popular SD2.0 protocol is implemented for communication channels. Pure digital logic design based on VHDL (Very-High-Speed Integrated Circuit Hardware Description Language), integrates the SD card controller in hardware layer and the FAT32 file system for the entire system. Secondly, the document management system mechanism makes document processing more convenient and easy. Especially for small files in batch processing, it can ease the pressure of upper system to frequently access and process them, thereby enhancing the overall efficiency of systems. Finally, digital design ensures the superior performance. For transmission security, CRC (Cyclic Redundancy Check) algorithm is for data transmission protection. Design of each module is platform-independent of macro cells, and keeps a better portability. Custom integrated instructions and interfaces may facilitate easily to use. Finally, the actual test went through multi-platform method, Xilinx and Altera FPGA developing platforms. The timing simulation and debugging of each module was covered. Finally, Test results show that the designed FPGA-based file system IP on SD card can support SD card, TF card and Micro SD with 2.0 protocols, and the successful implementation of systematic management for stored files, and supports SD bus mode. Data read and write rates in Kingston class10 card is approximately 24.27MB/s and 16.94MB/s.

Yksittäistuotannon ohjattavuusanalyysi

Tässä työssä tutkitaan Merima Oy:n tuotantolaitoksen toimintaa ohjattavuusanalyysillä. Työn tarkoituksena on etsiä potentiaalisia kehityskohteita yrityksen tuotannosta. Yrityksen tuotanto on muutospaineessa ja se tarvitsee kvantitatiivista informaatiota kehityksen suunnannäyttäjäksi. Työ aloitettiin jalostamalla yrityksen tuotannonohjausjärjestelmästä saatava data analysoitavaan muotoon. Tämän jälkeen päätettiin analyysityypeistä, joita työssä käytetään. Analyysivaiheessa jalostettu data saatettiin informoivaan muotoon, jonka jälkeen voitiin analysoida tuloksia ja tehdä johtopäätöksiä. Työn tuloksena saadaan joukko kehityskohteita, joihin kehityspanos tulisi fokusoida. Lisäksi raportin lopussa pohditaan keinoja kehityskohteiden parantamiseksi.